Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    KNX

    Uploaded by

    trpac
    This document provides an overview of how KNX building automation technology can be used in both residential and commercial buildings to increase energy efficiency, comfort, flexibility and security. It discusses how various KNX sensors and controls can automate lighting, temperature, shading and other systems in halls, kitchens, living rooms, bedrooms, conference rooms, offices, corridors and more. KNX offers cost savings through energy efficiency and flexibility to adapt to changing building needs over time.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    KNX

    Uploaded by

    trpac
    1K views60 pages
    This document provides an overview of how KNX building automation technology can be used in both residential and commercial buildings to increase energy efficiency, comfort, flexibility and security. It discusses how various KNX sensors and controls can automate lighting, temperature, shading and other systems in halls, kitchens, living rooms, bedrooms, conference rooms, offices, corridors and more. KNX offers cost savings through energy efficiency and flexibility to adapt to changing building needs over time.

    Original Title

    Knx

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides an overview of how KNX building automation technology can be used in both residential and commercial buildings to increase energy efficiency, comfort, flexibility and security. It discusses how various KNX sensors and controls can automate lighting, temperature, shading and other systems in halls, kitchens, living rooms, bedrooms, conference rooms, offices, corridors and more. KNX offers cost savings through energy efficiency and flexibility to adapt to changing building needs over time.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views60 pages

    KNX

    Uploaded by

    trpac
    This document provides an overview of how KNX building automation technology can be used in both residential and commercial buildings to increase energy efficiency, comfort, flexibility and security. It discusses how various KNX sensors and controls can automate lighting, temperature, shading and other systems in halls, kitchens, living rooms, bedrooms, conference rooms, offices, corridors and more. KNX offers cost savings through energy efficiency and flexibility to adapt to changing building needs over time.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 60

    Content

    KNX
    Presentation Quick Selection Guide System components Interfaces/gateways Push-button Binary inputs Movement detector Other sensors Switch actuators Blind/switch actuators Dimming actuators/ control units Control and display devices Room temperature control units Accessories Index 2 12 24 30 33 56 60 70 77 84 87 92 97 117 118

    ISC01217_V2.1_03_2010_EN

    How to make your building smart

    All buildings are made intelligent with KNX


    Intelligent building control from Schneider Electric now unites functions under one roof which were previously controlled separately and this with optimum energy consumption. It is based on KNX a standard suitable for all types of buildings.
    Globally valid standard
    KNX is a global standard used by 175 manufacturers worldwide.

    Certified system
    All KNX products regardless of manufacturer are certified by the KNX Association, which guarantees their compatibility.

    Cost efficiency
    KNX guarantees savings on energy consumption and hence on costs too. Mounting times are short and installation is simple, quick and safe.

    Flexibility via expandability


    The KNX system can be easily adapted should requirements in a building change without tearing open walls and laying new cables.

    Everything Under One Roof


    Greater flexibility and comfort, better cost efficiency and security with KNX

    Less is more

    Save energy and costs in the long term with KNX

    With a new building or building modernisation, whether for commercial or private use, one challenge youll face is how to accommodate such a wide range of requirements under one roof. How can I achieve long-term savings on energy costs? How can I secure the building against break-ins? These are questions every house builder and investor will face. Schneider Electric KNX solutions have the answers.

    Flexibility
    Those building today may not be planning for eternity but theyre planning for the long-term at least. So its a good idea if technical building equipment can also be adjusted simply, flexibly and at low cost to the modified requirements and its new users.

    Safety and security


    Building technology must be able to react quickly and intelligently in critical situations even when nobodys left in the building. With central control of building functions too, a single press of a button will ensure the lights are turned off when an office or house is vacated or that power is switched off for all socket-outlets connected to devices such as photocopiers and kettles.

    Comfort
    Demands for comfort are not just greater than ever before but ever more individualised too. Technology therefore not only needs to be flexible but simple and convenient to operate.

    Cost efficiency
    Did you know that the latest building control systems can result in energy savings of up to 30%? This has a positive effect on ongoing operating costs and increases the attractiveness of a property for users and tenants particularly against a background of rising energy costs. Furthermore, efficient use of energy also pays out for our environment.

    A good, fast, cheap and clean solution is to use energy more efficiently. This is not only better for the environment but for your wallet too. This is precisely where KNX comes in, as intelligent building technology enables huge savings on energy, thus reducing operating costs: energy efficiency equals cost efficiency.

    Less energy, more efficiency Reliable energy efficiency with KNX and SeeTool
    With the SeeTool, making energy efficiency a reality is simple. It reveals concrete potential savings for your building when compared to conventional installations as early as the planning phase and provides solutions for building control with KNX so this potential can be exploited to the full.

    The benefits of SeeTool at a glance


    Less products, more efficient solutions
    When suggesting solutions, the SeeTool has access to a range of Schneider Electric KNX products but these have been deliberately kept as few as possible. Our basic approach was to attain maximum efficiency using the minimum number of components - not just with a view to energy consumption but to keeping down costs for purchasing and installation too.

    Specific results for specific requirements


    Based on your data, the SeeTool will provide specific solution proposals including the components required and circuit diagrams. The precise potential compared to conventional installation will be worked out for each solution, providing concrete values that you can use to make realistic plans and calculations.

    Demonstrate your competence


    The SeeTool will prepare all results in a detailed results report. The solutions, facts and figures the report provides you with will enable you to demonstrate your competence and expertise. This will allow you to save energy and costs for your customers thereby making yourself priceless.

    Certified and tested


    The SeeTool has been evaluated by an independent institute, the VTT Technical Research Centre of Finland, which confirmed it to be in line with present methods for calculating energy use.

    Free-to-use
    The SeeTool is available free-of-charge and can be used conveniently and simply on a computer.

    Thats the life

    Hall:
    Do you often come home in the evening overloaded with shopping? If you dont want to have to put the bags down to switch on the light in the hall, simply install a KNX indoor movement detector above or next to the door. The light will then come on automatically as soon as you enter the house. During the day, the integrated light sensors ensure that the light doesnt come on when it is not needed.

    KNX in residential buildings


    The benefits of intelligent building control can obviously also be applied to private properties. Schneider Electric KNX solutions enable you to manage and control your home with ease, allowing complete relaxation.

    Movement detector, design System M

    Kitchen:
    With the KNX touch panel 7, youve got a view of the whole house from one central point for example in the kitchen where the control unit is installed. All lights and blinds in the house can be controlled from this point, and the temperature can also be set conveniently via the touch panel 7. Thanks to the Simulate presence function, the house looks occupied even when theres no-one home, if you simply press a button on the way out.

    KNX Weather station

    KNX room temperature control unit, design Unica

    Living room:
    You can comfortably control lighting scenes, blinds and the temperature from a central point, such as the multifunction push-button with room temperature control unit or from the comfort of your sofa using the IR remote control. You wont have to worry about the weather, either the weather station ensures that the heating is turned off when it isnt needed. Alternatively, if there is a storm, the blinds are raised automatically in order to prevent damage.
    Touch Panel 7, design System M

    Bedroom:
    With KNX, you can sleep in comfort and safety. Functions such as the lighting and the blinds can be controlled conveniently using the buttons. Different scenes such as the Panic scene, which switches on the lights throughout the entire house, can be saved in KNX, thus increasing security.

    Multifunction pushbutton with room temperature control unit, design System M

    Dining room:
    Your guests will be here any minute and you are nowhere near ready? At the touch of a button, you can switch on the appropriate lighting, start your stereo system and ensure that the temperature is right. KNX allows you to set individual scenes: Presets for lighting and room temperature for reading, dining or watching television, for example.

    Push button 2gang, design Unica

    Working made easy


    KNX in office buildings
    Flexibility and cost efficiency are particularly important when it comes to commercial buildings. With intelligent building control, you can effortlessly combine both under one roof as well as gaining from the practical benefits and additional comfort.

    Archiv:
    In rooms which are used less often, such as archives, people often forget to switch off the lights. From an energy efficiency point of view, there is a great potential for saving here.Simply control the lighting via a movement detector, and the superfluous energy consumption is gone. Of course, it is also much more convenient when the light comes on automatically.

    Optiline click-in system with KNX

    Movement detector, design Unica

    Conference room:
    Wouldnt it be great to be able to prepare for a presentation without having to worry too much about the technical side? In an intelligent conference room, theres no need to turn all the required switches on or off individually everything is conveniently controlled from a central switch unit. At the single push of a button, the screen can be automatically moved into position, the blinds lowered, the beamer switched on and the light dimmed.

    Presence detector

    Office:
    The 2-gang multi-function push-button with room temperature control unit conveniently creates a pleasant room climate. It is actually two devices in one: a multi-function push-button for controlling lights, scenes and blinds and an intelligent control unit for individual, room temperature regulation as and when required. There is also a presence detector to ensure that light and room temperature are adjusted depending on whether the room is actually occupied

    Movement detector 2,20, design System M

    Corridors:
    Corridors in office buildings are frequented much more often than, say, the file archive. However, they are similar in one respect: the lights in corridors are also often left on when they are not needed. This is another problem which can be dealt with using the System M design movement detector. The lighting is then only switched on when it is needed. As an added advantage, this also increases security, as any movement causes the lighting to switch on.
    Multifunction pushbutton with room temperature control unit, design Altire

    0

    

    KNX

    Quick selection guide

    KNX

    Quick selection guide

    System components Bus voltage supply


    KNX power supply REG-K/160 mA MTN684016 KNX power supply REG-K/160 mA with emergency input MTN683816 KNX power supply REG-K/320 mA MTN684032 KNX power supply REG-K/320 mA with emergency input MTN683832 KNX power supply REG-K/640 mA MTN684064 KNX power supply unit REG-K/640 mA with emergency power input MTN683890 REG emergency power supply MTN683901 Lead gel battery MTN668990 Lead gel battery MTN668991

    Interfaces/gateways Data interfaces


    Central plate with square opening Central plate with square opening

    nMTN296019 nMTN297960

    nMTN296025

    nMTN297914

    nMTN297844 nMTN297846

    nMTN297819

    nMTN297860

    USB interface, flush-mounted MTN681799 USB interface REG-K MTN681829

    Gateways
    TeleController Plus REG-K MTN680790 Handset for TeleController MTN660790 KNX DALI gateway REG-K/1/16(64)/64 MTN680191 KNX/IP router REG-K MTN680329

    System coupler

    Coupler REG-K MTN680204 KNX Logic module Basic REG-K MTN676090

    Push-button Push-buttons System M


    Push-button, 1-gang plus Push-button, 2-gang plus

    nMTN617119 nMTN627560 nMTN617419 nMTN627860


    MTN618319 MTN618320

    nMTN617125

    nMTN627514

    nMTN617219 nMTN627660 nMTN617519 nMTN627960


    MTN618419 MTN618420

    nMTN617225

    nMTN627614

    Push-button, 4-gang plus

    Push-button, 4-gang plus with IR receiver

    System accessories
    Bus connecting terminal MTN689701 Branch terminal, yellow/white MTN689702 Blanking cover Blanking cover

    nMTN617425

    nMTN627814

    nMTN617525

    nMTN627914

    Labelling sheets for push-buttons

    Labelling sheets for multi-function push-button with IR receiver

    Protective hood for plaster MTN627591

    Push-button 2-gang plus with room temperature control unit

    nMTN662319 nMTN662119

    nMTN662325 nMTN662114

    nMTN662144 nMTN662160

    nMTN662219

    nMTN662260

    nMTN662246

    nMTN6212-0319 nMTN6214-0319

    nMTN6212-0325 nMTN6214-0325

    nMTN6212-0414 nMTN6214-0414

    nMTN6212-0460 nMTN6214-0460

    Push-button 4-gang plus with room temperature control unit

    IR remote control Distance 2010 MTN570222

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Quick selection guide

    KNX

    Quick selection guide

    Rocker for 1-gang push-button module

    Rocker for 1-gang push-button module with 1/0 imprint

    Rocker for 1-gang push-button module

    Rocker for 1-gang push-button module with 1/0 imprint

    nMTN619119 nMTN625160 nMTN619419

    nMTN619125

    nMTN625114

    nMTN619319 nMTN625460 nMTN625560


    MTN625199

    nMTN619325

    nMTN625414

    nMTN626144 nMTN626146 nMTN626544

    nMTN626119

    nMTN626160

    nMTN626444 nMTN626446 nMTN626546


    MTN626199

    nMTN626419

    nMTN626460

    Rocker for 1-gang push-button module with up/down arrow imprint

    Rocker for 1-gang push-button module with up/down arrow imprint

    nMTN619425

    nMTN625514

    nMTN626519

    nMTN626560

    KNX push-button module, 1-gang

    KNX push-button module, 1-gang

    Rockers for 2-gang push-button module

    Rockers for 2-gang push-button module with 1/0 and up/down arrow imprint

    Rockers for 2-gang push-button module

    Rockers for 2-gang push-button module with 1/0 and up/down arrow imprint

    nMTN619219 nMTN625260

    nMTN619225

    nMTN625214

    nMTN619519 nMTN625660

    nMTN619525

    nMTN625614

    nMTN626244 nMTN626246

    nMTN626219

    nMTN626260

    nMTN626644 nMTN626646

    nMTN626619

    nMTN626660

    Rockers for 2-gang push-button module with up/down arrow and 1/0 imprint

    Rockers for 2-gang push-button module with up/down arrow imprint

    Rockers for 2-gang push-button module with up/down arrow and 1/0 imprint

    Rockers for 2-gang push-button module with up/down arrow imprint

    nMTN619619 nMTN625760

    nMTN619625

    nMTN625714

    nMTN619719 nMTN625860
    MTN625299

    nMTN619725

    nMTN625814

    nMTN626744 nMTN626746

    nMTN626719

    nMTN626760

    nMTN626844 nMTN626846
    MTN626299

    nMTN626819

    nMTN626860

    KNX push-button module, 2-gang

    KNX push-button module, 2-gang

    Push-buttons Artec/Trancent/Antique
    Push-button, 1-gang plus Push-button, 2-gang plus

    Push-button Trancent
    Control electronics, 1- to 4-gang

    nMTN628044 nMTN628046 nMTN628244 nMTN628246 nMTN628444

    nMTN628019

    nMTN628060

    nMTN628144 nMTN628146 nMTN628344 nMTN628346 nMTN628446

    nMTN628119

    nMTN628160

    MTN6164-4600

    Push-button, 3-gang plus

    Push-button, 4-gang plus

    nMTN628219

    nMTN628260

    nMTN628319

    nMTN628360

    Glass sensor cover, 1-gang MTN569100 MTN569101

    Push-button, 4-gang plus with IR receiver

    nMTN628419

    nMTN628460

    Glass sensor cover, 2-gang MTN569200 MTN569201 Glass sensor cover, 3-gang MTN569300 MTN569301

    Push-button 2-gang plus with room temperature control unit

    nMTN6212-4044 nMTN6214-4044

    nMTN6212-4019 nMTN6214-4019

    nMTN6212-4060 nMTN6214-4060

    nMTN6212-4146 nMTN6214-4146

    Cover foil for glass sensor cover MTN569190 MTN569290 MTN569390

    Push-button 4-gang plus with room temperature control unit

    Trancent frame, 1-gang Protective hood for plaster MTN628091 Labelling sheets for push-button plus MTN617819 MTN482160 Trancent frame, 2-gang MTN482260 Trancent frame, 3-gang MTN482360

    Push-buttons Altira
    KNX push-button 1-gang KNX push-button 2-gang

    nALB45150 nALB45152

    nALB46150 nALB46152

    nALB45151

    nALB46151

    KNX 1-gang push-button with IR receiver

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Quick selection guide

    KNX

    Quick selection guide

    Push-buttons Unica
    KNX push-button 1-gang KNX push-button 2-gang

    Binary input REG-K/4x24 MTN644892 Binary input REG-K/8x24 MTN644792 Binary input REG-K/4x230 MTN644992 Binary input REG-K/8x230 MTN644692

    nMGU3.530.18 nMGU3.532.18

    nMGU3.530.25 nMGU3.532.25

    nMGU3.531.18

    nMGU3.531.25

    KNX 1-gang push-button with IR receiver

    KNX push-button 1-gang

    KNX push-button 2-gang

    Movement detectors
    KNX ARGUS 220 MTN632519 MTN632515 MTN632569

    nMGU5.530.18 nMGU5.532.18

    nMGU5.530.25 nMGU5.532.25

    nMGU5.531.18

    nMGU5.531.25

    KNX 1-gang push-button with IR receiver

    KNX push-button 1-gang

    KNX push-button 2-gang

    nMGU50.530.18 nMGU50.532.18

    nMGU50.530.25 nMGU50.532.25

    nMGU50.531.18

    nMGU50.531.25

    KNX 1-gang push-button with IR receiver

    Push-buttons Unica Top


    KNX push-button 1-gang KNX push-button 2-gang

    Movement detectors System M, Artec, Trancent, Antique


    KNX ARGUS 180, flush-mounted KNX ARGUS 180, flush-mounted

    nMGU3.530.30 nMGU3.532.30

    nMGU3.530.12 nMGU3.532.12

    nMGU3.531.30

    nMGU3.531.12

    KNX 1-gang push-button with IR receiver

    nMTN631619 nMTN632660 nMTN631719

    nMTN631625

    nMTN632614

    nMTN631844 nMTN631846 nMTN632760

    nMTN631819

    nMTN631860

    KNX ARGUS 180/2.20 m flush-mounted

    nMTN631725

    nMTN632714

    KNX push-button 1-gang

    KNX push-button 2-gang

    nMGU5.530.30 nMGU5.532.30

    nMGU5.530.12 nMGU5.532.12

    nMGU5.531.30

    nMGU5.531.12

    KNX 1-gang push-button with IR receiver

    Movement detectors Altira


    KNX Movement detector 180

    KNX push-button 1-gang

    KNX push-button 2-gang

    nMGU50.530.30 nMGU50.532.30

    nMGU50.530.12 nMGU50.532.12

    nMGU50.531.30

    nMGU50.531.12

    nALB45153

    nALB46153

    KNX 1-gang push-button with IR receiver

    Movement detectors Unica Binary inputs


    KNX Movement detector 180 Push-button interface, 2-gang plus MTN670802 Push-button interface, 4-gang plus MTN670804 Binary input REG-K/4x10 MTN644492 Binary input REG-K/8x10 MTN644592

    nMGU3.533.18 nMGU5.533.18 nMGU50.533.18

    nMGU3.533.25 nMGU5.533.25 nMGU50.533.25

    KNX Movement detector 180

    KNX Movement detector 180

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Quick selection guide

    KNX

    Quick selection guide

    Movement detectors Unica Top


    KNX Movement detector 180

    Time switch
    Year time switch REG-K/4/324 MTN677129 Year time switch REG-K/4/324 DCF-77 MTN677029 KNX timer REG-K MTN677290 DCF77 antenna MTN668091 OBELISK software MTN615034 Memory chip for year time switches MTN668092

    nMGU3.533.30 nMGU5.533.30 nMGU50.533.30

    nMGU3.533.12 nMGU5.533.12 nMGU50.533.12

    KNX Movement detector 180

    KNX Movement detector 180

    KNX presence detector


    KNX ARGUS Presence Basic MTN630719 MTN630760 KNX ARGUS Presence MTN630819 MTN630860 KNX ARGUS Presence with light control and IR receiver MTN630919 MTN630960

