HYOSUNG SHOP

INDUCTION MOTOR ORDER NO.

DATA SHEET NT111B

SHEET OF CUSTOMER :
FOR APPROVAL JOB NO. : ITEM NO. :
SERVICE : SITE : QUANTITY : SETS
GENERAL DATA PERFORMANCE DATA
FRAME NO. 215T OUTPUT 7.5 KW 10 HP
TYPE TEFC POLES 2 Poles
ENCLOSURE * TE ROTOR TYPE SQUIRREL CAGE
COOLING METHOD ** FC STARTING METHOD DOL
FREQUENCY 60 Hz
PHASE 3 PHASE
INSULATION CLASS F PRIMARY
TEMP. RISE AT FULL LOAD VOLTAGE 575 V
RES. METHOD 80 ¡É NO LOAD CURRENT 3.1 A
THERMO. METHOD FULL LOAD CURRENT 9.7 A
LOCATION INDOOR STARTING CURRENT 64.8 A
ALTITUDE 1000 m SECONDARY
HUMIDITY 80 % VOLT(OPEN CIRCUIT) V
AMBIENT TEMP.(MAX. ), ¡É MIN -15 / MAX : 40 CURRENT(LOAD) A
RATING CONTINUOUS RES.(AT 25¡É LINE) ¥Ø
NEMA DESIGN B EFFICIENCY
MOUNTING HORIZONTAL AT 1 / 2 LOAD %
BEARING TYPE ANTI-FRICTION AT 3 / 4 LOAD %
UNLOAD / LOAD BRG. NO. 6206ZZ / 6208ZZ AT FULL LOAD 91.0 %
BRG. LUBRICATION GREASE POWER FACTOR
PROTECTION GRADE IP44 AT 1 / 2 LOAD %
AT 3 / 4 LOAD %
SERVICE FACTOR 1.15 AT FULL LOAD 87.0 %
DRIVE SPEED (AT FULL LOAD) 3500 RPM
SHAFT TORQUE
EXTENSION FULL LOAD 15.0 lb¤ýft
VERTICAL LOCKED ROTOR 33.0 lb¤ýft
EXTERNAL THRUST BREAK DOWN 37.5 lb¤ýft
MAX. LOAD WK2 AT MOTOR SHAFT
(At Direct On Line)
34.700 lb¤ýft2
ACCESSORIES (OPTIONAL) MOTOR APPROX. WEIGHT 155 lb
TEMPERATURE DETECTOR PAINTING (MUNSELL NO.) 7.5 BG 5/2
WINDING NO SUBMITTAL DRAWINGS
TYPE OUTLINE DIMENSION SMK0061H06
BEARING NO CONDUIT BOX & COVER SME2417H03
TYPE CHARACTERISTIC CURVE
SPACE HEATER NO
RATING PH V W
SLIDE BASE
SOLE PLATES <NOTE> EXCEPT FOR STATEMENTS SPECIFIED ON THIS SHEET,
TERMINAL BOX ANYTHING ELSE SHALL BE IN ACCORDANCE WITH
MAIN HYOSUNG STANDARD.
AUX. <REMARK>
APPLICATION STANDARDS 1. Above data are nominal values which have the
tolerance in accordanve with IEC34-1 or NEMA MG1.

* EP : EXPLOSION PROOF DP : DRIP PROOF DATE PREPD BY CHKD BY APPRVD BY

TE: TOTALLY ENCLOSED WPII : WEATHER PROTECTED II
** SC : SELF COOLED TC : TUBE COOLED
00-06-05 K.S.LEE P.S.PARK M.C.HAN
FC : FAN COOLED WC : WATER COOLED
***SHOULD CHECK ATTACHED DATA SHEET
¾ç½Ä TE-25-0102-2A4 A4(210x297)