WCSebookfull
WCSebookfull
WCSebookfull
Watercolour Secrets Tips & Techniques to Make Watercolour Painting Easier & More Enjoyable
Index of Lessons
Page 3 Page 9 Page 13 Page 20 Page 25 Page 31 Page 39 Page 42 Page 45 Page 59 Create Whatever You Want With Simple Shapes Keeping Things in Perspective Colour Mixing Without Tears Mixing Greys And Greens Paint A Simple Cloudy Sky Creating Believable Trees Basic Reflections Enhance Your Landscape With Simple Figures Putting It All Together Free Watercolour Videos To Accompany This E-book
Page [3]
Watercolour Secrets
SECTION 1
1. Using basic shapes to create any object, whether its a flower, a figure, animal or anything else isnt new. Its been used for hundreds of years. Breaking down an apparently complex object to a series of basic shapes makes it a whole lot easier to draw before you even have to think about adding paint!
2. I just use five basic shapes circle, square, oblong, oval and triangle, as (A) above. You can see how you can easily manipulate these shapes (B) below, by stretching or compressing them to suit your subject. And dont think you have to draw your basic shapes as neatly as Ive achieved with these computer images. All thats necessary is something like my (very!) rough outlines (C) further down. These rough shapes are what I used in all of the Watercolour Secrets DVD Course lessons to create the subject matter I happened to be working on....
WATERCOLOUR SECRETS TIP: Ive deliberately drawn many guidelines throughout this short-course a lot heavier than they need to be, like the ones above. This is so you can see them easier. However, I recommend you keep your own guidelines as light as possible just enough to be able to see them. Then, when you come to erase them having drawn your finished item, theyll be much easier to erase and this is less likely to damage your paper.
3. Here, you can see how, just by using triangles and ovals stretched in different ways, you can produce the ideal shape for two completely different flowers.
4. First you have the foxglove (left) with its long, distinctive trumpet shape and then below that, the tulip with its equally well known... erm... tulip shape! 5. These shapes Ive shown as dotted lines give you the perfect basis of scaffolding to go on and draw more realistic outlines (bottom of page) , with all of the added the confidence that gives you, that youve caught the right shapes, ready for painting. 6. And dont forget, you dont have to produce a detailed drawing - you only need an outline if youre going to add paint. In fact, as a general rule with watercolours, the less pencil marks the better, as too many can make things look cluttered and scruffy. The outlines, on the left are more than enough to give you an accurate basis for adding your paint.
7. We can move this idea on easily to produce the same outcome for what might appear to be more complex subjects - but really arent if you take it one step at a time. Animals are a case in point. See how Ive put shapes round the main parts of the Kangaroo in the right hand photo. Take the photo away (below) and see how the red scaffolding already looks like a pretty good representation of the animal.
8. The beauty of this approach is that you can use whatever shapes suit you. You dont have to use the same ones Ive shown - you could, for example, use various sizes of long ovals for the legs and an oblong for the face. 9. Remember, simple shapes are merely a means to get your basic outline correct - and its much easier to erase and re-do a basic shape thats wrong, rather than rubbing out a detailed part of the body that youve laboured over for an hour, knowing all the time deep down thats it just not going right....!
10. In this next picture (right), Ive started to outline the more realistic shape of the Kangaroo. The red guidelines have been paled off so this shows more clearly. Ive also inked in the shape so it shows up better. Normally I would be doing this bit in pencil. You can see from the pale red lines that I havent tried to follow them very closely in certain areas around the head and the top of the Kangaroos back, for example. So always bear in mind these are only guidelines to help you to place features in the right position and correctly proportioned. If you get the guidelines wrong first time, simply rub them out and re-do them!
11. Now if I was just going to produce a pencil or ink drawing, the fully shaded sketch on the right is what I would produce. I could add some light washes of paint over this provided Id used waterproof ink so it wouldnt smudge. 12. However if this was going to be part of a conventional watercolour painting, I wouldnt put in this amount of detail just a basic, lightly- sketched or traced outline on my watercolour paper.
WATERCOLOUR SECRETS TIP: Heres the demonstration sketch I produced in one of the lessons in the Watercolour Secrets DVD Course. However, dont try to draw this, complete with all the guidelines that will need erasing, directly onto your Watercolour paper. The outline was developed exactly as Ive described, but on cheap copy paper and then I traced it onto Watercolour paper to ensure I was painting over a clean image on an undamaged painting surface. See next page for how to do this.
Watercolour Paper
1. Ive mentioned several times in this tutorial about tracing down from a rough sketch to your watercolour paper. 2. There are two main ways to do this. First, as in the photo on the left, you can buy special graphite tracing paper.
Graphite Paper
3. This is used exactly as you would use carbon paper, i.e. you put it, graphite side down, between the original rough drawing and the watercolour paper. 4. Then draw lightly over the outline of your original sketch and the image is transferred onto the watercolour paper to give you a clean, tidy image to paint on without damaging the painting surface.
Rough Sketch
5. The second way is slightly messier but much cheaper. Here on the left below we have our rough sketch of a bison. Turn the sheet over and take a fairly soft pencil such as a 2B and scribble on the back of your rough sketch as in the right hand picture. Theres no need to scribble all over the sketch - just the parts where you have drawn any lines. If you look carefully, you can just see the image showing through from the other side of the sheet here.
Rough Drawing
Reverse Side
6. Now place the sketch the right way round on your watercolour paper and draw over it as described when using the trace-down paper above. Either method should transfer a good enough image that will allow you to paint. Dont press too hard when tracing over your sketch as it will put grooves into your watercolour paper which may fill in with paint and cause an unwanted outline.
Watercolour Secrets
SECTION 2
VP
Horizon or eye-
VP
1. Perspective is the way that you draw a picture so that you create the illusion of a foreground, middle ground and the distance. Objects appear to get smaller as they get further away but they also change shape slightly, depending on the height or angle that youre viewing them. 2. Always try to draw (or imagine) a horizon line (or eye-line) in your picture. Draw it lightly as you may want to erase it later when everything is drawn in the right place. Its called the eye-line because it is always the same height as the height of your eyes from ground level as if you are looking straight ahead. 3. Look at the two pictures (right). In A the horizon (eye-line) has been drawn about of the way up the picture. See how your view of the scene automatically rises up in the air to follow the eye-line - you appear to be looking down on the scene about several feet above the figure, as if from an upstairs window.
A
Horizon or eye-line
4. In B by drawing my eye-line near the bottom of the sheet, my view has also dropped right down as if Im sitting on the floor. In A you see much more of the red S-shaped road than in B. But notice that where the road runs directly away from you on the bends (eg: immediately to the right of the figure in B) you see its full width, as opposed to the foreshortened width as it veers backwards and forwards across the picture. The figure in B also rises quite a bit above the horizon because hes in the foreground and youre viewing the scene from a low position.