    Switch actuators
    Switch actuator, flush-mounted/230/16 MTN629993 Switch actuator REG-K/2x230/10 with manual mode MTN649202 Switch actuator REG-K/2x230/16 with manual mode MTN647393 Switch actuator REG-K/2x230/16 with manual mode and current detection

    Surface-mounted housing for ARGUS Presence MTN550619

    KNX ARGUS Presence 180/2.20 m flush-mounted

    nMTN630419

    nMTN630425

    nMTN630614

    nMTN630660

    MTN647395 Switch actuator REG-K/4x230/10 with manual mode MTN649204 Switch actuator REG-K/4x230/16 with manual mode MTN647593

    Other sensors
    Analogue input REG-K 4-gang MTN682191 Analogue input module REG/4-gang MTN682192 KNX Basic weather station MTN663990 Mast and corner fastening for KNX Basic weather station MTN663992 KNX brightness and temperature sensor MTN663991 Weather station REG-K/4-gang MTN682991 Weather combi-sensor DCF-77 MTN663692

    Switch actuator REG-K/4x230/16 with manual mode and current detection MTN647595 Switch actuator REG-K/8x230/6 MTN646808 Switch actuator REG-K/8x230/10 with manual mode MTN649208 Switch actuator REG-K/8x230/16 with manual mode MTN647893 Switch actuator REG-K/8x230/16 with manual mode and current detection MTN647895 Switch actuator REG-K/12x230/10 with manual mode MTN649212 Switch actuator REG-K/12x230/16, with manual mode MTN648493 Switch actuator REG-K/12x230/16 with current detection and manual mode MTN648495

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Quick selection guide

    KNX

    Quick selection guide

    Other actuators Blind/switch actuators


    Analogue actuator REG-K/4-gang Blind/switch actuator REG-K/8x/16x/10 with manual mode MTN649908 Blind / switch actuator REG-K/12x/24x/10 with manual mode MTN649912 MTN682291 Analogue actuator module REG/4-gang MTN682292

    Blind actuators
    Blind actuator REG-K/2x/10 with manual mode MTN649802 Blind actuator REG-K/4x24/6 with manual mode MTN648704 Blind actuator REG-K/4x/6 MTN646704 Roller shutter actuator REG-K/4x/10 with manual mode MTN649704 Blind actuator REG-K/4x/10 with manual mode MTN649804 Blind actuator REG-K/8x/10 with manual mode MTN649808

    Control and display devices

    Devices for display and operation


    Touch panel 7 MTN6260-0007 Inner frame set for 7 touch panel

    nMTN6270-0119 nMTN6270-3619

    nMTN6270-0122

    Glass frame for 7 touch panel

    Metal frame for 7 touch panel

    Dimming actuators/control units Dimming actuators


    Dimming actuator REG-K/2x230/300 W MTN646630 Universal dimming actuator REG-K/230/1000 W MTN649310 Universal dimming actuator REG-K/230/500 W MTN649350 Universal dimming actuator REG-K/2x230/300 W MTN649330 Universal dimming actuator REG-K/4x230/250 W MTN649325 Universal dimming actuator REG-K/4x230/150 W MTN649315

    MTN6270-3721 MTN6270-3760

    MTN6270-3714 MTN6270-3719 MTN6270-3722

    Aluminium frame for 7 touch panel Frame for 7 touch panel

    nMTN6270-0019
    MTN6270-0001

    nMTN6270-0022

    Flush-mounted mounting box for IP touch panel 7 Cavity wall mounting box for touch panel 7 MTN6270-0002 USB cover for 7 touch panel

    nMTN6270-0219

    nMTN6270-0222

    IP touch panel 10

    nMTN683090
    KNX module for IP touch panel MTN683093 Real glass frame for IP touch panel 10

    Control units 1-10 V


    Control unit 0-10 V REG-K/1-gang with manual mode MTN647091 Control unit 0-10 V REG-K/3-gang with manual mode MTN646991

    nMTN489960
    Flush-mounted mounting box for IP touch panel 10 MTN683091 Cavity wall mounting box for IP touch panel 10 MTN683092

    0

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Quick selection guide

    KNX

    Quick selection guide

    Room temperature control units Room temperature control unit System M


    Push-button 2-gang plus with room temperature control unit

    Room temperature control unit Unica Top


    KNX Room temperature control unit with display

    nMTN6212-0319 nMTN6214-0319 nMTN6241-0319

    nMTN6212-0325 nMTN6214-0325 nMTN6241-0325

    nMTN6212-0414 nMTN6214-0414 nMTN6241-0414

    nMTN6212-0460 nMTN6214-0460 nMTN6241-0460

    nMGU3.534.30 nMGU5.534.30 nMGU50.534.30

    nMGU3.534.12 nMGU5.534.12 nMGU50.534.12

    Push-button 4-gang plus with room temperature control unit

    KNX Room temperature control unit with display

    Room temperature control unit with display

    KNX Room temperature control unit with display

    KNX Room temperature control unit, flush-mounted/PI with 4-gang push-button interface, System M

    nMTN616719
    MTN616790

    nMTN616725

    nMTN616814

    nMTN616860

    Room temperature control actuator


    EMO valve drive MTN639119 EMO valve drive with 2 binary inputs MTN639118 Programming magnet MTN639190

    Remote sensor for room temperature control unit UP/PI

    Room temperature control unit for properties

    nMTN6221-0319

    nMTN6221-0325

    nMTN6221-0414

    nMTN6221-0460

    Room temperature control unit Artec, Trancent, Antique


    Push-button 2-gang plus with room temperature control unit

    KNX fan coil actuator REG-K MTN645094

    nMTN6212-4044 nMTN6214-4044 nMTN6241-4044

    nMTN6212-4019 nMTN6214-4019 nMTN6241-4019

    nMTN6212-4060 nMTN6214-4060 nMTN6241-4060

    nMTN6212-4146 nMTN6214-4146 nMTN6241-4146

    Heating actuator REG-K/6x230/0.05 A MTN645129 Thermoelectric valve drive 230 V MTN639125 Thermoelectric valve drive 24 V MTN639126 Valve adapter VA50 for thermoelectric valve drive MTN639150 Valve adapter VA80 for thermoelectric valve drive MTN639180 Valve adapter VA78 for thermoelectric valve drive MTN639178

    Push-button 4-gang plus with room temperature control unit

    Room temperature control unit with display

    KNX Room temperature control unit, flush-mounted/PI with 4-gang push-button interface, Artec/Trancent/Antique

    nMTN616944
    MTN616790

    nMTN616919

    nMTN616960

    nMTN616946

    Remote sensor for room temperature control unit UP/PI

    Room temperature control unit Altira


    KNX Room temperature control unit with display

    Accessories Power supplies


    Power supply REG, 24 V DC / 0.4 A MTN693003 Power supply REG, 24 V DC / 1.25 A MTN693004 Power supply REG, AC 24 V/1 A MTN663529

    nALB45154

    nALB46154

    Room temperature control unit Unica


    KNX Room temperature control unit with display

    nMGU3.534.18 nMGU5.534.18 nMGU50.534.18

    nMGU3.534.25 nMGU5.534.25 nMGU50.534.25

    KNX Room temperature control unit with display

    KNX Room temperature control unit with display

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    System components

    KNX

    System components

    Bus voltage supply


    KNX power supply REG-K/160 mA KNX power supply REG-K/320 mA with emergency input

    Version

    Art. no. MTN684016

    Version

    Art. no. MTN683832

    For generating the bus voltage for a line with up to  bus devices. With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line. For installation on DIN rails EN 0. The bus is connected using a bus connecting terminal; a data rail is not necessary. Mains voltage: AC 0 - 0 V, 0-0 Hz Output voltage: DC 0 V Output current: max. 0 mA, short-circuit-proof Device width:  TE = approx.  mm Contents: With bus connecting terminal and cable cover.

    For generating the bus voltage for a line with up to  bus devices. The emergency power supply REG can be connected in order to buffer the bus voltage. With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line. For installation on DIN rails EN 0. The bus is connected using a bus connecting terminal; a data rail is not necessary. Mains voltage: AC 0 - 0 V, 0-0 Hz Output voltage: DC 0 V Output current: max. 0 mA, short-circuit-proof Device width:  TE = approx.  mm Accessories: REG-K emergency power supply, art. no. MTN0. Contents: With bus connecting terminal and cable cover.

    KNX power supply REG-K/160 mA with emergency input KNX power supply REG-K/640 mA

    Version

    Art. no. MTN683816 Version Art. no. MTN684064 For generating the bus voltage for a line with up to  bus devices. With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line. For installation on DIN rails EN 0. The bus is connected using a bus connecting terminal; a data rail is not necessary. Mains voltage: AC 0 - 0 V, 0-0 Hz Output voltage: DC 0 V Output current: max. 0 mA, short-circuit-proof Device width:  TE = approx.  mm Contents: With bus connecting terminal and cable cover.

    For generating the bus voltage for a line with up to  bus devices. The emergency power supply REG can be connected in order to buffer the bus voltage. With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line. For installation on DIN rails EN 0. The bus is connected using a bus connecting terminal; a data rail is not necessary. Mains voltage: AC 0 - 0 V, 0-0 Hz Output voltage: DC 0 V Output current: max. 0 mA, short-circuit-proof Device width:  TE = approx.  mm Accessories: REG-K emergency power supply, art. no. MTN0. Contents: With bus connecting terminal and cable cover.

    KNX power supply REG-K/320 mA

    KNX power supply unit REG-K/640 mA with emergency power input

    Version

    Art. no. MTN684032

    Version light grey

    Art. no. MTN683890

    For generating the bus voltage for a line with up to  bus devices. With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line. For installation on DIN rails EN 0. The bus is connected using a bus connecting terminal; a data rail is not necessary. Mains voltage: AC 0 - 0 V, 0-0 Hz Output voltage: DC 0 V Output current: max. 0 mA, short-circuit-proof Device width:  TE = approx.  mm Contents: With bus connecting terminal and cable cover.

    For generating the bus voltage for a line with up to  bus devices. The emergency power supply REG can be connected in order to buffer the bus voltage. With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line. For installation on DIN rails EN 0. The bus is connected using a bus connecting terminal; a data rail is not necessary. Mains voltage: AC 0 - 0 V, 0-0 Hz Output voltage: DC 0 V Output current: max. 0 mA, short-circuit-proof Device width:  modules = approx.  mm Accessories: REG-K emergency power supply, art. no. MTN0. Contents: With bus connecting terminal and cable cover.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    System components

    KNX

    System components

    System coupler
    REG emergency power supply Coupler REG-K

    Version light grey

    Art. no. MTN683901

    Version light grey

    Art. no. MTN680204

    To buffer the bus voltage. If a complete mains failure occurs, an external lead gel battery with a voltage of DC  V (SELV) can be connected to the REG power supply for buffering. The lead gel battery is recharged or maintained in its charged state by integrated charging electronics. A binary input can be connected in order to register the operational statuses (mains voltage, error warning, battery operation). For installation on DIN rails EN 0. A data rail is not necessary. Mains voltage: AC 0 - 0 V, 0-0 Hz Output to power supply:Output voltage: DC 0 V  V Output current:without battery with mains supply max. 300 mA, with battery without mains supply max. 0 mA Short-circuit current: < . A Charging current: max.  A Connections: plug-in screw terminal for main connector, operating state (4-pin, 3 floating contacts) and emergency power supply. Plug-in terminal for battery connection (two  mm pins) Device width:  modules = approx.  mm Accessories: Lead gel battery, art. no. MTN0. Lead gel battery, art. no. MTN. Binary input REG-K/x, art. no. MTN. Power supply REG, DC  V/0. A, art. no. MTN00. Contents: With connecting terminal and cable cover

    For logical connection and electrical isolation of lines and areas. For mounting on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. Contact established with the primary and secondary line via bus connecting terminal. Device width:  modules = approx.  mm Contents: With  bus connecting terminals.

    KNX Logic module Basic REG-K

    Version light grey

    Art. no. MTN676090

    Lead gel battery

    Version . Ah

    Art. no. MTN668990

    Lead gel battery to connect to the emergency input of the power supply 0 REG-K with battery connection. Nominal voltage: DC  V Capacity: . Ah

    Lead gel battery

    Version

    Art. no. MTN668991

    Lead gel battery for connecting to the emergency power supply REG. Nominal voltage: DC  V Capacity:  Ah

    In KNX installations, the logic module serves as a logic and control device. It has 0 logic, 0 filter/timer, 8 converter and 12 multiplexer modules. With 3 freely programmable push-buttons and  status LEDs. They can be assigned control and test functions and can be operated on the device. KNX software functions: 10 logic modules (AND, OR, XOR) Each with up to  binary input objects and an output object. Input and output object inversion. Output disable via gate function. Behaviour of each input object after bus reset. Adjustable sending behaviour. 10 filter and timer modules Binary input objects and an output object with time delays. Binary input object filtering before output. Output disable via gate function. Behaviour of each input object after bus reset. Adjustable sending behaviour. 8 converter modules Conversion of  bit switching telegrams into  bit priority control. Conversion of  bit switching telegrams into  bit value telegrams. Conversion of  bit value telegrams into  bit switching telegrams. Output disable via gate function. Behaviour of each input object after bus reset. Adjustable sending behaviour. 12 multiplexer modules (lighting control) Multiplexer modules are used to selectively control telegrams, e.g. to toggle between single room and total room control for conference rooms with partition walls. Supported telegram formats by module:  bit,  bit,  bit,  bit ,  byte. A module can be used for the  byte format. Telegram forwarding/blocking in one or both directions using the control object. Adjustable gate behaviour. Adjustable control object behaviour. Output disable via gate function. Adjustable sending behaviour. Adjustable sending delay. Push-button and LED assignment The three push-buttons and the three LEDs can be freely assigned with binary objects. Behaviour per LED. Behaviour per push-button. Behaviour after bus reset Adjustable module start-up delay after bus voltage recovery. Device width: . module = approx.  mm

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    System components

    KNX

    System components

    System accessories
    Bus connecting terminal IR remote control Distance 2010

    Version red/dark grey

    Art. no. MTN689701

    Version black

    Art. no. MTN570222

    For connecting max.  core pairs to an KNX device, can also be used as a branch terminal. Consists of two interlocked terminal parts in red (+) and dark grey (-), each with  plug-in terminals. For solid conductors with a diameter of 0. to 0. mm.

    Branch terminal, yellow/white

    0-channel IR remote control. For the control of all TELE sensor covers, blind push-buttons with IR receiver, presence detectors with IR receiver and KNX devices with IR receivers. Battery:  microcells (IEC LR 0, AAA) Range: up to 0 m Contents: Without battery.

    Version yellow/white

    Art. no. MTN689702

    Branch terminal comprising two interlocking terminal parts in yellow and white, each with  plug-in terminals. For solid conductors with a diameter of 0. to 0. mm. For wiring the yellow/white cores of the bus cable.

    Blanking cover

    Version

    Art. no. MTN662319 MTN662325 MTN662144 MTN662119 MTN662114 MTN662160

    n white, polar
    glossy glossy

    n white, active nwhite npolar white nanthracite naluminium


    For System M.

    Blanking cover

    Version

    Art. no. MTN662219 MTN662260 MTN662246

    npolar white naluminium n varnished stainless steel

    For Artec, Trancent, Antique.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Interfaces/gateways

    KNX

    Interfaces/gateways

    Data interfaces
    Central plate with square opening Central plate with square opening

    Gateways
    TeleController Plus REG-K

    Version

    Art. no. MTN296019 MTN296025

    Version

    Art. no. MTN297844 MTN297819 MTN297860

    Version light grey

    Art. no. MTN680790

    n white, polar
    glossy glossy

    nwhite npolar white naluminium

    n white, active

    nanthracite naluminium

    MTN297914 MTN297960

    nstainless steel

    MTN297846

    For System M. for loudspeaker connection inserts or flushmounted USB interface.

    For Artec, Trancent, Antique. for loudspeaker connection inserts or flushmounted USB interface.

