JUE-85 Operation Guide 7ZPSC0213

Inmarsat-C JUE-85
DISTRESS ALERT TRANSMISSION PROCEDURES

Caution DO NOT REQUEST THE DISTRESS ALERT EXCEPT IN AN EMERGENCY. The Distress Alert is routed to RCC (Rescue Coordination Center). If the false Distress Alert is transmitted, take the following instructions immediately. (1) Turn off the power switch of IME to stop the transmission, immediately. (Transmission is released when you take off your finger from the button within 4 seconds) (2) Report the following information to the Nearest Maritime Safety Office or Station or the Operations Center, Administration Division, Guard & Rescue Department, Maritime Safety Agency (TLX: +72-222-5193 JMSAHQ J, TEL: +81-3-3591-9000). (a) Ships Name, Type, and Flag (b) Main ID Number (c) Position and Time at the false transmission (d) Cause of the false transmission 8 RESET button (Use to reset the Main Unit) (e) MES type, Serial Number and Delivery Date Register the distress message in advance before transmitting the Distress Alert at the distress window in Main menu. Distress alert is retransmitted after the device is restarted, when disconnection is occurred in the device momentary during the Distress Alert transmitting. However, please note that Distress Alert is not retransmitted in the following cases. (1) (2) (3) IMEFront view (4) When power switch of the device is turned OFF/ON When power switch of External power supply unit is turned OFF/ON When the ship is recovered from blackout When a random failure is occurred on the device (Use to send Distress alert transmission) 9 DISTRESS button
JUE-85
Operation Guide
Inmarsat-C
Operation Guide
Note 2: When the entered LES ID is closed, or the selected LES ID is in the other ocean region, then following window is displayed. Press F10 (Previous) key and enter the correct LES ID.
ERROR
Selected LES does not operate in this
ocean.
F10: Previous
Example of ERROR window (LES is not available)
Name and Indication of Lamps and Buttons
7 DISTRESS Lamp
6 RECEIVE Lamp
5 TRANSMIT Lamp
4 LOG IN Lamp
3 SYNC Lamp
2 POWER Lamp
1 POWER Switch (MES power ON/OFF)
The Lamp indicates MES status Not Lighting MES power off Reception is not available
Transmission procedure Step 1 DB* Operation DTE Response Remarks
NAME of Lamp
Lighting
(2) POWER Lamp
MES power on
(3) SYNC Lamp
Reception is available Blinks when the MES changes channel between NCS and TDM. Log out Standing by No message Message received and output it to DTE and/or Printer Idle State
Open hinged cover and DTE displays SOS. If you do not want to initiate press DISTRESS button The buzzer starts sounding a Distress Alert, till the buzzer sounds. immediately release the 0.5 seconds ON and button within 4 seconds. 1.0 seconds OFF. 2
(4) LOG-IN Lamp
Log in
(5) TRANSMIT Lamp
Transmitting
(6) RECEIVE Lamp
Message receiving
Distress Alert is transmitted after continuously pressing DISTRESS button for 4 seconds or more.
The buzzer sounds continuously. DTE displays Distress Alert Transmission is succeeded.
When the JUE-85 is tuning to LES channel, the SYNC LED lights on and off. The distress message registered in main unit is transmitted.
(7) Distress Lamp
High-priority Message receiving or transmitting
*DBDistress Button Note: 1) Please register the Distress message to the Distress window in main menu beforehand, prior to transmitting the Distress Alert. 2) To stop Distress alert transmission, press X key while holding down Ctrl key. CODE: 7ZPSC0213
Inmarsat-C JUE-85
Step 13 Operation
Operation Guide
Inmarsat-C
When the setting of the posItion is changed, press Enter key. When the ships position is included the transmitting message, select oN and press Enter key. When the ships position is not included, select Off and press Enter key. 15 When the setting of the characTer code is changed, press Enter key. 16
JUE-85
Operation Guide
Transmitting E-mail (Special Access Network) message

