AutoCad Basic Tutorial

Launching AutoCad
1. Start 2. 3D and CAD 3. AutoCad

Typing Commands
Typing a Command All AutoCAD commands can be typed in at the command line. Many commands also have one or two letter aliases that can also be typed as shortcuts to the commands. 1. Type the desired command at the command prompt. Command : LINE or 2. Type the commands alias. Command: L 3. Press ENTER/Space to end. 4. Type an option at the command prompt.

TIP: Many AutoCAD commands require you to press ENTER to complete the command. You know you are no longer in an AutoCAD command when you see a blank command line.

Reissuing the Last Command The last used AutoCAD command can be re-entered by one of the following three methods of ENTER. The ENTER key on the keyboard will always act as ENTER, the SPACEBAR and RIGHT MOUSE will act as enter most of the time (exceptions include placing TEXT). 1. Press the ENTER key on the keyboard or 2. Press the Space bar on the keyboard. or 3. Click the right mouse button.

Pointing Device (Mouse)

AutoCAD uses either a mouse or digitizing tablet to select objects in a drawing. Left Mouse Button Used to pick or select objects 1. Click the left mouse button to select an object area in the drawing. 2. Press ESC twice to deselect an object (or to cancel a command). Right Mouse Button Used to enter a command, repeat last command, or access shortcut menus. 1. Click the right mouse button.

TIPS: SHIFT + the right mouse button brings up the object snap menus. Various screen locations for the mouse brings up different menus. menus.

5.2 PAN
Shifts the location of a view. 1. Choose View, Pan. or 2. Click the Pan icon. or 3. Type PAN from the command prompt. Command: PAN or P

TIPS:
While in the PAN command, click with the right mouse button to see the following menu.

Panning can also be done by using the window scroll bars

5.1 ZOOM
Increases or decreases the apparent size of objects in the current viewport 1. Choose View, Zoom. or 2. Click a Zoom icon. or 3. Type ZOOM at the command prompt. Command: Zoom or Z 4. Type One of the following zoom options:

The following are basic zoom options: All Extents Previous Window Places entire drawing (all visible layers) on display at once. Forces a regeneration. Displays current drawing content as large as possible. Restores previous view. Designates rectangular area to be drawn as large as possible. Magnification relative to ZOOM All display Magnification relative to current display (1X) Specifies center point and new display height. Permits you to pan a box representing the viewing screen around the entire generated portion of the drawing and enlarge or shrink it.

Number Number X Center Dynamic

TIPS:
-While in the ZOOM command, click with the right mouse button to see the menu to the right.

2.2 Creating a New Drawing

NEW Command
Creates a new drawing file. 1. Choose File, New. or 2. Press CTRL + N or 3. Click the New icon. or 4. Type NEW at the Command prompt. Command: NEW 5. 6. 7. Choose Click Save One of the options for creating a new drawing. The OK button. the drawing as another name.

TIP: New drawings can also be created from Template Files.

1.11 Undo and Redo

Reverses the last action. 1. Choose Edit, Undo. or 2. Click the Undo icon. or 3. 4. Press CTRL + Z. Type U at the command prompt to undo the last command. Command: U

Redo
Reverses the effects of a single UNDO or U command. 1. Choose Edit, Redo. or 2. Click the Redo icon. or 3. Type REDO at the command prompt to redo the last undo command. Command: REDO TIPS: -UNDO has no effect on some commands and system variables, including those that open, close, or save a window or a drawing, display information, change the graphics display, regenerate the drawing, or export the drawing in a different format.

-REDO must immediately follow the U or UNDO command.

1.12 Function Keys and Accelerator Keys

2.1 Open Existing Drawings

1. Choose File, OPEN. or 2. Press CTRL + O. or 3. Click the OPEN icon. or 4. Type OPEN at the command prompt. Command: OPEN 5. 6. 7. 8. Press Double Click Click Click ENTER the desired directory to find the drawing to open. the drawing name to open. The OK button.

