Data Sheet
Data Sheet
Data Sheet
MPS2222 MPS2222A*
*Motorola Preferred Device
MAXIMUM RATINGS
Rating Collector Emitter Voltage Collector Base Voltage Emitter Base Voltage Collector Current Continuous Total Device Dissipation @ TA = 25C Derate above 25C Total Device Dissipation @ TC = 25C Derate above 25C Operating and Storage Junction Temperature Range Symbol VCEO VCBO VEBO IC PD PD TJ, Tstg MPS2222 30 60 5.0 600 625 5.0 1.5 12 55 to +150 MPS2222A 40 75 6.0 Unit Vdc Vdc Vdc mAdc mW mW/C Watts mW/C C CASE 2904, STYLE 1 TO92 (TO226AA)
1 2 3
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Case Symbol RqJA RqJC Max 200 83.3 Unit C/W C/W
OFF CHARACTERISTICS
Collector Emitter Breakdown Voltage (IC = 10 mAdc, IB = 0) Collector Base Breakdown Voltage (IC = 10 mAdc, IE = 0) Emitter Base Breakdown Voltage (IE = 10 mAdc, IC = 0) Collector Cutoff Current (VCE = 60 Vdc, VEB(off) = 3.0 Vdc) Collector Cutoff Current (VCB = 50 Vdc, IE = 0) (VCB = 60 Vdc, IE = 0) (VCB = 50 Vdc, IE = 0, TA = 125C) (VCB = 50 Vdc, IE = 0, TA = 125C) Emitter Cutoff Current (VEB = 3.0 Vdc, IC = 0) Base Cutoff Current (VCE = 60 Vdc, VEB(off) = 3.0 Vdc) MPS2222 MPS2222A MPS2222 MPS2222A MPS2222 MPS2222A MPS2222A ICBO MPS2222 MPS2222A MPS2222 MPS2222A IEBO MPS2222A IBL MPS2222A 20 nAdc 0.01 0.01 10 10 100 nAdc Adc V(BR)CEO V(BR)CBO V(BR)EBO ICEX 30 40 60 75 5.0 6.0 10 Vdc Vdc Vdc nAdc
Preferred devices are Motorola recommended choices for future use and best overall value.
Motorola SmallSignal Transistors, FETs and Diodes Device Data Motorola, Inc. 1996
MPS2222 MPS2222A
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) (Continued)
Characteristic Symbol Min Max Unit
ON CHARACTERISTICS
DC Current Gain (IC = 0.1 mAdc, VCE = 10 Vdc) (IC = 1.0 mAdc, VCE = 10 Vdc) (IC = 10 mAdc, VCE = 10 Vdc) (IC = 10 mAdc, VCE = 10 Vdc, TA = 55C) (IC = 150 mAdc, VCE = 10 Vdc)(1) (IC = 150 mAdc, VCE = 1.0 Vdc)(1) (IC = 500 mAdc, VCE = 10 Vdc)(1) Collector Emitter Saturation Voltage(1) (IC = 150 mAdc, IB = 15 mAdc) hFE 35 50 75 35 100 50 30 40 VCE(sat) MPS2222 MPS2222A MPS2222 MPS2222A VBE(sat) MPS2222 MPS2222A MPS2222 MPS2222A 0.6 1.3 1.2 2.6 2.0 0.4 0.3 1.6 1.0 Vdc 300 Vdc
MPS2222A only
MPS2222 MPS2222A
(IC = 500 mAdc, IB = 50 mAdc) Base Emitter Saturation Voltage(1) (IC = 150 mAdc, IB = 15 mAdc)
mmhos
SWITCHING CHARACTERISTICS
Delay Time Rise Time Storage Time Fall Time
MPS2222A only
td tr ts tf 10 25 225 60 ns ns ns ns
(VCC = 30 Vdc, VBE(off) = 0.5 Vdc, IC = 150 mAdc, IB1 = 15 mAdc) (Figure 1) (VCC = 30 Vdc, IC = 150 mAdc, IB1 = IB2 = 15 mAdc) (Figure 2)
1. Pulse Test: Pulse Width 300 ms, Duty Cycle 2.0%. 2. fT is defined as the frequency at which |hfe| extrapolates to unity.