5. Now look at the pictures left and below of a more realistic beachside scene. See how the principles work exactly as described above. In Picture 1, because the horizon line is much higher, you can see more of the sea and more inside the boat than in picture 2 where your eye-line is below the half-way point of the picture. And note how the visible sea area has been compressed in picture 2 to less than half the area in picture 1, yet both pictures look in the correct perspective.
6. These diagrams explain how just by altering the horizon line (your eye-line) you can change the perspective of a building very simply indeed. Ive added some dotted perspective lines on which sit the horizontal lines of the door, roof and windows. You can draw these with a ruler to use as guidelines. Draw lightly so you can erase them later. 7. The VP to the left and right is a theoretical Vanishing Point where these lines appear to converge. They dont of course, but they do give you a convenient point from which to start your lines. Imagine them as spokes on a bicycle wheel radiating from the VP. You can add as many of these lines as you wish to help you get the perspective of doors, windows and roof-lines correct. If you use these guide lines in the way Ive described youll never get your perspective wrong again. By the way, notice in the Red house that Ive used the green eye-line as one of the perspective lines. You dont have to, but in this case it was a convenient line on which to sit the bottom of the windows.
VP
Horizon or eye-line
VP
8. Youll also notice with the Red House that some of the red lines fall below the eye-line and some rise above it. In the Red House, the eye-line is about your normal standing height - in other words, about of the way up the door. As a result, you are looking down at the parts of the building below the eye-line and up at the rest of the building above it. Therefore the simple rule is that any perspective lines drawn above the eye-line will rise up and any drawn below, will move down. Now that we know this rule, its easy to adjust the view we have of a building. 9. In the Blue house, to get this view of being above it or certainly at roof level - the roof is placed along the eye-line and so all the other perspective lines have to be drawn downwards and below it. Automatically, your view rises up as if youre looking at the Blue house from an upstairs window.... VP
Horizon or eye-line
VP
10. In the Green house, weve drawn the horizon line along the bottom of the building so all the perspective lines have had to be drawn above it some quite steeply as we get up to roof level. VP
Horizon or eye-line
VP
11. This now gives us the opposite view to the Blue house. Here, its as if we are lying down on the floor, looking up at the building. If youve ever come home worse the wear for drink, this may be a familiar view....
Page [12]
1. Now what about other features such as looking at things slightly side-on? Well, lets look at an arched bridge over a river. Once again, that eye-line is the key. 2. Look at these three outwardly similar sketches. In A the view is as if youre sitting in a boat in the exact centre of the river, looking straight through the arches. Your eye line, marked with the red dotted line, is therefore very low down.
Eye-Line
3. Notice also how the river banks, marked by the dark dotted lines, are drawn at a very shallow angle to the eye-line, which emphasises that your view is right down at water level. You also see a little of the inside of both arches - but the opposite sides of each one - because youre looking at them straight on from the centre of the river.
B
Eye-Line
4. In sketch B (left) see how Ive set my eye-line towards the top of the arches by drawing the river banks at a steeper angle than in the first sketch. Right away, my view of the river is several feet above it. 5. Ive also painted just the right hand side of the arches which now pushes my higher view away from the middle of the river and to the left of the bridge.
Eye-Line
6. In sketch C above, Ive drawn the river banks even steeper and this time, added the inner arches on the left side. My view therefore goes off to the right and is high enough now to include the far wall of the bridge. Note also with all three sketches we can see all of the underside of the arches in the reflections in the water because were viewing the reflections from a different angle than the bridge itself. Well look at that in a little more detail later on. 7. Finally, on the left Ive put all the sketches together so you can see how easy it is, just by altering the angle of a few lines here and there, to change your viewpoint up, down and sideways at will.
Watercolour Secrets
SECTION 3
1. Lets get the most basic (and for many, the most boring) part of colour mixing theory out of the way. Hundreds of books and thousands of articles have been written about colour theory, but Im going to deal with the absolute basics on this one A4 page and much of that will be taken up by the photos! 2. There are three primary colours - red, blue and yellow. These are called primary colours because you cant mix any other colours to create them. You may well have heard of a colour wheel, complementary colours and colours being placed on opposite sides of the colour wheel - which all sounds a bit technical, but is really very simple.
3. Have a look at the colour wheel on the right. It contains six colours - the three primaries of red, blue and yellow - and three secondary colours; purple, orange and green. They are called secondary colours because they are created by mixing two primary colours - red and blue for purple; red and yellow for orange; blue and yellow for green. 4. You can see that the secondary colours have been placed on the wheel between the two primaries that created them. On the opposite side of the colour wheel to each secondary colour is a primary colour its complementary colour. So red is opposite to and the complementary colour of green, blue the complementary of orange and yellow the complementary of purple. This is explained more fully (but just as simply) in the Watercolour Secrets DVD Course and you can go into a lot more detail if you want, but the basic principle is no more complicated than that.
Green created from Yellow & Blue
Complementary Colours
5. One of the benefits of placing a primary colour and its complementary colour next to each other is that they both make each other look much more vibrant. However, if you mix them together, you create a dull grey or brown. This happens because by mixing them together, effectively youre then mixing the three primaries of red, blue and yellow. However, well see later on how you can exploit this situation by mixing a wide range of your own greys and blacks. 6. Remember that for centuries, artists have placed complementary colours next to each other in their paintings to create a subtle vibrancy and brilliance. And when they want to tone down a colour, theyve done so with a touch of its complementary colour, which gives much more harmonious and satisfying shade, rather than adding black, which can all too easily kill a colour (and a picture) stone dead. Have a look above at the complementary colours of yellow and purple. Placed next to each other, theyre vibrant and bright. Mixed together, as on the right theyre anything but....
1. One of the most frustrating problems the aspiring watercolourist faces is how to control the way watercolour paint spreads at times in a most frustrating and unpredictable way. 2. Dont worry, its not nearly as difficult as you think and in fact, Watercolour paints are the province of many happy accidents where the paint produces a wonderful effect that you never envisaged, but which you happily take the credit for - especially when its later admired by others....! 3. Probably the two biggest reasons for success - or failure in Watercolour painting are paint strength and timing. By paint strength we simply mean how much or how little water is in the paint mix. By timing, its down to when you add a layer of paint to damp paper or one that already has a moist coat of paint on it. So lets look at how these can be manipulated to your advantage in these two examples taken from the Watercolour Secrets DVD Course.
4. Both the pictures have a base colour of medium strength Raw Sienna. In each case the paper was placed on a sloping drawing board so the paint would run down from top to bottom. 5. In the top picture, while the Raw Sienna was still very wet, I put on a strong mix of Ultramarine and Light Red. See how this strong mix has run uncontrollably, has been diluted by the wet Raw Sienna and in fact has almost disappeared, creating an elephants head shape as its run down the page (happy accident ?!!) 6. However, the left hand picture was left for the Raw Sienna to dry for about 90 seconds to just damp before the Blue/Red mix was added. Its still spread slightly, but Ive been able to control this far more readily and the paint has stayed much nearer its original intensity.
