Scribd
Upload
269 views1 page

Equipos para Procesos Intercambiadores de Calor 1: Heat Exchanger Specification Sheet

Uploaded by

Alejandro Echevarria

This document contains specifications for a heat exchanger including its size, fluids, temperatures, pressures, materials, construction details, and performance metrics. Key details include the connected surfaces of 1 m2, shellside fluid of water at 30°C inlet and 20°C outlet, tubeside fluid of ethylene at -5°C inlet and 10°C outlet, and a calculated heat transfer rate of 50 kcal/h. The unit has a carbon steel shell and tube bundle with a floating head and supports.

Copyright:

Attribution Non-Commercial (BY-NC)
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

Equipos para Procesos Intercambiadores de Calor 1: Heat Exchanger Specification Sheet

Uploaded by

Alejandro Echevarria
269 views1 page
This document contains specifications for a heat exchanger including its size, fluids, temperatures, pressures, materials, construction details, and performance metrics. Key details include the connected surfaces of 1 m2, shellside fluid of water at 30°C inlet and 20°C outlet, tubeside fluid of ethylene at -5°C inlet and 10°C outlet, and a calculated heat transfer rate of 50 kcal/h. The unit has a carbon steel shell and tube bundle with a floating head and supports.

Original Title

6078_6334AP_02

Copyright

© Attribution Non-Commercial (BY-NC)

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

This document contains specifications for a heat exchanger including its size, fluids, temperatures, pressures, materials, construction details, and performance metrics. Key details include the connected surfaces of 1 m2, shellside fluid of water at 30°C inlet and 20°C outlet, tubeside fluid of ethylene at -5°C inlet and 10°C outlet, and a calculated heat transfer rate of 50 kcal/h. The unit has a carbon steel shell and tube bundle with a floating head and supports.

Copyright:

Attribution Non-Commercial (BY-NC)
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
269 views1 page

Equipos para Procesos Intercambiadores de Calor 1: Heat Exchanger Specification Sheet

Uploaded by

Alejandro Echevarria
This document contains specifications for a heat exchanger including its size, fluids, temperatures, pressures, materials, construction details, and performance metrics. Key details include the connected surfaces of 1 m2, shellside fluid of water at 30°C inlet and 20°C outlet, tubeside fluid of ethylene at -5°C inlet and 10°C outlet, and a calculated heat transfer rate of 50 kcal/h. The unit has a carbon steel shell and tube bundle with a floating head and supports.

Copyright:

Attribution Non-Commercial (BY-NC)
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 1

Equipos para Procesos

Intercambiadores de Calor 1

Heat Exchanger Specification Sheet 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 Company: Location: Service of Unit: Item No.: Date: Size Surf/unit(eff.) Fluid allocation Fluid name Fluid quantity, Total Vapor (In/Out) Liquid Noncondensable Temperature (In/Out) Dew / Bubble point Density Viscosity Molecular wt, Vap Molecular wt, NC Specific heat Thermal conductivity Latent heat Pressure Velocity Pressure drop, allow./calc. Fouling resist. (min) Heat exchanged Transfer rate, Service

Enfriador Rev No.: /

Our Reference: Your Reference: Job No.: mm m2 Type hor Shells/unit PERFORMANCE OF ONE UNIT Connected in Surf/shell (eff.) Shell Side kg/h kg/h kg/h kg/s C C kg/m3 cp parallel serie s m2

Tube Side

kcal/(kg*C) kcal/(h*m*C) kcal/kg kgf/cm2 m/s kgf/cm2 m2*h*C/kcal kcal/h Dirty CONSTRUCTION OF ONE SHELL Shell Side kgf/cm2 / Code C mm / 150 ANSI / 150 ANSI / 150 ANSI Tks-avg Material ID CS CS OD mm

MTD corrected Clean Sketch Tube Side / Code

Design/Test pressure Design temperature Number passes per shell Corrosion allowance Connections In Size/rating Out mm Intermediate Tube No. Tube type Shell CS Channel or bonnet Tubesheet-stationary Floating head cover Baffle-crossing CS Baffle-long Supports-tube Bypass seal Expansion joint RhoV2-Inlet nozzle Gaskets - Shell side Floating head

OD

mm

Type single seg Seal type U-bend

Cut(%d)

Tube-tubesheet joint Type Bundle entrance Tube Side

/ 150 ANSI / 150 ANSI / 150 ANSI Length mm Pitch mm CS Tube pattern Shell cover Channel cover Tubesheet-floating Impingement protection None hor Spacing: c/c mm Inlet mm Type groove/expand kg/(m *s2)

Bundle exit

You might also like