    The TeleController Plus REG-K connects the telephone network with conventional inputs/outputs and KNX. Six switch outputs for conventional relays or surge switches. Six connections, in order to show the current switching status of the surge switch. Six signal inputs for break or make contacts. The TeleController can forward incoming signals to selected participants. Up to 0 communication objects for KNX. To control devices or display the statuses. Connection for an alarm acknowledgement key to reset active messages, for example. Connection to functionally switch off the TeleController. This is controlled using a conventional DTMF telephone or a DTMF hand transmitter. Messages are conveyed by announcements, SMS, e-mail or fax to the selected participants. The corresponding texts can be changed with the handset. The device is operated with a rotary knob and is supported by display texts and announcements. The PC software provided enable convenient operation and configuration. With integrated bus coupler. For installation on DIN rails EN 0. The bus is connected using screw terminals; a data rail is not necessary. Power supply: DC - V Power consumption: 0 mA at  V (open circuit), 0 mA at  V (max. load) Switch outputs: , 00 mA at  V/ V Alarm outputs: , 00 mA at  V/ V Signal inputs: 6, for floating make or break contacts Telephone: Analogue, CTR , line length  m KNX: Screw terminals RS 232: Cable length  m Device width:  modules = approx.  mm Accessories: Handset, art. no. MTN00. Contents: PC software, connection cable RS .

    USB interface, flush-mounted

    Version

    Art. no. MTN681799

    For connecting a programming or diagnostics device with a USB. or USB interface to the KNX. For screw mounting in the size 0 installation box. With integrated bus coupler. The device is connected to the bus with a bus connecting terminal. Compatible with ETS . Mounting depth: 0 mm Contents: With bus connecting terminal.

    Handset for TeleController

    USB interface REG-K Version anthracite Art. no. MTN660790

    Version light grey

    Art. no. MTN681829

    Speech output of the various messages can be monitored and changed with the handset.

    For connecting a programming or diagnostics device with a USB. or USB interface to the INSTABUS EIB. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. With integrated bus coupler. Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    0

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Interfaces/gateways

    KNX

    Push-button

    Push-buttons System M
    KNX DALI gateway REG-K/1/16(64)/64 Push-button, 1-gang plus Push-button, 2-gang plus

    Version light grey

    Art. no. MTN680191

    Version

    Art. no. MTN617119 MTN617125 MTN627514 MTN627560

    Version

    Art. no. MTN617219 MTN617225 MTN627614 MTN627660

    n white, polar
    glossy glossy

    n white, polar
    glossy glossy

    The DALI gateway connects the KNX with digital electronic ballasts equipped with a DALI interface. The gateway is the DALI master and power supply for the electronic ballasts. It supports the switching and dimming of up to  electronic ballasts in  groups and the control of  lightscenes. In addition, the  electronic ballasts can be individually activated via KNX or compiled via KNX group addresses. Error messages of individual electronic ballasts or each connected lamp can be transmitted to the KNX and visualised on display devices. DALI commissioning and configuration, as well as group assignment and scene setting can be carried out using: the device (display and operating buttons) a software tool (free of charge) the integrated Web server. The RH connection is used for connection to a PC (with standard browser). a portable Web panel or a PDA The device has  inputs for connecting push-buttons (building site operation), for example. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. The network and the DALI cable as well as the switch inputs are connected via screw terminals on the device. Supply voltage: AC 0 - 0 V, 0 - 0 Hz Inputs: , passive DC  -  V or AC  -  V Outputs: DALI D+, D- in line with DALI specification DC 16 - 18 V, 150 mA, short circuit-proof Interfaces: xRJ Connecting cable: . - . mm Type of protection: IP 0 Device width:  modules = approx. 0 mm Contents: With bus connecting terminal.

    n white, active nanthracite naluminium

    n white, active nanthracite naluminium

    For System M. With integrated bus coupling unit. Push-button with  operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light. The device is connected to the bus line with a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Accessories: Labelling sheets for push-buttons, art. no. MTN/0. Contents: With protective hood for plaster. With bus connecting terminal.

    For System M. With integrated bus coupling unit. Push-button with four operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light. The device is connected to the bus line with a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Accessories: Labelling sheets for push-buttons, art. no. MTN/0. Contents: With protective hood for plaster. With bus connecting terminal.

    KNX/IP router REG-K

    Labelling sheets for push-buttons

    Labelling sheets for multi-function pushbutton with IR receiver

    Version light grey

    Art. no. MTN680329 Version polar white silver Art. no. MTN618319 MTN618320 Version polar white silver Art. no. MTN618419 MTN618420

    The KNX/IP router enables telegrams to be forwarded between different lines via LAN (IP) as a rapid backbone. The device can additionally serve as a programming interface in order to connect a PC with the KNX bus (e.g. for ETS programming with suitable ETS). The IP address can be assigned dynamically via a DHCP server or via manual configuration (ETS parameter). The device operates in accordance with the KNXnet/IP specification using Core, device management, tunnelling and routing. The KNX/IP router forwards telegrams in both directions whilst taking a filter table into account and can buffer up to 0 telegrams. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. Supply voltage: DC -0 V (at DC  V 0 mA), AC - V Device width:  modules = approx.  mm Contents: With bus connecting terminal.

    For individual labelling of the System M pushbuttons with text or symbols. Contents:  sheet for every  products.

    For individual labelling of the System M multifunction push-button with IR receiver. Contents:  sheet for every  products.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Push-button

    KNX

    Push-button

    Push-button, 4-gang plus

    Push-button, 4-gang plus with IR receiver

    Push-button 2-gang plus with room temperature control unit

    Version

    Art. no. MTN617419 MTN617425 MTN627814 MTN627860

    Version

    Art. no. MTN617519 MTN617525 MTN627914 MTN627960

    Version

    Art. no. MTN6212-0319 MTN6212-0325 MTN6212-0414 MTN6212-0460

    n white, polar
    glossy glossy

    n white, polar
    glossy glossy

    n white, polar
    glossy glossy

    n white, active nanthracite naluminium

    nactive white, nanthracite naluminium

    n white, active nanthracite naluminium

    For System M. With integrated bus coupling unit. Push-button with  operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light. The device is connected to the bus line with a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Accessories: Labelling sheets for push-buttons, art. no. MTN/0. Contents: With protective hood for plaster. With bus connecting terminal.

    For System M. With integrated bus coupling unit. Push-button with  operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light. The functions of each of the keys can be triggered using an IR remote control. The push-button is pre-programmed for operation with a Merten IR remote control Distance. Many other IR remote controls (e.g. existing TV or CD player remote controls) can be taught into the push-buttons. The device is connected to the bus line with a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Accessories: Labelling sheets for multi-function push-button with IR receiver, art. no. MTN/0. Transmitter: IR remote control Distance, art. no. MTN0. Contents: With protective hood for plaster. With bus connecting terminal.

    Protective hood for plaster

    For System M. Convenient control unit with  operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light. With room temperature control unit and display. With  red LEDs. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the push-buttons: Switching, toggling, dimming, blind control (relative or absolute), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions, timed control with synchronisation, notification functions, the cyclic reading of external temperature values, fan control, operating modes, move setpoints. Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Scene function.

    Version

    Art. no. MTN627591

    Operation: Menu. Contents: With bus connecting terminal and supporting plate. Screw for protection against dismantling. With protective hood for plaster.

    For System M. To protect push-buttons, rockers, room temperature control units and room controllers from contamination from painting and decorating work. Note: When the protective hood for plaster is in place, the temperature measurement of the room temperature control unit is restricted.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Push-button

    KNX

    Push-button

    Push-button 4-gang plus with room temperature control unit

    Rocker for 1-gang push-button module

    Rocker for 1-gang push-button module with 1/0 imprint

    Version

    Art. no. MTN6214-0319 MTN6214-0325 MTN6214-0414 MTN6214-0460

    n white, polar
    glossy glossy

    Version

    Art. no. MTN619119 MTN619125 MTN625114 MTN625160

    Version

    Art. no. MTN619319 MTN619325 MTN625414 MTN625460

    n white, polar
    glossy glossy

    n white, polar
    glossy glossy

    n white, active nanthracite naluminium

    n white, active nanthracite naluminium

    n white, active nanthracite naluminium

    For System M. Convenient control unit with  operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light. With room temperature control unit and display. With integrated piezoelectric buzzer to display alarm states and IR receiver. All functions of the respective buttons can be controlled via IR remote control. With  red LEDs. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the push-buttons: Switching, toggling, dimming, blind control (relative or absolute), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions, timed control with synchronisation, notification functions, the cyclic reading of external temperature values, fan control, operating modes, move setpoints. Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Scene function. Operation: Menu. Transmitter: IR remote control Distance, art. no. MTN0. Contents: With bus connecting terminal and supporting plate. Screw for protection against dismantling. With protective hood for plaster.

    For System M. The rocker is attached to the -gang pushbutton module. Accessories: Protective hood for plaster, System M, art. no. MTN...

    For System M. The rocker is attached to the -gang pushbutton module. Accessories: Protective hood for plaster, System M, art. no. MTN...

    Rocker for 1-gang push-button module with up/down arrow imprint

    Version

    Art. no. MTN619419 MTN619425 MTN625514 MTN625560

    n white, polar
    glossy glossy

    n white, active nanthracite naluminium

    For System M. The rocker is attached to the -gang push-button module. Accessories: Protective hood for plaster, System M, art. no. MTN... KNX push-button module, 1-gang

    Version

    Art. no. MTN625199

    For System M. Push-button module without rocker. With programmable status display. The device is connected to the bus line with a bus connecting terminal. With integrated bus coupler. KNX software functions: The push-buttons can be parameterised either as a pair (dual-surface) or individually (single-surface). Single-surface: Switch ON or switch OFF, dimming, scenes. Dual-surface: Switch ON or switch OFF, dimming, scenes, blinds.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Push-button

    KNX

    Push-button

    Push-buttons Artec/Trancent/Antique
    Rockers for 2-gang push-button module Rockers for 2-gang push-button module with 1/0 and up/down arrow imprint Push-button, 1-gang plus Push-button, 2-gang plus

    Version

    Art. no. MTN619219 MTN619225 MTN625214 MTN625260

    Version

    Art. no. MTN619519 MTN619525 MTN625614 MTN625660

    Version

    Art. no. MTN628044 MTN628019 MTN628060 MTN628046

    Version

    Art. no. MTN628144 MTN628119 MTN628160 MTN628146

    n white, polar
    glossy glossy

    n white, polar
    glossy glossy

    nwhite npolar white naluminium nstainless steel

    nwhite npolar white naluminium nstainless steel

    n white, active nanthracite naluminium

    n white, active nanthracite naluminium

    For System M. The rockers are attached to the -gang pushbutton module. Accessories: Protective hood for plaster, System M, art. no. MTN...

    For System M. The rockers are attached to the -gang pushbutton module. Accessories: Protective hood for plaster, System M, art. no. MTN...

    Rockers for 2-gang push-button module with up/down arrow and 1/0 imprint

    Rockers for 2-gang push-button module with up/down arrow imprint

    Version

    Art. no. MTN619619 MTN619625 MTN625714 MTN625760

    Version

    Art. no. MTN619719 MTN619725 MTN625814 MTN625860

    n white, polar
    glossy glossy

    n white, polar
    glossy glossy

    n white, active nanthracite naluminium

    n white, active nanthracite naluminium

    For Artec, Trancent, Antique. With integrated bus coupling unit. Push-button with two operating buttons, operating display, two blue status displays which can be triggered separately, and a labelling field. The blue operating display can also be used as an orientation sign. The lower labelling field can be parameterised as an additional operating key. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. The device is connected to the bus line with a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Accessories: Labelling sheets for push-button plus art. no. MTN. Contents: With protective hood for plaster. With bus connecting terminal.

    For Artec, Trancent, Antique. With integrated bus coupling unit. Push-button with four operating buttons, operating display, four blue status displays which can be triggered separately, and a labelling field. The blue operating display can also be used as an orientation sign. The lower labelling field can be parameterised as an additional operating key. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. The device is connected to the bus line with a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Accessories: Labelling sheets for push-button plus art. no. MTN. Contents: With protective hood for plaster. With bus connecting terminal.

    For System M. The rockers are attached to the -gang pushbutton module. Accessories: Protective hood for plaster, System M, art. no. MTN...

    For System M. The rockers are attached to the -gang pushbutton module. Accessories: Protective hood for plaster, System M, art. no. MTN...

    KNX push-button module, 2-gang

    Version

    Art. no. MTN625299

    For System M. Push-button module without rockers. With programmable status display. The device is connected to the bus line with a bus connecting terminal. With integrated bus coupler. KNX software functions: The push-buttons can be parameterised either as a pair (dual-surface) or individually (single-surface). Single-surface: Switch ON or switch OFF, dimming, scenes. Dual-surface: Switch ON or switch OFF, dimming, scenes, blinds.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Push-button

    KNX

    Push-button

    Push-button, 3-gang plus

    Push-button, 4-gang plus

    Push-button, 4-gang plus with IR receiver

    Version

    Art. no. MTN628244 MTN628219 MTN628260 MTN628246

    Version

    Art. no. MTN628344 MTN628319 MTN628360 MTN628346

    Version

    Art. no. MTN628444 MTN628419 MTN628460 MTN628446

    nwhite npolar white naluminium nstainless steel

    nwhite npolar white naluminium nstainless steel

    nwhite npolar white naluminium nstainless steel

    For Artec, Trancent, Antique. With integrated bus coupling unit. Push-button with six operating buttons, operating display, six blue status displays which can be triggered separately, and a labelling field. The blue operating display can also be used as an orientation sign. The lower labelling field can be parameterised as an additional operating key. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. The device is connected to the bus line with a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Accessories: Labelling sheets for push-button plus art. no. MTN. Contents: With protective hood for plaster. With bus connecting terminal.

    For Artec, Trancent, Antique. With integrated bus coupling unit. Push-button with eight operating buttons, operating display, eight blue status displays which can be triggered separately, and a labelling field. The blue operating display can also be used as an orientation sign. The lower labelling field can be parameterised as an additional operating key. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. The device is connected to the bus line with a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Accessories: Labelling sheets for push-button plus art. no. MTN. Contents: With protective hood for plaster. With bus connecting terminal.

    For Artec, Trancent, Antique. With integrated bus coupling unit. Push-button with eight operating buttons, operating display, eight blue status displays which can be triggered separately, and a labelling field. The blue operating display can also be used as an orientation sign. The lower labelling field can be parameterised as an additional operating key. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. The functions of each of the keys can be triggered using an IR remote control. The push-button is pre-programmed for operation with a Merten IR remote control Distance. Many other IR remote controls (e.g. existing TV or CD player remote controls) can be taught to the push-buttons. The device is connected to the bus line with a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/ dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Accessories: Labelling sheets for push-button plus art. no. MTN. Transmitter: IR remote control Distance, art. no. MTN0. Contents: With protective hood for plaster. With bus connecting terminal.

    0

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Push-button

    KNX

    Push-button

    Push-button 2-gang plus with room temperature control unit

    Push-button 4-gang plus with room temperature control unit

    Version

    Art. no. MTN6212-4044 MTN6212-4019 MTN6212-4060 MTN6212-4146

    Version

    Art. no. MTN6214-4044 MTN6214-4019 MTN6214-4060 MTN6214-4146

    nwhite, glossy n white, polar


    glossy

    nwhite, glossy n white, polar


    glossy

    naluminium nstainless steel

    naluminium nstainless steel

    For Artec, Trancent, Antique. Convenient control unit with  operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light. With room temperature control unit and display. With  blue LEDs. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the push-buttons: Switching, toggling, dimming, blind control (relative or absolute), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions, timed control with synchronisation, notification functions, the cyclic reading of external temperature values, fan control, operating modes, move setpoints. Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Scene function. Operation: Menu. Contents: With bus connecting terminal and supporting plate. Screw for protection against dismantling. With protective hood for plaster.

    For Artec, Trancent, Antique. Convenient control unit with  operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light. With room temperature control unit and display. With integrated piezoelectric buzzer to display alarm states and IR receiver. All functions of the respective buttons can be controlled via IR remote control. With  blue LEDs. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the push-buttons: Switching, toggling, dimming, blind control (relative or absolute), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions, timed control with synchronisation, notification functions, the cyclic reading of external temperature values, fan control, operating modes, move setpoints. Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Scene function. Operation: Menu. Transmitter: IR remote control Distance, art. no. MTN0. Contents: With bus connecting terminal and supporting plate. Screw for protection against dismantling. With protective hood for plaster.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Push-button

    KNX

    Push-button

    Protective hood for plaster

    Rocker for 1-gang push-button module with up/down arrow imprint

    Version

    Art. no. MTN628091

    Version

    Art. no. MTN626544 MTN626519 MTN626560 MTN626546

    nwhite npolar white naluminium n varnished stainless steel

    For Artec, Trancent, Antique. To protect push-buttons, rockers, room temperature control units and room controllers from contamination from painting and decorating work. Note: When the protective hood for plaster is in place, the temperature measurement of the room temperature control unit is restricted.

    Labelling sheets for push-button plus

    For Artec, Trancent, Antique. The rocker is attached to the -gang push-button module. Accessories: Protective hood for plaster, Artec, Trancent, Antique, art. no. MTN0... KNX push-button module, 1-gang

    Version

    Art. no. MTN617819 Version Art. no. MTN626199 For Artec, Trancent, Antique. Push-button module without rocker. With programmable status display. The device is connected to the bus line with a bus connecting terminal. With integrated bus coupler. KNX software functions: The push-buttons can be parameterised either as a pair (dual-surface) or individually (single-surface). Single-surface: Switch ON or switch OFF, dimming, scenes. Dual-surface: Switch ON or switch OFF, dimming, scenes, blinds.

    For individual labelling of the Artec/Trancent/Antique push-button plus with text or symbols. Contents:  sheet for 0 products.

    Rocker for 1-gang push-button module

    Rocker for 1-gang push-button module with 1/0 imprint

    Version

    Art. no. MTN626144 MTN626119 MTN626160 MTN626146

    Version

    Art. no. MTN626444 MTN626419 MTN626460 MTN626446 Version Art. no. MTN626244 MTN626219 MTN626260 MTN626246 Version Art. no. MTN626644 MTN626619 MTN626660 MTN626646 Rockers for 2-gang push-button module Rockers for 2-gang push-button module with 1/0 and up/down arrow imprint

    nwhite npolar white naluminium n varnished stainless steel

    nwhite npolar white naluminium n varnished stainless steel

    For Artec, Trancent, Antique. The rocker is attached to the -gang pushbutton module. Accessories: Protective hood for plaster, Artec, Trancent, Antique, art. no. MTN0...