Example of Special access network window Special access network : abcdefg : TEST.MSG
14
DTE Response
Remarks
The cursor is moved to right entry field.
Special access code File name
The cursor is moved to characTer code.
land Earth station(les)

posItion characTer code delivery Confirmation F1: Send call F10: Previous
17
:
: : : oN Off Ia5 Data oN Off
203 (Yamaguchi)
Select the characTer code and Enter key.
The cursor is moved to delivery Confirmation.
Transmission Procedure
Step 1 Move the cursor to Transmit and press Enter key. Move the cursor to the Special access network and press Enter key. Move the cursor to the Special access code and press Enter key. The cursor is moved to File name. The cursor is moved to right entry field. Ask LES a special access code. The Special access network window is displayed. The Transmit window is displayed. Special access network is optional facility for each LES. 19 2 Operation DTE Response Remarks 18
When the setting of the delivery Confirmation is changed, press Enter key.
When the delivery confirmation is requested to LES, select oN and press Enter key. When the delivery confirmation is not requested to LES, select Off and press Enter key. After confirmation of each parameter, press F1 (Send Call) key. 20 Press F10 (Previous) key to transmit the message.
The cursor is moved to characTer code. The special access code window is displayed.
WARNING, Cannot display binary text, F10: Previous is displayed.
Type the Special access code (Numbers or Alphabets, 6-digit maximum) and press Enter key. Ex. clink c l i n k Enter When the file is selected, press Enter key. Press F2 (File selection) key. Select the file by , .key and press Enter key. Confirm the contents, then press F10 (Previous) key. Press F10 (Previous) key to return the Special access network window. When the LES is selected, press Enter key. Press F2 (Les list) key. The cursor is moved to right entry field. The File list window is displayed. The contents of the file are displayed. The File list window is displayed. The cursor is moved to land Earth station (les). The cursor is moved to right entry field. The Les list window is displayed. Select the LES ID by , key and press Enter key. The cursor is moved to posItion.
When the message print on function is turned on, the call time, date destination number, LES ID are displayed. Main menu is displayed.
It normally takes about 3-5 minutes to complete the communication.
5 6 7 8 9
Note 1: When the file is not in the DTE memory or in the floppy diskette, ERROR, The file is missing. Confirm the file name. is displayed. Then press F10 (Previous) key and enter the new file name.
When the file name is knowledge, type the file name directly. (Note 1)
ERROR
The file is missing.
Confirm the file name.
F10: Previous
10 11
Example of ERROR window (File missing)

When the JUE-85 is not synchronized to satellite, the blank list is displayed. When the LES ID is knowledge, type the LES ID directly. (Note 2)
12

JUE-85 Operation Guide 7ZPSC0213

Uploaded by

Copyright:

Available Formats

JUE-85 Operation Guide 7ZPSC0213

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

JUE-85 Operation Guide 7ZPSC0213

Uploaded by

Copyright:

Available Formats

Inmarsat-C JUE-85

DISTRESS ALERT TRANSMISSION PROCEDURES

Selected LES does not operate in this

Example of ERROR window (LES is not available)

Name and Indication of Lamps and Buttons

1 POWER Switch (MES power ON/OFF)

Transmission procedure Step 1 DB* Operation DTE Response Remarks

(2) POWER Lamp

(3) SYNC Lamp

(4) LOG-IN Lamp

(5) TRANSMIT Lamp

(6) RECEIVE Lamp

(7) Distress Lamp

High-priority Message receiving or transmitting

Transmitting E-mail (Special Access Network) message

The cursor is moved to right entry field.

Special access code File name

The cursor is moved to characTer code.

land Earth station(les)

The cursor is moved to right entry field.

Select the characTer code and Enter key.

The cursor is moved to delivery Confirmation.

The cursor is moved to right entry field.

WARNING, Cannot display binary text, F10: Previous is displayed.

It normally takes about 3-5 minutes to complete the communication.

The file is missing.

Confirm the file name.

Example of ERROR window (File missing)

You might also like