TIP: -Preview shows a bitmap image of the drawing selected. This image is the view that was last saved in the drawing. It will not show a preview of drawings saved before R13 AutoCAD.

Quick Save
The QSAVE command is equivalent to clicking Save on the File menu. If the drawing is named, AutoCAD saves the drawing using the file format specified on the Open and Save tab of the Options dialog box and does not request a file name. If the drawing is unnamed, AutoCAD displays the Save Drawing As dialog box (see SAVEAS) and saves the drawing with the file name and format you specify. 1. Press CTRL + S. or 2. Click the Save icon. or 3. Type QSAVE at the command prompt, Command:QSAVE

TIPS: Drawings can be saved as different versions of AutoCAD (e.g. R13, R14, R 2000, etc.)

AutoSave settings under Tools, Options

Useful Commands

7.1 Running Object Snaps

An object snap mode specifies a snap point at an exact location on an object. OSNAP specifies running object snap modes, which remain active until you turn them off. 1. Choose Tools, Drafting Settings... or 2. Type DDOSNAP at the command prompt Command: DDOSNAP or 3. 4. 5. Click OSNAP on the Status Bar.

Right Click the Object Snap TAB. Choose an object snap to turn ON/OFF from the dialog box.

AutoCAD 2D Tutorial UNITS Command 8.5

1. 2. Choose Type Format, Units... or DDUNITS at the command prompt. Command: DDUNITS or UN 3. 4. Choose Choose a units and angle setting. a precision setting.

- 58 -

3.1 Line Command

Creates single straight line segments 1. Choose Draw, Line. or 2. Click the Line icon. or 3. Type LINE from the command prompt Command: LINE or L 4. 5. 6. 7. 8. Press Pick Pick Pick Press ENTER From point: (point) Specify next point or [Close/Undo]:(point) Specify next point or [Close/Undo]:(point) ENTER to end line sequence or 9. Type U to undo the last segment To point: U (undo) or 10. Type C to create a closed polygon To point : C (close)

TIPS: You can continue the previous line or arc by responding to the From point: prompt with a space or ENTER. Choose the right mouse button for the line pop-up menu to appear while in the line command

AutoCAD 2D Tutorial Pline Command 15.1

A polyline is a connected sequence of line segments created as a single object. You can create straight line segments, arc segments, or a combination of the two. 1. Choose Draw, Polyline. or 2. 3. Pick Type the Pline icon. PLINE at the command prompt Command : PLINE or PL 4. 5. Pick Type A point on the drawing to start the polyline From point:(select) One of the following options Arc/Close/Halfwidth/Length/Undo/Width/<endpoint of line>: or 6. Pick A point to continue drawing Arc/Close/Halfwidth/Length/Undo/Width/<endpoint of line>: (pick point)

Polyline as one segment

- 128 -

3.4 Orthogonal Lines

Controls lines from being drawn at various angles to straight lines. When the snap grid is rotated, ortho mode rotates accordingly.

1.

Press

Function Key F8. or

2.

Double Click

ORTHO from the Status Bar. or

3.

Press

CTRL + L.

Line drawn with ORTHO ON

Line drawn with ORTHO OFF

AutoCAD 2D Tutorial Rectangle 16.2

1. Choose Draw, Rectangle. or 2. 3. Click Type the Rectangle icon. or Rectang at the command prompt Command: RECTANG Chamfer/Elevation/Fillet/Thickness/Width/ <First corner>: 4. 5. Pick Pick first corner. other corner or type coordinates (i.e. @4,2).