7. Now, moving on to colour-mixing, the next Watercolour Secret is to understand the importance of the strength of colour you use. In the top picture Ive made three mixes of Light Red. The left-hand well has 3 brushloads of water and one of paint; the centre well, three of water and two of paint and the far one, three of each. 8. The lower picture shows what these colours look like once they have dried on your paper. See how much lighter theyve gone than the liquid versions in the palette. In fact Id regard even the strongest on the right to be only a midtone - so you can see just how bold you can afford to be with the strength of paint you mix!
1. Now watercolours dry around 50% lighter than when theyre put on wet. But what does this 50% look like? Well, heres a good example where you often end up with a sky thats too watery and insipid. In the picture Ive painted four panels. In A Wet this is the strength of paint that most newcomers put on their sky. Because its quite strong and a medium blue when its wet, it looks right. 2. However, in the lower panel this is how it dries, pale and washed out - with little chance of lifting out clouds that will actually show up! 3. In B Wet this is what your paint should look like when it first goes on the paper. It may look too strong when you put it on, but see how much it lightens in the panel below it. 4. And note how in B Dry the colour is as dark as the original wet wash that was put down in the top left panel....
A
Wet
B
Wet
A
Dry
B
Dry
5. Now, the next big step is learning to put one colour on top of another thats still damp, without causing those awful run-backs and cauliflowers that are the curse of the newcomer (and not-sonewcomer!) to watercolours. 6. Lets have a look first at how to create a cauliflower. This will really help because once you understand how and why it happens, its easy to avoid in the future. Well look again at a sky because thats where it most often happens in a picture and usually in the most prominent place! 7. Without getting too technical, the problem arises when you try to put a watery wash on top of a still damp layer. The water in this second wash lifts the pigment already on the paper and pushes it to one side. When the watery wash finally settles into the paper, so does the displaced pigment, giving you the classic tide mark and cauliflower outline in your sky. 8. You can see in the top picture how, instead of adding a thin wash, the brush looks like its starting to lift paint off. Whats happening is that the water on the brush is being sucked onto the damp paper by capillary action and this water is starting to push the pigment already there to one side. 9. In the lower photo Ive left the picture untouched for only about three minutes and you can see how much damage has been done as the watery wash has spread out before its started to dry. Never mind, lets look at the easy solution in the following pages.
1. Look again at the examples I showed in Stage 1 of this tutorial. Even though the paint has run in the far image because I put it on when the Raw Sienna layer was too wet, it hasnt gone into a cauliflower because I used a strong mix of the darker colour, i.e. stronger than the Raw Sienna that was already on the paper....There was enough pigment in that second mix to stop the water running amok and creating a run-back.
2. On the right, you can see how strong the paint actually had to be. In the closeup of the palette you can see the dark, wet paint that was used from the righthand well, as opposed to the same mix but with too much water in the other one. Underneath that picture is what the colours look like, when theyve dried out on dry paper.
3. So, the solution is very straight-forward. To avoid cauliflowers in the future, you need to make sure that any layer of paint you add is stronger than the one thats already on the paper and still wet - in other words, it has more pigment in it than the preceding layer.
4. And of course, dont forget timing. Look at these two pictures of a Raw Sienna wash, taken about 90 seconds apart. The top one has picked up a shiny reflection from the camera flash whereas the lower one has a much more muted highlight usually, the ideal point to add your next layer of paint....
WATERCOLOUR SECRETS TIP: If youre not sure of the difference between shiny and sheen think of the surface of a gloss-painted bedroom door and one with a satin finish.
5. Adopting this idea in a practical sense, and using the strong mix from the palette pictured on the previous page, see how we can confidently place some warm grey clouds over the damp Raw Sienna wash to create the basis of a lovely evening sky! 6. But look also how that dark wash has already diluted with the water in the paper! However, its only spread a little and its much easier to control where you want it to go because weve let the base colour go to that damp sheen.... 7. In the close-up right, Ive now touched in some almost neat Ultramarine Blue to give some strength and variation in the cloud colour. You only need to touch the paper here and there with the paint it will run off the brush onto the paper. Then let it spread its own way. And see how the left side of the cloud has also started to dry, creating a nice mixture of hard and soft-edged effects another happy accident!
8. To finish off this little exercise, I put in a few jagged streaks for more distant clouds. By the time these were added, the underlying Raw Sienna wash was almost dry. You can tell this from the relatively hard edges of these smaller clouds. However, now I was able to use paler, more watery paint to create these clouds without problems as it cant push dried paint around as easily as wet paint....
9. So get your colour strength right, watch your timing and when you tackle the main Skies tutorial, youll be able to confidently produce those cloud shadows without fear of the dreaded cauliflower!
Watercolour Secrets
SECTION 4
Ultramarine
Light Red
Ultramarine
Burnt Umber
Pthalo
Light Red
Pthalo
Burnt Umber
3. Look at this simple colour chart using just two blues and two reds/browns. Theyve been mixed with each other in different proportions to create a range of greys that will cover many situations. Ive started with one brushful of blue on the left then added one, then two, then three brushfuls of red/brown, finishing with the neat red/brown on the right. You can easily see how you could vary these mixes much more by adjusting the proportions and/or by making them stronger or more watery. Literally dozens of greys will then emerge. 4. If you go on to use different blues, browns and reds - Cerulean Blue, Cobalt Blue, Raw Umber, Sepia and Cadmium Red for example - then the options are almost limitless. Remember, blue and red dont necessarily make purple. If the red naturally has some yellow in it, such as Cadmium Red, then mixed with say, Pthalo Blue, you will get a definite grey. However, youre then on the way to understanding how and why greys are created, which means its much easier to avoid producing them as unwanted mud in your next picture!
5. You can also mix a whole variety of subtle blacks using the same method. Black is, after all, nothing more than a very strong grey! Just make sure you use very strong paint and relatively little water to get the depth of colour you want. 6. In the left hand picture below Ive mixed three primary colours - red blue and yellow - with very little water added and you can see that they create an excellent black (more money saved)! These happen to be Ultramarine, Yellow Ochre and Permanent Rose, but you can achieve similar results with virtually any three primaries. Add water and a useful tonal range of that grey appears as in the right hand picture.
7. On the right here, by adjusting the proportion of each of these primaries in turn, you can very easily create a grey/black thats biased towards blue, red or yellow far more useful and vibrant that most black paint straight out of the tube.
1. Now lets look at greens. With just the two blues and two yellows, a whole range of greens to suit all seasons is available. In the chart below is just a small selection. 2. As with the greys, Ive started out on the left with a blue and then added additional brushfuls of yellow until Im left with the pure yellow on the right. 3. By producing this sort of simple chart and noting how much of each colour youve used, you can always reproduce the same colour on demand.
Ultramarine
Yellow Ochre
Ultramarine
Lemon Yellow
Pthalo
Yellow Ochre
Pthalo
Lemon Yellow
4. And once again, notice how some combinations of blue and yellow produce a grey rather than green. The mix circled on the top line is a case in point. This happens because Ultramarine Blue has a touch of red in its make up, so adding a little Yellow Ochre to it effectively mixes those three primary colours together. And we saw what happens when you mix three primaries on the previous sheet....
