PNUEMATIC ROCKDRILLS

DIAMOND DRILLS

REPLACEMENT PARTS

PARTS HEADQUARTERS INC.

PHQ250 Stoper
All internal parts in the PHQ250 Stopers are also used in PHQ250 Jacklegs, Sinkers and Quarry drills. High penetration, and strong torque. Convenient operating controls, with push button leg retraction and adjustable motorcycle control feed Positive lubrication with good front end blow. Larger mating faces between major cylinder components for longer life and less wear. Improved pusher leg is available with a stainless steel piston rod to prevent corrosion and pitting. Available with three inch stainless steel leg cylinder for increased push and penetration in hard ground. New style steel puller for collared steel available. Uses rock drill oil or grease.

PHQ250 Stoper
PHQs new 250 Drills have larger mating faces between major cylinder components for reduced air leakage and longer wearing life.

ISO 9001:2000

Certificate: 002485

www.partshq.com

Features
Large mating faces on components bodies for less wear and longer life Reduced weight for ease of handling.

PHQ250 Stoper

PHQ250 Stoper Specifications CYLINDER BORE 31/8 inches 79.4mm CYLINDER STROKE 27/8 inches 73.25mm AIR CONSUMPTION 175cfm @90psi 4.9cu m/m @620kPa BLOWS PER MINUTE 2250bpm @ 90psi 2250bpm @620kPa SHANK SIZE - Collared
7

/8 inch x 4 inch - 22mm x 108mm

DRILL LENGTH Retracted 61 inches 1550 mm Extended 91 inches 2311mm DRILL WEIGHT With Leg Standard Leg 2 inch 100lb 45.6kg Stainless steel Leg 3 inch 94lb 42.6kg PHQ250 Stoper configurations: SM SS AB C SR Integral steel muffler Standard exhaust Anvil Block Collared drill steel Steel Retainer

PHQ carries a full range of parts for PHQ250 drills in stock. All parts made in Canada to precise specifications using only the highest quality tool steel
2003 Parts HeadQuarters Inc. All Rights Reserved. Terms of use.

PHQ250SMCSR
Muffled stoper collared c/w steel retainer

www.partshq.com

PB004.09.2003