Scribd
Upload
208 views2 pages

AP7723

The document describes an automatic transfer switch that provides redundant power from two sources to equipment. It has dual power inputs and will seamlessly switch to the secondary power source if the primary fails without interrupting equipment. It provides both electrical specifications and physical dimensions of the switch.

Uploaded by

Vivek Bhardwaj
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
208 views2 pages

AP7723

The document describes an automatic transfer switch that provides redundant power from two sources to equipment. It has dual power inputs and will seamlessly switch to the secondary power source if the primary fails without interrupting equipment. It provides both electrical specifications and physical dimensions of the switch.

Uploaded by

Vivek Bhardwaj
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Automatic Transfer Switch

Overview
The American Power Conversion (APC) Rack Automatic Transfer Switch (ATS) provides reliable, redundant power to single-corded equipment. The Rack ATS has dual input power cords supplying power to the connected load. If the primary source becomes unavailable, the Rack ATS will seamlessly source power from the secondary source without interrupting critical loads. Networked units have built-in network connectivity, which allows for remote management via Web, SNMP, or Telnet interfaces.

Rear viewAP7723

Item

Description/Function

 Power inlets

The two (2) C20 inlets support the connection of two power cords (not provided) to link the ATS to two separate power sources (A, B). The switch draws power from the preferred source and automatically switches to the secondary source when necessary. The outlets connect the ATS to equipment in the rack or enclosure, providing a redundant source of power to the connected equipment. Each switch has eight (8) C13 outlets and one (1) C19 outlet.

 Outlets

Specifications
AP7723 Electrical
Nominal input voltage Acceptable input voltage Input frequency Input connectors Output connectors Maximum output current (outlet) Maximum output/input current Overload protection Internal External (recommended) Transfer time 208 or 230 Vac (software selectable) 10% of nominal 50/60 Hz Two (2) C20 inlets Eight (8) C13 outlets One (1) C19 outlet 10 AC13, 12 A for North America 16 AC19 16 A Not provided with unit 16 A facility provided 812 ms typical, 16 ms maximum 60 Hz, 18 ms maximum 50 Hz

Physical
Dimensions (H x W x D) Shipping dimensions (H x W x D) Weight Shipping weight 4.37 x 43.00 x 23.62 cm (1.72 x 17.00 x 9.30 in) 11.43 x 60.02 x 35.56 cm (4.50 x 23.63 x 14.00 in) 3.65 kg (8.05 lb) 5.42 kg (11.95 lb)

Environmental
Maximum elevation (above MSL) Operating Storage Temperature Operating Storage Humidity Operating Storage 0 to 3000 m (0 to 10,000 ft) 0 to 15 000 m (0 to 50,000 ft) 5 to 45C (23 to 113F) 25 to 65C (13 to 149F) 0 to 95%, non-condensing 0 to 95%, non-condensing

Compliance
EMC approvals Safety approvals EN55022-Class A, FCC-Class A, VCCI, MIC, C-Tick, ICES-003 Class A, CE TUV, cTUVus, S-Mark (Argentina), GOST-R, CE

Customer support and warranty information is available at the APC Web site, www.apc.com. 2010 American Power Conversion. All rights reserved. All APC trademarks are property of American Power Conversion. Other trademarks are property of their respective owners.

990-3034D-001 12/2010

You might also like