- 137 -

3.6 Circles
Circle Command
1. Choose Draw, Circle. or 2. Click the Circle icon. or 3. Type CIRCLE at the command prompt. Command: CIRCLE 4. Type One of the following options: 3P/2P/TTR/<<center point>>: or 5. 6. Pick Type A center point. A radius or diameter. or 7. Pick A radius or diameter Diameter/<<radius>>:
Circle, Tangent, Tangent Radius Circle, Center Diameter Circle, Center Radius

TIPS: - To create circles that are the same size, press ENTER when asked for the circle radius. - When selecting a circle with a pickbox, be sure to select the circumference of the circle.
Circle, Tangent, Tangent, Tangent

3.7 Arc Command

1. Choose Draw, Arc. or 2. Click the Arc icon. or 3. Type ARC at the command prompt Command: ARC 4. Draw One of the arcs.

TIPS:
-Except for 3 point arcs, arcs are drawn in a COUNTERCLOCKWISE direction. - While in the arc command, press the right mouse button to select the following options for arcs:

Arc Examples 3 point arc Start ,center, chord length

start, center, end

Start, end, radius

Start , center, included angle

Start, end, direction

AutoCAD 2D Tutorial Spline 16.3

The SPLINE command creates a particular type of spline known as a nonuniform rational B-spline (NURBS) curve. A NURBS curve produces a smooth curve between control points

1. 2. 3.

Choose Click Type

Draw, Spline. or the Spline icon. or SPLINE at the command prompt Command: SPLINE

4.

Pick

A start point for the spline Object / <Enter first point>: (pick point)

5.

Pick

Points until youare done drawing splines Enter point:(pick points)

6. 7.

Press Pick

Enter or close to complete the spline Starting tangent point for the spline Enter start tangent (pick point)

8.

Pick

Ending tangent point for the spline Enter end tangent: (pick point)

- 138 -

Editing

AutoCAD 2D Tutorial Editing Polylines 15.2

1. Choose Modify, Polyline. or 2. 3. Pick Type the Pedit icon from the Modify II toolbar. PEDIT at the comma nd prompt Command: PEDIT 4. Pick Pick a polyline to edit Select Polyline:(pick) 5. Type One of the following options:Close/Join/ Width/Edit vertex/FitCurve/Spline/Curve/ Decurve/Undo/eXit

PEDIT options:
Close Join Width Fit curve Spline Curve Decurve Edit Vertex Closes open polyline segments Connects polylines, lines, and arcs to existing polylines. Changes the width for all polyline segments. Creates curved arc segments around pline vertices at the direction you specify. Creates a curve through control points on a polyline. Straightens curved segments. Displays the following Edit Vertex Options:

Polyline width change

Splined Polyline

- 130 -

AutoCAD 2D Tutorial Move Command 10.1

1. Choose Modify, Move. or 2. Click the Move icon. or 3. Type MOVE at the command prompt Command: MOVE or M 4. Pick Objects to move Select objects: (select) 5. Pick A point to move from Base point or displacement: (pick point) 6. Pick A point to move to Second point of displacement: (pick point)

Circle before move

Circle after move

TIP:
To move an object a specified distance, type a distance at the second point of displacement prompt: @1<0

- 74 -

AutoCAD 2D Tutorial Copy Command 10.2

1. Choose Modify, Copy. or 2. Click the Copy icon. or 3. Type COPY at the command prompt. Command: COPY or CP 4. Pick Objects to copy. Select objects: (select) 5. Pick A point to move from. Base point or displacement/Multiple: (pick point). 6. Pick A point to copy to. Second point of displacement: (pick point) or 7. Type A point to copy to. Second point of displacement: @ 1<0

Duplicate objects copied

Multiple objects copied

TIP:
To copy many objects in the same copy command, type M for Multiple at the Base point or displacement/Multiple option.

- 75 -

AutoCAD 2D Tutorial Offset Command 10.4

Offset Distance
To offset a specified distance: 1. Choose Modify, Offset. or 2. Choose the Offset icon. or 3. Type OFFSET at the command prompt. Command: OFFSET or O 4. Type The distance to offset. Offset distance or <Through point>: (number) 5. 6. Pick Pick The object to offset. Select object to offset: (select object) A side to offset object to. Side to offset: (pick side) 7. Pick Another object to offset Select object to offset: (pick side) or 8. Press Enter to end the command.

