Shipper's Declaration
Shipper's Declaration
Shipper's Declaration
Note: This form is not applicable if the cargo to be loaded requires a declaration under the requirements of SOLAS 1974, Chapter VII/R4, MARPOL 73/78 Annex III/R4, and the IMDG Code Chapter 5.4 (Documentation). This form meets the requirements of SOLAS 1974, Chapter VI, Reg 2 (for general cargo, cargo in cargo units, cargo carried in solid bulk) and the IMSBC Code, section 4.2.
General Information
Shipper Consignee Name/means of transport Port/place of departure Port/place of destination Transport document number Carrier Instructions or other matters
Cargo Information
General description of the cargo (For solid bulk cargo type of material/particle size) Gross mass (kg/tonnes) General cargo: Cargo unit(s): Bulk cargo: Relevant special properties of the cargo (eg highly soluble in water. For solid bulk cargo, see Section 4 of the IMSBC Code)
Specification of bulk cargo (if applicable) Stowage factor: Angle of repose: Trimming procedures: If potential hazard - chemical properties*: *eg: Class, UN number or MHB Transportable moisture limit Moisture content at shipment
Group of the cargo Group A and B* Group A* Group B Group C * For cargoes which may liquefy (Group A and Group A and B cargoes) Additional certificate(s) (if required) Certificate of moisture content and transportable moisture limit Weathering certificate
EHS/HME (see Chapters 2.10 and 2.9.3 of the IMDG Code and MARPOL Annex V) Cargo residues must be disposed of in accordance with MARPOL Annex V EHS/Marine Pollutant Human Health Criteria Met Rubber/Plastic Yes Yes Yes No No No Not available
Note: Human Health Criteria data may not be available only until 31 December 2014. From 1 January 2015 Human Health Criteria data must be available.
Declaration
I hereby declare that the consignment is fully and accurately described and that the given test results and other specifications are correct to the best of my knowledge and belief and can be considered as representative for the cargo to be loaded. Name/status, company/organisation of signatory Place and date Signature on behalf of shipper
Shippers' may deliver this declaration by fax or other electronic means. In any electronic transmission, where the signature of the declarant cannot be transmitted, full name of the declarant in capital letters must be provided on the form.
AMSA 268 (10/12)