Scribd
Upload
43 views2 pages

Elements of Mechatronics - ME0304

This document contains an exam for a Mechatronics engineering course. It has two parts: Part A contains 9 multiple choice questions about microprocessors, interrupts, flags, electromagnetism, shift registers, and PLC applications. Part B contains two essay questions, with options to answer either part a or part b for each question. The first question covers the architecture of the 8085 microprocessor or recent developments in microprocessors and input/output communication. The second question is about stepper motors or PLCs, including internal relays, shift registers, and a ladder logic program example.

Uploaded by

Ruby Smith
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
43 views2 pages

Elements of Mechatronics - ME0304

This document contains an exam for a Mechatronics engineering course. It has two parts: Part A contains 9 multiple choice questions about microprocessors, interrupts, flags, electromagnetism, shift registers, and PLC applications. Part B contains two essay questions, with options to answer either part a or part b for each question. The first question covers the architecture of the 8085 microprocessor or recent developments in microprocessors and input/output communication. The second question is about stepper motors or PLCs, including internal relays, shift registers, and a ladder logic program example.

Uploaded by

Ruby Smith
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Department of Mechanical Engineering SRM University - Ramapuram Campus Cycle Test II Elements of Mechatronics ME0304 Time: 90 minutes IIIyear

ar / 6th Semester Part A (9 x 2 = 18 marks) Answer all the questions 1. What is a Microprocessor? 2. What is a Program Counter? 3. List out the hardware interrupts in 8085. 4. What is the difference between maskable and non-maskable interrupt? 5. What are the various flags used in 8085? 6. Define the electromagnetic principle. 7. What is the function of Relay? 8. What is a shift register? 9. Give some examples for PLC application. Marks : 50 Answer all the questions

Part B (2 x 16 = 32 marks)

10. a. Explain the architecture of 8085 with a neat block diagram. OR b. i. Discuss about the recent developments in Microprocessors and Microcontrollers. 10 ii. Explain about the input, output and memory units used for communication with Microprocessors. 6

11. a. Explain the principle, construction and working of a Stepper motor with neat diagram. Give its advantages, limitations and applications. OR b. i. What is a PLC? Explain about the internal relays used with PLC. 10 ii. Write a simple program for PLC using Ladder diagram. 6 *** *** ***

Department of Mechanical Engineering SRM University - Ramapuram Campus Cycle Test II Elements of Mechatronics ME0304 Time: 90 minutes IIIyear / 6th Semester Part A (9 x 2 = 18 marks) Answer all the questions 1. What is the function of ALU in 8085? 2. What is a Program Counter? 3. What is the function of Flip Flop in 8085? 4. What is the difference between maskable and non-maskable interrupt? 5. What is the function of Stack Pointer? 6. Define the electromagnetic principle. 7. What is Mnemonics? 8. Give some examples for PLC application. 9. What is function of internal relay used with PLC? Marks : 50 Answer all the questions

Part B (2 x 16 = 32 marks)

10. a. Explain the pin diagram of 8085 with a neat diagram. OR b. i. Discuss about the recent developments in Microprocessors and Microcontrollers. 7 ii. Explain with block diagrams, A/D and D/A convertors. 9

11. a. Explain the principle, construction and working of a Servo motor with neat diagram. Give its advantages, limitations and applications. OR b. i. What is a PLC? Explain about the shift registers used with PLC. 10 ii. Write a simple program for PLC using Ladder diagram. 6 *** *** ***

You might also like