5. Now a quick word about Viridian Green, which appears in many starter paint sets. Viridian is a vibrant pre-mixed, blue - green that a lot of people have problems with because it can be so overpowering. Theres nothing wrong with it and its great if you use it for certain types of sea colour or as a mixer with other colours. Personally, I dont recommend it for beginners though because you can mix so many alternative greens the way Ive previously described. 6. If you do use it, try adding another colour to tone it down. In the picture A on the left Ive added a little Raw Sienna. Because that has a touch of red in it (the complementary colour of green) it naturally reduces some of the intensity of the pure Viridian colour. 7. If you prefer to use a pre-mixed green as a base for your foliage, try Sap Green (picture B) or Hookers Green. These will provide a good solid tree/grass colour without overpowering the rest of your painting.
8. Finally, remember, if you want to tone down a colour because its too bright - in this case Viridian - dont use black! Instead, use its complementary colour (for green its red). Here you can see on the left, a block of un-retouched Viridian. In the centre block Ive added a small amount of Cadmium Red and in the right hand block, some more red. If you add enough of the complementary colour you also achieve another range of greys. 9. Using complementary colours like this will generate much more harmony in your paintings and its a subject we look at in some detail in the Watercolour Secrets DVD Course . Once you get used to the concept, youll wonder how any previous painting succeeded, yet its so easy to understand once youre aware of it.
Watercolour Secrets
SECTION 5
You need:Round Brush No.10 Ultramarine Blue Yellow Ochre (or Raw Sienna) Permanent Rose Bockingford 140lb (300gsm) Paper Kitchen towel Drawing Board
Yellow Ochre
Raw Sienna
Ultra. Blue
Perm. Rose
1. Tape your paper to the board and rest the top of the board so its on a slope. A book or short length of wood about 2 thick (50mm) placed under the board at the top is ideal, as in the diagram below. This makes the water and paint run slowly down the paper, helping you to achieve an even wash for your sky.
2. With your No.10 brush, quickly wet the whole of the paper. It needs to be fairly damp, but not flooded. 3. Any excess water that runs to the bottom of the paper can be lifted off with a clean brush or kitchen towel. You can see from where the flash has reflected that this paper is too wet at present to add any new layers of paint. Leave it for another 60-90 seconds.
WATERCOLOUR SECRETS TIP: Yellow Ochre and Raw Sienna are very similar. Yellow Ochre is a bit more opaque, while Raw Sienna has just a touch more red in it. Either one is fine to use.
Paint
4. With your No.10 brush put some pale streaks of Yellow Ochre (or Raw Sienna) across the bottom of the sky. In a full painting you would have a landscape at the bottom of the page. In that case the yellow ochre streaks would go just above the horizon line. 5. These streaks will dry out very pale eventually but give warmth to the sky, especially just above the horizon.
6. The finished sky should take no more than four or five minutes or it will start to dry out while youre in the middle of it and cause you problems. So lets move quickly onto Stage 2 before your paper does dry out!
7. Paint a strong mix of Ultramarine Blue in a horizontal streak right across the top of the damp paper. Do this stronger than you think as it will dry back much lighter even more so as the paper is already wet.
8. Now swill your brush in clean water and put it into your blue paint mix. This will dilute the mix and with a good brush-load of this lighter paint, add a second streak below the first right across the paper again. Im doing this left to right as Im left-handed. Right-handed artists will probably go right to left.
9. Let the brush touch the base of the streak above as you do this and see how it drags the paint from the streak above evenly down the paper....
....and keep repeating this until youre about 2/3 of the way down the paper.... 10. You should see the sky lightening steadily as you progress down the page. By the time youre near the Yellow Ochre streaks there should be very little blue paint on your brush look at this bottom photo to see what I mean. See how the blue at the top has already lightened considerably after a minute or two. Also, notice the silky sheen on the damp paper not a high gloss which would mean it was still too wet....
11. You can leave the sky as it is at this point and it will provide a perfect, cloudless summer sky if you want it to. However, were going to take it on a couple of stages further to add some very simple clouds and cloud shadows. So lets move on to the next stage....
12. Now heres the fun bit. Use a clean, damp brush, rolling it randomly across the top of the sky. Or you can use kitchen towel. Try to have some idea of where you want your clouds, but dont go mad and overdo it! Ive used a flat brush here but it doesnt matter as long as the brush is fairly large. A large round will be just as good. See also how having the strong blue colour to start with allows the white clouds to stand out.
14. Using the kitchen towel as in the bottom photo here will give you a slightly different effect. Dampened paper towel will give a soft cloud edge more like the brush, while a dry towel will give a more sharply defined edge to the cloud. Keep turning the towel to a clean area so you dont put paint back in the sky. Try all these methods to see which works best for you.
13. Keep lifting the brush off the paper and swilling it in clean water then partially dry it on kitchen towel. This will avoid you putting the blue paint youve just lifted out, back into another part of the sky.
15. Note how Ive kept the clouds simple, varied in size and linked together. Do avoid putting several identical, separate clouds of exactly the same shape in the sky. Nothing looks worse than these balls of cotton-wool floating in mid-air.
WATERCOLOUR SECRETS TIP: Always have one cloud as the dominant one with other, smaller clouds as the supporting cast.
Again, you could stop at this point with these gentle, wispy clouds, but lets move on and add some cloud shadows....
Ultramarine Blue
Permanent Rose
Yellow Ochre
16. Mix 50% Ultramarine Blue plus 50% Permanent Rose plus a little Yellow Ochre to grey things down a touch. This makes a great cloud shadow colour. Make it good and strong because the wet paper will dilute it more than you might think....
Note the required strength of paint to make your cloud shadow the right colour when its dried....
The mix in this well is far too weak, although its quite close to how the mix on the left should look when its dried on the paper...
17. Where is the sun coming from? In my picture its from the top left so I need to paint the shadows on the bottom right of the clouds.
18. By now, the paper should have dried a little so any remaining watery shine has been replaced by a dull sheen. This is the perfect time to add your shadow colour....
19. Dab in the shadow mix bottom right of your clouds. Keep the shapes random. Before these shapes dry, swill out your brush in clean water then partially dry it on kitchen towel so its just damp.
20. Now drag the clean, damp brush lightly over the edges of the cloud shadow, pulling out the colour to almost nothing. This creates random hard and softedged effects (also known as lost and found edges) as the brush is dragged into damp and dry areas. Use a light touch! With a little practice, you will surprise yourself how easy this
Hard Soft Edges
WATERCOLOUR SECRETS TIP: If the cloud shadow starts to dilute and disappear, dont panic! Let the paper dry to just damp then drop in a stronger touch of the shadow mix. Drop in just means you touch the damp paper lightly and let the paint run off the brush on to it by capillary action.