MPS2222 MPS2222A
SWITCHING TIME EQUIVALENT TEST CIRCUITS
+ 30 V +16 V 0 2 V 1.0 to 100 s, DUTY CYCLE 2.0% 1 k < 2 ns 200 +16 V 0 CS* < 10 pF 14 V < 20 ns 1k 1N914 CS* < 10 pF 1.0 to 100 s, DUTY CYCLE 2.0% + 30 V 200
4 V Scope rise time < 4 ns *Total shunt capacitance of test jig, connectors, and oscilloscope.
TJ = 125C
25C 100 70 50 30 20 10 0.1 55C VCE = 1.0 V VCE = 10 V 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 200 300 500 700 1.0 k
0.6
IC = 1.0 mA
10 mA
150 mA
500 mA
0.4
0.2
0 0.005
0.01
0.02 0.03
0.05
0.1
0.2
2.0
3.0
5.0
10
20
30
50
MPS2222 MPS2222A
200 100 70 50 t, TIME (ns) 30 20 10 7.0 5.0 3.0 2.0 5.0 7.0 10 200 300 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) 500 IC/IB = 10 TJ = 25C tr @ VCC = 30 V td @ VEB(off) = 2.0 V td @ VEB(off) = 0 500 300 200 100 70 50 30 20 10 7.0 5.0 5.0 7.0 10 20 30 50 70 100 200 IC, COLLECTOR CURRENT (mA) 300 500 ts = ts 1/8 tf VCC = 30 V IC/IB = 10 IB1 = IB2 TJ = 25C
t, TIME (ns)
tf
10 8.0 NF, NOISE FIGURE (dB) IC = 1.0 mA, RS = 150 500 A, RS = 200 100 A, RS = 2.0 k 50 A, RS = 4.0 k RS = OPTIMUM RS = SOURCE RS = RESISTANCE
10 f = 1.0 kHz 8.0 NF, NOISE FIGURE (dB) IC = 50 A 100 A 500 A 1.0 mA
6.0
6.0
4.0
4.0
2.0
2.0
5.0 10
20
50 100
0 50
100 200
5.0 k 10 k 20 k
50 k 100 k
f, FREQUENCY (kHz)
300 200
100 70 50 1.0
0.2 0.3
0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 REVERSE VOLTAGE (VOLTS)
20 30
50
2.0
50
70 100
Figure 9. Capacitances
MPS2222 MPS2222A
1.0 TJ = 25C 0.8 VBE(sat) @ IC/IB = 10 0.6 VBE(on) @ VCE = 10 V 0.4 1.0 V COEFFICIENT (mV/ C) V, VOLTAGE (VOLTS) 0 0.5 1.0 1.5 2.0 VCE(sat) @ IC/IB = 10 0 2.5 0.1 0.2 50 100 200 0.5 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA) 500 1.0 k 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 IC, COLLECTOR CURRENT (mA) 500 RqVB for VBE RqVC for VCE(sat) +0.5
0.2
MPS2222 MPS2222A
PACKAGE DIMENSIONS
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.015 0.020 0.500 0.250 0.080 0.105 0.100 0.115 0.135 MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.41 0.55 0.41 0.48 1.15 1.39 2.42 2.66 0.39 0.50 12.70 6.35 2.04 2.66 2.54 2.93 3.43
A R P
SEATING PLANE
L K D
X X G H V
1
C N N
SECTION XX
DIM A B C D F G H J K L N P R V
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 18004412447 or 6023035454 MFAX: [email protected] TOUCHTONE 6022446609 INTERNET: http://DesignNET.com
JAPAN: Nippon Motorola Ltd.; TatsumiSPDJLDC, 6F SeibuButsuryuCenter, 3142 Tatsumi KotoKu, Tokyo 135, Japan. 038135218315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 85226629298
*MPS2222/D*