CALL FOR PAPERS

April 8 - 10, 2014 Detroit, Michigan USA

Abstracts must be submitted online via www.sae.org/congress/ to only ONE session. Upon submission, you will receive an automatic reply with your paper offer number. If you do not receive a paper offer number at that point, please retry on-line submission or email [email protected]. Offered papers shall not have been published outside of SAE; and if accepted, contributors will not release their paper for publication through other media.

SAE 2014 World Congress

2014 Host Company

The following information will be required during the on-line submission process: 1. A summary that states the objective of the paper/presentation; 2. Tentative title; 3. Name of the author and co-authors and all contact information; 4. Selection of the most appropriate technical session.

Paper acceptance will be based on organizer moderated peer review of a review ready manuscript. Refer to the author resources site at http://volunteers.sae.org/authors.htm for other useful information in preparing your paper.

ELECTRONICS & ELECTRICAL SYSTEMS

Testing & Instrumentation Remote Communications and Data Analysis New Test Methodologies and Information Management On-board Instrumentation and Diagnostics Component / System Simulation Software/Hardware System Equipment and Innovations System Software Testing & Validation IVHM Prognostics Electrical & Electronic Systems Electrical Wiring Harnesses Electro-mechanical Designs Electronics Reliability Model-Based Design and In-Vehicle Software Multi-Media Systems Software Safety Systems Systems Engineering Vehicle Sensors & Actuators Telematics Systems / Vehicle Navigation/ HMI Auxiliary Controls Electronic Components and Microprocessors Electronic Engine Controls On Board Diagnostics Connected Vehicle Smart Vehicle / Smart Infrastructure Smart Grid Technologies EV Infrastructure Vehicle Information and Communication Intelligent Transportation Systems CAD/CAM/CAE Design Simulation & Design Tools Digital Modeling Rapid Prototyping Virtual Development Interior Electronics Lighting Technology

PROPULSION/POWERTRAIN
Hybrid and Non-Traditional Powertrains Advanced Hybrid Vehicle Powertrains Fuel Cell Power Systems EV Powertrains Advanced Battery Technologies Natural Gas Engines and Vehicles Hydrogen IC Engines Power Electronics Fuel & Additive Effects on Combustion Alternative and Advanced Fuels Fuel Injection & Sprays Fuel & Additive Effects on Engine Performance Compression Ignition Engines CI Engine Modeling Cold Start & Transients Kinetically Controlled CI Combustion (HCCI) Partially Premixed Combustion Mixing Controlled (Diesel) Combustion In-Cylinder Diesel Particulate & NOx Control New Diesel Engines & Components Lubricant Diagnosis and Management Systems Spark Ignition Engines SI Engine Modeling Direct Injection SI Engine Technology New SI Engine & Component Design Two-Stroke Engines Rotary Engines SI Combustion High Efciency and Reduced CO2/km ) Waste Heat Recovery Engine Downsizing and Downspeeding Variable Valvetrain Technologies Small High-Efciency Engines Control and Optimization Powertrain Control and Optimization Powertrain Actuators and Sensors Combustion Control and Optimization Engine Components and Subsystems Advanced Turbochargers & Power Boost Engine Breathing Systems Power Cylinder Systems Variable Valve Actuation Systems Electronic Engine Controls On Board Diagnostics Lubricants Engine Oils Heavy Duty Diesel Lubricants Transmission and Axle Lubricants Lubricant R&D to Improve Vehicle Performance Transmissions & Drivelines Clutch Systems & Controls Gear Systems & Driveline Launch Devices New Transmission Systems Hybrid Transmissions CVT/IVT Transmission & Driveline NVH Engine Flows and Combustion Diagnostics In-Cylinder Velocity Measurements Heat Transfer and Advances in Thermal &Fluid Sciences Multi-Dimensional Modeling Vehicle & Engine Systems Analysis & Modeling

