Scribd
Upload
39 views3 pages

MT Lab Objectives

This document outlines the objectives and rules of the Manufacturing Technology Lab at Sree Vidyanikethan Engineering College. It provides dos and don'ts for student safety and instructions, such as obtaining a lab manual, wearing proper attire, and following instructor safety rules. The objectives of the lab are to help students understand manufacturing processes and materials, traditional and modern techniques like powder metallurgy, forming processes, and joining methods to prepare them for industry.

Uploaded by

T Hari Prasad
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
39 views3 pages

MT Lab Objectives

This document outlines the objectives and rules of the Manufacturing Technology Lab at Sree Vidyanikethan Engineering College. It provides dos and don'ts for student safety and instructions, such as obtaining a lab manual, wearing proper attire, and following instructor safety rules. The objectives of the lab are to help students understand manufacturing processes and materials, traditional and modern techniques like powder metallurgy, forming processes, and joining methods to prepare them for industry.

Uploaded by

T Hari Prasad
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

SREE VIDYANIKETHAN ENGINEERING COLLEGE

(Autonomous) Sree Sainath Nagar, Tirupati - 517102.

Department of Mechanical Engineering


MAUFACTURING TECHNOLOGY LAB

DOS
1. EVERY STUDENT MUST OBTAIN A COPY OF MANUFACTURING TECHNOLOGY LAB MANUAL 2. 3. DRESS CODE AND WEARING OF ID CARD IS MANDATORY STUDENTS MUST COME TO THE LAB ON TIME AND ENTER THEIR NAME IN THE LOGIN REGISTER. THE STUDENTS WILL NOT BE ALLOWED TO PRACTICE IN THAT SESSION IF THE LATENESS IS MORE THAN FIFTEEN MINUTES UNTIL THEY HAVE AUTHORIZED PERMISSION. 4. THERE IS NO EXTENSION OF LABORATORY TIME.STUDENTS SHOULD TRY TO FINISH THE ASSIGNMENT WITHIN THE REGULAR LABORATORY TIME.AT THE END OF THE SESSION,THE WORKPIECE MUST BE SUBMITTED REGARDLESS OF THE COMPLETENESS.THE MARKS WILL BE GIVEN BASED ON THE QUALITY OF WORK AND WORKPIECE. 5. 6. STUDENTS MUST OBEY ALL INSTRUCTIONS, SAFETY RULES FROM INSTRUCTORS. FAILING TO COMPLY WITH THE INSTRUCTIONS,SAFETY RULES, CARELESS HANDLING OF MACHINE S AND COMMONSENSE,MAY RESULT IN SEVERE INJURY 7. AT THE END OF EACH EXPERIMENT, STUDENTS MUST CLEAR OFF ALL TOOLS AND MATERIALS FROM THE WORK AREA. 8. POWER TO THE MACHINES WILL BE PUT OFF 10 MINUTES BEFORE THE END OF LABORTORY SESSION TO ALLOW THEM TO RETURN THE TOOLS 9. 10. 11. CARE SHOULD BE TAKEN WHILE REMOVING THE PATTERN USE ALWAYS RIGHT TOOLS FOR RIGHT JOB. STUDENTS MUST AOVID ANY UNSAFE ACT, E.G, RUNNING, PLAYING, MISUSE OF THE TOOLS, PRESSING AN UNKNOWN BUTTON, AND OPERATING AN UNKNOWN SWITCH OR LEVER 12. WHILE WELDING WEAR APRON ,GOGGLES OR SHIELD IN ORDER TON PROTECT YOUR BODY AND EYES. 13. KNOW THE LOCATION AND OPERATION OF EVERY FIRE EXTINGUISHER IN THE SHOP

MAUFACTURING TECHNOLOGY LAB

DO NOTS

1. 2. 3. 4.

