Scribd Logo
Upload

Welcome to Scribd!

  • 175 views

    Belt Tear Switch

    Uploaded by

    mehdi227
    The document provides information on a belt tear switch product called SW4321E22P from Jayashree Electrodevices Pvt. Ltd. It includes a certificate number, schematic diagram, description of the construction which consists of monitoring units, sensor ropes, rope clamps and hooks. The monitoring units have an IP65 enclosure, manual reset contact, and 2 NO + 2 NC contacts. It describes how the units should be installed and mounted, and how the switch operates to provide a warning or tripping command when the belt tears and splinters activate the sensing rope.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Belt Tear Switch

    Uploaded by

    mehdi227
    175 views1 page
    The document provides information on a belt tear switch product called SW4321E22P from Jayashree Electrodevices Pvt. Ltd. It includes a certificate number, schematic diagram, description of the construction which consists of monitoring units, sensor ropes, rope clamps and hooks. The monitoring units have an IP65 enclosure, manual reset contact, and 2 NO + 2 NC contacts. It describes how the units should be installed and mounted, and how the switch operates to provide a warning or tripping command when the belt tears and splinters activate the sensing rope.

    Original Description:

    Belt Tear Switch

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides information on a belt tear switch product called SW4321E22P from Jayashree Electrodevices Pvt. Ltd. It includes a certificate number, schematic diagram, description of the construction which consists of monitoring units, sensor ropes, rope clamps and hooks. The monitoring units have an IP65 enclosure, manual reset contact, and 2 NO + 2 NC contacts. It describes how the units should be installed and mounted, and how the switch operates to provide a warning or tripping command when the belt tears and splinters activate the sensing rope.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    175 views1 page

    Belt Tear Switch

    Uploaded by

    mehdi227
    The document provides information on a belt tear switch product called SW4321E22P from Jayashree Electrodevices Pvt. Ltd. It includes a certificate number, schematic diagram, description of the construction which consists of monitoring units, sensor ropes, rope clamps and hooks. The monitoring units have an IP65 enclosure, manual reset contact, and 2 NO + 2 NC contacts. It describes how the units should be installed and mounted, and how the switch operates to provide a warning or tripping command when the belt tears and splinters activate the sensing rope.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    CERT

    EN ISO 9001 : 2000 Certificate : 04 100 9600 155 - E3

    BELT TEAR SWITCH

    SW4321E22P

    Left Hand Side Monitoring Unit-LH

    Right Hand Side Monitoring Unit-RH

    Schematic Connection Diagram

    Other Conveyor Safety Products


    Pull Cord Switch Belt Sway Switch

    In our search for excellence there is no finishing line. We are committed to all round development with focus on
    Quality Reliability Integrity

    To Detect Torn Belt Condition & Provide Tripping / Warning Command


    CONSTRUCTION
    A set consists of a) Pair of monitoring units with mounting frame. b) Pair of sensor ropes-each 5mtrs. long. c) Rope clamps - 08 Nos. d) Hooks 02 Nos.

    MONITORING UNITS
    Enclosure : Cast Aluminium Degree of Protection: IP65 Actuation : By splinters of the torn belt. Reset : Manual Contact Arrangement : 2 NO + 2 NC Contact Rating : 10 Amp. Res. @110/240 V AC 50 Hz

    Zero Speed Switch

    Heavy Duty Limit Switch

    OPERATION / ACTUATION
    Toggle Limit Switch Rotary Cam Limit Switch

    JAYASHREE ELECTRODEVICES PVT.LTD.

    Regd. Office : 101, Prabodhan Apartment, 64/9 Erandwane, Pune - 411 004. India Tel : +91 20 2543 7736. Fax : +91 20 2543 7253. E-mail :[email protected]

    Works : W1, F-2 Block, M.I.D.C. Pimpri, Pune - 411 018. India. Tel : +91 20 27472873, 30681323 Fax : +91 20 30681326 E-mail : [email protected]

    AKASH GRAPHIC 2544 8775

    JAYASHREE ELECTRODEVICES PVT. LTD.

    Web : www.jayashree-electrodevices.com

    The Monitoring units are to be fixed in inclined position in the direction of the belt movement as shown. The unit is provided with two 5 metre long rope lengths. Appropriate length to be cut while fixing the rope in positions as shown. The splinters, resulting from tearing of the belt, will push out the cross connected sensing rope to actuate the switch. The potential free contacts of the switch are to be wired into appropriate warning / tripping circuit. The switch can be reset by operating the reset lever. Rope to be manually refixed in position while re-starting the belt operation.

    Location of Monitoring Units

    03/2010/1000

    You might also like