Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    Oil Separator For Boring - EMP

    Uploaded by

    AMTRIS
    The document describes the multi-tank sludge-oil separator process where contaminated water enters the first tank, sludge sinks to the bottom and oil rises to the surface; the water then enters a second tank where more oil separates and rises to be removed, after which the water can be reused with only a small amount requiring further treatment.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Oil Separator For Boring - EMP

    Uploaded by

    AMTRIS
    12 views2 pages
    The document describes the multi-tank sludge-oil separator process where contaminated water enters the first tank, sludge sinks to the bottom and oil rises to the surface; the water then enters a second tank where more oil separates and rises to be removed, after which the water can be reused with only a small amount requiring further treatment.

    Original Description:

    oil separator

    Original Title

    Oil Separator for Boring - EMP

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the multi-tank sludge-oil separator process where contaminated water enters the first tank, sludge sinks to the bottom and oil rises to the surface; the water then enters a second tank where more oil separates and rises to be removed, after which the water can be reused with only a small amount requiring further treatment.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    12 views2 pages

    Oil Separator For Boring - EMP

    Uploaded by

    AMTRIS
    The document describes the multi-tank sludge-oil separator process where contaminated water enters the first tank, sludge sinks to the bottom and oil rises to the surface; the water then enters a second tank where more oil separates and rises to be removed, after which the water can be reused with only a small amount requiring further treatment.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Inside the Sludge oil Separator the following steps will take place: The water contaminated with

    h oil and sludge enters the tank 1 . Due to the special construction in the compartment tank system, the water will evenly be distributed through the tank. The sludge sinks to the bottom of the tank. When the water enters the outlet of the first tank, the sludge has been removed .Inside the second tank, the oil is separated from the water. The contaminated water enters the separator in tank 2 . The oil drops will rise to the water surface due to their low density and the oilcan be taken manually. they will eventually rise to the surface. From the tank 2 there is return pipe connecting to the pump and the water can reused to put into borehole. For Soil investigate only a few water uses to this process. Waste Water Facility Sludge Oil Separator Drawing No MMI-001-WWT Sheet No 1 of 1

    Draw AM Sheet Size A4

    Date 14 March 2013 Scale No scale

    You might also like