Scribd
Upload
234 views3 pages

Tejas-Ems Data Uploading Procedure: This Process Involves Two Steps

This document outlines a two-step process for uploading optical power measurement data from EMS servers to QMSnet: 1. Optical power measurements are taken from EMS servers in .csv format by running a script on the servers. 2. The generated .csv file is then uploaded into the QMSnet system by browsing for the file and clicking "Start Processing" on the upload page.

Uploaded by

rohit00722
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
234 views3 pages

Tejas-Ems Data Uploading Procedure: This Process Involves Two Steps

This document outlines a two-step process for uploading optical power measurement data from EMS servers to QMSnet: 1. Optical power measurements are taken from EMS servers in .csv format by running a script on the servers. 2. The generated .csv file is then uploaded into the QMSnet system by browsing for the file and clicking "Start Processing" on the upload page.

Uploaded by

rohit00722
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

TEJAS-EMS DATA UPLOADING PROCEDURE

This Process involves two steps


1. Taking Optical Power Measurement from EMS servers in .csv format 2. Uploading the .csv file into QMSnet

1.a)

Procedure for copying Optical Power Measurement script to EMS servers


Copy the file OPTICAL.tgz to root of EMS Server. Execute following command for unzipping the file: tar zxvf OPTICAL.tgz A directory optical is created after execution of above command, and required files are stored in the folder.

1.b)

Procedure for taking Bulk Optical Power Measurement in EMS


Go to optical directory cd optical Execute the command to get execute permission chmod 777 GenerateOpticalPowerReport.sh Run the script for taking optical power report .(s)GenerateOpticalPowerReport.sh(s) ems(s)10.116.*.*(s)Y Where (s) space give the IP address of the server

Note: 10.116.*.*

Wait till power report generation is completed (it will create file say, OpticalPowerReport_04_12_2009_10_50_30.csv and will be saved in the optical folder)

2.a)

Uploading the .csv file to QMSnet Login to QMS net Go to OPERATIONAL DATA

Click on Upload Tejas EMS data

Then click on browse and browse for the generated Optical report file(.csv file) Click Start Processing When the upload is complete, Upload complete! confirms the successful uploading of data.

------------------------------------------

You might also like