HW 4 Solution: Number of Ducts Around 52 To 58 Is OK Estimated Deflection Around 7-8 CM at The Tip
The document provides guidance on an HVAC duct design, stating that having between 52 to 58 ducts would be acceptable. It estimates the deflection, or bending, at the tip of the ducts would be around 7-8 centimeters. The document appears to be evaluating and providing feedback on a proposed HVAC duct system design.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
47 views1 page
HW 4 Solution: Number of Ducts Around 52 To 58 Is OK Estimated Deflection Around 7-8 CM at The Tip
The document provides guidance on an HVAC duct design, stating that having between 52 to 58 ducts would be acceptable. It estimates the deflection, or bending, at the tip of the ducts would be around 7-8 centimeters. The document appears to be evaluating and providing feedback on a proposed HVAC duct system design.
Duct Element Duct Section Width (MM) Height (MM) Air Flow RATE (CFM) AIR Flow Rate (L/S) AIR Flow Rate (m3/s) Duct Length (M) No - of Fittings Friction Loss For St. Duct (Pa/m)