Scribd
Upload
2K views1 page

Coagulants For Water Treatment: Application Features

INDFLOC 238LT is a liquid coagulant based on polyamines used for water clarification and efficient removal of colloidal silica from boiler feed water. It can be used independently or with other inorganic coagulants or polyacrylamide flocculants. The product has a pale yellow to colorless liquid appearance, is cationic, and has a pH of 2-5 and viscosity of 2,000-10,000 cps. It provides benefits such as rapid floc formation, settling, removal of colloidal silica, reduction of organics, and improved filtrate clarity and throughput. The document provides directions for manual or pumped use of INDFLOC 238LT by preparing stock and feed

Uploaded by

SIVAPATHASEKARAN
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Coagulants For Water Treatment: Application Features

INDFLOC 238LT is a liquid coagulant based on polyamines used for water clarification and efficient removal of colloidal silica from boiler feed water. It can be used independently or with other inorganic coagulants or polyacrylamide flocculants. The product has a pale yellow to colorless liquid appearance, is cationic, and has a pH of 2-5 and viscosity of 2,000-10,000 cps. It provides benefits such as rapid floc formation, settling, removal of colloidal silica, reduction of organics, and improved filtrate clarity and throughput. The document provides directions for manual or pumped use of INDFLOC 238LT by preparing stock and feed

Uploaded by

SIVAPATHASEKARAN
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

238LT

Coagulants for Water Treatment


Application
INDFLOC 238LT is liquid coagulant based on polyamines used in water clarification. They may be used independently or supplemented with inorganic coagulants or with Flocculants based on polyacrylamide. INDFLOC 238LT is efficient in removal of colloidal silica from boiler feed made-up for high-pressure boilers. These coagulants can be used for efficient removal of organics oil and suspended solids from potable and process water. Product Data Appearance Ionic Character pH Viscosity (cps) INDFLOC 238LT Pale Yellow to Colorless Liquid Cationic 2 to 5 2,000 10,000

Features
Ready to use liquid Rapid settling Efficient removal of colloidal silica Sizable reduction in organics Improved clarity in filtrate Increased throughputs

Direction for Use

Benefits
Good floc formation Rapid settling Efficient removal of colloidal silica Sizable reduction in organics Improved clarity in filtrate Increased throughputs

INDFLOC 238 LT Polymers may be unloaded manually or pumped directly into the dilution tank from the container. Prepare stock solution (1.0 to 1.5%w/v) of the polyelectrolytes using clear filtered water. Prepare feed solution by diluting the stock solution about ten times directly or by on-line using filtered water. For small chemicals can be dosed by gravity or by dosing equipment. However, for large systems use of dosing system is recommended for optimum efficiency. Ion Exchange India Ltd., will recommend the dosing equipment best suited for your requirement.

Handling
Do not store the material in open. Keep the container tightly closed when not in use. These products exhibit very low order of oral toxicity. No special care is required in handling this product.

Ion Exchange LLC 46722, Fremont Blvd., Fremont, CA 94538, USA. Phone: 408 649 5639 Fax: 408 649 5658 Email: [email protected] Website: www.ionexchangeglobal.com

You might also like