Scribd
Upload
158 views1 page

CS7222310 V1005

The document summarizes a diplexer that enables frequency sharing between different cellular networks. The diplexer allows 806-960 MHz and 1710-2170 MHz signals to share the same feeder cable or antenna. It can be used near base stations or antennas and is suitable for indoor or outdoor use. Technical specifications include frequency bands, insertion loss, isolation, power handling, temperature range, and dimensions.

Uploaded by

Makhful Adhim
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
158 views1 page

CS7222310 V1005

The document summarizes a diplexer that enables frequency sharing between different cellular networks. The diplexer allows 806-960 MHz and 1710-2170 MHz signals to share the same feeder cable or antenna. It can be used near base stations or antennas and is suitable for indoor or outdoor use. Technical specifications include frequency bands, insertion loss, isolation, power handling, temperature range, and dimensions.

Uploaded by

Makhful Adhim
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Diplexer

806 960 MHz


CDMA 800 / GSM 900

1710 2170 MHz


GSM 1800 / UMTS

Designed for co-siting purposes Enables feeder sharing Can be used as a combiner near the BTS or
in a reciprocal function near the antenna Suitable for indoor or outdoor applications Wall or mast mounting Available as a single unit, or for XPol antennas as a double unit DC by-pass between all ports DC Stop available as an accessory
Port 1

Port 3

Single Unit
Port 2

Double Unit

Typical Attenuation Curves


Diagram I
Port 1 Port 3 Port 2 Port 3

Attenuation/dB

0 10 2000 2170 20 806 960 30 40 1710 2000

Technical Data
Type No. Pass band Band 1 Band 2 Insertion loss Port 1 Port 3 Port 2 Port 3 Isolation Port 1 Port 2 CS7222310 Single Unit
CS7222311 Double Unit

50 60

806 960 MHz 1710 2170 MHz Typically 0.15 dB (806 960 MHz) Typically 0.25 dB (1710 2000 MHz) Typically 0.35 dB (2000 2170 MHz) > 45 dB (806 824 MHz) > 50 dB (824 960 MHz) > 50 dB (1710 2170 MHz) < 1.2 (806 960 / 1710 2170 MHz) 50 < 250 W < 200 W < 160 dBc (2nd/3rd order; with 2 x 20 W) 55 ... +60 C 7-16 female Indoor or outdoor (IP 65) DC by-pass between all ports (max. 2500 mA) Wall mounting: With 4 screws (max. 8 mm diameter) Mast mounting: CS72199.01 for 45-125 mm pole 1.5 kg 2.9 kg 350 x 165 x 125 mm 350 x 165 x 170 mm 125 x 282 x 53.3 mm 125 x 282 x 97.7 mm (incl. mounting brackets) (incl. mounting brackets)

70 80 90 100 500 700 900 1100 1300 1500 1700 1900 2100 2300 2500

Frequency/MHz

Diagram II
Port 1 Port 3 Port 2 Port 3

936.2137/a

VSWR Impedance Input power Band 1 Band 2 Intermodulation products Temperature range Connectors Application Special features Mounting Weight Packing size Dimensions (w x h x d)

Attenuation/dB

0 0.1 0.2 0.3 0.4 0.5 0.6 2000 2170 0.7 806 960 0.8 0.9 1.0 500 1710 2000

Subject to alteration.

700

900

1100 1300 1500 1700 1900 2100 2300 2500

Frequency/MHz

Made for NOKIA by Kathrein

You might also like