Scribd
Upload
420 views2 pages

Ka 2411

The document summarizes the technical specifications of the K2411 integrated circuit, which is designed for use as a telephone tone ringer. It can generate two adjustable tone frequencies and includes features to prevent false triggering from dial pulses. The document provides details on the chip packaging, maximum ratings, typical electrical characteristics including operating voltages and frequencies, and notes on initialization and sustaining voltages.

Uploaded by

Luis Alfonso Parra Letterni
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
420 views2 pages

Ka 2411

The document summarizes the technical specifications of the K2411 integrated circuit, which is designed for use as a telephone tone ringer. It can generate two adjustable tone frequencies and includes features to prevent false triggering from dial pulses. The document provides details on the chip packaging, maximum ratings, typical electrical characteristics including operating voltages and frequencies, and notes on initialization and sustaining voltages.

Uploaded by

Luis Alfonso Parra Letterni
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

FORWARD INTERNATIONAL ELECTRONICS LTD.

SEMICONDUCTOR TECHNICAL DATA

K2411
TELEPHONE TONE RINGER

The 2411 is a bipolar integrated circuit designed for telephone tone ringer. Features * Designed for telephone bell replacement * Adjustable 2-tone frequency * Hysteresis circuit prevents false triggering and rotary dial Chirps * Adjustable for reduced supply initiation current Package: DIP-8 Pin No 1 2 3 4 5 6 7 8 Name VCC RSL LFI LFO GND HFO HFI OUT Function Power supply (+) Resistor select Low freq osc input Low freq osc output Ground (-) High freq osc output High freq osc input Signal output

1 2 3 4

8 7 6 5

ABSOLUTE MAXIMUM RATING


Parameter DC Supply Voltage Power Dissipation Operating Temperature Storage Temperature
Symbol Vcc Pd Topr Tstg Rating 36 450 -25~+75 -55~+125 Unit V mW

ELECTRICAL CHARACTERISTICS VCC=24V,Ta=25 (Unless otherwise specified)


Parameter Symbol Test Conditions Min Typ Max Unit Operating Supply Voltage Vcc 36 V Initiation Supply Voltage (note 1) Vsi 17 19 21 V Initiation Supply Current Isi Vcc=Vsi,No Load,Rsl=6.8k 1.4 3.5 4.2 mA Sustaining Voltage (note 2) Vsus 9.7 11 13 V Vcc=Vsus,No Load Sustaining Current Isus 0.2 1.4 2.5 mA Output High Voltage VOH Vcc=21V,IOH=15mA 17 19 21 V Output Low Voltage VOL Vcc=21V,IOL=15mA 1.6 V High Frequency 1 FH1 R3=191K, C3=6800pF 461 512 563 Hz High Frequency 2 R3=191K, C3=6800pF FH2 576 640 703 Hz Low Frequency R2=165K, C2=0.47uF FL 9 10 11 Hz Note: 1.initiation supply voltage (Vsi) is the supply voltage repuired to start the tone ringer oscillating. 2.sustaining voltage (Vsus) is the supply voltage repuired to maintain oscillation.

t a d

h s a

t e e

. u 4

m o c

www.DataSheet4U.com

2411

You might also like