    For Artec, Trancent, Antique. The rocker is attached to the -gang pushbutton module. Accessories: Protective hood for plaster, Artec, Trancent, Antique, art. no. MTN0...

    nwhite npolar white naluminium n varnished stainless steel

    nwhite npolar white naluminium n varnished stainless steel

    For Artec, Trancent, Antique. The rockers are attached to the -gang pushbutton module. Accessories: Protective hood for plaster, Artec, Trancent, Antique, art. no. MTN0...

    For Artec, Trancent, Antique. The rockers are attached to the -gang pushbutton module. Accessories: Protective hood for plaster, Artec, Trancent, Antique, art. no. MTN0...

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Push-button

    KNX

    Push-button

    Rockers for 2-gang push-button module with up/down arrow and 1/0 imprint

    Rockers for 2-gang push-button module with up/down arrow imprint

    Glass sensor cover, 1-gang

    Version

    Art. no. MTN626744 MTN626719 MTN626760 MTN626746

    Version

    Art. no. MTN626844 MTN626819 MTN626860 MTN626846

    Version transparent satinated

    Art. no. MTN569100 MTN569101

    nwhite npolar white naluminium n varnished stainless steel

    nwhite npolar white naluminium n varnished stainless steel

    For Artec, Trancent, Antique. The rockers are attached to the -gang pushbutton module. Accessories: Protective hood for plaster, Artec, Trancent, Antique, art. no. MTN0... KNX push-button module, 2-gang

    For Artec, Trancent, Antique. The rockers are attached to the -gang pushbutton module. Accessories: Protective hood for plaster, Artec, Trancent, Antique, art. no. MTN0...

    For switching and dimming lighting systems, controlling roller shutters and scenes (KNX). The glass sensor cover reacts to the lightest of touches. Control electronics evaluate the signal and forward it to the switch, dimming or roller shutter insert or bus coupler. Accessories: Cover foil for glass sensor cover, art. no. MTN0. Contents: With cover foil, -gang and screws.

    Glass sensor cover, 2-gang

    Version transparent Version Art. no. MTN626299 For Artec, Trancent, Antique. Push-button module without rockers. With programmable status display. The device is connected to the bus line with a bus connecting terminal. With integrated bus coupler. KNX software functions: The push-buttons can be parameterised either as a pair (dual-surface) or individually (single-surface). Single-surface: Switch ON or switch OFF, dimming, scenes. Dual-surface: Switch ON or switch OFF, dimming, scenes, blinds. satinated

    Art. no. MTN569200 MTN569201

    For switching and dimming lighting systems, controlling roller shutters and scenes (KNX). The glass sensor cover reacts to the lightest of touches. Control electronics evaluate the signal and forward it to the switch, dimming or roller shutter insert or bus coupler. Accessories: Cover foil for glass sensor cover, art. no. MTN0. Contents: With cover foil, -gang and screws.

    Glass sensor cover, 3-gang

    Push-button Trancent
    Version Control electronics, 1- to 4-gang transparent satinated Art. no. MTN569300 MTN569301

    Version - to -gang

    Art. no. MTN6164-4600

    For switching and dimming lighting systems, controlling roller shutters and scenes (KNX). The glass sensor cover reacts to the lightest of touches. Control electronics evaluate the signal and forward it to the switch, dimming or roller shutter insert or bus coupler. Accessories: Cover foil for glass sensor cover, art. no. MTN0. Contents: With cover foil, -gang and screws.

    For the Trancent range. The control electronics can be programmed as a -, - or -gang sensor cover. With orientation LED. Operation of the glass cover is acknowledged with a short tone. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: The covers facing each other can either be parameterised as a pair (dual-surface) or as individual buttons (single-surface). There are a total of  parameterisation options available. Single-surface: dimming, toggling, pulse edges, temperature, scenes. Dual-surface: blind control, switching, dimming, toggling, pulse edges, temperature, scene. Accessories: Cover foil for glass sensor cover, art. no. MTN0, MTN0, MTN0. In KNX, to be completed with: TRANCENT glass sensor cover, art. no. .., .., .., ... Contents: With bus coupler. With bus connecting terminal.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Push-button

    KNX

    Push-button

    Push-buttons Altira
    Cover foil for glass sensor cover KNX push-button 1-gang KNX push-button 2-gang

    Version for 00/0 for 00/0 for 00/0

    Art. no. MTN569190 MTN569290 MTN569390

    Version

    Art. no. ALB45150 ALB46150

    Version

    Art. no. ALB45151 ALB46151

    nwhite naluminium

    nwhite naluminium

    For individual labelling of the Trancent glass sensor covers with text or symbols. For laser printers Contents: For glass sensor cover, -gang:  sheet for  products. For glass sensor cover, -gang:  sheet for  products. For glass sensor cover, -gang:  sheet for  products.

    Trancent frame, 1-gang

    Version aluminium

    Art. no. MTN482160

    For vertical and horizontal installation.

     modules In Altira design. KNX-push-button with  buttons and  blue status LEDs. The status LED is located under the symbol window which can be taken off. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Contents: With set of 0 symbols: x symbol with light opening, x symbol , x symbol 0, x symbol for dimming, x symbol for shutter, x symbol (neutral). With bus connecting terminal.

     modules In Altira design. KNX-push-button with  buttons and  blue status LEDs. The status LED is located under the symbol window which can be taken off. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Contents: With set of 0 symbols: x symbol with light opening, x symbol , x symbol 0, x symbol for dimming, x symbol for shutter, x symbol (neutral). With bus connecting terminal.

    Trancent frame, 2-gang

    KNX 1-gang push-button with IR receiver

    Version aluminium

    Art. no. MTN482260

    Version

    Art. no. ALB45152 ALB46152

    nwhite naluminium

    For vertical and horizontal installation.

    Trancent frame, 3-gang

    Version aluminium

    Art. no. MTN482360

    For vertical and horizontal installation.

     modules In Altira design. KNX-push-button with  buttons, blue status LED and IR receiver. The status LED is located under the symbol window which can be taken off. The functions of each of the button can be triggered using an IR remote control. The push-button is pre-programmed for operation with a Schneider-Electric IR remote control Distance. Many other IR remote controls (e.g. existing TV or CD player remote controls) can be taught into the push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/ dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Transmitter: IR remote control Distance, art. no. MTN0. Contents: With bus connecting terminal.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Push-button

    KNX

    Push-button

    Push-buttons Unica
    KNX push-button 1-gang KNX push-button 2-gang KNX push-button 1-gang KNX push-button 2-gang

    Version

    Art. no. MGU3.530.18 MGU3.530.25

    Version

    Art. no. MGU3.531.18 MGU3.531.25

    Version

    Art. no. MGU5.530.18 MGU5.530.25

    Version

    Art. no. MGU5.531.18 MGU5.531.25

    nwhite nivory

    nwhite nivory

    nwhite nivory

    nwhite nivory

     modules In Unica design. KNX-push-button with  buttons and  blue status LEDs. The status LED is located under the symbol window which can be taken off. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Contents: With set of 0 symbols: x symbol with light opening, x symbol , x symbol 0, x symbol for dimming, x symbol for shutter, x symbol (neutral). With bus connecting terminal.

     modules In Unica design. KNX-push-button with  buttons and  blue status LEDs. The status LED is located under the symbol window which can be taken off. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Contents: With set of 0 symbols: x symbol with light opening, x symbol , x symbol 0, x symbol for dimming, x symbol for shutter, x symbol (neutral). With bus connecting terminal.

     modules In Unica design. KNX-push-button with  buttons and  blue status LEDs. The status LED is located under the symbol window which can be taken off. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Contents: With fixing frame. With set of 0 symbols: x symbol with light opening, x symbol , x symbol 0, x symbol for dimming, x symbol for shutter, x symbol (neutral). With bus connecting terminal.

     modules In Unica design. KNX-push-button with  buttons and  blue status LEDs. The status LED is located under the symbol window which can be taken off. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Contents: With fixing frame. With set of 0 symbols: x symbol with light opening, x symbol , x symbol 0, x symbol for dimming, x symbol for shutter, x symbol (neutral). With bus connecting terminal.

    KNX 1-gang push-button with IR receiver

    KNX 1-gang push-button with IR receiver

    Version

    Art. no. MGU3.532.18 MGU3.532.25

    nwhite nivory

    Version

    Art. no. MGU5.532.18 MGU5.532.25

    nwhite nivory

     modules In Unica design. KNX-push-button with  buttons, blue status LED and IR receiver. The status LED is located under the symbol window which can be taken off. The functions of each of the button can be triggered using an IR remote control. The push-button is pre-programmed for operation with a Schneider-Electric IR remote control Distance. Many other IR remote controls (e.g. existing TV or CD player remote controls) can be taught into the push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/ dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Transmitter: IR remote control Distance, art. no. MTN0. Contents: With bus connecting terminal.

     modules In Unica design. KNX-push-button with  buttons, blue status LED and IR receiver. The status LED is located under the symbol window which can be taken off. The functions of each of the button can be triggered using an IR remote control. The push-button is pre-programmed for operation with a Schneider-Electric IR remote control Distance. Many other IR remote controls (e.g. existing TV or CD player remote controls) can be taught into the push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/ dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Transmitter: IR remote control Distance, art. no. MTN0. Contents: With fixing frame. With bus connecting terminal.

    0

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Push-button

    KNX

    Push-button

    Push-buttons Unica Top


    KNX push-button 1-gang KNX push-button 2-gang KNX push-button 1-gang KNX push-button 2-gang

    Version

    Art. no. MGU50.530.18 MGU50.530.25

    Version

    Art. no. MGU50.531.18 MGU50.531.25

    Version

    Art. no. MGU3.530.30 MGU3.530.12

    Version

    Art. no. MGU3.531.30 MGU3.531.12

    nwhite nivory

    nwhite nivory

    naluminium ngraphite

    naluminium ngraphite

     modules In Unica design. KNX-push-button with  buttons and  blue status LEDs. The status LED is located under the symbol window which can be taken off. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Contents: With fixing frame and claws. With set of 0 symbols: x symbol with light opening, x symbol , x symbol 0, x symbol for dimming, x symbol for shutter, x symbol (neutral). With bus connecting terminal.

     modules In Unica design. KNX-push-button with  buttons and  blue status LEDs. The status LED is located under the symbol window which can be taken off. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Contents: With fixing frame and claws. With set of 0 symbols: x symbol with light opening, x symbol , x symbol 0, x symbol for dimming, x symbol for shutter, x symbol (neutral). With bus connecting terminal.

     modules In Unica Top design. KNX-push-button with  buttons and  blue status LEDs. The status LED is located under the symbol window which can be taken off. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Contents: With set of 0 symbols: x symbol with light opening, x symbol , x symbol 0, x symbol for dimming, x symbol for shutter, x symbol (neutral). With bus connecting terminal.

     modules In Unica Top design. KNX-push-button with  buttons and  blue status LEDs. The status LED is located under the symbol window which can be taken off. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Contents: With set of 0 symbols: x symbol with light opening, x symbol , x symbol 0, x symbol for dimming, x symbol for shutter, x symbol (neutral). With bus connecting terminal.

    KNX 1-gang push-button with IR receiver

    KNX 1-gang push-button with IR receiver

    Version

    Art. no. MGU50.532.18 MGU50.532.25

    Version

    Art. no. MGU3.532.30 MGU3.532.12

    nwhite nivory

    naluminium ngraphite

     modules In Unica design. KNX-push-button with  buttons, blue status LED and IR receiver. The status LED is located under the symbol window which can be taken off. The functions of each of the button can be triggered using an IR remote control. The push-button is pre-programmed for operation with a Schneider-Electric IR remote control Distance. Many other IR remote controls (e.g. existing TV or CD player remote controls) can be taught into the push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/ dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Transmitter: IR remote control Distance, art. no. MTN0. Contents: With fixing frame and claws. With bus connecting terminal.

     modules In Unica Top design. KNX-push-button with  buttons, blue status LED and IR receiver. The status LED is located under the symbol window which can be taken off. The functions of each of the button can be triggered using an IR remote control. The push-button is pre-programmed for operation with a Schneider-Electric IR remote control Distance. Many other IR remote controls (e.g. existing TV or CD player remote controls) can be taught into the push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/ dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Transmitter: IR remote control Distance, art. no. MTN0. Contents: With bus connecting terminal.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Push-button

    KNX

    Push-button

    KNX push-button 1-gang

    KNX push-button 2-gang

    KNX push-button 1-gang

    KNX push-button 2-gang

    Version

    Art. no. MGU5.530.30 MGU5.530.12

    Version

    Art. no. MGU5.531.30 MGU5.531.12

    Version

    Art. no. MGU50.530.30 MGU50.530.12

    Version

    Art. no. MGU50.531.30 MGU50.531.12

    naluminium ngraphite

    naluminium ngraphite

    naluminium ngraphite

    naluminium ngraphite

     modules In Unica Top design. KNX-push-button with  buttons and  blue status LEDs. The status LED is located under the symbol window which can be taken off. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Contents: With fixing frame. With set of 0 symbols: x symbol with light opening, x symbol , x symbol 0, x symbol for dimming, x symbol for shutter, x symbol (neutral). With bus connecting terminal.

     modules In Unica Top design. KNX-push-button with  buttons and  blue status LEDs. The status LED is located under the symbol window which can be taken off. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Contents: With fixing frame. With set of 0 symbols: x symbol with light opening, x symbol , x symbol 0, x symbol for dimming, x symbol for shutter, x symbol (neutral). With bus connecting terminal.

     modules In Unica Top design. KNX-push-button with  buttons and  blue status LEDs. The status LED is located under the symbol window which can be taken off. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Contents: With fixing frame and claws. With set of 0 symbols: x symbol with light opening, x symbol , x symbol 0, x symbol for dimming, x symbol for shutter, x symbol (neutral). With bus connecting terminal.

     modules In Unica Top design. KNX-push-button with  buttons and  blue status LEDs. The status LED is located under the symbol window which can be taken off. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Contents: With fixing frame and claws. With set of 0 symbols: x symbol with light opening, x symbol , x symbol 0, x symbol for dimming, x symbol for shutter, x symbol (neutral). With bus connecting terminal.

    KNX 1-gang push-button with IR receiver

    KNX 1-gang push-button with IR receiver

    Version

    Art. no. MGU5.532.30 MGU5.532.12

    Version

    Art. no. MGU50.532.30 MGU50.532.12

    naluminium ngraphite

    naluminium ngraphite

     modules In Unica Top design. KNX-push-button with  buttons, blue status LED and IR receiver. The status LED is located under the symbol window which can be taken off. The functions of each of the button can be triggered using an IR remote control. The push-button is pre-programmed for operation with a Schneider-Electric IR remote control Distance. Many other IR remote controls (e.g. existing TV or CD player remote controls) can be taught into the push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/ dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Transmitter: IR remote control Distance, art. no. MTN0. Contents: With fixing frame. With bus connecting terminal.

     modules In Unica Top design. KNX-push-button with  buttons, blue status LED and IR receiver. The status LED is located under the symbol window which can be taken off. The functions of each of the button can be triggered using an IR remote control. The push-button is pre-programmed for operation with a Schneider-Electric IR remote control Distance. Many other IR remote controls (e.g. existing TV or CD player remote controls) can be taught into the push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/ dual-surface), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions. Transmitter: IR remote control Distance, art. no. MTN0. Contents: With fixing frame and claws. With bus connecting terminal.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Binary inputs

    KNX

    Binary inputs

    Binary inputs
    Push-button interface, 2-gang plus Binary input REG-K/4x10

    Version polar white

    Art. no. MTN670802

    Version light grey

    Art. no. MTN644492

    Generates an internal signal voltage for connecting two conventional push-buttons or floating contacts, and for connecting two low-current LEDs. The cores are 0 cm long and can be extended to max. . m. For installation in a conventional 0 mm switch box. KNX software functions: Switching, dimming or controlling blinds via  or  inputs, position values for blind control (-bit), pulse edges with -, -, -, or -bit telegrams, differentiation between short and long activation, initialisation telegram, cyclical transmission, pulse edges with -byte telegrams, -bit linear regulator, scenes, counter, disable function, break contact/ make contact, debounce time. Outputs for connecting control lamps (low-current LEDs) for the status display. For each input/output object type:Contact voltage: <  V (SELV) Contact current: < 0. mA Output current: max.  mA Max. cable length: 0 cm unshielded, can be extended up to max. . m with twisted unshielded cable. Dimensions: approx. 0x0.x. mm (LxWxH)

    For connecting four conventional push-buttons or floating contacts to the KNX. Internally generates a signal voltage SELV, electrically isolated from the bus. With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded. KNX software functions: Switching, dimming or blind control via  or  inputs. Positioning values for blind control (-bit). Pulse edges with -, -, -, or -bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse edges with -byte telegrams. -bit linear regulator. Disable function. Break/make contact. Debounce time. Inputs:  Contact voltage: max. 0 V, clocked Contact current: max.  mA, pulsing Cable length: max. 0 m Device width: . modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    Push-button interface, 4-gang plus

    Binary input REG-K/8x10

    Version polar white

    Art. no. MTN670804

    Version light grey

    Art. no. MTN644592

    Generates an internal signal voltage for connecting four conventional push-buttons or floating contacts, and for connecting four low-current LEDs. The cores are 0 cm long and can be extended to max. . m. For installation in a conventional 0 mm switch box. KNX software functions: Switching, dimming or controlling blinds via  or  inputs, position values for blind control (-bit), pulse edges with -, -, -, or -bit telegrams, differentiation between short and long activation, initialisation telegram, cyclical transmission, pulse edges with -byte telegrams, -bit linear regulator, scenes, counter, disable function, break contact/ make contact, debounce time. Outputs for connecting control lamps (low-current LEDs) for the status display. For each input/output object type:Contact voltage: <  V (SELV) Contact current: < 0. mA Output current: max.  mA Max. cable length: 0 cm unshielded, can be extended up to max. . m with twisted unshielded cable. Dimensions: approx. 0x0.x. mm (LxWxH)

