Scribd
Upload
59 views1 page

Tutorial 2

This document discusses current transformers (CTs) and potential transformers (PTs) used in power systems. It asks questions about the different types of CTs and their construction, advantages, and disadvantages. It also asks how CT burden is calculated, the tests performed on CTs, and the different classes of CTs and their applications. Additional questions cover CT saturation, factors affecting it, and its effects. It asks how to specify a CT, calculate accuracy limits, and measure transients with a CT. Potential transformer errors and the procedure for selecting a PT are also addressed.

Uploaded by

Animesh Jain
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
59 views1 page

Tutorial 2

This document discusses current transformers (CTs) and potential transformers (PTs) used in power systems. It asks questions about the different types of CTs and their construction, advantages, and disadvantages. It also asks how CT burden is calculated, the tests performed on CTs, and the different classes of CTs and their applications. Additional questions cover CT saturation, factors affecting it, and its effects. It asks how to specify a CT, calculate accuracy limits, and measure transients with a CT. Potential transformer errors and the procedure for selecting a PT are also addressed.

Uploaded by

Animesh Jain
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DEPARTMENT OF ELECTRICAL ENGINEERING INDIAN INSTITUTE OF TECHNOLOGY, ROORKEE

EE-530 : Power System Instrumentation Tutorial: 2 1 2 3 4 5 Explain different types of CTs and PTs with their construction and relative advantages and disadvantages. How CT bourdon is calculated? Explain different tests performed on current transformers. Which are different classes of CTs? Explain with their application. A protection relay is 32 meters away from a protective CT. they are connected with copper 4-wire connection of 6 mm2. If burden of relay is less than 15 m (5 A input), calculate actual burden of the CT at 750C. What is CT saturation? Which are different factors which effects saturation of CT? Explain effect of CT saturation on protection system. How to specify a current transformer? Secondary coil resistance of the CT is 0.1 and secondary burden is 0.115 . The CT is rated as 300/5, 5P20, 10 VA. Calculate actual accuracy limit factor. Explain different magnitude and phase errors introduced by a potential transformer. Explain systematic procedure for selection of a PT. Explain measurement with CT in transient conditions.

6 7 8 9 10 11

You might also like