So there we have it in a few simple steps three skies for the price of one! On the left below, we have a clear, cloudless sky, then on the right, a sunny one with wispy clouds. Finally, in the big picture, weve put in those lovely cloud shadows for added interest. And if you want to see how easy it is to produce many other, different types of sky then youll find a host of sky tutorials in the Watercolour Secrets DVD Course . Believe me, with a little practice, it can take you less time to produce a successful sky than it takes to read through this tutorial. Go on - give it a go and amaze yourself!
Watercolour Secrets
SECTION 6
1. Before we get on to painting trees lets see how easy it is to sketch them.... Weve all played cards at sometime or other, so use the shape of the Ace of Clubs as a starting point see how just three circles and a triangle gives you the basis for your tree....
You Need:- Burnt Umber - Lemon Yellow - Ultramarine Blue - No.8 Round Brush - Rigger Brush - Bockingford 140lb (300gsm) Paper - Drawing Board - Pencil & Eraser Some of the mixes well use with these colours are shown here.
2. Now draw the Ace of clubs again, but alter the size and shape of each of the circles, as here. And lengthen the trunk slightly. See how a tree
3. Ive put some red circles and lines over this sketch to show how simple it to use them as scaffolding for your tree. Its very easy then to draw a rough outline to get the shape you want....
4. Here, Ive taken away the circles to leave us with the outline of a believable summer tree. You can easily adjust the shape to make it taller, shorter, fatter or thinner. Ive added some simple Y shapes to represent the branches appearing here and there amongst the leaves.
5. To do the same for a bare winter tree is even easier. All you need is to create the trunk and a rough canopy which acts as a guideline where the smaller branches and twigs will finish. When youve added paint to either of these trees, you can rub out the guidelines if you want.
6. Now you know how easy it is to sketch some simple trees, lets move on to the next stage and add paint to bring them to life!
7. Look again at the colours were using they work for both the winter and summer trees. The middle row gives us the three shades of green for the summer tree - Lemon Yellow with first one spot of Blue, then two spots and finally two spots of Blue and one of Brown. Below that on the bottom line is an equal mix of Blue and Brown for the trunk and branches. 8. Make your colours about the same strength as the cloud shadow mix in the sky tutorial. Most of the tree will be painted while previous layers are still damp, so make sure you mix all your colours first and mix more than you think youll need!
9. With the lightest colour mix, Im scraping the paint downwards with the side of the brush to create a slightly ragged effect. Ill paint 4 or 5 rough banana shapes to represent the leaf clusters.
10. While the previous layer is still slightly damp, Im touching in the medium green at the bottom of each leaf cluster to give some shadow. Make this green slightly stronger than the previous coat. See how it gives a nice three dimensional effect. Even at this stage, you can already visualise the tree....
Sun
11. With a slightly stronger mix, dab in the darkest colour, again while the previous layers are just a little damp. This will really enhance the 3D effect youre trying to create. Decide where the sun is coming from (in this case, top right) and touch in the dark colour on the opposite side of the tree, underneath and in the centre, which would be the darkest areas....
12. Now lets move quickly on to adding the trunk and branches!
13. Use the Rigger for the branches and twigs in the centre of the tree. A strong mix of 50% Blue and 50% Burnt Umber gives a lovely dark grey/brown which will allow us to take some highlights out later. 14. See how simple it is to paint branches in the gaps between the foliage. The stilldamp tree colour allows these branches to blend nicely into the leaf clusters. 15. Notice in the close-up below how Im letting the rigger drag over the paper surface to produce a raggedy line ideal to represent uneven, thin branches.
4. Now back to the No. 8 Brush for the trunk. Start from the ground and work upwards, as it would grow. If you paint any large branches leaving the trunk just below the bottom of the leaf masses, make sure these roughly line up with the branches in amongst the foliage....
WATERCOLOUR SECRETS TIP: Observe carefully how wide tree trunks are in relation to the tree size. Invariably theyre thicker than you think remember how much weight theyve got to support....!
....Nearly there for the summer tree. Lets go to the next stage to complete it!
1. Having completed the trunk, but while its still damp, Ive added in a medium mix of green to create the field in which the tree is sitting. This stops the tree looking like its floating in mid-air. 2. You can see Im letting the colours blend together here. See how this makes the tree look like its growing out of the ground instead of just sitting on the top of it.
3. Having let the trunk dry, Ive slightly dampened the right side with clean water. Then Ive folded a paper towel and with the edge Ive dabbed it on the damp area. Or you could use the chisel edge of a small, flat brush 4. This lifts off some of the paint, giving a gentle highlight as if cast by the sun. If you want to, gently blend the light and dark areas with a damp brush for a more gentle transition. Ive also done the same on one or two of the larger branches.
Sun
5. As a final touch, Ive added some of the dark foliage mix, wet-in-wet, to the ground underneath the tree to create strong shadows. Incidentally, what looks like pale blue is actually the wet paint reflecting the camera flash. 6. As most of this exercise has been done while previous layers were still damp, you can see the importance of mixing plenty of colour before you start to paint....
Cast Shadows
WATERCOLOUR SECRETS TIP: When adding ground shadow underneath trees, make sure you put some on the sunny side that will be cast by the branches and foliage on that side of the tree, as well as on the obvious shadow side in this case, on the left....
Now lets move on to do the same tree but this time, in winter....
1. The winter tree trunk and thicker, lower limbs are painted in the same colours and in the same way as the summer version, using the No.8 Round Brush. Keep using the No. 8 brush for as long as you can. Move onto the rigger only when youre painting the thinner branches and twigs.
2. Dont forget to paint one or two large roots at the base. These will be blended into the ground colour later, so the tree looks like its growing out of the ground and not just sitting on top of it.
3. Always start by painting trees from the ground up the same way they grow. This will ensure that branches naturally become thinner as the brush travels upwards and starts to lift off the paper slightly. 4. Youll also find that as the paint starts to run out, the upper branches will lighten. Then, when you recharge your brush with paint, youll get a nice mix of light and dark branches in your tree, adding greater interest....
WATERCOLOUR SECRETS TIP: Its always easier to paint the branches on the same side of the tree as the hand you use to paint. Im left-handed so branches on the left side of trees are easier for me. If youre righthanded the opposite applies. The answer is simple. Turn your picture upside down when you paint the branches on your wrong side and just paint in your natural direction.
1. As with the summer tree, you can now take out some highlights from the trunk and main branches. In fact this is probably more important on the winter tree as these will be more visible. 2. To create a less defined highlight from a wintry sun scrub the No.8 brush gently to lift out colour from trunk once its dry. Dont worry of you overdo it, just add some darker paint on the shadow side and it will blend back nicely to give a subtle light and shade. 3. Although it looks like Ive added pale blue to the trunk its actually the reflection of the wet paint. However, you can see how effective a touch of blue can look if you did decide to add it....!
4. In the next picture (below) Ive added some of the mid-green from the summer tree for the ground colour, letting the trunk blend into it. Ive also put a streak of the same colour on the trunk to create a touch of moss on the bark.
