Scribd
Upload
51 views1 page

5000TD5

The document provides errata, specification modifications, and documentation changes for the DS5000(T) chip. It details an issue where MOVC instructions may return incorrect data under specific conditions including a certain port programming, memory location, data value, MCON register value, and voltage level. The document also notes there are no specification modifications or documentation changes.

Uploaded by

nish1802
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views1 page

5000TD5

The document provides errata, specification modifications, and documentation changes for the DS5000(T) chip. It details an issue where MOVC instructions may return incorrect data under specific conditions including a certain port programming, memory location, data value, MCON register value, and voltage level. The document also notes there are no specification modifications or documentation changes.

Uploaded by

nish1802
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DALLAS SEMICONDUCTOR ERRATA SHEET

DS5000(T)

Revision D5

7/29/97

Revision D5 may be identified by the date/revision brand yywwD5, where yy and ww are the year and workweek of manufacture, respectively. This errata sheet is valid only when used in conjunction with the most current version of the data sheet available from Dallas Semiconductor via the Internet. This document contains the following types of information: Errata: These are design errors which deviate from published specifications. Errata are intended to be fixed in subsequent revisions of the device. Specification Modifications: These are changes to the published specifications and will be reflected in the next update of the documentation and apply to all subsequent revisions of the device. Documentation Changes: This information includes typographical mistakes, errors, omissions or clarifications of device operation. Items listed in this section will be reflected in the next update of the documentation. These errata, specification modifications and documentation changes apply to all memory configurations and speed grades unless otherwise noted. ERRATA 1. Under the following conditions, MOVC instructions may return incorrect data: a. Port 0 must be programmed to 00h, b. The memory being addressed must be on the embedded bus, c. The data being read from memory must be non-zero, d. The MCON register must be 98h, A8h, B8h, or C8h, e. VCC must be greater than 5.0 V.

Work Around: Avoid the above mentioned conditions. SPECIFICATION MODIFICATIONS 1. NONE DOCUMENTATION CHANGES 1. NONE

Page: 1 of 1

You might also like