ENVIRONMENT / EMISSIONS/ SUSTAINABILITY

Emissions Advanced Catalyst Technology Cold Start Emissions Control Technologies Diesel Exhaust Emission Control (DPF Substrates & Systems, Durability, HCDeNOx, Modeling, New Developments, SCR) Emissions Measurement & Testing Emissions Processes for SI Engines Particulate Emissions from Direct Injection Gasoline Engines Gas Direct Injection Aftertreatment Lean NOx Catalysts LEV and ULEV Emissions Non-Thermal Plasma Aftertreatment Substrate Technology Surface Engineering & Tribology Thermal Systems Climate Control Thermal Systems Components Thermal Systems for Electric & Hybrid Vehicles Thermal Systems Modeling & Simulation Energy Efciency of Thermal Systems Sustainable Systems Intelligent Highways & Guidance Systems Low VOC for Interiors Energy Efcient Manufacturing Design for Sustainability Vehicle Ownership/Usage Alternatives (shared ownership, renting, etc) GHG Emissions Reduction Integration of Transportation Systems into Urban Environments Mass Transit and Regional Transit Systems in an Era of Mega-Cities Sustainable and Energy Efcient Manufacturing Advances in Alternative Energy Sources for Sustainable Development in the Transportation Sector Sustainable Materials and Components LCA and Sustainability Vehicle Electrication Strategies for Sustainability End of Life Management: Reuse/ Recycle/ Remanufacture Megatrends in Sustainability Reliability of Transportation System Design HEV Battery Management at End of Life (EOL)

SAFETY / TESTING
Connected Vehicle V2V/V2I Safety Applications Activity Safety Lane Departure Warning/Lane Keeping Assistance Collision & Blindspot Warning Active Pedestrian Protection Backover Protection Collision Imminent Braking Collision Avoidance Occupant Protection Air Bag/Suppression Belt Restraints Child Passenger Restraints Biomechanics Pedestrian Safety Integrated Safety Systems CAE Methods in Crash Safety Applications Occupant Safety Rollover Rear & Side Impact Accident Reconstruction Event Data Recorders Computer Applications for Crashworthiness Vehicle Aggressivity & Compatibility in Crashes Safety Test Methodology Safety Critical Systems Collision Avoidance Pre-crash sensing Fire Safety Fire Statistics & Analysis Material Flammability & Fire Experiments Underhood and Electrical Fires Hydrogen Vehicle Fire Safety Suppression Systems Body Design & Engineering Design Optimization: Methods & Applications Body Structures Corrosion Prevention Digital Human Modeling Glass Applications Human Factors Seating Vision and Visibility Comfort Mobility Telematics Lighting Technology Aerodynamics Wiper Systems Steering, Chassis & Suspension Steering/Suspension Components & Systems Tires & Wheels Component design/test technologies Simulation/modeling Testing and performance evaluation Vehicle Dynamics and Simulation Passive/active Stability control systems Simulation and modeling Motorsports Safety Vehicle/Chassis Tires Testing/Simulation Aerodynamics Powertrain Fuels & Lubricants Materials Green Motorsports Alternative Energy Systems & Sources Noise, Vibration and Harshness Engine/Powertrain/Drivetrain Vehicle Exterior Numerical Methods NVH Measurement Passive and Active NVH Control Standards/Process Vehicle Subsystem NVH

MATERIALS
Ferrous Advances in Bar Steel & Heat Treatment Technology Castings Coated Materials Exterior Body Panels Fatigue Research & Applications Stainless Steel Stamping Technology Non-Ferrous Aluminum Applications Magnesium Vehicles Structures & Applications Specialty Alloys Materials Modeling & Testing Welding & Joining & Fastening Modeling of Materials for Crash Applications Experiments in Automotive Engineering Load Simulation & Vehicle Performance CAE Durability Analysis & Applications Polymers & Coatings Bumper Systems Painting Coatings Components, Process & Technologies Elastomers & Plastics for Fuels, Oils & Fluids Instrument Panels Interior Trim Composites Seals, Gaskets & Rubber Products Seating Materials & Design Low VOC Materials Nanotechnology for Automotive Applications Bearings, Lubricant Systems & Tribology Biomaterials

INTEGRATED DESIGN AND MANUFACTURING

CAD/CAM/CAE Design Simulation & Design Tools Digital Modeling Rapid Prototyping Virtual Development Virtual Engineering E-manufacturing Accelerated Testing and Vehicle Reliability OEM Global Supply Chain Aftermarket Supply Chain Reliability & Robust Design in Automotive Engineering Axiomatic Design Design for Six Sigma Design for Manufacturing Six Sigma Reliability Testing and DOE Modeling & Validation Accelerated Reliability & Durability Testing Lean Manufacturing for the Mobility Industry Concurrent Engineering Leadership for Lean Safety

NEW

DEAD

LINE

Deadline for submitting paper offers ...................................September 1, 2013 Review Ready Manuscripts due to session organizers ........... October 15, 2013 Final Manuscripts due to SAE .................................................. January 28, 2014

Abstracts will be conrmed after September 1. P130112