5. You can stop at this stage if you want. If you prefer to add an impression of feathery twigs, use a paler version of the trunk colour, having first partially dried off your brush on some kitchen towel. 6. Simply scrape colour over the tree, using the paper surface to create hit and miss effects. 7. Drag the side of the brush inwards from the edge of the canopy towards the centre of the tree or downwards on a lower protruding branch and dont forget to add colour in the centre of the tree as well. Remember, its a three-dimensional object and you would have branches coming towards you.
So there we are three for the price of one again! First, we have a bare, winter tree. Then, on the right we have the same tree with a canopy of dead leaves. Finally, below, we see one in all its summer glory. Simple to produce, they give immense satisfaction in creating a believable tree, whether its on its own like these, or part of a full-blown landscape. Go on give it a go!
Watercolour Secrets
SECTION 7
BASIC REFLECTIONS
1. Putting reflections in water is really easy once you understand a few general principles. These arent arty rules like good composition or choosing a focal point, which are often based on opinion, but simple laws of nature about where reflections do - and dont -occur. Look at the little scene below. Its a still from the Watercolour Secrets DVD Course showing 8 of the most common reflections youll need to deal with in your landscape painting. Imagine youre sitting in a rowing boat on a lake or very still river so your eye- level is only about the height of the bank. Youll note that Ive added the reflection of the river bank to start with. Now lets look at each one in turn.
E A
F B
2. In A and B we have the simplest situation of a post in still water and then in slightly rippled water. Notice two things. The reflections are always vertically below the object reflected and the reflection is always lighter with a dark object and darker than a light object being reflected. In other words, the tonal contrast (light to dark) of a reflection is always slightly duller than the item its reflecting.
3. Ive represented this lesser tonal contrast by making the reflections grey rather than the light brown of the posts themselves.
4. In C (above right) we have the reflection that catches out so many people. Have a look at the sketches lower right to see the placing of two typically incorrect reflections. 5. In sketch C, the reflection is conforming to the vertically below rule. Look at the dotted lines Ive added from those three marks on the post. Each one drops vertically to place that part of the reflection in the appropriate position.
1. This is a simple and effective technique in D to represent water thats a bit more ruffled and windblown. It works particularly well using a Rigger brush to create reflections of long, thin stalks and reeds. 2. All that is necessary is to quickly and lightly paint two overlapping wavy lines that more or less match. But dont try to get them to match exactly or the effect will look contrived.
3. In the two examples below, we have posts in which E leans towards you and F leans away from you. Remember, your view of all these reflections is from that rowing boat sitting in the water. So what you have now are reflections that are different in length from what you can see of the posts. 4. So with the post that leans towards you over the water (E) you only see a foreshortened view of it, but the whole length of its reflection. This happens because from your viewpoint, you see the reflections at a different angle to the actual posts. You are looking slightly upwards at the posts, but slightly downwards at the reflections. 5. With post F, the opposite happens. You can see a fair amount of the post, but because it leans back away from the bank, this time the reflection is much reduced in length.
6. Heres another area which confuses many students. Remember, reflections are always seen vertically below the object being reflected. This never changes. However, a shadow does. It moves and lengthens depending on the position of the sun.
7. So if you have, as in this case, a post near to the waters edge, deal with the shadow in the normal way. You can also have a hint of the shadow falling on the water as well if the shadow is long enough. Then put in your reflection - vertically - as Ive already described in the other examples.
H
9. Ive put a red dotted line from where the churchs reflection theoretically starts but of course, from your view-point in your rowing boat, not much more than the steeple will show up in the water. 10. Finally, have you noticed that weve effectively created the illusion of water merely by adding reflections? At no time have we needed to actually paint the water itself....
8. Finally, when you put in a reflection of an object (in this case a church) which is some distance from the water, how much reflection should show? Its quite simple. You should imagine the reflection starting from the base of the church where it sits on the ground. In this example, its beyond a rise in the ground perhaps a few hundred yards from the water.
Watercolour Secrets
SECTION 8
1. Lets have a look now at some basic figures, which youll often need to either humanise or add scale to an otherwise empty landscape. 2. Now then, how difficult is it to draw this triangle and an oval for the body and a head and then a couple of lines for the arms? Immediately, you have the authentic outline of a figure walking either towards you or away from you. Well see how easy it is to choose the direction on the next page.
3. Now draw two of exactly the same figures, one slightly smaller, but angled towards each other. Weve now got a couple engrossed in conversation.
4. Taking this a stage further, Ive bent the triangles together so the couple are arm in arm. See the degree of intimacy this achieves with such a simple adjustment of the lines. 5. Ive also added an impression of a little dog with a couple of overlapping ovals, a triangle and some lines for the legs and tail. 6. See how the gently curved lead tells you that the dog isnt tugging at it, adding to the relaxed, leisurely atmosphere weve created....
7. Here, weve produced a seated figure with no more effort than adding two scalene triangles for the upper and lower parts of the legs. (A scalene triangle is one that has no equal sides or angles. See, you get lots more than just free painting lessons here...!) 8. Note how the head is drawn a little above the body to represent the neck and the elbows almost reach down to the waist when a figure is seated. In general, a good guide to drawing adult figures is to make them about 7 8 heads tall. Small children are about 4 5 heads tall, while a babys head is about a quarter of its total size. 9. By the way, if you look closely at this figure, youll see some ghosted images where Ive rubbed out lines drawn in the wrong place. This illustrates perfectly why youre better off drawing this sort of figure on rough paper before transferring it to your watercolour paper....
1. The more action you create in a figure - a man running as in this photo for example - the more likely it is to draw attention to itself in your picture. In that case, it almost certainly needs to be the focal point (or part of it) or it will start to compete for attention with what actually is your chosen focal point.
2. A more passive pose such as a couple strolling down a country lane may be a better option if you just want to focus on the landscape scene, where their presence complements, rather than dominates it. 3. You can of course still use them as the focal point by painting them in strong, bright colours. All the painted figures on this page were created in various lessons in the Watercolour Secrets DVD Course and are ideal for this sort of situation.
4. You can see in these painted figures that Ive tidied up the basic shapes and drawn more realistic outlines - very simple and exactly the same principles as in the Kangaroo sketches on an earlier page. 5. The direction people are facing is determined simply by a splash of colour for the hair which points the head in the required direction. To reinforce this its an easy matter to put their clothes on the right way round. The man in the grey suit and the woman in the yellow illustrate this perfectly. 6. Notice also how Ive let the womans top, skirt and legs blend together slightly to create a unity in the figure....
WATERCOLOUR SECRETS TIP: When you paint figures in a landscape dont put in any facial details, apart from the hair. Theyre not needed and will make the figure appear too fussy and complicated. Also, leave out feet wherever possible. Including them always makes them look clumsy and oversized. Instead, let the bottom of the legs melt into the shadow colour. Look at the figures on this page to see what I mean....
