Scribd
Upload
20K views2 pages

Asme Allowable Stress Table

This document provides a standard allowable stress table for various materials including carbon steel, stainless steels, nickel alloys, titanium, and zirconium. It lists the material grade or alloy, minimum yield stress, and allowable stresses in ksi for temperatures ranging from 100 to 800 degrees Fahrenheit according to ASME Section VIII Division 1 code. Allowable stresses decrease with increasing temperature for each material. Some materials are not permitted by the code at the higher temperatures.

Uploaded by

mani170487
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
20K views2 pages

Asme Allowable Stress Table

This document provides a standard allowable stress table for various materials including carbon steel, stainless steels, nickel alloys, titanium, and zirconium. It lists the material grade or alloy, minimum yield stress, and allowable stresses in ksi for temperatures ranging from 100 to 800 degrees Fahrenheit according to ASME Section VIII Division 1 code. Allowable stresses decrease with increasing temperature for each material. Some materials are not permitted by the code at the higher temperatures.

Uploaded by

mani170487
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

STANDARD ALLOWABLE STRESS TABLE

Material

P
No.

UNS
No.

ALLOWABLE STRESS, ksi

MIN. YIELD STRESS, ksi

100 200 300 400 500 600 700 800 100 200 300 400 500 600 700

800

SA 516-70 Carbon Steel

K02700 20.0 20.0 20.0 20.0 20.0 19.4 18.1 12.0 38.0 34.8 33.6 32.5 31.0 29.1 27.2

25.5

Type 304 Stainless Steel

S30400 20.0 20.0 18.9 18.3 17.5 16.6 15.8 15.2 30.0 25.0 22.4 20.7 19.4 18.4 17.6

16.9

Type 304L Stainless Steel

S30403 16.7 16.7 16.7 15.8 14.7 14.0 13.5 13.0 25.0 21.4 19.2 17.5 16.4 15.5 15.0

14.5

Type 309S Stainless Steel

S30908 20.0 20.0 20.0 20.0 19.4 18.8 18.2 17.7 30.0 26.3 24.2 22.7 21.6 20.8 20.32

19.7

Type 310 Stainless Steel

S31008 20.0 20.0 20.0 19.9 19.3 18.5 17.9 17.4 30.0 26.5 24.2 22.6 21.4 20.6 19.9

19.4

Type 316 Stainless Steel

S31600 20.0 20.0 20.0 19.3 18.0 17.0 16.3 15.9 30.0 25.9 23.4 21.4 20.0 18.9 18.2

17.7

Type 316L Stainless Steel

S31603 16.7 16.7 16.7 15.7 14.8 14.0 13.5 12.9 25.0 21.3 19.0 17.5 16.4 15.6 15.0

14.4

Type 317L Stainless Steel

S31703 20.0 20.0 19.6 18.9 17.7 16.9 16.2 15.5 30.0 25.5 22.8 21.0 19.7 18.7 18.0

17.2

Type 347 Stainless Steel

S34700 20.0 20.0 18.8 17.8 17.2 16.9 16.8 16.8 30.0 27.6 25.7 24.0 22.6 21.5 20.7

20.3

Alloy 200

41 N02200 10.0 10.0 10.0 10.0 10.0 10.0 NP

NP 20.0 20.0 20.0 20.0 18.9 17.2

Alloy 201

41 N02201 8.0

7.2 12.0 11.5 11.3 11.2 11.2 11.2 11.1

10.8

Alloy 400

42 N04400 18.7 16.4 15.2 14.7 14.7 14.7 14.6 14.3 28.0 24.5 22.8 22.1 22.0 22.0 21.9

21.4

Alloy 600

43 N06600 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 35.0 32.0 31.2 30.7 30.3 29.9 29.4

28.7

Alloy 625

43 N06625 34.3 34.3 34.3 33.6 32.9 32.4 31.8 31.2 55.0 53.0 51.4 49.9 48.5 47.2 46.1

45.2

C-22(c) Alloy

44 N06022 28.6 28.6 28.2 27.2 26.5 26.0 25.6 25.3 45.0 40.1 36.9 34.3 32.2 30.6 29.4

28.6

Alloy C-276

44 N10276 27.3 27.3 27.3 27.3 26.9 25.2 24.0 23.1 41.0 37.3 34.5 32.0 29.8 28.0 26.7

25.7

B-3(c) Alloy

44 N10665 31.4 31.4 31.4 31.4 31.4 31.2 30.9 30.6 51.0 47.9 45.4 43.4 41.9 40.8 39.8

38.7

Alloy 20

45 N08020 22.9 22.9 22.6 22.2 22.1 22.1 21.9 21.8 35.0 30.9 29.6 28.4 27.3 26.5 26.0

25.2

Alloy 800

45 N08800 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 30.0 27.7 26.6 25.8 25.1 24.5 23.8

23.2

Alloy 825

45 N08825 23.3 23.3 23.3 23.3 23.3 23.3 23.3 23.0 35.0 32.1 30.5 29.1 27.8 26.7 26.0

25.6

AL-6XN(c) Alloy 3/16" to


3/4"

45 N08367 27.1 27.1 25.7 24.6 23.8 23.3 22.9 22.6 45.0 39.3 35.7 32.9 30.8 29.1 27.9

27.0

Alloy 904L

45 N08904 20.3 16.7 15.1 13.8 12.7 11.9 11.4 NP 31.0 25.1 22.7 20.8 19.0 17.8 17.1

---

7.7

7.5

7.5

7.5

7.5

7.4

---

---

G-30(c) Alloy

45 N06030 23.3 23.3 23.3 22.5 21.9 21.3 20.5 19.7 35.0 30.0 27.5 25.8 24.6 23.6 22.8

21.9

Titanium Grade 2

51 R50400 14.3 12.4 10.3 8.8

7.6

6.5

NP

NP 40.0 31.5 25.6 19.6 14.8 14.8

---

---

Zirconium 702

61 R60702 15.7 13.7 11.2 9.1

7.4

6.0

5.2

NP 30.0 23.1 18.0 14.0 11.0 9.0

7.9

---

NOTES:
NP = Not Permitted by ASME Section VIII, Division 1 for use at this temperature.
Temperatures are in degrees Fahrenheit.
1 ksi = 1000 psi
Stresses listed above are the highest allowed by ASME Section VIII, Division 1 (A99 Addenda) for plate.

You might also like