Scribd
Upload
104 views1 page

Using The Agilent Intuilink Software: Oscilloscopes, 54600-Series Version 3.1

The document provides instructions for using the Agilent Intuilink software to transfer oscilloscope data into an Excel spreadsheet. It explains that the camera icon takes screenshots of the oscilloscope display and the x,y icon transfers data and adds an x-y chart. It also notes that a stable oscilloscope display is required before averaging or transferring data, and may require adjusting the trigger or using the average display function.

Uploaded by

Pedro Prado
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
104 views1 page

Using The Agilent Intuilink Software: Oscilloscopes, 54600-Series Version 3.1

The document provides instructions for using the Agilent Intuilink software to transfer oscilloscope data into an Excel spreadsheet. It explains that the camera icon takes screenshots of the oscilloscope display and the x,y icon transfers data and adds an x-y chart. It also notes that a stable oscilloscope display is required before averaging or transferring data, and may require adjusting the trigger or using the average display function.

Uploaded by

Pedro Prado
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Using the Agilent Intuilink Software Usage: Run Excel or click the Excel 546 icon.

A blank Excel spread sheet appears. Close the Agilent announcement window. On the upper right hand corner of the toolbar, you will find the following icons:

The camera icon gives you a screen shot of the oscilloscope. The ~ x,y icon transfers data into the spreadsheet and add an x-y chart. Reminder: You need to get a stable display on the oscilloscope at the first place. If the waveform is not stable, adjust the trigger control. If the trace is noisy, you should push the Display button and select Average. You can average 8, 64, or 256 traces. Without a stable display, you cant do averaging. Site to Download Intuilink: we.home.agilent.com/USeng/nav/-536889956.536882050/pd.html?JPID=/find/intuilink Program to Download: Oscilloscopes, 54600-series version 3.1; Run the program or save it to the hard drive. Installation: Run the downloaded program with all default conditions. Two icons will be added to the desktop:

You might also like