Offsetting objects by specifying a distance

- 77 -

AutoCAD 2D Tutorial Explode Command 15.4

1. Choose Modify,Explode. or 2. 3. Pick Type the Explode icon. EXPLODE at the command prompt. Command: EXPLODE or 4. Pick The object to explode. Select objects: (pick)

Polyline before explode

Polyline (line) after explode

- 133 -

AutoCAD 2D Tutorial EXTEND 10.5

1. Choose Modify, Extend. or 2. Click the Extend icon. or 3. Type EXTEND at the command prompt Command: EXTEND Select boundary edge(s)... 4. Pick The BOUNDARY edge to extend to Select objects: (select) 5. Press ENTER to accept the boundary edge Select objects: (press enter) 6. Pick The objects to extend <Select object to extend> / Project / Edge / Undo: Select an object, enter an option, or press enter : (select) 7. Press ENTER when you are done choosing objects
Lines Extended to an Arc (Arc is boundary edge)

TIP:

Use the object selection option FENCE to choose multiple objects

- 79 -

AutoCAD 2D Tutorial Stretch 13.2

1. 2. 3. Choose Click Type Modify, Stretch. or the Stretch icon. STRETCHat the command prompt. Command : STRETCH Select objects to stretchby window... 4. Type C to choose CROSSING window Select objects: C 5. 6. Pick Pick A first corner to stretch. First corner: (point) The opposite corner to window the objects to stretch. Other corner: (point)

7. 8.

Press Pick

ENTER to accept objects to stretch. A base point to stretch from Base point: (point)

- 114 -

AutoCAD 2D Tutorial
9. Pick A point to stretch to Newpoint: (point) or 10. Type A distance to stretch. New point: @1<0

TIP: The Stretch command must use a CROSSING window or aCROSSING POLYGON window.

- 115 -

AutoCAD 2D Tutorial TRIM 10.6

The TRIM command allows you to trim objects in a drawing so they end precisely at a cutting edge defined by one or more other objects in the drawing. 1. Choose Modify, Trim. or 2. 3. Click Type the Trim icon. TRIM at the command prompt Command: TRIM Select cutting edge(s)... 4. Pick The CUTTING edge to extend to Select objects: (select) 5. Press ENTER to accept the cutting edge Select objects: (press enter) 6. Pick Objects to trim <Select object to trim> / Project / Edge / Undo: Select an object, enter an option, or press enter 7. Press ENTER when you are done choosing objects Select object to trim/Undo: (press enter)
Lines Trimmed to an Arc (Arc is cutting edge)

TIP: Hold the SHIFT key to interactively extend instead of trim.

- 80 -

AutoCAD 2D Tutorial Break 13.1

1. 2.

Choose Click

Modify, Break. or the Break icon. or

3. 4.

Type Pick

BREAK at the command prompt. Command: BREAK Object to break. Select object: (select one object)

5.

Pick

A second break point. Enter second point : (point)

or 6. Type F to choose a different break point Enter second point (or F for first point):(F)

- 112 -

AutoCAD 2D Tutorial MIRROR 10.7

1. Choose Modify, Mirror. or 2. Click the Mirror icon. or 3. Type MIRROR at the command prompt. Command: MIRROR 4. Pick Objects to mirror. Select objects:(select) 5. 6. 7. Pick Pick Type First point of mirror line: (point) Second point: (point) Yes to delete the original objects and No to keep them. Delete old objects? Y or N

Mirror Line

- 82 -

AutoCAD 2D Tutorial ROTATE 10.9

1. Choose Modify, Rotate. or 2. Click the Modify icon. or 3. Type ROTATE at the command prompt Command : ROTATE 4. Pick Objects to rotate: Select objects:(select) 5. Pick A pivot point to rotate around Base point: (point) 6. Type A rotation angle<Rotation angle>/Reference: (number) or 7. Pick A rotation angle<Rotation angle>/Reference: (point)

