Tee Course Grade 10: Module 7 - PC Hardware Memory and Storage Devices
Tee Course Grade 10: Module 7 - PC Hardware Memory and Storage Devices
LEARNING OBJECTIVES
At the end of this lesson, students will be able to : 1. Meet the expectations of the Course Curriculum coded as:
TFV.01E, TF2.01E, TF2.02E, TF2.03E, TF2.04E, IC1.02E, SPV.01E; 2. Explain the function and interaction of the primary (RAM, ROM) and secondary storage devices (magnetic and optical); 3. Describe secondary storage devices: FDD, HD, CD-ROM, DVD; 4. Use precise terminology in relation to all storage devices; 5. Explain how data is stored on the surface of magnetic and optical disks; 6. Uninstall and re-install main and secondary storage devices: RAM, FDD, HD, CD-ROM; 7. Use safe practices in the handling of computer hardware and electronic components.
Short Review
Communication Devices
Principle: the closer the memory is to the CPU, the faster it is.
Memory addresses
Memory is a collection of cells, each with a unique physical/memory address Each cell can hold one byte or 8 bits
With one by we can represent one character in ASCII Code
Application/Thinking
How many bytes are in the phrase You are great! . a) 11 b) 13 c) 14 d) 1 So, this sentence will occupy __?__ cells in memory
Storage Capacity
Approximation
-----------------------210 bytes 220 bytes 230 bytes 240 bytes 250 bytes 260 bytes
-----------103 bytes 106 bytes 109 bytes 1012 bytes 1015 bytes 1018 bytes
Application/Thinking
How many megabytes (MB = 2 to the power of 20 bytes) are in a terabyte (1TB = 2 to the power of 40 bytes): a) 2 to the power of 10 b) 2 to the power of 20 c) 2 to the power of 40 d) 2 to the power of 80
The CPU accesses each location in memory by using a unique number, called a memory address.
SDRAM (Synchronous DRAM) EDRAM (Enhanced DRAM) EDO (Extended Data Out) FLASH RAM Ferroelectric RAM
Volatile Primary
(Semiconductor chip). Main Memory
PROM Non-volatile EPROM ROM EEPROM Tape Magnetic memory HD, Zip Disk Secondary FDD
(Devices)
Each particle's direction represents a 1 (on) or 0 (off), representing each bit of data that the CPU can recognize. A disk drive uses read/write heads containing electromagnets to create magnetic charges on the medium.
Formatted Disk
Magnetic Disks
A read/write head travels across a spinning magnetic disk, retrieving or recording data
When an optical drive shines light into a pit, the light cannot be reflected back. This represents a bit value of 0 (off). A land reflects light back to its source, representing a bit value of 1 (on).
lesson Review
List four types of magnetic and four types of optical storage devices. Identify two common uses for floppy disks. Explain how data is stored on the surface of magnetic and optical disks. List three variations on optical disk technology.
EVALUATION
1. Cache memory has the fastest speed: T 2. A TB has 1024 MB? T 3. EPROM is a volatile memory? T 4. SRAM needs to be refreshed? T 5. EEPROM use ultraviolet light to erase data?T 6. A land reflects light back to its source, representing a bit value of 1 (on). T 7. A pit, does not reflect the light back and this represents a bit value of 0 (off). T F F F F F F F
conted
SRAM ______________________________ DRAM ______________________________ SDRAM ______________________________ EDRAM ______________________________ PROM ______________________________ EPROM ______________________________ EEPROM ______________________________ CD-ROM ______________________________ HDD ______________________________ FDD ______________________________ DVD RW ______________________________ CD-RW ______________________________