Watercolour Secrets
SECTION 9
1. Yes, this is what we - you - will be painting. If it looks a bit daunting dont worry. Its only composed of the elements that weve covered throughout this short course. Ive painted it with just the No.10 Round brush which was a bit of a challenge with some of the smaller details but youll see from the photos later on that it is possible with a little practice. Ive also only used 4 colours to keep things nice and simple! 2. Heres what I used:140lb Bockingford Watercolour Paper No. 10 Round Brush (You could use, say, a No.4 or a No.6 if this makes you feel more comfortable with the smaller details). Ultramarine Blue Permanent Rose Yellow Ochre Light Red HB Pencil and a Putty Eraser Drawing Board
3. The first thing I did was a tonal sketch (below right). This is only about 3 x 4 and is just a quick, rough sketch of the scene I had in mind. Its so helpful to do this sort of sketch beforehand as it helps you visualise what you want to paint and also if the composition is actually going to look right. Dont worry about detail or quality with this its no more than a memory aid to remind you what things should look like in the painting. 4. However, the main benefit is to work out where the lightest lights, darkest darks and the mid-tones will need to go, irrespective of the colours you use. In this case, you can see that underneath the large tree will be quite dark as will the doorway in the house, which forms a natural focal point with the couple walking towards it. See also how the dark trees behind the house help to make it stand out. Ive drawn the foreground fence a bit too dark and dominant so I need to remember to tone down its colour in the painting.
5. Im going to draw directly onto my watercolour paper, but if you prefer, draw it first on, say, cheap printer paper and then trace it onto the watercolour paper as explained in Section 1. The first thing Ive done is to draw a horizon line (eye line) about a quarter of the way up the paper from the base. Youll be rubbing some of this out later so only draw it heavy enough to see it. Ive made my drawing heavier than normal so it shows up in the photos.
6. Ive drawn two very simple background hills and Ive also added the main features including the road, the house and the large tree. The tree is leaning inwards to add interest and help frame the scene on that side. 7. The house is sitting on the horizon line and the road is compressed to emphasise that low viewpoint. Note from the dotted perspective lines Ive overlaid on the house that the Vanishing Point where they all theoretically meet can quite easily be off the paper.
VP
8. The rest of the details have been added and any unwanted parts of the horizon have been rubbed out. Then Ive brushed a layer of clean water over the whole picture and let it soak in to a damp stage. You can see the slight highlighted sheen which tells me its ready for the next stage - to add the paint!
9. To get warmth and light just above the hills and in the foreground Ive streaked across some Yellow Ochre (left), letting the water in the paper dilute it as it goes further up the paper. 10. Below left, Ive started on the sky with Ultramarine. I havent too much sky to play with before I reach the hills, so you can see in the right hand picture that Ive lightened it off quite quickly as I go down the paper.
11. Now Im rolling the semi-dry paintbrush, dampened with clean water and picking up some of the blue pigment as I go along. Remember to wash the brush out frequently as you do this or youll simply put the blue paint youve picked up back on the paper where its not wanted.
12. In this shot on the right Ive taken a bit more paint out by using a dampened paper towel -actually it was a piece of toilet tissue (clean!) that works just as well as kitchen roll. You can see this gives a nice wispy effect with the variation evident between using the brush and the tissue.
13. Im touching in (above) some cloud shadows with a medium strength mix of Ultramarine Blue, Permanent Rose and just a hint of Light Red to grey it down slightly. When the white clouds were lifted out with the brush and the tissue, they left a nice variety of damp, dry and semi-dry areas. When the cloud shadow is dabbed in, it forms some nice soft and hard edges also known as lost and found edges. 14. Above right, Ive touched in here and there a slightly stronger mix of Ultramarine. This blends nicely with the previous shadow colour to give a further subtle variation in the clouds. Nevertheless, Ive kept the cloud shadow reasonably muted as theres quite a lot of features in the rest of the picture, so I dont want a very busy sky that would compete with them.
15. Now, while the cloud shadow is still slightly moist, with a clean, damp brush (above), Im blending out some of the unwanted harder edges by very gently scraping the side of the brush upwards. You dont want anything other than a damp brush to do this! Dont overdo this either. Some hard edges are desirable for extra interest.
16. With a light mix of Ultramarine, Permanent Rose and a touch of Yellow Ochre, Ive painted in the left hand hill. You can see Im not worried about going over parts of the tree slightly as this will be hidden when we put on the foliage.
17. With a stronger mix of Yellow Ochre and a touch of Ultramarine (you dont need much or itll make it too dark) Im now streaking in the nearer hill. Notice how my brush-strokes are following the line of the hill from top right to bottom left to assist in defining the contours.
18. While this is still damp Ive added some streaks of much stronger Yellow Ochre. This may look too bright at the outset but will soon dry back to a more subtle shade. Remember, that the sun is shining on this side of the hill, so this helps to add that sunlit effect. A couple of streaks are fine dont overdo it!
19. Next, left, Ive added more streaks, this time with a strong mix of Ultramarine and Light Red. This gives a lovely purple-grey, which as you can see, quickly blends into the original wash to help create light and dark contours, especially on the top right of the hill, which would be in shadow. Again see how Ive followed the line of the hill with the brushstrokes. The hardest part here is to just put in the streaks, then leave things alone and not fiddle!
20. Next, left, we have a very strong mix of Ultramarine and a little Yellow Ochre for the dark trees behind the house. I find it easiest to paint carefully around the outline of the house and the roof and then work away from this to finish with ragged edges at the top of the trees. In the close-up below, Ive added another strong mix of neat Yellow Ochre while the tree colour is wet. This gives a bit of variety in the colouring, but dont add too much as we need to retain the dark colour to frame the house.
21. Below, Ive added the line of trees to the left of the cottage with the same colours but with more yellow and not quite as strong. Ive also put a medium strength mix of Yellow Ochre over the foreground and middle distance fields, once again, dragging the brushstrokes sideways to create a flat effect. Next, a light mix of Ultramarine and Light Red creates the road, avoiding painting the puddle area below the fence. 22. In the picture below right, Ive put some darker green (a touch of Ultramarine added) in the left foreground of the picture, using the same techniques as I used on the hill. The same colour has been touched in to define the edge of the road.
23. Ive also added a stronger mixture of the road colour in the bottom right hand corner while everything was still damp. This is a very useful technique with landscapes. By darkening the corners slightly, it forces the eye of the viewer into the centre of your picture and the main areas of interest. This general view of the picture illustrates very well how the dark background trees help the focal point of the picture - the house - to really stand out.
24. The foreground bush is treated in exactly the same way as the other trees and bushes, except that Ive used a strong mix of Yellow Ochre as the base colour. See how this contrasts nicely where it meets the background trees. Then while its still damp, Ive added strong touches of neat Ultramarine (left) and mixes of Ultramarine and Light Red (right), streaked here and there to simulate branches and twigs. You dont want anything too detailed here or it will compete for attention with the rest of the picture.