- 84 -

AutoCAD 2D Tutorial SCALE 10.10

1. Choose Modify, Scale. or 2. Click the Scale icon. or 3. Type SCALE at the command prompt Command: SCALE Select objects: (select objects) 4. 5. Pick Type A pivot point to scale about Base point: (point) A rotation angle<Scale factor>/Reference:(number) or 6. Pick A scale factor<Scale factor>/Reference: (point) Scale factor/Reference: (points)

- 86 -

AutoCAD 2D Tutorial Text Command 11.1

Text
Creates a single-line text object 1. Type TEXT at the command prompt Command: TEXT or 2. 3. Pick Pick the Single Line Text icon from the Text Toolbar. A start point Justify/Style/<Start Point>: (point) or 4. 5. Type Type J to change the justification or S to change the text style. A text height Height <default>: (type value or pick two points) 6. Type A rotation angle Rotation angle <default>: (angle or point) 7. Type A text string Text: (type text string) 8. Press enter to exit the Text: prompt.

DTEXT (Dynamic Text)

Creates a single-line text object, showing the text dynamically on the screen as it is entered. 1. Choose Draw, Text, Single Line Text. or 2. Type DTEXT at the command prompt Command : DTEXT 3. Follow the steps 3-8 from above.

- 89 -

Layers

AutoCAD 2D Tutorial Introduction to Layers and Layer Dialog Box12.1

1. Choose Format, Layer. or 2. Type LAYER at the command prompt. Command: LAYER (or LA) or 3. Pick the layers icon from the Layer Control box on the object properties toolbar.

AutoCAD 2005 Layer Properties

- 101 -

AutoCAD 2D Tutorial Layer Options 12.2

? Make Set New ON OFF Color Ltype Freeze Thaw Lock Unlock Plot No Plot LWeight Lists layers, with states, colors and linetypes. Creates a new layer and makes it current. Sets current layer. Creates new layers . Turns on specified layers. Turns off specified layers. Assigns color to specified layers. Assigns linetype to specified layers. Completely ignores layers during regeneration. Unfreezes specified layers Ltype. Makes a layer read only preventing entities from being edited but available visual reference and osnap functions. Places a layer in read write mode and available for edits. Turns a Layer On for Plotting Turns a Layer Off for Plotting Controls the line weight for each layer

TIP:
Layers can be set using the command line prompts for layers. To use this, type LAYER or -LA at the command prompt 1. 2. Type Type Command: -LAYER or LA One of the following layer options ?/Make/Set/New/ON/OFF/Color/Ltype/Freeze/Thaw:

- 102 -

AutoCAD 2D Tutorial Layer Shortcuts 12.3

Changing the Layer of an Object

1. 2.

Click Select

Once on the object to change. the desired layer from the Layer Control Box dropdown. AutoCAD will move the object to the new layer.

Select layer Select object first

- 103 -

Colours + Line Weights

AutoCAD 2D Tutorial Color Command 12.6

1. Choose Format, Color. or 2. Type DDCOLOR at the command prompt. Command: DDCOLOR or COL or 3. Choose Color on the Object Properties toolbar and then select a color from the list or select Other to display the Select Color dialog box.

TIP:
These settings ignore the current layer settings for color. By Layer If you enter bylayer, new objects assume the color of the layer upon which they are drawn. By Block
If you enter byblock, AutoCAD draws new objects in the default color (white or black, depending on your configuration) until they are grouped into a block. When the block is inserted in the drawing, the objects in the bloc k inherit the current setting of the COLOR command.

- 107 -

AutoCAD 2D Tutorial Linetypes 12.7

Loading and Changing Linetypes

1.

Choose

Format, Linetype... or

2.

Type

DDLTYPE at the command prompt. Command:DDLTYPE or LT

3.

Choose

Load... to see a list of available linetypes.

4.

Choose

the desired linetype to assign.

5.

Click

OK.

