Scribd
Upload
540 views1 page

Simple Bass Treble Tone Control

The LM1036 is an integrated circuit that provides DC controlled bass, treble, volume, and balance tone control for stereo audio systems in cars, radios, and TVs. It has four control inputs that allow these functions to be adjusted through external potentiometers or a remote control system. The circuit uses a single capacitor to define each tone response and has features such as a wide voltage range, large volume control, tone control of +/- 15 dB, and high signal to noise ratio with few external components needed.

Uploaded by

sanapashok
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
540 views1 page

Simple Bass Treble Tone Control

The LM1036 is an integrated circuit that provides DC controlled bass, treble, volume, and balance tone control for stereo audio systems in cars, radios, and TVs. It has four control inputs that allow these functions to be adjusted through external potentiometers or a remote control system. The circuit uses a single capacitor to define each tone response and has features such as a wide voltage range, large volume control, tone control of +/- 15 dB, and high signal to noise ratio with few external components needed.

Uploaded by

sanapashok
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Simple Bass Treble Tone Control

The LM1036 is a DC controlled tone (bass/treble), volume and balance circuit for stereo applications in car radio, TV and audio systems. An additional control input allows loudness compensation to be simply effected. Four control inputs provide control of the bass, treble, balance and volume functions through application of DC voltages from a remote control system or, alternatively, from four potentiometers which may be biased from a zener regulated supply provided on the circuit. Circuit diagram:

Bass Treble Tone Control Circuit Diagram Each tone response is defined by a single capacitor chosen to give the desired characteristic. Features: Wide supply voltage range, 9V to 16V Large volume control range, 75 dB typical Tone control, 15 dB typical Channel separation, 75 dB typical Low distortion, 0.06% typical for an input level of 0.3 Vrms High signal to noise, 80 dB typical for an input level of 0.3 Vrms Few external components required Note: Vcc can be anything between 9V to 16V and the output capacitors are 10uF/25V electrolytic

You might also like