    For connecting eight conventional push-buttons or floating contacts to the KNX. Internally generates a signal voltage SELV, electrically isolated from the bus. With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded. KNX software functions: Switching, dimming or blind control via  or  inputs. Positioning values for blind control (-bit). Pulse edges with -, -, -, or -bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse edges with -byte telegrams. -bit linear regulator. Disable function. Break/make contact. Debounce time. Inputs:  Contact voltage: max. 0 V, clocked Contact current: max.  mA, pulsing Cable length: max. 0 m Device width:  modules = approx. 0 mm Contents: With bus connecting terminal and cable cover.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Binary inputs

    KNX

    Binary inputs

    Binary input REG-K/4x24

    Binary input REG-K/4x230

    Version light grey

    Art. no. MTN644892

    Version light grey

    Art. no. MTN644992

    For connecting four conventional devices with AC/DC  V outputs to the KNX. With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded. KNX software functions: Switching, dimming or blind control via  or  inputs. Positioning values for blind control (-bit). Pulse edges with -, -, -, or -bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse edges with -byte telegrams. -bit linear regulator. Disable function. Break/make contact. Debounce time. Input voltage: AC / DC  V Inputs:  Input current: DC  mA (0 V), AC  mA ( V) 0 signal: 5 V 1 signal: 11 V Cable length: max. 00 m Device width: . modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    For connecting four conventional devices with AC 0 V outputs to the KNX. With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded. KNX software functions: Switching, dimming or blind control via  or  inputs. Positioning values for blind control (-bit). Pulse edges with -, -, -, or -bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse edges with -byte telegrams. -bit linear regulator. Disable function. Break/make contact. Debounce time. Input voltage: AC 0 V, 0-0Hz Inputs:  Input current: AC  mA 0 signal: 40 V 1 signal: 160 V Cable length: max. 00 m Device width: . modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    Binary input REG-K/8x24

    Binary input REG-K/8x230

    Version light grey

    Art. no. MTN644792

    Version light grey

    Art. no. MTN644692

    For connecting  conventional devices with AC/DC  V outputs to KNX. With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded. KNX software functions: Switching, dimming or blind control via  or  inputs. Positioning values for blind control (-bit). Pulse edges with -, -, -, or -bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse edges with -byte telegrams. -bit linear regulator. Disable function. Break/make contact. Debounce time. Input voltage: AC/DC V Inputs:  Input current: DC approx.  mA/AC approx.  mA Line length: max. 00 m Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    For connecting eight conventional devices with AC 0 V outputs to the KNX. With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded. KNX software functions: Switching, dimming or blind control via  or  inputs. Positioning values for blind control (-bit). Pulse edges with -, -, -, or -bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse edges with -byte telegrams. -bit linear regulator. Disable function. Break/make contact. Debounce time. Input voltage: AC 0V, 0-0Hz Inputs:  Input current: AC approx.  mA Line length: max. 00 m Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Movement detector

    KNX

    Movement detector

    Movement detectors
    KNX ARGUS 220

    Movement detectors System M, Artec, Trancent, Antique


    KNX ARGUS 180, flush-mounted KNX ARGUS 180, flush-mounted

    Version polar white dark brazil aluminium

    Art. no. MTN632519 MTN632515 MTN632569 Version Art. no. MTN631619 MTN631625 Version Art. no. MTN631844 MTN631819 MTN631860

    n white, polar
    glossy glossy

    nwhite npolar white naluminium

    n white, active

    KNX movement detector for outdoors. Potentiometers for setting functions are located underneath the cover plate. With integrated bus coupler. A programming magnet is necessary to program the physical address. KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. Normal operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Self-adjusting staircase timer. Angle of detection: 0 Range: max.  m Number of levels:  Number of zones:  with  switching segments Light sensor: infinitely variable from approx. 3 - 1000 lux, lux (infinite: movement detection is independent of the position of the sensor head) Time: can be set externally from  s to approx.  min. in  levels or via ETS from approx.  s to approx.  hours Sensitivity: infinitely adjustable Possible settings for sensor head:Wall mounting:  up,  down,  left/right,  axial Ceiling mounting:  up,  down,  left/right, . axial EC directives: Low-voltage guideline //EEC and EMC directive //EEC Type of protection: IP  Accessories: Mounting bracket, art. no. MTN. Programming magnet, art. no. MTN0. Contents: With cover plate and segments to limit the area of detection, screws and plugs.

    nanthracite naluminium

    MTN632614 MTN632660

    n varnished stainless steel

    MTN631846

    For System M. Movement detector for indoors. When a movement is detected, a data telegram defined by the programming is transmitted. With integrated bus coupling unit. KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. Normal operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Self-adjusting staircase timer. Angle of detection: 0 Range:  m (for mounting height of . m) Number of levels:  Number of zones:  Sensitivity: infinitely adjustable (ETS or potentiometer) Light sensor: infinitely adjustable from approx. 0 to 000 Lux (ETS or potentiometer) Time: adjustable in steps from  s to  min (potentiometer) or adjustable from  s to  hours (ETS) EC Directives: Low-voltage guideline // EEC and EMC guideline //EEC Contents: With bus connecting terminal and supporting plate.

    For Artec, Trancent, Antique. Movement detector for indoors. When a movement is detected, a data telegram defined by the programming is transmitted. With integrated bus coupling unit. KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. Normal operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Self-adjusting staircase timer. Angle of detection: 0 Range:  m (for mounting height of . m) Number of levels:  Number of zones:  Sensitivity: infinitely adjustable (ETS or potentiometer) Light sensor: infinitely adjustable from approx. 0 to 000 Lux (ETS or potentiometer) Time: adjustable in steps from  s to  min (potentiometer) or adjustable from  s to  hours (ETS) EC Directives: Low-voltage guideline // EEC and EMC guideline //EEC Contents: With bus connecting terminal and supporting plate.

    0

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Movement detector

    KNX

    Movement detector

    Movement detectors Altira


    KNX ARGUS 180/2.20 m flush-mounted KNX Movement detector 180

    Version

    Art. no. MTN631719 MTN631725 MTN632714 MTN632760

    Version

    Art. no. ALB45153 ALB46153

    n white, polar
    glossy glossy

    nwhite naluminium

    n white, active nanthracite naluminium

    For System M. Indoor movement detector with anti-crawl protection. When a movement is detected, a data telegram defined by the programming is transmitted. With integrated bus coupling unit. For wall mounting in a size 0 mounting box, optimal installation at . m. KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. Normal operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Two movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Angle of detection: 0 Range:  m right/left,  m to the front (for a mounting height of .0 m) Mounting height: . m or . m with half the range Number of levels:  Number of zones:  Number of movement sensors: , sector-orientated, adjustable Sensitivity: infinitely adjustable (ETS or potentiometer) Light sensor: infinitely adjustable from approx. 10 to 2000 Lux (ETS or potentiometer) Time: adjustable in steps from  s to  min (potentiometer) or adjustable from  s to  hours (ETS) EC Directives: Low-voltage guideline //EEC and EMC guideline //EEC Contents: With bus connecting terminal and supporting plate. With cover segments to limit the area of detection.

     modules Movement detector for indoors. When a movement is detected, a data telegram defined by the programming is transmitted. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. Normal operation and surveillance operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Two movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Angle of detection: 0 Number of movement sensors: , sector-orientated, adjustable (ETS) Recommended mounting height:  m to , m Range: at . m mounting height: Approx.  m on all sides, adjustable in 0 steps (rotary switch or ETS) Detection brightness: Infinite setting from approx. 10 lux to approx.1000 lux (rotary switch) or from 0 lux to 000 lux (ETS) Overshoot time: Adjustable in  steps from approx.  s to approx.  min (rotary switch) or adjustable from  s to  hours (ETS) EC guidelines: Low-voltage guideline 00//EEC and EMC guideline 00/0/EC Contents: With bus connecting terminal.

    Movement detectors Unica


    KNX Movement detector 180

    Version

    Art. no. MGU3.533.18 MGU3.533.25

    nwhite nivory

     modules In Unica design. Movement detector for indoors. When a movement is detected, a data telegram defined by the programming is transmitted. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. Normal operation and surveillance operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Two movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Angle of detection: 0 Number of movement sensors: , sector-orientated, adjustable (ETS) Recommended mounting height:  m to , m Range: at . m mounting height: Approx.  m on all sides, adjustable in 0 steps (rotary switch or ETS) Detection brightness: Infinite setting from approx. 10 lux to approx.1000 lux (rotary switch) or from 0 lux to 000 lux (ETS) Overshoot time: Adjustable in  steps from approx.  s to approx.  min (rotary switch) or adjustable from  s to  hours (ETS) EC guidelines: Low-voltage guideline 00//EEC and EMC guideline 00/0/EC Contents: With bus connecting terminal.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Movement detector

    KNX

    Movement detector

    Movement detectors Unica Top


    KNX Movement detector 180 KNX Movement detector 180

    Version

    Art. no. MGU5.533.18 MGU5.533.25

    Version

    Art. no. MGU3.533.30 MGU3.533.12

    nwhite nivory

    naluminium ngraphite

     modules In Unica design. Movement detector for indoors. When a movement is detected, a data telegram defined by the programming is transmitted. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. Normal operation and surveillance operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Two movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Angle of detection: 0 Number of movement sensors: , sector-orientated, adjustable (ETS) Recommended mounting height:  m to , m Range: at . m mounting height: Approx.  m on all sides, adjustable in 0 steps (rotary switch or ETS) Detection brightness: Infinite setting from approx. 10 lux to approx.1000 lux (rotary switch) or from 0 lux to 000 lux (ETS) Overshoot time: Adjustable in  steps from approx.  s to approx.  min (rotary switch) or adjustable from  s to  hours (ETS) EC guidelines: Low-voltage guideline 00//EEC and EMC guideline 00/0/EC Contents: With fixing frame. With bus connecting terminal.

     modules In Unica Top design. Movement detector for indoors. When a movement is detected, a data telegram defined by the programming is transmitted. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. Normal operation and surveillance operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Two movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Angle of detection: 0 Number of movement sensors: , sector-orientated, adjustable (ETS) Recommended mounting height:  m to , m Range: at . m mounting height: Approx.  m on all sides, adjustable in 0 steps (rotary switch or ETS) Detection brightness: Infinite setting from approx. 10 lux to approx.1000 lux (rotary switch) or from 0 lux to 000 lux (ETS) Overshoot time: Adjustable in  steps from approx.  s to approx.  min (rotary switch) or adjustable from  s to  hours (ETS) EC guidelines: Low-voltage guideline 00//EEC and EMC guideline 00/0/EC Contents: With bus connecting terminal.

    KNX Movement detector 180

    KNX Movement detector 180

    Version

    Art. no. MGU50.533.18 MGU50.533.25

    Version

    Art. no. MGU5.533.30 MGU5.533.12

    nwhite nivory

    naluminium ngraphite

     modules In Unica design. Movement detector for indoors. When a movement is detected, a data telegram defined by the programming is transmitted. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. Normal operation and surveillance operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Two movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Angle of detection: 0 Number of movement sensors: , sector-orientated, adjustable (ETS) Recommended mounting height:  m to , m Range: at . m mounting height: Approx.  m on all sides, adjustable in 0 steps (rotary switch or ETS) Detection brightness: Infinite setting from approx. 10 lux to approx.1000 lux (rotary switch) or from 0 lux to 000 lux (ETS) Overshoot time: Adjustable in  steps from approx.  s to approx.  min (rotary switch) or adjustable from  s to  hours (ETS) EC guidelines: Low-voltage guideline 00//EEC and EMC guideline 00/0/EC Contents: With fixing frame and claws. With bus connecting terminal.

     modules In Unica Top design. Movement detector for indoors. When a movement is detected, a data telegram defined by the programming is transmitted. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. Normal operation and surveillance operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Two movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Angle of detection: 0 Number of movement sensors: , sector-orientated, adjustable (ETS) Recommended mounting height:  m to , m Range: at . m mounting height: Approx.  m on all sides, adjustable in 0 steps (rotary switch or ETS) Detection brightness: Infinite setting from approx. 10 lux to approx.1000 lux (rotary switch) or from 0 lux to 000 lux (ETS) Overshoot time: Adjustable in  steps from approx.  s to approx.  min (rotary switch) or adjustable from  s to  hours (ETS) EC guidelines: Low-voltage guideline 00//EEC and EMC guideline 00/0/EC Contents: With fixing frame. With bus connecting terminal.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Movement detector

    KNX

    Movement detector

    KNX Movement detector 180

    KNX ARGUS Presence

    Version

    Art. no. MGU50.533.30 MGU50.533.12

    Version polar white aluminium

    Art. no. MTN630819 MTN630860

    naluminium ngraphite

     modules In Unica Top design. Movement detector for indoors. When a movement is detected, a data telegram defined by the programming is transmitted. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. Normal operation and surveillance operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Two movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Angle of detection: 0 Number of movement sensors: , sector-orientated, adjustable (ETS) Recommended mounting height:  m to , m Range: at . m mounting height: Approx.  m on all sides, adjustable in 0 steps (rotary switch or ETS) Detection brightness: Infinite setting from approx. 10 lux to approx.1000 lux (rotary switch) or from 0 lux to 000 lux (ETS) Overshoot time: Adjustable in  steps from approx.  s to approx.  min (rotary switch) or adjustable from  s to  hours (ETS) EC guidelines: Low-voltage guideline 00//EEC and EMC guideline 00/0/EC Contents: With fixing frame and claws. With bus connecting terminal.

    KNX presence detector


    KNX ARGUS Presence Basic

    Presence detection indoors. If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device constantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS. With integrated bus coupling unit. For ceiling mounting in a size 0 mounting box, optimal installation at . m. Can also be mounted to ceilings using the surface mounting housing for ARGUS Presence. KNX software functions: Five movement/presence blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. Normal operation, master, slave, monitoring, safety pause, disable function. Four movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Actual brightness value: can be detected via the internal and/or an external light sensor. Actual value correction. Angle of detection: 0 Range: a radius of max.  m (at a mounting height of .0 m) Number of levels:  Number of zones:  with  switching segments Number of movement sensors: , separately adjustable Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNX EC Directives: Low-voltage guideline //EEC and EMC guideline //EEC Accessories: Surface-mounted housing for Argus Presence, art. no. MTN0. Contents: With bus connecting terminal and supporting plate.

    Version polar white aluminium

    Art. no. MTN630719 MTN630760

    Presence detection indoors. If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device constantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS. With integrated bus coupling unit. For ceiling mounting in a size 0 mounting box, optimal installation at . m. Can also be mounted to ceilings using the surface mounting housing for ARGUS Presence. KNX software functions: Two movement/presence blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. Normal operation (no master/slave), safety pause, disable function. Self-adjusting staircase timer. Actual brightness value: can be specified via the internal and/or an external light sensor. Angle of detection: 0 Range: a radius of max.  m (at a mounting height of .0 m) Number of levels:  Number of zones:  with  switching segments Number of movement sensors:  Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNX EC Directives: Low-voltage guideline //EEC and EMC guideline //EEC Accessories: Surface-mounted housing for Argus Presence, art. no. MTN0. Contents: With bus connecting terminal and supporting plate.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Movement detector

    KNX

    Movement detector

    KNX ARGUS Presence with light control and IR receiver

    KNX ARGUS Presence 180/2.20 m flush-mounted

    Version polar white aluminium

    Art. no. MTN630919 MTN630960

    Version

    Art. no. MTN630419 MTN630425 MTN630614 MTN630660

    n white, polar
    glossy glossy

    Presence detection indoors. If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device constantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS. Light control enables the required brightness in a room to be achieved permanently. Dimming and the optional use of a second lighting group maintains a constant brightness. Individual ARGUS Presence configurations can be changed or other KNX devices can be controlled remotely using the IR receiver. With integrated bus coupling unit. For ceiling mounting in a size 0 mounting box, optimal installation at . m. Can also be mounted to ceilings using the surface mounting housing for ARGUS Presence. KNX software functions: Five movement/presence blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. An additional light control block: brightness can be maintained constant by dimming and an additional adjustable level. IR receiver function. IR configuration: setting the brightness threshold, staircase timer factors or range. Normal operation, master, slave, monitoring, safety pause, disable function. Four movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Actual brightness value: can be detected via the internal and/or an external light sensor. Actual value correction. Angle of detection: 0 Range: a radius of max.  m (at a mounting height of .0 m) Number of levels:  Number of zones:  with  switching segments Number of movement sensors: , separately adjustable Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNX Number of IR channels: 10 for controlling KNX devices, 10 for configuration EC Directives: Low-voltage guideline //EEC and EMC guideline //EEC Accessories: Surface-mounted housing for Argus Presence, art. no. MTN0. Transmitter: IR remote control Distance, art. no. MTN0. Contents: With bus connecting terminal and supporting plate.

    n white, active nanthracite naluminium

    For System M. Presence detection indoors. If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device constantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS. With integrated bus coupling unit. For wall mounting in a size 0 mounting box, optimal installation at . m. With anti-crawl protection. KNX software functions: Five movement/presence blocks: up to four functions can be triggered per block. Telegrams:  bit,  byte,  bytes. Normal operation, master, slave, monitoring, safety pause, disable function. Two movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Actual brightness value: can be detected via the internal and/or an external light sensor. Actual value correction. Angle of detection: 0 Range:  m right/left,  m to the front (for a mounting height of .0 m) Mounting height: . m or . m at half the range Time: adjustable in steps from  s to  min (potentiometer) or adjustable from  s to  hours (ETS) Number of levels:  Number of zones:  Number of movement sensors: , separately adjustable Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNX EC Directives: Low-voltage guideline //EEC and EMC guideline //EEC Contents: With bus connecting terminal and supporting plate. With cover segments to limit the area of detection.

