Control the Workplane

This tutorial outlines the procedures to understand and control the user coordinate system (UCS). You can realign and reorient the UCS to create and modify 3D objects on 2D workplanes and rotate objects in 3D. Audience: Users new to 3D modeling in AutoCAD 2010 Prerequisites: Working knowledge of 2D drafting Time to complete: 15 minutes

Objectives

Understand the use of coordinates in 3D Reorient the UCS to rotate objects Save, rename, restore, and delete a named UCS Work with the dynamic UCS

Tutorial Files
All necessary files for this tutorial are located at http://www.autodesk.com/autocad-tutorials.

Recommended: Before starting the tutorials 1 Download the control_workplane.zip from http://www.autodesk.com/autocad-tutorials/. 2 Unzip control_workplane.zip to C:\My Documents\Tutorials.

Before Starting This Tutorial

To switch to a 3D Modeling workspace 1 On the status bar, at the bottom of the drawing area, click the Workspace Switching button.

2 On the Workspace menu, click 3D Modeling.

The 3D Modeling workspace is displayed. The Workspaces icon in the status bar indicates that you are now in the 3D Modeling workspace. In this workspace, you can access the various commands and tools needed for creating 3D drawings. NOTE For more information about switching workspaces, see the AutoCAD Users Guide or refer to the AutoCAD 2009 tutorial: Switching Workspaces in AutoCAD 2009.

Lesson 1: Work with Coordinates

The coordinates of the world coordinate system(WCS) define the location of all objects and the standard views of AutoCAD drawings. However, WCS are permanent and invisible. It cannot be moved or rotated.

2 | Control the Workplane

AutoCAD provides a movable coordinate system called the user coordinate system(UCS). The XY plane of the UCS is called the workplane. In a drawing, by default WCS and UCS have the same orientation. When you create and modify objects in a 3D environment, you can move and reorient the UCS in 3D modeling view. Use the right-hand rule to determine the positive axis direction of the Z axis. By rotating your hand, see how the X, Y, and Z axes rotate as you change the UCS.

In this lesson, you will learn how to:

Align the workplane with the face of an object Create and modify objects on the workplane of the current UCS

File Name: 41 stand.dwg

Lesson 1: Work with Coordinates | 3

To align the workplane with the face of a 3D object

The left image shows the user coordinate system not aligned to the face plate of the 3D object and the right image shows the user coordinate system aligned to the face plate of the 3D object.

To construct objects on the face of the desk stand in the sample file, align the XY plane (workplane) of the UCS with the face of the desk stand.

1 Click

Open.

2 In the Select File dialog box, browse to C:\ My Documents\Tutorials and select 41 Stand.dwg. 3 Click Open. The UCS icon is displayed at the origin (0,0,0) of the current coordinate system.

4 | Control the Workplane

By convention, the X axis is red, the Y axis is green, and the Z axis is blue. The crosshairs uses the same colors to represent the directions of the axes.

4 On the left half of the status bar, click the Dynamic UCS button to turn it off.

5 On the ribbon, click View tab Coordinates panel 3-Point.

6 On the left half of the status bar, click Object Snap button to enable object snap mode. 7 Right-click the object snap button and click Endpoint to turn it on. The endpoint option should now have a box around its icon which indicates the object snap enabled

Lesson 1: Work with Coordinates | 5

8 At the prompt, specify the endpoint of the lower-left corner of the face plate as the new origin point.

9 At the prompt, specify the lower-right corner of the face plate.

6 | Control the Workplane

10 At the prompt, specify the endpoint of the upper-left corner of the face plate.

TIP You can use Zoom on the SteeringWheels tool to magnify the edges of the model that are in close proximity to each other. For more information on SteeringWheels, see the AutoCAD User's Guide or refer to the AutoCAD 2009 tutorial: Navigating a Model with Steering Wheels. The XY plane (workplane) of the UCS is now aligned to the face of the desk stand with the origin point (0,0,0) located in the bottom-left corner.

Lesson 1: Work with Coordinates | 7

To create and modify objects when the workplane is aligned to the face of a 3D object On the same drawing 41 Stand.dwg. do the following: 1 On the left half of the status bar, click Ortho to turn it on.

2 Right-click the Object Snap button and click Endpoint, Midpoint, Intersection, and Center to turn them on.

8 | Control the Workplane

The selected options should now have a box around its icon which indicates the object snap enabled. 3 On the ribbon, click Home tab Draw panel Line.

4 To specify first point, select the midpoint of the top edge of the face plate.

Lesson 1: Work with Coordinates | 9

5 At the prompt, enter @30<270 and press Enter. NOTE To change the color of the line to red, select the line, right-click and click Properties. In the Properties palette, under General, select Color and change it to red.

6 At the Command prompt, enter @35<180 and press Enter. This creates a 35 mm line that extends to the left at a 180-degree angle.