- 108 -

AutoCAD 2D Tutorial Lineweights 12.8

Loading and Changing Lineweights

1. Choose Format, Lineweight... or 2. Type LINEWEIGHT at the command prompt. Command: LINEWEIGHT or LWEIGHT or 4. Pick a lineweight to make current from the Object Properties menu.

TIPS: Lineweights can also be assigned to layers. The Display Lineweights feature can be turned on/off o n the status bar to show or not show lineweights in the drawing, thus making regenerations faster.

Lineweights are displayed using a pixel width in proportion to the realworld unit value at which they plot. If you are using a high-resolution monitor, you can adjust the lineweight display scale to better display different lineweight widths.

- 109 -

AutoCAD 2D Tutorial Object Properties 12.9

1. 2. Choose Click Modify, Properties. or the Properties icon. or 3. Type DDCHPROP or DDMODIFY at the command prompt. Command: DDCHPROP (CH) or DDMODIFY (MO) 4. Pick Objects whose properties you want to change Pick a window for DDCHPROP, single object for DDMODIFY. Select objects:(select) 5. Press ENTER to accept objects. Select objects: (press enter) 6. Choose One of the following properties to change.

- 110 -

Other Useful Functions

AutoCAD 2D Tutorial

BHATCH Command 17.1

1. Choose Draw, Hatch... or 2. Click the Hatchicon. or 3. Type BHATCH at the command prompt Command: BHATCH

- 152 -

AutoCAD 2D Tutorial Measuring Distances 8.2

1. Choose Tools, Inquiry, Distance. or 2. Click the Distance icon from the Inquiry Toolbar. or 3. Type DIST at the command prompt Command: DIST 4. Pick The first point to measure from First point: pick point 5. Pick The second point to measure to Second point: pick point

Distance Between Circle Centers

TIP:
Be sure to use Object Snaps with the MEASURE command.

- 55 -

AutoCAD 2D Tutorial

Linear Dimensions 26.1

1. Choose Dimension, Linear. or 2. Click the Linear Dimension command from the toolbar.

or 3. Type DIM at the command prompt. Command: DIM Dim: HOR or VER

- 223 -

AutoCAD 2D Tutorial

Aligned Dimensions 26.2

1. Choose Dimension, Aligned. or 2. Click the Aligned Dimension command from the toolbar.

or 3. Type DIM at the command prompt. Command: DIM Dim: ALIGNED

- 224 -

AutoCAD 2D Tutorial

Radial Dimensions 26.3

1 . Choose 2 . Click Dimension, Radius or Diameter. or the Radial Dimensions command from the toolbar.

or 3 . Type DIM at the command prompt. Command: DIM Dim: RADIUS or DIAMETER

- 225 -

AutoCAD 2D Tutorial Calculating Areas 8.3

1. Choose Tools, Inquiry, Area. or 2. Click the Area icon. or 3. Type AREA at the command prompt Command: AREA 4. Pick The first point for area calculation <First point>/Object/Add/Subtract: pick 5. 6. 7. Pick Pick Press Next point: pick Next point: pick ENTER when you are finished choosing points. Area of Rectangle

Object Add Subtract

Allows user to pick an object to calculate area (circle or polyline). Adds separate areas for a total area calculation Subtracts areas from each other.

TIPS:
Be sure to use Object Snaps with the MEASURE command To subtract an area, you must first be in add mode to add the first area.

- 56 -

AutoCAD 2D Tutorial
Plot Settings

1. 2. 3. 4. 5. 6. 7. 8.

Choose Choose Choose Choose Choose Choose Choose Click

the Plot Settings tab. the appropriate paper size based on the chosen plotter. the paper units (inches or mm). the drawing orientation (Portrait, Landscape, Upside down). the plotting area. the plot scale. plot to center or specify an x or y offset. OK.

- 65 -

1.13 On-Line Help

1.

Choose Help, AutoCAD Help. or

2.

Click the Help icon. or

3.

Type HELP at the command prompt Command: HELP or

4.

Press Function Key F1