Scribd
Upload
784 views

DeltaV Engineering Tutorial

This document provides instructions for opening an experiment in DeltaV Explorer, making configuration changes, and downloading them. It explains how to open the Explorer, access experiments under "AREA_A", view and change object parameters, connect objects by wiring them, save changes, and download the updated configuration to the control system.

Uploaded by

rom_c05464
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
784 views

DeltaV Engineering Tutorial

This document provides instructions for opening an experiment in DeltaV Explorer, making configuration changes, and downloading them. It explains how to open the Explorer, access experiments under "AREA_A", view and change object parameters, connect objects by wiring them, save changes, and download the updated configuration to the control system.

Uploaded by

rom_c05464
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 16

DeltaV Operation, Operate

This tutorial will demonstrate how to open an experiment, make configuration changes and download.

DeltaV Operation, Operate


Open the DeltaV Explorer Go to the Start > Engineering > DeltaV Explorer >

DeltaV Operation, Operate


The DeltaV Explorer is the main utility used to initiate changes to the control algorithms and physical hardware. In our case we will be using the Explorer to open each experiment with the Control Studio. Our experiments are under AREA_A Example: Open LAB1, Right click:

DeltaV configuration is Object Oriented,similar to Simulink. The toolbar on the left side is the pallet of control functions or objects Select the object of interest by left click The list in the lower right details all the parameters for each object. Example LI1-1 has a X_SCALE or field scale of 0 to 20 inH2O (68 DegF)

If you want to know what the object is, right click and select Whats this? You will the be able to gain access to the Help Files.

In this lab, we will be doing software wiring or connecting objects To wire, left click on the objects connection terminal and drag the wire to the other terminal

Wire Here

Once the change is made, we need to Download, but save first then Download

Save then Download

Select Download Now Next it will ask you if this is what you want to do for sure, Keep on saying Yes

Dunkin is now doing his thing and we are downloading, click OK here

Congratulations! You have finished Downloading!

You might also like