NEVER WORK IN A PLACE WHERE THERE IS NO SUFFICIENT LIGHT. DONT USE CHISEL AS A SCREW DRIVER DONT USE SPANNER OR FILE AS A HAMMER DONT FORGET TO TURN THE DRAG UPSIDE DOWN,WHILE PREPARING MOULD CAVITY

5.

NEVER UNDERTAKE ANY WORK UNLESS THE POTENTIAL HAZARDS OF THE OPERATION ARE KNOWN AS PRRECISELY AS POSSIBLE,AND APPROPRIATE SAFETY PRECAUTIONS ARE ADOPTED.

6. 7. 8.

NEVER USE HAMMERS WITH LOOSE HEADS DONT KEEP WORKING TOOLS AT THE EDGE OF THE TABLE DONOT OPERATE ANY MACHINE BEFORE UNDERSTANDING ITS MECHANISM AND KNOWING HOW TO STOP IT QUICKLY

9.

DONOT ATTEMPT TO LIFT HEAVY ,HOT OR ODD SHAPED OBJECTS THAT ARE DIFFICULT TO HANDLE ON YOUR OWN.

SREE VIDYANIKETHAN ENGINEERING COLLEGE


(Autonomous) Sree Sainath Nagar, Tirupati - 517102.

Department of Mechanical Engineering


MAUFACTURING TECHNOLOGY LAB OBJECTIVES

1. 2. 3. 4. 5.

6. 7. 8.

UNDERSTAND MECHANICAL PROPERTIES OF MATERIALS AND THEIR APPLICATIONS IN MANUFACTURING PROCESS. GAIN A KNOW-HOW OF TRADITIONAL MANUFACTURING METHODS STUDY AND LEARN MECHANISM AND SIGNIFICANCE OF POWDER METALLURGY AND ITS APPLICABILITY IN MANUFACTURING DOMAIN. ANALYZE AND UNDERSTAND THE MECHANISM OF DIFFERENT FORMING PROCESS. HELP THE STUDENTS ACQUIRE BASIC SKILLS IN VARIOUS WORKSHOP PRACTICES SO THAT THEY CAN HAVE SMOOTH TRANSITION TO THE REAL WORLD UNDERSTAND THE PROCESSING AND /OR MANUFACTURING TECHNIQUES OF METALS AND NON METALS UNDERSTAND THE DIFFERENT STEPS IN CASTING METHODS TO EXPOSE TO THE STUDENTS THE DIFFERENT TECHNIQUES OF JOINING PROCESSES FOR METALS AND NON-METALS.

OUTCOMES
1. TO BE ABLE TO UNDERSTAND THE APPLICATION OF THE DIFFERENT CASTING AND WELDING TECHNIQUES, AND BE ABLE TO SELECT AN APPROPRIATE TECHNIQUE ACCORDING TO A SPECIFIC REQUIREMENT. TO BE CONVERSANT WITH THE FOUNDARY PRACTICES AND TO APPRECIATE THE EFFECT OF PROCESS PARAMETERS ON QUALITY OF CASTINGS. A DEPTH OF UNDERSTANDING IN APPLICATIONS OF MANUFACTURING TECHNOLOGY AND ENGINEERING, FROM PROCESSES TO PRODUCTION ENGINEERING THE COMPETENCIES APPROPRIATE TO ENTRY-LEVEL PROFESSIONALS IN ANALYSIS, PRODUCT & SYSTEM DESIGN, PRODUCT REALIZATION, TESTING, CONTINUOUS IMPROVEMENT AND VERIFICATION OF QUALITY CHARACTERISTICS. THE SCIENTIFIC, TECHNICAL, ANALYTICAL, STATISTICAL, COMPUTATIONAL, PROBLEM SOLVING AND HANDS-ON SKILLS NECESSARY FOR MECHANICAL AND MANUFACTURING ENGINEERING PRACTICE. PRACTICES SO THAT THEY CAN HAVE SMOOTH TRANSITION TO THE REAL WORLD

2. 3.

4.

5.

You might also like