Scribd
Upload
115 views6 pages

Zync Z919 OS Installation Guide

The document provides installation instructions for the Zync Z919 tablet operating system. It outlines steps to download and extract the installation files, connect the tablet to a PC, hold the reset button while pressing power and menu to open the installer, select the flash tool option to begin installation, and restart the tablet once complete. Upon restart, the new operating system will be installed and the tablet ready for use within 5-6 minutes.

Uploaded by

ShashankDwivedi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
115 views6 pages

Zync Z919 OS Installation Guide

The document provides installation instructions for the Zync Z919 tablet operating system. It outlines steps to download and extract the installation files, connect the tablet to a PC, hold the reset button while pressing power and menu to open the installer, select the flash tool option to begin installation, and restart the tablet once complete. Upon restart, the new operating system will be installed and the tablet ready for use within 5-6 minutes.

Uploaded by

ShashankDwivedi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Zync Z919 OS Installation Guide

Before starting the installation Download the file required. Fully charge the Tablet. Turn off the Tablet. Connect the Tablet to your PC using the USB data cable.

Steps to install the Tablet OS Extract the downloaded Zip file, Zync-Z919-OS-ICS (If required, refer How to Extract a Zip File - Guide). The folders 'logo_DIY' and 'SDPackTool' will be extracted.

Open the 'SDPackTool' folder.

Run Vortexflash.exe file.

Press & hold the Reset button of the Tablet for 5 to 6 seconds. Now press the Tablet Power & Menu buttons both together tp open up the following window on the PC screen.

Minimize the AutoPlay window to view the Installer.

Now select the first option in the installation setup as highlighted in the following screenshot, 'Flash Tool V1.'4'

Please select the particular option on the right as marked in the following screenshot.

A new window will open up, please click on the 'OK' button.

Installing

After completion, the following window opens up, click the 'OK' button to end the process.

Press the Reset button on the Tablet & then turn on the Tablet using the Power button. The installation is completed & the Tablet is now ready to use. The Tab may take 5 to 6 minutes to start up.

You might also like