AZEOTROPIC DISTILLATION AND RESIDUE CURVE MAPS
Exploiting L-L Boundaries in Azeotropic Separations e.g. Separation of water / n-butanol mixtures
Feed LL Boundary Pure Water Azeotrope Composition n-butanol n-butanol rich phase LL Equilibrium LL Boundary Pure butanol
Feed Water / n-butanol
Decanter
Water rich phase
2
Step I: Use the Decanter to Get Around the Azeotrope
Feed
Decanter LL Boundary Pure Water Feed A LL Boundary Feed B Composition n-butanol Azeotrope Sequence 1
3
Pure butanol
Step II: Distill the Two Phases (Each Phase in a Column)
Feed A LL Boundary Column 1 Pure Water
Feed B LL Boundary
Column 2
Azeotrope
Sequence 1
Composition n-butanol
Pure butanol
Step III: Mix the Two Azeotropic Streams with the Original Feed and Recycle to Decanter
Feed
Decanter LL Boundary Pure Water LL Boundary Composition Azeotrope n-butanol
Sequence 1
5
Pure butanol
SEQUENCE I Azeotrope Azeotrope Feed B Feed Column 2
Decanter n-butanol Column 1 Water
6
Azeotrope Feed A
AN ALTERNATIVE SEQUENCE: START WITH DISTILLATION
Feed
Column 1 Pure Water LL Boundary LL Boundary Pure Composition butanol Azeotrope n-butanol
Sequence 2
7
Step II: Feed Azeotrope to Decanter
Decanter Pure Water LL Boundary Feed A LL Boundary Pure butanol
Feed B Composition Azeotrope n-butanol
Sequence 2
Step III: Take First Liquid Phase to Column I and Second Liquid Phase to Column II
Feed A
Feed B
LL Boundary LL Boundary Column 1 Column 2 Pure Composition Pure Azeotrope Water n-butanol butanol
Sequence 2
9
SEQUENCE II
Azeotrope Feed B Azeotrope Feed
Decanter
Column 2
n-butanol
Column 1
Water
Feed A
10
SIMPLE GRAPHICAL TOOLS TO DEVELOP AZEOTROPIC SEQUENCES FOR TERNARY SYSTEMS
11
Distillation Curves
TAKE A COLUMN WITH TOTAL REFLUX
From Material Balance:
Lk = V k+1 x i,k = y i,k+1
From Equilibrium
k-1
y i,k in eqm with x i,k Take a value for x i,k get corresponding y i,k from Bubble Point Calculations
k Lk x i,k
Vk y i,k V k+1 y i,k+1
12
How to construct Distillation Curves ?
Bubble Point Calculation Gives us vapor composition in equilibrium with known liquid composition Can march up the column by doing a series of bubble point calculations
Dew Point Calculation Gives us liquid composition in equilibrium with known vapor composition Can march down the column by doing a series of dew point calculations
13
Distillation Curve
Species B
Region 1
Region 2
Species A
Azeotrope
Species C
Curves move in the direction of increasing temperature i.e., towards the least volatile species present in the mixture
14
Make sure your Setup, Components, and Properties specifications are complete. From the Tools menu, point to Analysis, then Property, then Residue. On the Residue Curves dialog box, Aspen Plus fills in defaults for all the required information. You can accept the defaults, or make changes to any of the following information: Components: Three are required. Use the Component 1, Component 2, and Component 3 lists to choose the three components you wish to study. Only conventional components that are not solids or ions are allowed. Defaults are the first three conventional components listed on the Components Specifications Selection sheet. Pressure: The default is 1 atm Valid Phases: You can specify rigorous two phase (Vapor-Liquid) or three phase (Vapor-Liquid-Liquid) calculations. The default is Vapor-Liquid. When finished, click Go to generate the residue curves, or first click the Save As Form button to save your interactive Property Analysis to forms within the Data Browser.
Saving an interactive Property Analysis as forms enables you to preserve the input and results of this Property Analysis to view or modify 15 at a later time. Aspen Plus displays the results in tabular form, in a form window and as a triangular plot.
How to Generate Distillation/Residue Curves on ASPEN
16
17
18
Rules: 1. Cannot (typically) cross distillation boundary 2. Within the same column, feed, top and bottom lie on a straight line Species B (lever arm principle)
Region 1
Region 2
Distillation Boundary Separatrix
Species A
Azeotrope
Species C
19
Lever-Arm Principle
D, y F, z
Column 1 Species B
B, x
Arm for D
B, x
F=B+D Fz = Bx + Dy = (F-D)x + Dy ==> D/F = (z -x)/(y-x)
F, z
Arm for B
D, y
Species A Species C
D/F = Arm for D/Total Arm
20
10
Lever Arm
Species B
Say, D / F = 0.0 => D = 0 and B = F
B, x F, z
Species A
Species C
21
Distillation Sequencing
Species B
Say, D / F = 0.10 => Distance from F to B is 10% that from D to B
B, x
F, z
Species A
D, y
Species C
Lever Arm helps us determine bottoms and distillate locations on composition diagram
22
11
Distillation Sequencing
Species B
So, ideally, as D/F increases we expect to finally reach a state where distillate is pure A and bottoms is a mixture of pure B and C.But, this is not what really happens !!!!
F, z
B, x
Species A
D, y
Species C
23
Remember Rule #I: Cant Cross the Distillation Boundary Species B
We have a distillation boundary which divides composition space into regions 1 and 2. If our feed is in Region 1, it is not possible to cross the boundary ( except in some very special cases) Distillation Boundary
B, x F, z
Region 1 Species A
Region 2 Species C
D, y
So, LOCATION OF FEED plays a very crucial role in design
24
12
EXAMPLE: ACETONE, CHLOROFORM, BENZENE Benzene SYSTEM 80.1 o C
Consider the given feed
Distillation Boundary
F, z
Region 1
Region 2
Acetone D, y 56.5 o C
Azeotrope
34 mol% acetone 64.4 oC
Chloroform 61.2 o C
25
Case I: Need pure Acetone and Pure Benzene Benzene
80.1 o C
Distillation Boundary
Column I
F, z
Acetone 56.5 o C
Column II
Azeotrope
34 mol% acetone 64.4 oC
Chloroform 61.2 o C
26
13
Case I: Need pure Acetone and Pure Benzene Benzene
80.1 o C
Column I
F, z
Distillation Boundary
Acetone 56.5 o C
Chloroform Azeotrope Column II 34 mol% acetone o
64.4 oC
61.2 C
Acetone + Chloroform
Acetone
II
Azeotrope
27
I
Benzene
USE NON-VLE METHOD TO SEPARATE THE AZEOTROPE (e.g., decanter for LL Boundaries, membrane, etc.)
Acetone + Chloroform
Acetone
II
Azeotrope
Decanter To another column or to recycle
I
Benzene
28
14
Case II: Need pure Benzene and Pure Chloroform Benzene
80.1 o C
Distillation Boundary
Column I
F, z
Acetone 56.5 o C
Column II
Azeotrope
34 mol% acetone 64.4 oC
Chloroform 61.2 o C
29
Case II: Need pure Benzene and Pure Chloroform Benzene
80.1 o C
Distillation Boundary
Column I
F, z
Decanter
Acetone 56.5 o C
Column II
Azeotrope
34 mol% acetone 64.4 oC
Chloroform 61.2 o C
30
15
Case II: Need pure Benzene and Pure Chloroform Benzene
80.1 o C
Distillation Boundary
Column I
F, z
Decanter
Column III
Acetone 56.5 o C
Column II
Azeotrope
34 mol% acetone 64.4 oC
Chloroform 61.2 o C
31
16