10 | Control the Workplane

7 Press Enter to end the command. 8 On the ribbon, click Home tab Draw panel Circle drop-down Center, Diameter.

Lesson 1: Work with Coordinates | 11

9 Select the intersection between the 30mm and the 35mm line as the center point for circle.

10 At the prompt, enter 20 as the diameter of circle and press Enter.

NOTE Coordinate values, such as those of the center of the circle, are measured from the new UCS origin. 11 On the ribbon, click Home tab Draw panel Rectangle.

12 | Control the Workplane

12 Select the center point of the circle as the first corner point.

13 At the prompt, enter @35,5 and press Enter.

Lesson 1: Work with Coordinates | 13

14 On the ribbon, click Home tab Modify panel Rotate.

15 Select The rectangle and press Enter. TIP If you cannot select the rectangle with the pickbox, enter L and press Enter to select the last object drawn.

14 | Control the Workplane

16 Click the endpoint of the lower-right corner of the rectangle.

17 At the prompt, enter -30 to specify the rotation angle and press Enter.

Lesson 1: Work with Coordinates | 15

NOTE The rectangle was rotated on the workplane - the axis of rotation is always perpendicular to the Z axis of the UCS. 18 On the ribbon, click Home tab Modify panel Mirror.

19 Select the rectangle and press Enter.

16 | Control the Workplane

20 Select the top endpoint of the 30mm line to specify the first point of the mirror line.

21 Select the bottom endpoint of the 30mm line to specify the second point of the mirror line.

Lesson 1: Work with Coordinates | 17

22 At the prompt, enter n (for No) and press Enter. A mirror image of the first rectangle is created and aligned to the face of the desk stand.

18 | Control the Workplane

NOTE Objects created and modified on the face of the desk stand are automatically aligned to the workplane of the current UCS.

Summary: In this lesson, you learned how to

Align the workplane of the UCS to the face of a 3D solid object Create and modify objects that are aligned to the face of the solid object you selected

Lesson 2: Reorient the UCS to Rotate Objects

There are several methods to manipulate the UCS in 3D. You can move and reorient the UCS to rotate objects. Point your right thumb in the positive direction of the UCS Z axis and curl your fingers. Your fingers indicate the positive rotation in a counter-clockwise direction.

File Name: 42 Toy House.dwg

Lesson 2: Reorient the UCS to Rotate Objects | 19

To align the Z axis of the UCS to rotate objects

The positive Z axis of the UCS is aligned perpendicular to the plane in which the object was originally created. The following steps explain how to align the Z axis of the UCS to rotate objects.

1 Click

Open.

2 In the Select File dialog box, browse to C:\ My Documents\Tutorials and select 42 Toy House.dwg. 3 Click Open. 4 On the ribbon, click View tab Coordinates panel Z-Axis Vector.

5 Click the endpoint on the top-left outside edge of the red door to specify the new origin point.

20 | Control the Workplane

6 Click the endpoint on the top-right outside edge of the red door to specify point on positive portion of Z axis.

The UCS origin is moved to the first specified point and its positive Z-axis passes through the second specified point.

7 On the ribbon, click Home tab Modify panel Rotate.

Lesson 2: Reorient the UCS to Rotate Objects | 21

8 Click the red door and press Enter.

9 Click the midpoint on the outside edge at the top of the red door to specify the base point.

10 At the prompt, enter -15 as the rotation angle and press Enter.

22 | Control the Workplane

You have aligned and rotated the Z axis of the UCS to open the door. Summary: In this lesson, you learned how to align the axis of the UCS to rotate objects

Lesson 3: Create an Object on the Face of a 3D Object with Dynamic UCS

To align objects on a 3D object, use the dynamic UCS feature to temporarily and automatically align the XY plane of the UCS with the face located under the crosshairs. After you finish the command, the UCS returns to its previous location and orientation. File Name: 42 Toy House.dwg To align the XY plane with the dynamic UCS feature

Lesson 3: Create an Object on the Face of a 3D Object with Dynamic UCS | 23

The following steps explain how to use dynamic UCS to draw a circle to the face of a 3D solid object.

1 Click

Open.

2 In the Select File dialog box, navigate to c:\My Documents\Tutorials and select 42 Toy House.dwg. 3 Click Open. 4 On the status bar, click the Dynamic UCS button to turn it on.

5 On the ribbon, click Home tab Draw panel Circle drop-down Center, Radius.

6 Move the crosshairs over the midpoint of the green door of the toy house to specify the center point of the circle. 7 At the prompt, enter .6 as the radius of circle and press Enter.

24 | Control the Workplane

NOTE The workplane aligns with each visible face as the crosshairs passes over it. 8 To create more circles as shown in the illustration, right-click the drawing and click Repeat Circle.

9 Specify points anywhere on each plane to create more circles as shown in the illustration.

NOTE that after you exit the circle command, the UCS returns to its previous location and orientation automatically.

Lesson 3: Create an Object on the Face of a 3D Object with Dynamic UCS | 25

Summary: In this lesson, you learned how to align the UCS with the face of a 3D object using Dynamic UCS. Congratulations! You have defined custom UCSs for use with 3D models. For more information, see the AutoCAD Users Guide.

26 | Control the Workplane