    Surface-mounted housing for ARGUS Presence

    Version polar white

    Art. no. MTN550619

    The surface-mounted housing for ARGUS Presence devices also allows them to be surface mounted.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Other sensors

    KNX

    Other sensors

    Other sensors
    Analogue input REG-K 4-gang KNX Basic weather station

    Version light grey

    Art. no. MTN682191

    Version polar white

    Art. no. MTN663990

    The analogue input records and processes analogue sensor signals. Up to four analogue sensors can be connected in any combination. In connection with the analogue input module REG/-gang,  analogue inputs are available, to which the connection is made using the sub-bus. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. Evaluation and limit value processing is performed in the analogue input. With continuity checking of the  ... 0 mA inputs. Auxiliary voltage: AC  V (+/-0 %) Analogue inputs:  Current interface: 0 ... 0 mA,  ... 0 mA Voltage interface: 0 ...  V, 0 ... 0 V Outputs: DC  V, 00 mA Continuity checking:  ... 0 mA Device width:  modules = approx.  mm Accessories: Analogue input module REG/-gang, art. no. MTN. Power supply REG, AC  V /  A, art. no. MTN. Contents: With bus connecting terminal and cable cover.

    Analogue input module REG/4-gang

    The KNX Basic weather station records weather data, analyses these and can transmit them to the bus. The device has a wind sensor, precipitation sensor, temperature sensor and brightness sensor. Wind, brightness and temperature are each sent as a -byte value, rain as -byte. Wind can be sent either in m/s or km/h.  universal channels for single tasks or logic operations. Four logic functions per channel are possible.  sun protection channels for external blinds/roller shutter control. For example, this makes sun protection for up to three facades possible. Objects for: twilight threshold, brightness threshold, drive control, automatic sun function, teaching, security. Automatic sun protection. Controls the blinds automatically during the day. Teaching object. With this, every brightness threshold can be reset by the touch of a key. Integrated heating for rain sensor. Suitable for mounting on an outside wall or with optional accessories on a corner or on a mast. With integrated bus coupler. The bus is connected using a bus connecting terminal. An additional AC 0 V power supply is required for the heating unit. Power supply: AC 0 V Power consumption: max. 0 mA with bus voltage Power consumption: 0 W with heating Sensors:  Measuring range: - 0 C to +  C Brightness range:  to 00,000 lux Angle of detection: 0 Type of protection: IP  per EN 0 Dimensions: 0 x 0 x  mm Accessories: Mast and corner fastening for KNX Basic weather station, art. no. MTN.

    Version light grey

    Art. no. MTN682192 Mast and corner fastening for KNX Basic weather station

    Extension module to extend weather station REG-K/-gang and analogue input REG-K/ -gang from  to  analogue outputs. Connections are made using the sub-bus. Up to four analogue sensors can be connected in any combination. For installation on DIN rails EN 00. Evaluation and limit value processing is performed in the analogue input or weather station. With continuity checking of the  ... 0 mA inputs. Auxiliary voltage: AC  V (+/-0 %) Rating: max.  VA Analogue inputs:  Current interface: 0 ... 0 mA,  ... 0 mA Voltage interface: 0 ...  V, 0 ... 0 V (DC) A/D conversion:  bit Outputs: DC  V, 00 mA Continuity checking:  ... 0 mA Device width:  modules = approx.  mm Accessories: Power supply REG, AC  V /  A, art. no. MTN. Contents: With sub-bus jumper.

    Version

    Art. no. MTN663992

    0

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Other sensors

    KNX

    Other sensors

    KNX brightness and temperature sensor

    Weather station REG-K/4-gang

    Version light grey

    Art. no. MTN663991

    Version light grey

    Art. no. MTN682991

    The sensor records brightness and temperature and transmits these values to the bus. It has a temperature sensor and a brightness sensor.  universal channels for single tasks or logic operations. Temperature and brightness threshold in any combination. Sun protection channel for blinds/roller shutter control. Objects for: twilight threshold, brightness threshold, drive control, automatic sun function, teaching, security. Automatic sun protection. Controls the blinds automatically during the day. Teaching object. With this, every brightness threshold can be reset by the touch of a key. Suitable for mounting on an outside wall. With integrated bus coupler. The bus is connected using a bus connecting terminal. Power consumption: max. 0 mW Sensors:  Temperature measurement range: -  C to +  C ( % or  degree) Brightness measurement range:  to 00,000 lux (0% or  lux) Type of protection: IP  according to DIN EN 0 for vertical installation with cover Dimensions: 0 x  x  mm

    The weather station records and processes analogue sensor signals such as wind speed, brightness, twilight, precipitation and a DCF- signal. Up to four analogue sensors and the DCF- weather combi-sensor can be connected in any combination. In connection with the -gang analogue input module,  analogue inputs are available, to which the connection is made using the sub-bus. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. If DCF-77 weather combi-sensors are used, it is possible to access a pre-configured setting in the software. The measured values are converted by the weather station into  byte /  byte telegrams (EIS / value). This enables bus devices (visualisation software, measured value displays) to access the control processes, generate signals or control weather-dependent processes. Programming is performed using the ETS tool for the weather station. Two limit values per sensor (not for rain) Connection of multiple wind sensors  signals can be evaluated Evaluation of DCF- time signal (date and time) Astro function Logic operation controller for application of limit-value-dependent actions (even external) Shading of individual faade segments Signal monitoring of the combi-sensors with object for the following protective measures Checking the wind signal for conclusiveness with object for the following protective measures Selective faade shading (for  faades) with adjustment of the basic brightness, faade alignment, angle of opening relative to the sun. External objects for intervention in basic brightness, angle of opening and limit values Alarm byte Continuity monitoring with report on the bus Auxiliary voltage: AC  V (+/-0 %) Analogue inputs:  Current interface: 0 ... 0 mA,  ... 0 mA Voltage interface: 0 ...  V, 0 ... 0 V Outputs: DC  V, 00 mA Device width:  modules = approx.  mm Accessories: Analogue input module REG/-gang, art. no. MTN. Weather combi-sensor/DCF-, art. no. MTN. Power supply REG, AC  V /  A, art. no. MTN. Contents: With bus connecting terminal and cable cover.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Other sensors

    KNX

    Other sensors

    Weather combi-sensor DCF-77

    Year time switch REG-K/4/324 DCF-77

    Version black

    Art. no. MTN663692

    Version light grey

    Art. no. MTN677029

    The weather combi-sensor includes a wind sensor, precipitation sensor, twilight sensor and three brightness sensors (East, South, West). With integral DCF- receiver, antenna rotatable through . Suitable for external installation on a wall or on a mast. The sensor is connected to a weather station REG-K/-gang. The weather data is evaluated in the weather station. The necessary power supplies are provided by the weather station with connected power supply REG. Power supply: AC  V (+/-  %) Power consumption: max. 00 mA (with heating) Sensors:  Wind speed: 1 ... 40 m/s ( 0.5 m/s) Brightness: 0 ... 0 klux (+/- 0 %) Twilight 0 ... 0 lux Type of protection: IP  when installed Temperature range: - 0 C ... + 0 C (non-icing) Fixing method: Mounting bracket Dimensions: 0x00 mm (xH)

    Time switch
    Year time switch REG-K/4/324

    Version light grey

    Art. no. MTN677129

    -channel year time switch with power supply unit and integrated DCF receiver. To be completed with the DCF- antenna for radio-controlled time synchronisation. Time and date can be issued on the bus. The device can be programmed manually on the device itself or on the PC using the software. With bus coupler. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. After programming on the PC, all switching times are exported to a memory chip available as an accessory, and transmitted from this into one or more time switches.  non-volatile switching times for selectable daily, weekly and date commands, impulse commands x switching operation for holiday/public holidays 0 weekly programs for holidays and public holidays per channel Free formation of channel and weekday blocks Manual switching is possible via preselection and permanent switches Random program can be activated High reserve power Automatic changeover between summer and winter time Automatic time synchronisation with DCF possible KNX software functions: Switching. Dimming. Send time and date. Scene. Priority. Operating voltage: Bus, DC  V AC 0 V 0%, 0-0 Hz for antenna Accuracy: 1s/day Reserve power: . years at full operability. Data backup in disconnected state approx. 0 years (EEPROM) Type of protection: IP 0 Device width:  modules = approx. 0 mm Accessories: DCF antenna, art. no. MTN0. Obelisk software, art. no. MTN0. Memory chip for year time switches, art. no. MTN0.

    Quartz-controlled four-channel year time switch. The device can be programmed manually on the device itself or on the PC using the software. With bus coupler. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. After programming on the PC, all switching times are exported to a memory chip available as an accessory, and transmitted from this into one or more time switches.  non-volatile switching times for selectable daily, weekly and date commands, impulse commands x switching operation for holiday/public holidays 0 weekly programs for holidays and public holidays per channel Free formation of channel and weekday blocks Manual switching is possible via preselection and permanent switches Random program can be activated Operation with mains connection possible High reserve power Quarz-controlled Automatic changeover between summer and winter time KNX software functions: Switching. Dimming. Send time and date. Scene. Priority. Operating voltage: Bus, DC  V Accuracy: 1 s/day Reserve power: . years at full operability. Data backup in disconnected state approx. 0 years (EEPROM) Type of protection: IP 0 Device width:  modules = approx. 0 mm Accessories: Obelisk software, art. no. MTN0. Memory chip for year time switches, art. no. MTN0.

    KNX timer REG-K

    Version light grey

    Art. no. MTN677290

    The timer sends time and date to the bus and can be operated with or without a DCF antenna. Automatic changeover between summer and winter time (can be switched off) Own adjustable changeover rule The data can be sent periodically or on request Lithium cell: time stays the same in the event of loss of bus power Accuracy:  s/day, the application allows additional adjustment Reserve power: 0 years Antenna line length: max. 00 m Type of protection: IP 0 EC directives: Low-voltage guideline //EEC and EMC directive //EEC Device width:  modules = approx.  mm Accessories: DCF antenna, art. no. MTN0.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Other sensors

    KNX

    Switch actuators

    Switch actuators
    DCF77 antenna Switch actuator, flush-mounted/230/16

    Version light grey

    Art. no. MTN668091

    Version polar white

    Art. no. MTN629993

    Antenna for receiving the time by radio signal. The antenna should be connected to a year time switch REG-K// DCF-. Type of protection: IP  Contents: With mounting bracket.

    OBELISK software

    Version

    Art. no. MTN615034

    For switching a load via a make contact. With integrated bus coupler and screw terminals. The device is connected to the bus with a bus connecting terminal. The actuator can be built into a 47 mm ceiling socket with hook or a flush-mounted switch box. KNX software functions: Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour. Nominal voltage: AC 0 V, 0-0 Hz Nominal current:  A, ohmic load 0 A, cos = 0. Nominal outputIncandescent lamps: AC 0 V, max. 00 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps: AC 0 V, max. 000 VA with parallel compensation Capacitive load: AC 0 V, max. 0 F Contents: With bus connecting terminal.

    Software for convenient entry of the switching times for the year time switches REG-K// on a PC. With adapter for the serial interface to load the program to the memory chip. System requirements: IBM-compatible,  or higher, Windows ,  Contents: With adapter and a memory chip.

    Switch actuator REG-K/2x230/10 with manual mode

    Memory chip for year time switches

    Version light grey

    Art. no. MTN649202

    Version

    Art. no. MTN668092

    EEPROM memory chip for  switching times for programming the year time switch REG K//. The program which is created with the software is loaded into the memory chip and can then be imported into one or several year time switches.

    For independent switching of up to  loads via make contacts. The function of the switching channels is freely configurable. All switching outlets can be operated manually using push-button operation. With integrated bus coupler. For installation on DIN rails EN 00. Bus connection is via bus terminals, a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation. KNX software functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function. Disable function. Logic operation or priority control. Status feedback function for each channel. Power supply: Nominal voltage: AC 0 V, 0-0 Hz For each switch output: Nominal current: 0 A, cos = ; 0 A, cos = 0. Incandescent lamps: AC 0 V, max. 000 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps: AC 0 V, max. 00 W, uncompensated AC 0 V, max. 000 W with parallel compensation Capacitive load: AC 0 V, max. 0 F Device width: . modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Switch actuators

    KNX

    Switch actuators

    Switch actuator REG-K/2x230/16 with manual mode

    Switch actuator REG-K/4x230/10 with manual mode

    Version light grey

    Art. no. MTN647393

    Version light grey

    Art. no. MTN649204

    For independent switching of two loads via make contacts. With integrated bus coupler and screw terminals. For installation on DIN rails EN 00. The 0 V switch output can be operated with a manual switch. The bus is connected using a bus connecting terminal; a data rail is not necessary. A green LED indicates readiness for operation after the application has been loaded. KNX software functions: Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour. Nominal voltage: AC 0 V, 0-0 Hz For each switching contact: Nominal current:  A, cos = 0. Incandescent lamps: AC 0 V, max. 00 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps: AC 0 V, max. 00 VA Capacitive load: AC 0 V,  A, max. 00 F Device width: . modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    For independent switching of up to  loads via make contacts. The function of the switching channels is freely configurable. All switching outlets can be operated manually using push-button operation. With integrated bus coupler. For installation on DIN rails EN 00. Bus connection is via bus terminals, a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation. KNX software functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function. Disable function. Logic operation or priority control. Status feedback function for each channel. Power supply: Nominal voltage: AC 0 V, 0-0 Hz For each switch output: Nominal current: 0 A, cos = ; 0 A, cos = 0. Incandescent lamps: AC 0 V, max. 000 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps:AC 0 V, max. 00 W, uncompensated AC 0 V, max. 000 W with parallel compensation Capacitive load: AC 0 V, max. 0 F Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    Switch actuator REG-K/2x230/16 with manual mode and current detection Switch actuator REG-K/4x230/16 with manual mode

    Version light grey

    Art. no. MTN647395 Version light grey Art. no. MTN647593

    For independent switching of two loads via make contacts. The actuator has integrated current detection that measures the load current on each channel. All 0 V switch outputs can be operated with manual switches. With integrated bus coupling unit. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. A green LED indicates that the device is ready for operation once the application has been loaded. The load is connected with screw terminals. KNX software functions: Operation as break contact or make contact. Staircase lighting function with/without manual OFF function and switch-off warning. Delay functions. Scenes. Logic function. Blocking or priority control. Feedback function. Status. Central function with delay. Parameterisation for bus voltage failure and recovery. Behaviour for download. Current detection function: Behaviour when value exceeds/falls short of the threshold value. Energy, operating and switch on counter with limit value monitoring. Flash function. Nominal voltage: AC 0 V, 0 - 0 Hz Per switching contact: Nominal current:  A, cos = 0. Incandescent lamps: AC 0 V, max. 00 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps: AC 0 V, max. 00 VA, with parallel compensation Capacitive load: AC 0 V,  A, max. 00 F Motor load: AC 0 V, max. 000 W Current detection load current: Detection range: 0. A to  A (sine effective value or DC) Sensing accuracy: +/- % of the current value at hand (sine) and +/- 00 mA Frequency: 0/0 Hz Description: 00 mA Device width: . modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    For independent switching of four loads via make contacts. With integrated bus coupler  and screw terminals. For installation on DIN rails EN 00. The 0 V switch output can be operated with a manual switch. The bus is connected using a bus connecting terminal; a data rail is not necessary. A green LED indicates readiness for operation after the application has been loaded. KNX software functions: Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour. Nominal voltage: AC 0 V, 0-0 Hz For each switching contact: Nominal current:  A, cos = 0, Incandescent lamps: AC 0 V, max. 00 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps: AC 0 V, max. 00 VA Capacitive load: AC 0 V,  A, max. 00 F Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Switch actuators

    KNX

    Switch actuators

    Switch actuator REG-K/4x230/16 with manual mode and current detection

    Switch actuator REG-K/8x230/10 with manual mode

    Version light grey

    Art. no. MTN647595

    Version light grey

    Art. no. MTN649208

    For independent switching of four loads via make contacts. The actuator has integrated current detection that measures the load current on each channel. All 0 V switch outputs can be operated with manual switches. With integrated bus coupling unit. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. A green LED indicates that the device is ready for operation once the application has been loaded. The load is connected with screw terminals. KNX software functions: Operation as break contact or make contact. Staircase lighting function with/without manual OFF function and switch-off warning. Delay functions. Scenes. Logic function. Blocking or priority control. Feedback function. Status. Central function with delay. Parameterisation for bus voltage failure and recovery. Behaviour for download. Current detection function: Behaviour when value exceeds/falls short of the threshold value. Energy, operating and switch on counter with limit value monitoring. Flash function. Nominal voltage: AC 0 V, 0 - 0 Hz Per switching contact: Nominal current:  A, cos = 0. Incandescent lamps: AC 0 V, max. 00 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps: AC 0 V, max. 00 VA, with parallel compensation Capacitive load: AC 0 V,  A, max. 00 F Motor load: AC 0 V, max. 000 W Current detection load current: Detection range: 0. A to  A (sine effective value or DC) Sensing accuracy: +/- % of the current value at hand (sine) and +/- 00 mA Frequency: 0/0 Hz Description: 00 mA Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    For independent switching of up to  loads via make contacts. The function of the switching channels is freely configurable. All switching outlets can be operated manually using push-button operation. With integrated bus coupler. For installation on DIN rails EN 00. Bus connection is via bus terminals, a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation. KNX software functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function. Disable function. Logic operation or priority control. Status feedback function for each channel. Power supply: Nominal voltage: AC 0 V, 0-0 Hz For each switch output: Nominal current: 0 A, cos = ; 0 A, cos = 0. Incandescent lamps: AC 0 V, max. 000 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps:AC 0 V, max. 00 W, uncompensated AC 0 V, max. 000 W with parallel compensation Capacitive load: AC 0 V, max. 0 F Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    Switch actuator REG-K/8x230/16 with manual mode