25. The three photos below demonstrate how easy it is to remove small areas of unwanted paint in a picture. In the photo on the left, Ive been quite cavalier with the way Ive put paint over the trunk as Ive been adding the fields and bushes. However, Ive used a small, flat brush with clean water (centre) to gently scrub away the offending paint. With a clean tissue, I can now dab out the area (right) so its almost pristine and Ill let this area dry before I paint the trunk. If Id accidentally dampened the paper just outside the line of the trunk and then painted it right away the new paint would have bled where I didnt want and Id have had to do another repair job alongside the tree....
26. A light wash of Ultramarine and Permanent Rose and just a dab of Light Red produce a lovely sunny shadow colour. Here, its been added to the front of the house. In the picture, below, after it has dried, Ive added a line to represent the really dark shadow under the eaves. Ill also put in this colour for the windows and door. Notice how a simple letter E on the side wall of the house gives us the required shadows for that window and window-sill.
27. In the photo below, the fence has been painted with a pale grey created with Ultramarine and Light Red. By painting separate lines for the two visible faces of the fence posts, see how the thin white line left in between creates a natural highlight. In the lower right close-up, Ive waited till the fence colour dries then added the same mix on the shadow sides. The posts have been deliberately placed at random distances and angles to create more interest than a line of soldiers. The broken cross piece immediately below the couple has been intentionally included as this creates a way in for the eye to move across to the figures.
28. We now come on to the large tree where a base coat of Yellow Ochre is scraped on sideways with the brush creating several overlapping banana shapes. You can see Im only using the pencil outline of the tree foliage as a guideline. Im not worried about going over it here and there; otherwise Id get too deliberate and tight in applying the paint. 29. Below left and while the base coat is still damp, Ive started to add the mid-tone colour, which is more Yellow Ochre with just a touch of Ultramarine. Im putting touches of this colour over the top of the unpainted areas Ive left in the tree as this would be where the shadows would appear. Below right, this is what the tree looks like after this second coat. Theres less of it on the left hand side as this will be catching the sun.
30. The darkest coat is now added in the same way as the second, wet-in-wet. The darkest areas of trees tend to be in the centre and underneath where the trunk disappears into the leaves. This mix is Ultramarine and Light Red with just a touch of Yellow Ochre to bring out some green. In the close up below right see how, by adding a few dark leaves across the background fields and trees, it pushes them back into their proper place in the picture.
31. On the left, Ive added a pale mix of Ultramarine and Light Red for the grey of the trunk and visible branches, blending it into the still-damp leaves. Ive also run in some branches within the leaf clusters as they appear and disappear in the middle of the tree. 32. When the trunk has dried, Ive painted a stronger mix of the same colours on the right hand side to represent the shadow. Note that Ive also taken this up and underneath the leaves as this area would not catch the sun either.
33. Before this shadow strip dries Ive run a brush with a little clean water down the edge to blend it and create the three-dimensional roundness of the trunk. 34. If you want to, you could also lightly scrub out a lighter strip down the left side of the trunk to further emphasise the sunlight playing on it. This is exactly the same technique as I used to remove unwanted paint in Step 25.
35. Ive now added the tree shadow across the road. Its important, once again, to keep the brushstrokes horizontal so the shadow sits flat on the ground. Dont worry about taking it across the fence as this would be partially shaded by the trees and therefore have a dappled effect.
36. The cottage roof has been streaked downwards with a medium strength Light Red, using a brush dried off slightly on the paper tissue to take out excess paint. This allows me to deliberately create plenty of unpainted streaks to emphasise the sunny day. Following this, in the lower photo, Ive done the same with just a tiny streak or two of Ultramarine and let it all blend.
37. The bushes to the left of the cottage have been darkened with Ultramarine and Yellow Ochre and slightly raised. This allows me to put a medium strength mix of the shadow colour on the side wall, emphasising the sunlight on these trees.
38. Not far from the finishing line now. The figures have been painted very simply with touches of Light Red and Ultramarine to create impact as they are lead the eye to the focal point. The dark grey trousers on both have been painted with a mix of Blue, Yellow and Red. I was going to paint the lady on the left in a skirt, but the pale colour of her legs wouldnt have shown up against the light grass. The dog was created using the same colours as for the figures trousers with a lighter area on its left side in the sunlight.
39. When including animals and figures in the middle distance like this, even in a large picture, theyre only going to be about 1 tall - probably 1 maximum, so theres absolutely no need (or room) for detail. This picture were doing is approximately 14 x 10 and the figures are only about (18mm) tall. Even in this cruel close-up they look perfectly OK in the context of the picture. Remember what I said about not painting shoes and blending the shadows into the bottom of the legs, as weve done here....
40. With a very pale wash of Ultramarine, Im putting in the puddle. Its particularly important that the brush strokes are horizontal when you paint water, otherwise it will look as if the water is running downhill. 41. Once this is dry, Ive added the reflections. Two things I hope you remember from the tutorial in Section 7. First, note the direction of the reflections, especially where the posts are angled. Second, the dark areas reflect lighter and the light areas reflect darker - or put another way, the tonal contrast is less. 42. Ive dabbed in some dark green colour to define where the edge of the road is beyond the puddle, as well as grass that grows around the base of the fence posts. Notice how Ive left it as a hit and miss effect. You want this sort of detail to appear random and uncontrived.
43. While its still wet, Ive spread out the hairs on the brush as you can see in the close-up and lightly dragged the green paint upwards to simulate grass. Dont forget to drag the paint downwards as well to create the reflections. In fact, if you have a puddle and cant engineer an item above it to be reflected, using short, grassy tufts like these is an excellent way to confirm that the viewer is looking at water. Note also from the photo above that the figures and dog dont have a reflection as theyre too far beyond the puddle.
44. Right, were done - except for one more thing.... Walk away from the picture and leave it for an hour or two. When you return you will invariably see little details youve missed or feel need adjustment. I noticed a couple of the shadows needed strengthening very slightly as did one or two branches in the big tree. However, this is a danger period as you can, through over-enthusiasm, start fiddling and spoil the final painting. Once you start looking for things to change, instead of them jumping out at you, then thats the time to really stop and sign it. I always feel that signing a painting is a way of telling me that its finished and Im not allowed to add any more. Incidentally, dont overlook the signature in your composition. Your signature in the bottom right or left corner may well help to add balance to a picture that lacks some sort of detail in this area.
Well there we are - the finished picture. Although its taken 44 steps, theyve all been fairly small and gentle ones to navigate. Everything has been based on what weve looked at in the previous 8 Sections and it just shows how perfectly possible it is to create your own minor masterpiece. The way ahead now is clear. More practice and enthusiasm = more success, which = the desire to keep at it. All the time you will be improving without realising it, so my final piece of advice in this short course is not to throw away any of your early works or perceived disasters. Look at them in a few weeks or a few months and youll be heartened by the progress youve made. I hope this short course will help you develop your watercolour landscapes and you find it as enjoyable to follow as it has been to produce. Remember practice as often as you can and you will make progress. Happy painting!
www.watercoloursecrets.com/blog
Best wishes,