VoiceUSB-TM2 Quick Start Guide

Thank you for purchasing our device! We hope it will satisfy your expectations and you will enjoy its particular features. Please, find few minutes to read the Quick Start Guide before starting the work. It will make the installation and usage of the device easier.

INTRODUCTION

connected to the device analogue phone. When the device is connected to PBX it emulates external line while being in Trunk mode. When the device is connected to PBX it allows phone calls to/from any number in PBX to GSM network and vice versa while being in Extension mode. VoiceUSB device can work as a GSM modem that can create pathway to Internet, exchange data using GPRS, CSD data bearers. It also gives a user exclusive possibility to change parameters of the device with ordinary telephone using VoiceUSB Service menu or with a connected PC with special VoiceUSB Configuration Tool software.

VoiceUSB device is created correspondingly to up-to-date telecommunications and electronic technologies. In Trunk mode VoiceUSB emulates the line. Phone calls in GSM network can be received with the

PACKAGE CONTENTS

VoiceUSB device is delivered to the client in cardboard box with all required supplements necessary for work. Package consists of: VoiceUSB device.
Cardboard box.

USB A USB mini B connection cable. AC/DC power supply adapter. CD with User Manual and drivers. External GSM antenna.
Note: the producer does not provide a SIM card among other items of the package, which is necessary for connection to GSM network! You can obtain a SIM card from your local GSM service provider!

If any of the components are missing, please contact the manufacturer representative or your local distributor.

HOW TO START?

When the VoiceUSB device is set to work, that is, SIM card inserted, antenna, phone, analog phone line or PC (depending on needs) and power supply are connected, the Power LED is lights on and Status LED starts blinking indicating, that the module is preparing for work. The initialization can take up to 20 seconds (it is recommended to wait). During that time, the module checks the SIM card, detects the appropriate GSM network and checks the working parameters. When initialization is done, the Status LED becomes constant. Note. If PIN code request is active on the SIM card, then Error LED starts blinking and phone signal is busy. That means that the module is waiting for the PIN code

VoiceUSB INSTALLATION AND CONFIGURATION

Note: Disconnect VoiceUSB from your PC before installing

VoiceUSB

software setup.
INSTALLATION Insert SIM card into VoiceUSB. Make sure the SIM card is inserted properly. Connect antenna and power supply. Insert CD into the CD-ROM. With the help of Installation Wizard, install the software and the drivers.

Step 1

Step 2

If you do not have the required information, you can get it from your GSM operator

Step 3 Step 4

Step6 Step5

Step7

VoiceUSB SERVICE MENU

VoiceUSB parameters can be changed with the help of ordinary phone. After turning the device on, wait until it gets ready to work. If needed, enter the PIN code.
`##1111# 1# 1# 0# ##1111# 1# 2# 0# ##1111# 2# <Country code># ##1111# 3# 1# 0# ##1111# 3# 2# 0# ##1111# 4# (2...6) # 0# ##1111# 5# <New 4 digit menu password> # ##1111# 6# 1# 0# ##1111# 6# 2# 0# ##1111# 6# 3# <New 4 digits PIN code># 0# ##1111# 7# 1# 0# ##1111# 7# 2# 0# ##1111# 7# 3# 0# ##1111# 8# 1# 0# ##1111# 8# 2# 0# ##1111# 8# 3# <Prefix># 0# ##1111# 9# 1# ##1111# 9# 2# Activate Extension mode Activate Trunk mode Coutry selection USB connection in Data mode USB connection in FAX mode Number dial interval Service menu password changing Manual PIN code entering Automatic PIN code entering PIN coe entering to memory Caller ID type disable FSK format DTMF format Number prefix blocking enable Number prefix blocking disable Prefix blocking entering Polarity reverse enable Polarity reverse disable

##1111# ##1111# ##1111# ##1111# ##1111# ##1111# ##1111# ##1111# ##1111# ##1111# ##1111# ##1111# ##1111# ##1111# ##1111# ##1111#

10# 10# 11# 12# 12# 12# 12# 13# 13# 13# 13# 14# 14# 14# 14# 99#

1# 0# 2# 0# <Level value># 1# 0# 2# 0# 3# (0 ... 9) # <Prefix> # 0# 4# (0 ... 9) # 0# 1# 0# 2# 0# 3# (0 ... 9) # <Number> # 0# 4# (0 ... 9) # 0# 1# 0# 2# 0# 3# (09) # Number # 0# 4# (09) # 0#

Minute notification on (1min.) Minute notification off DTMF sensitivity in Extension mode Prefix blocking inTrunk mode enable Prefix blocking inTrunk mode disable Prefix adding in Trunk mode Prefix deleting in Trunk mode Number blocking inTrunk Trunk mode enabled Number blocking inTrunk Trunk mode disabled Number adding to the list in Trunk mode Number deleting from the list in Trunk mode Allow numbers list in Extension mode enable Allow numbers list in Extension mode disable Add allowed numbers from the list in Extension mode Delete allowed numbers from the list in Extension mode Restore default settings

INDICATION

Status Power LED is on Status blinking Status on

Mode blinking Mode on On/Hook LED on Error LED blinking Error LED on

Description Power supply on Device is preparing for work Device is ready to work (GSM network is detected, general configurations are made) Device is connected to the Internet USB interface connected to the device Phone is picked up Device is awaiting for PIN code No SIM card or wrong PIN code

IMPORTANT This sign on the package means that all used electronic and electric equipment should be stored separately.

This sigh on the package means that it is necessary to read the Users Manual, which is on the CD, before you start using the device.

FINAL NOTES

For more detailed information about the device, please read the documentation which is found on the CD. If you encounter any problems using the device and you are not able to solve them yourself, please contact our technical support department by e-mail [email protected] We will be glad to help you.