    Switch actuator REG-K/8x230/6

    Version light grey

    Art. no. MTN647893

    Version light grey

    Art. no. MTN646808

    For independent switching of eight loads via make contacts. With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. A green LED indicates readiness for operation after the application has been loaded. KNX software functions: Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour. Nominal voltage: AC 0 V, 0-0 Hz For each switching contact: Nominal current:  A, cos = 0. Incandescent lamps: AC 0 V, max. 0 W Halogen lamps: AC 0 V, max. 0 W Fluorescent lamps: AC 0 V, max. 000 VA Capacitive load: AC 0 V,  A, max. 0 F Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    For independent switching of  loads via make contacts. All 0 V switch outputs can be operated with manual switches. With integrated bus coupler. For installation on DIN rails EN 00. The device is connected to the mains via screw terminals; every second L connection is bridged internally. The bus is connected using a bus connecting terminal; a data rail is not necessary. A green LED indicates readiness for operation after the application has been loaded. KNX software functions: Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour. Nominal voltage: AC 0 V, 0-0 Hz Per switch contact: Nominal current:  A, cos =0. Incandescent lamps: AC 0 V, max. 00 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps: AC 0 V, max. 00 VA Capacitive load: AC 0 V,  A, max. 00 F Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    0

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Switch actuators

    KNX

    Switch actuators

    Switch actuator REG-K/8x230/16 with manual mode and current detection

    Switch actuator REG-K/12x230/16, with manual mode

    Version light grey

    Art. no. MTN647895

    Version light grey

    Art. no. MTN648493

    For independently switching  loads via make contacts. The actuator has integrated current detection that measures the load current on each channel. All 0 V switch outputs can be operated with manual switches. With integrated bus coupling unit. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. A green LED indicates that the device is ready for operation once the application has been loaded. The load is connected with screw terminals. KNX software functions: Operation as break contact or make contact. Staircase lighting function with/without manual OFF function and switch-off warning. Delay functions. Scenes. Logic function. Blocking or priority control. Feedback function. Status. Central function with delay. Parameterisation for bus voltage failure and recovery. Behaviour for download. Current detection function: Behaviour when value exceeds/falls short of the threshold value. Energy, operating and switch on counter with limit value monitoring. Flash function. Nominal voltage: AC 0 V, 0 - 0 Hz Per switching contact: Nominal current:  A, cos = 0. Incandescent lamps: AC 0 V, max. 00 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps: AC 0 V, max. 00 VA, with parallel compensation Capacitive load: AC 0 V,  A, max. 00 F Motor load: AC 0 V, max. 000 W Current detection load current: Detection range: 0. A to  A (sine effective value or DC) Sensing accuracy: +/- % of the current value at hand (sine) and +/- 00 mA Frequency: 0/0 Hz Description: 00 mA Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    For independent switching of  loads via make contacts. All 0 V switch outputs can be operated with manual switches. With integrated bus coupler. The device is connected to the mains via screw terminals; every second L connection is bridged internally. For installation on DIN rails EN00. The bus is connected using a bus connecting terminal; a data rail is not necessary. A green LED indicates readiness for operation after the application has been loaded. KNX software functions: Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour. Nominal voltage: AC 0 V, 0-0 Hz Per switch contact: Nominal current:  A, cos =0. Incandescent lamps: AC 0 V, max. 00 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps: AC 0 V, max. 00 VA Capacitive load: AC 0 V,  A, max. 00 F Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    Switch actuator REG-K/12x230/16 with current detection and manual mode

    Version Switch actuator REG-K/12x230/10 with manual mode light grey

    Art. no. MTN648495

    Version light grey

    Art. no. MTN649212

    For independent switching of up to  loads via make contacts. The function of the switching channels is freely configurable. All switching outlets can be operated manually using push-button operation. With integrated bus coupler. For installation on DIN rails EN 00. Bus connection is via bus terminals, a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation. KNX software functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function. Disable function. Logic operation or priority control. Status feedback function for each channel. Power supply: Nominal voltage: AC 0 V, 0 - 0 Hz External auxiliary voltage (optional): AC 0 - 0 V, 0 - 0 Hz, max.  VA For each switch output: Nominal current: 0 A, cos = ; 0 A, cos = 0. Incandescent lamps: AC 0 V, max. 000 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps:AC 0 V, max. 00 W, uncompensated AC 0 V, max. 000 W parallel-compensated Capacitive load: AC 0 V, max. 0 F Device width:  modules = approx. 0 mm Contents: With bus connecting terminal and cable cover.

    For independently switching  loads via make contacts. The actuator has integrated current detection that measures the load current on each channel. All 0 V switch outputs can be operated with manual switches. With integrated bus coupling unit. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. A green LED indicates that the device is ready for operation once the application has been loaded. The load is connected with screw terminals. KNX software functions: Operation as break contact or make contact. Staircase lighting function with/without manual OFF function and switch-off warning. Delay functions. Scenes. Logic function. Blocking or priority control. Feedback function. Status. Central function with delay. Parameterisation for bus voltage failure and recovery. Behaviour for download. Current detection function: Behaviour when value exceeds/falls short of the threshold value. Energy, operating and switch on counter with limit value monitoring. Flash function. Nominal voltage: AC 0 V, 0 - 0 Hz Per switching contact:Nominal current:  A, cos = 0. Incandescent lamps: A C 0 V, max. 00 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps: AC 0 V, max. 00 VA, with parallel compensation Capacitive load: AC 0 V,  A, max. 00 F Motor load: AC 0 V, max. 000 W Current detection load current: Detection range: 0. A to  A (sine effective value or DC) Sensing accuracy: +/- % of the current value at hand (sine) and +/- 00 mA Frequency: 0/0 Hz Description: 00 mA Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Blind/switch actuators

    KNX

    Blind/switch actuators

    Blind/switch actuators
    Blind/switch actuator REG-K/8x/16x/10 with manual mode

    Blind actuators
    Blind actuator REG-K/2x/10 with manual mode

    Version light grey

    Art. no. MTN649908

    Version light grey

    Art. no. MTN649802

    For independent control of up to  blind/roller shutter drives or for switching up to  loads via make contacts. The function of the blind or switching channels is freely configurable. All blind/ switch outputs can be operated manually using push-buttons. With integrated bus coupling unit. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation. KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Weather alarm. -bit positioning for height and slats. Scenes. Status and feedback function. Switch actuator functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function. Disable function. Logic operation or priority control. Status feedback function for each channel. Power supply: Nominal voltage: AC 0 V, 0 - 0 Hz External auxiliary voltage (optional): AC 0 - 0 V, 0 - 0 Hz, max.  VA For each blind output:Nominal current: 0 A, cos = 0. Motor load: AC 0 V, max. 000 W For each switch output: Nominal current: 0 A, cos = ; 0 A, cos = 0. Incandescent lamps: AC 0 V, max. 000 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps:AC 0 V, max. 00 W, uncompensated AC 0 V, max. 000 W parallel-compensated Capacitive load: AC 0 V, max. 0 F Device width:  modules = approx.  mm Note: The blind actuator/switch actuator cannot be used in conjunction with the weather-dependent automatic functions of the weather combi-sensor/DCF art. no. MTN. If you require these functions then use the blind actuators art. no. MTN... Contents: With bus connecting terminal and cable cover.

    For independent control of  blind/roller shutter drives. The function of the blind channels is freely configurable. All blind outputs can be operated manually using push-button operation. With integrated bus coupling unit. For installation onto DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation. KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Differentiated disable functions and weather alarms. -bit positioning for height and slat. Scenes. Manual/automatic mode. Differentiated status and status feedback functions. For each blind output: Nominal voltage: AC 0 V, 0-0 Hz Nominal current: 0 A, cos = 0. Motor load: AC 0 V, max. 000 W Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    Blind actuator REG-K/4x24/6 with manual mode

    Version light grey

    Art. no. MTN648704

    Blind / switch actuator REG-K/12x/24x/10 with manual mode

    Version light grey

    Art. no. MTN649912

    For independent control of up to  blind/roller shutter drives or for switching up to  loads via make contacts. The function of the blind or switching channels is freely configurable. All blind/switch outputs can be operated manually using push-buttons. With integrated bus coupler. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation. KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Weather alarm. -bit positioning for height and slats. Scenes. Status and feedback function. Switch actuator functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function. Disable function. Logic operation or priority control. Status feedback function for each channel. Power supply: Nominal voltage: AC 0 V, 0 - 0 Hz External auxiliary voltage (optional): AC 0 - 0 V, 0 - 0 Hz, max.  VA For each blind output: Nominal current: 0 A, cos = 0. Motor load: AC 0 V, max. 000 W For each switch output: Nominal current: 0 A, cos = ; 0 A, cos = 0. Incandescent lamps: AC 0 V, max. 000 W Halogen lamps: AC 0 V, max. 00 W Fluorescent lamps:AC 0 V, max. 00 W, uncompensated AC 0 V, max. 000 W parallel-compensated Capacitive load: AC 0 V, max. 0 F Device width:  modules = approx.  mm Note: The blind actuator/switch actuator cannot be used in conjunction with the weather-dependent automatic functions of the weather combi-sensor/DCF art. no. MTN. If you require these functions then use the blind actuators art. no. MTN... Contents: With bus connecting terminal and cable cover.

    For independent control of  blind/roller shutter drives. The function of the blind channels is freely configurable. All blind outputs can be operated manually using push-button operation. With integrated bus coupler. For installation onto DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation. KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Differentiated disable functions and weather alarms. -bit positioning for height and slat. Scenes. Manual/automatic mode. Differentiated status and status feedback functions. For each blind output: Nominal voltage: DC  V 0 % Nominal current:  A Load types:  V direct current drives Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    Blind actuator REG-K/4x/6

    Version light grey

    Art. no. MTN646704

    For independent control of  blind/roller shutter drives. With integrated bus coupler and plug-in screw terminals. For installation onto DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. A green LED indicates readiness for operation after the application has been loaded. KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Weather alarms. -bit positioning for height and slats. Scenes. Automatic function. Differentiated status and feedback functions. For each blind output: Nominal voltage: AC 0 V, 0-0 Hz Nominal current:  A, cos = 0. Motor load: AC 0 V, max. 000 W Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Blind/switch actuators

    KNX

    Dimming actuators/control units

    Dimming actuators
    Roller shutter actuator REG-K/4x/10 with manual mode Dimming actuator REG-K/2x230/300 W

    Version light grey

    Art. no. MTN649704

    Version light grey

    Art. no. MTN646630

    For independent control of  roller shutter drives. The function of the roller shutter channels is freely configurable. All roller shutter outputs can be operated manually using push-button operation. With integrated bus coupler. For installation onto DIN rails EN 00. Bus connection is via bus terminals, a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation. KNX software functions: Roller shutter functions: Running time. Idle time. Differentiated disable functions and weather alarms. -bit positioning for height. Scenes. Manual/automatic function. Differentiated status and status feedback functions. For each roller shutter output: Nominal voltage: AC 0 V, 0-0 Hz Nominal current: 0 A, cos = 0. Motor load: AC 0 V, max. 000 W Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    Blind actuator REG-K/4x/10 with manual mode

    AC 0 V, 0 Hz For switching and dimming incandescent lamps and dimmable, wound transformers (ohmic / inductive load). (Phase control) With integral bus coupler, plug-in screw terminals, short-circuit and overload protection and soft start function to protect the lamps. For installation onto DIN rails EN 00. Bus connection is via bus terminals, a data rail is not necessary. Readiness for operation is indicated by a green LED after the application has been loaded, and an overload of one channel or both channels is indicated by a flashing light. KNX software functions: Starting behaviour, memory function, dimming speed, switching off by relative dimming, configurable minimum brightness and behaviour on bus voltage failure/recovery are programmable. Nominal voltage: AC 0 V, 0 Hz Nominal power/channel: max. 00 W/VA Minimum load:  W/VA Short-circuit protection: via fuse Device width:  modules = approx. 0 mm Contents: With bus connecting terminal and cable cover.

    Universal dimming actuator REG-K/230/1000 W Version light grey Art. no. MTN649804 Version light grey Art. no. MTN649310

    For independent control of  blind/roller shutter drives. The functions of the blind channels is freely configurable. All blind outputs can be operated manually using push-button operation. With integrated bus coupling unit. For installation onto DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation. KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Differentiated disable functions and weather alarms. -bit positioning for height and slat. Scenes. Manual/automatic mode. Differentiated status and status feedback functions. For each blind output: Nominal voltage: AC 0 V, 0-0 Hz Nominal current: 0 A, cos = 0. Motor load: AC 0 V, max. 000 W Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    Blind actuator REG-K/8x/10 with manual mode

    Version light grey

    Art. no. MTN649808

    For independent control of  blind/roller shutter drives. The functions of the blind channels is freely configurable. All blind outputs can be operated manually using push-buttons. With integrated bus coupler. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation. KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Differentiated disable functions and weather alarms. -bit positioning for height and slat. Scenes. Manual/automatic mode. Differentiated status and status feedback functions. For each blind output: Nominal voltage: AC 0 V, 0 - 0 Hz Nominal current:0 A, cos = 0. Motor load: AC 0 V, max. 000 W External auxiliary voltage (optional): AC 0-0 V, 0-0 Hz, max.  VA Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    AC 0 V, 0-0 Hz For switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers. (Phase control and phase alignment) With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature protection with soft start function. For installation onto DIN rails EN 00. The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected. Bus connection is via bus terminals; a data rail is not necessary. KNX software functions: Dimming operation via EIB, extension units and on the device, different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback, behaviour on bus voltage recovery. Nominal voltage: AC 0 - 0 V, 0/0 Hz Nominal power: max. 000 W/VA 0 W minimum load (ohmic) 0 VA minimum load (ohmic/inductive/capacitive) Input (extension unit operation): AC 0 V, 0/0 Hz (same phase as the dimming channel) Device width:  modules = approx.  mm Extension unit operation: With mechanical push-buttons (make contact). With TELE insert extension, art. No. MTN. Contents: With bus connecting terminal and cable cover.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Dimming actuators/control units

    KNX

    Dimming actuators/control units

    Universal dimming actuator REG-K/230/500 W

    Universal dimming actuator REG-K/4x230/250 W

    Version light grey

    Art. no. MTN649350

    Version light grey

    Art. no. MTN649325

    AC 0 V, 0-0 Hz For switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers. (Phase control and phase alignment) With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature protection with soft start function. For installation onto DIN rails EN 00. The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected. Bus connection is via bus terminals; a data rail is not necessary. KNX software functions: Dimming operation via EIB, extension units and on the device, different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback, behaviour on bus voltage recovery. Nominal voltage: AC 0 - 0 V, 0/0 Hz Nominal power/channel: max. 00 W/VA 0 W minimum load (ohmic) 0 VA minimum load (ohmic/inductive/capacitive) Input (extension unit operation): AC 0 V, 0/0 Hz (same phase as the dimming channel) Device width:  modules = approx.  mm Extension unit operation: With mechanical push-buttons (make contact). With TELE insert extension, art. No. MTN. Contents: With bus connecting terminal and cable cover.

    AC 0 V, 0-0 Hz For switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers (Automatic load detection). (Phase control and phase alignment) The connection of different outer conductors is allowed. With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature protection with soft start function. For installation onto DIN rails EN 00. The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected. Bus connection is via bus terminals; a data rail is not necessary. KNX software functions: Dimming operation via KNX, Dimming operation on the device, different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback. Nominal voltage: AC 0 - 0 V, 0/0 Hz Channels:  (different phases possible) Nominal power:  x 0 W/VA  channels:  x 00 W/VA and  x 0 W/VA  channels:  x 00 W/VA Minimum load/channel:  W (ohmic) 0 VA (ohmic-inductive/ohmic-capacitive) Device width:  HP = approx.  mm Contents: With bus connecting terminal and cable cover.

    Universal dimming actuator REG-K/2x230/300 W Universal dimming actuator REG-K/4x230/150 W

    Version light grey

    Art. no. MTN649330 Version light grey Art. no. MTN649315

    AC 0 V, 0-0 Hz For switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers. (Phase control and phase alignment) With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature protection with soft start function. For installation onto DIN rails EN 00. The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected. Bus connection is via bus terminals; a data rail is not necessary. KNX software functions: Dimming operation via EIB, extension units and on the device, different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback, behaviour on bus voltage recovery. Nominal voltage: AC 0 - 0 V, 0/0 Hz Nominal power/channel: max. 00 W/VA 0 W minimum load (ohmic) 0 W minimum load (ohmic/inductive/capacitive) Input (extension unit operation): AC 0 V, 0/0 Hz (same phase as the dimming channels) Device width:  modules = approx.  mm Extension unit operation: With mechanical push-buttons (make contact). With TELE insert extension, art. No. MTN. Contents: With bus connecting terminal and cable cover.

