Scribd
Upload
77 views4 pages

Special Operating Instructions

This document provides special operating instructions for the LS2208-SR20291R scanner. It allows for additional programming capabilities and barcode symbologies compared to standard models. New features include support for longer Code 128 barcodes, additional custom codes for Code 93, and new barcode commands to enable or disable specific symbologies individually or in groups. A new parameter also allows the Intellistand mode to be enabled or disabled when the scanner is placed in a scan stand. Service contact information is provided at the end.

Uploaded by

Agaeiouawe
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views4 pages

Special Operating Instructions

This document provides special operating instructions for the LS2208-SR20291R scanner. It allows for additional programming capabilities and barcode symbologies compared to standard models. New features include support for longer Code 128 barcodes, additional custom codes for Code 93, and new barcode commands to enable or disable specific symbologies individually or in groups. A new parameter also allows the Intellistand mode to be enabled or disabled when the scanner is placed in a scan stand. Service contact information is provided at the end.

Uploaded by

Agaeiouawe
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

LS2208-SR20291R

SPECIAL OPERATING INSTRUCTIONS

LS2208-SR20291R

The LS 2208-SR20291R differs from the standard in the following ways:

Allows programmability via the host computers RS232 interface and bar code menu equivalent to the LS4004-E075. (Refer to the LS4004-E075 Special Operating Instructions, p/n 73-16171-075.) The new extended length range of Code 128 is 1 - 32. (The standard length range of Code 128 is 6 - 32.) Custom code ID g was added to Code 93. The scanner accepts new commands and performs the actions specified in the table below. Command
DC

Action Code 39 enabled for any length Code 93 enabled for any length Code 128 enabled for any length Codabar enabled for any length

All other symbologies are disabled. DD


Set DCA mode 2 Interleaved 2 of 5 enabled + transmit check digit Minimum length of 6 maximum length of 40

All other symbologies are disabled.

Special Operating Instructions

A new parameter allows Intellistand mode to be enabled and disabled when the scanner is placed in a scan stand. The default is disable Intellistand. Scan a bar code below to enable and disable Intellistand mode.

Disable Intellistand Mode (Default)

Enable Intellistand Mode

Service Information
Before you use the unit, it must be configured to operate in your facilitys network and run your applications. If you have a problem running your unit or using your equipment, contact your facilitys Technical or Systems Support. If there is a problem with the equipment, they will contact the Symbol Global Customer Interaction Center. Locate Symbol Global Customer Interaction Centers by visiting: www.symbol.com/contactsupport. For the latest version of this guide go to: http://www.symbol.com/manuals.

73E-58808-291R Revision A - December 2006 Symbol Technologies, Inc. One Symbol Plaza Holtsville, N.Y. 11742-1300 http://www.symbol.com

You might also like