    AC 0 V, 0-0 Hz For switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers. (Phase control and phase alignment) With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature protection with soft start function. For installation onto DIN rails EN 00. The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected. Bus connection is via bus terminals; a data rail is not necessary. KNX software functions: Dimming operation via EIB, extension units and on the device, different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback, behaviour on bus voltage recovery. Nominal voltage: AC 0 - 0 V, 0/0 Hz Nominal power/channel: max. 0 W/VA 0 W minimum load (ohmic) 0 VA minimum load (ohmic/inductive/capacitive) Input (extension unit operation): AC 0 V, 0/0 Hz (same phase as the dimming channels) Device width:  modules = approx. 0 mm Extension unit operation: With mechanical push-buttons (make contact). With TELE insert extension, art. No. MTN. Contents: With bus connecting terminal and cable cover.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Dimming actuators/control units

    KNX

    Dimming actuators/control units

    Control units 1-10 V


    Control unit 0-10 V REG-K/1-gang with manual mode

    Other actuators
    Analogue actuator REG-K/4-gang

    Version light grey

    Art. no. MTN647091

    Version light grey

    Art. no. MTN682291

    For connecting devices with 0-0 V interface to KNX. With integrated bus coupler and screw terminals (0 V) or plug-in screw terminals (0-0 V). The 0 V switch output can be operated with a manual switch. For installation onto DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. KNX software functions: Different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback, behaviour on bus voltage recovery. Switch contact: for switching the electronic ballasts/transformers Switching voltage: AC 0 V Switching current: A, cos = 0. Switching capacity: AC 0 V, 00 W, cos =  Capacitive load: AC 0 V, 00 W, 00 F Halogen lamps: AC 0 V, 00 W Fluorescent lamps:AC 0 V, max. 000 W, uncompensated AC 0 V, max. 00 VA, with parallel compensation 0-10 V interface: for dimming the electronic ballasts/transformers Voltage range: DC 0-0 V Device width: . modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    The output channels can be parameterised for different current and voltage signals to control different analogue variables (e.g. servomotors). The actuator has four analogue outputs. For use in connection with the analogue actuator module REG/-gang,  analogue outputs are provided. Connections are made using the sub-bus. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. With continuity checking of the current outputs. Auxiliary voltage: AC  V (+/-0 %) Analogue outputs:  Current signals: 0 ... 0 mA,  ... 0 mA Voltage signals: 0 ...  V, 0.. 0 V Continuity checking:  ... 0 mA Outputs: DC  V, 00 mA (total) Device width:  modules = approx.  mm Accessories: Analogue actuator module REG/-gang, art. no. MTN. Power supply REG, AC  V /  A, art. no. MTN. Contents: With bus connecting terminal and cable cover.

    Analogue actuator module REG/4-gang

    Control unit 0-10 V REG-K/3-gang with manual mode Version light grey Version light grey Art. no. MTN646991 Art. no. MTN682292

    For connecting devices with 0-0 V interface to KNX. With integrated bus coupler and screw terminals (0 V) or plug-in screw terminals (0-0 V). Each individual 0 V switch output can be operated manually with a manual switch. For installation onto DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. KNX software functions: Different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback, behaviour on bus voltage recovery. Switch contact: for switching the electronic ballasts/transformers Switching voltage: AC 0 V Switching current: A, cos = 0. Switching capacity: AC 0 V, 00 W, cos =  Capacitive load: AC 0 V, 00 W, 00 F Halogen lamps: AC 0 V, 00 W Fluorescent lamps:AC 0 V, max. 000 W, uncompensated AC 0 V, max. 00 VA, with parallel compensation 0-10 V interface: for dimming the electronic ballasts/transformers Voltage range: DC 0-0 V Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    Extension module to extend analogue actuator REG-K/-gang from  to  analogue outputs. Connections are made using the sub-bus. The output channels can be independently parameterised for different current and voltage signals to control different control values (e.g. servomotors). For installation on DIN rails EN 00. Auxiliary voltage: AC  V (+/-0 %) Analogue outputs:  Current signals: 0 ... 0 mA,  ... 0 mA Voltage signals: 0 ...  V, 0.. 0 V (DC) Continuity checking:  ... 0 mA Outputs: DC  V, 00 mA (total) Device width:  modules = approx.  mm Accessories: Power supply REG, AC  V /  A, art. no. MTN. Contents: With sub-bus jumper.

    0

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Control and display devices

    KNX

    Control and display devices

    Control and display devices


    Touch panel 7 Glass frame for 7 touch panel

    Version

    Art. no. MTN6260-0007

    Version

    Art. no. MTN6270-3619

    nBrilliant white

    The  touch panel is used for the visualisation and control of current building states and functions. The integrated visualisation software with the self-explanatory user interface offers a high level of operating convenience when operating the touch-sensitive TFT display. Windows CE.NET is installed as the operating system. Further functions: Real-time week time switch with internet time synchronisation Presence simulation (recording and play-back of switching habits) Alarm management Internet access Load a slide show Automatic standby switching Password protection Adjustable user interface The  touch panel has a LAN (0/00 Mbit/s), KNX and USB interface. With integrated loudspeaker. Due to its flat design in a flush-mounted housing, its uses range from residential to commercial applications. It can be installed horizontally or vertically. KNX software functions: Switching, dimming, operation of sunshade systems such as roller shutters, awnings and blinds. Save and retrieve scenes Transmit values. Telegram status display. Temperature display. Logic functions. Disable module. Dynamic language selection via KNX object. Nominal voltage: AC /0 V , 0 Hz Power consumption:  W in energy-saving mode,  W when in operation Ambient operating temperature: -C to  C Display size: . cm () Resolution: 00 x 0 pixels Display type: TFT Colours shown: .000 Hardware:  MHz Intel XScale PXA0 RAM:  MB Flash memory:  MB Type of protection: IP 0 Dimensions: xx mm (HxWxD) In KNX, to be completed with: Inner frame set for  touch panel, art. no.MTN0-0... Frame for  touch panel, art. no. MTN0-00.., MTN0-.., MTN0-...

    Decorative glass frame for  touch panel. In KNX, to be completed with:  touch panel, art. no. MEG0-000. Inner frame set for  touch panel, art. no.MTN0-0...

    Metal frame for 7 touch panel

    Version Brass Steel

    Art. no. MTN6270-3721 MTN6270-3714

    Decorative solid metal frame for  touch panel. In KNX, to be completed with:  touch panel, art. no. MEG0-000. Inner frame set for  touch panel, art. no.MTN0-0...

    Aluminium frame for 7 touch panel

    Version aluminium Polar white Black

    Art. no. MTN6270-3760 MTN6270-3719 MTN6270-3722

    Inner frame set for 7 touch panel

    Decorative aluminium frame for  touch panel. In KNX, to be completed with:  touch panel, art. no. MEG0-000. Inner frame set for  touch panel, art. no.MTN0-0...

    Frame for 7 touch panel Version Art. no. MTN6270-0119 MTN6270-0122 Version Art. no. MTN6270-0019 MTN6270-0022

    npolar white nblack

    The set consists of the inner frame and the USB cover. The design frames, which are available in various types of material, are attached to the touch panel using the inner frame. Dimensions: 0xx. mm (HxWxD) In KNX, to be completed with:  touch panel, art. no. MEG0-000. Frame for  touch panel, art. no. MTN0-00.., MTN0-.., MTN0-... Replacement part: USB cover for  touch panel, art. no. MTN0-0...

    npolar white nblack

    Decorative frame for  touch panel. In KNX, to be completed with:  touch panel, art. no. MEG0-000. Inner frame set for  touch panel, art. no.MTN0-0...

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Control and display devices

    KNX

    Control and display devices

    Flush-mounted mounting box for IP touch panel 7

    IP touch panel 10

    Version grey

    Art. no. MTN6270-0001

    Version

    Art. no. MTN683090

    n aluminium
    glossy

    For flush-mounted installation of the touch panel 7. DimensionsOuter dimensions: xx mm (HxWxD) In KNX, to be completed with:  touch panel, art. no. MEG0-000.

    Cavity wall mounting box for touch panel 7

    Version

    Art. no. MTN6270-0002

    For installing the  touch panel into a cavity wall. DimensionsOuter dimensions: 0xx mm (HxWxD) Opening: xx mm (HxWxD) In KNX, to be completed with:  touch panel, art. no. MEG0-000.

    USB cover for 7 touch panel

    Version

    Art. no. MTN6270-0219 MTN6270-0222

    npolar white nblack

    The IP touch panel 0 is used for the visualisation and control of current building statuses and functions. It is operated interactively on the touch-sensitive TFT display. Windows CE is installed as the operating system. With this standard, solutions such as data management, web functions and client/server and network functions can be configured quickly and easily. Using the optional visualisation software, the IP touch panel 0 can be programmed for the visualised, interactive control of building functions. The IP touch panel 0 has LAN (0/00 Mbit/s), and a RS  and USB connection. The USB connection is in the front behind the frame. A plug-in KNX module can be used to connect the IP touch panel 0 to the KNX. Due to its flat design in a flush-mounted housing, its uses range from home applications to purpose-built applications. KNX software functions: Configuration using the TP VISU configuration tool. Display size: 0. (. cm) Resolution: 00 x 00 pixels, SVGA Display type: TFT, resistive touch Colours shown: > 000 Mains voltage: DC  V Power consumption: < 0 W RAM:  MB Data buffering: via battery Ambient operating temperature: C bis 0C Type of protection: IP 0 Frame dimensions: .x.x mm (HxWxD) Opening: .x0. mm (HxW) Accessories: KNX EIB module for IP touch panel art. no. MTN0. Design frame for IP touch panel 0 art. no. MTN0. Flush-mounted mounting box for IP touch panel 0 art. no. MTN0. Cavity wall mounting box for IP touch panel 0 art. no. MTN0. Note: The configuration software is available on the Internet. Contents: With Design M-Plan frames, aluminium.

    For inserting into the intermediate frame. The USB cover is required as a spare part when damaged or lost.

    KNX module for IP touch panel

    Version

    Art. no. MTN683093

    Plug-in module for connecting the IP touch panel to the KNX.

    Real glass frame for IP touch panel 10

    Version

    Art. no. MTN489960

    nDiamond silver

    For M-Plan. Decorative frame for the IP touch panel 0. Dimensions: .x.x. mm (HxWxD)

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Control and display devices

    KNX

    Room temperature control units

    Room temperature control unit System M


    Flush-mounted mounting box for IP touch panel 10 Cavity wall mounting box for IP touch panel 10 Push-button 2-gang plus with room temperature control unit

    Version

    Art. no. MTN683091

    Version

    Art. no. MTN683092

    Version

    Art. no. MTN6212-0319 MTN6212-0325 MTN6212-0414 MTN6212-0460

    n white, polar
    glossy glossy

    For flush-mounted installation of the IP touch panel 0. Dimensions: 0xx mm (HxWxD)

    For installing the IP touch panel 0 into a cavity wall. Dimensions: 0xx mm (HxWxD)

    n white, active nanthracite naluminium

    For System M. Convenient control unit with  operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light. With room temperature control unit and display. With  red LEDs. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the push-buttons: Switching, toggling, dimming, blind control (relative or absolute), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions, timed control with synchronisation, notification functions, the cyclic reading of external temperature values, fan control, operating modes, move setpoints. Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Scene function. Operation: Menu. Contents: With bus connecting terminal and supporting plate. Screw for protection against dismantling. With protective hood for plaster.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Room temperature control units

    KNX

    Room temperature control units

    Push-button 4-gang plus with room temperature control unit

    Room temperature control unit with display

    Version

    Art. no. MTN6214-0319 MTN6214-0325 MTN6214-0414 MTN6214-0460

    Version

    Art. no. MTN6241-0319 MTN6241-0325 MTN6241-0414 MTN6241-0460

    n white, polar
    glossy glossy

    n white, polar
    glossy glossy

    n white, active nanthracite naluminium

    n white, active nanthracite naluminium

    For System M. Convenient control unit with  operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light. With room temperature control unit and display. With integrated piezoelectric buzzer to display alarm states and IR receiver. All functions of the respective buttons can be controlled via IR remote control. With  red LEDs. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the push-buttons: Switching, toggling, dimming, blind control (relative or absolute), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions, timed control with synchronisation, notification functions, the cyclic reading of external temperature values, fan control, operating modes, move setpoints. Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Scene function. Operation: Menu. Transmitter: IR remote control Distance, art. no. MTN0. Contents: With bus connecting terminal and supporting plate. Screw for protection against dismantling. With protective hood for plaster.

    For System M. KNX Room temperature control unit with display, labelling field, operation and status LED. The  buttons allow to shift set values and change operation modes. With  red LEDs. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Functions of the push-buttons: Selection of -  operating modes each push-button. Move setpoint. Contents: With bus connecting terminal and supporting plate. Screw for protection against dismantling. With protective hood for plaster.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Room temperature control units

    KNX

    Room temperature control units

    KNX Room temperature control unit, flush-mounted/PI with 4-gang push-button interface

    Room temperature control unit for properties

    Version

    Art. no. MTN616719 MTN616725 MTN616814 MTN616860

    Version

    Art. no. MTN6221-0319 MTN6221-0325 MTN6221-0414 MTN6221-0460

    n white, polar
    glossy glossy

    n white, polar
    glossy glossy

    n white, active nanthracite naluminium

    n white, active nanthracite naluminium

    For System M. The device is a room temperature control unit and a binary input. Depending on the operating mode, the current temperature setpoint value and the room temperature, a control value for the heating or cooling control unit is transmitted to the KNX. The temperature can either be recorded by the internal or the external temperature sensor which must be connected to the push-button interface. The push-button interface generates an internal signal voltage for connecting max. four conventional push-buttons or floating contacts. Of these, two inputs can be used to connect low current LEDs. KNX software functions: Functions of the room temperature control unit: Controller type: -step control, continuous PI control, switching PI control (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs Operating modes: comfort, comfort extension, standby, night economy, frost/heat protection Operation: Setpoint adjustment can be parameterised in the range with adjusting wheel; presence push-button functions can be parameterised/switched off Valve protection, controller disable Push-button interface functions: Switching, dimming, external blinds, valuator (dimming valuator, extension unit for light scenes with/without memory function, temperature valuator, brightness valuator). Push-button interface: up to  inputs,  of which can be used as outputs and one for connecting the remote sensor. Output voltage:  V (SELV) Output current: max. 0. mA Max. cable length: Inputs/outputs max.  m, remote sensor max. 0 m Accessories: Remote sensor for KNX room temperature control unit, UP/PI art. no. MTN0.

    For System M. KNX room temperature control unit for properties with integrated bus coupler. Depending on the operating mode, the current temperature setpoint value and the actual room temperature, a control value for the heating or cooling control unit is transmitted to the KNX. The temperature can optionally be measured by the internal or by an external bus temperature sensor. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. Operating mode, nominal value, control function settings made only via the bus The device does not have any operating and display elements. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Operation: only via bus telegrams. Contents: With bus connecting terminal and supporting plate. With protective hood for plaster.

    Remote sensor for room temperature control unit UP/PI

    Version black

    Art. no. MTN616790

    Temperature sensor the floor/room temperature measurement Cable length:  m ( x 0. mm)

    00

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    0

    KNX

    Room temperature control units

    KNX

    Room temperature control units

    Room temperature control unit Artec, Trancent, Antique


    Push-button 2-gang plus with room temperature control unit

    Push-button 4-gang plus with room temperature control unit

    Version Version Art. no. MTN6212-4044 MTN6212-4019 MTN6212-4060 MTN6212-4146

    Art. no. MTN6214-4044 MTN6214-4019 MTN6214-4060 MTN6214-4146

    nwhite, glossy n white, polar


    glossy

    nwhite, glossy n white, polar


    glossy

    naluminium nstainless steel

    naluminium nstainless steel

    For Artec, Trancent, Antique. Convenient control unit with  operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light. With room temperature control unit and display. With  blue LEDs. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the push-buttons: Switching, toggling, dimming, blind control (relative or absolute), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions, timed control with synchronisation, notification functions, the cyclic reading of external temperature values, fan control, operating modes, move setpoints. Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Scene function. Operation: Menu. Contents: With bus connecting terminal and supporting plate. Screw for protection against dismantling. With protective hood for plaster.

    For Artec, Trancent, Antique. Convenient control unit with  operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light. With room temperature control unit and display. With integrated piezoelectric buzzer to display alarm states and IR receiver. All functions of the respective buttons can be controlled via IR remote control. With  blue LEDs. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the push-buttons: Switching, toggling, dimming, blind control (relative or absolute), pulse edges trigger -, -, - or -bit telegrams (distinction between short and long operation), pulse edges with -byte telegrams (distinction between short and long operation), -bit linear regulator, scene retrieval, scene saving, disable functions, timed control with synchronisation, notification functions, the cyclic reading of external temperature values, fan control, operating modes, move setpoints. Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Scene function. Operation: Menu. Transmitter: IR remote control Distance, art. no. MTN0. Contents: With bus connecting terminal and supporting plate. Screw for protection against dismantling. With protective hood for plaster.

    0

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    0

    KNX

    Room temperature control units

    KNX

    Room temperature control units

    Room temperature control unit with display

    KNX Room temperature control unit, flush-mounted/PI with 4-gang push-button interface

    Version

    Art. no. MTN6241-4044 MTN6241-4019 MTN6241-4060 MTN6241-4146 Version Art. no. MTN616944 MTN616919 MTN616960 MTN616946

    nwhite, glossy n white, polar


    glossy

    nwhite npolar white naluminium nvarnished stainless steel

    naluminium nstainless steel

    For Artec, Trancent, Antique. KNX Room temperature control unit with display, labelling field, operation and status LED. The  buttons allow to shift set values and change operation modes. With  blue LEDs. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Functions of the push-buttons: Selection of -  operating modes each push-button. Move setpoint. Contents: With bus connecting terminal and supporting plate. Screw for protection against dismantling. With protective hood for plaster.

    For Artec, Trancent, Antique. The device is a room temperature control unit and a binary input. Depending on the operating mode, the current temperature setpoint value and the room temperature, a control value for the heating or cooling control unit is transmitted to the KNX. The temperature can either be recorded by the internal or the external temperature sensor which must be connected to the push-button interface. The push-button interface generates an internal signal voltage for connecting max. four conventional push-buttons or floating contacts. Of these, two inputs can be used to connect low current LEDs. KNX software functions: Functions of the room temperature control unit: Controller type: -step control, continuous PI control, switching PI control (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs Operating modes: comfort, comfort extension, standby, night economy, frost/heat protection Operation: Setpoint adjustment can be parameterised in the range with adjusting wheel; presence push-button functions can be parameterised/switched off Valve protection, controller disable Push-button interface functions: Switching, dimming, external blinds, valuator (dimming valuator, extension unit for light scenes with/without memory function, temperature valuator, brightness valuator). Push-button interface: up to  inputs,  of which can be used as outputs and one for connecting the remote sensor. Output voltage:  V (SELV) Output current: max. 0. mA Max. cable length: Inputs/outputs max.  m, remote sensor max. 0 m Accessories: Remote sensor for KNX room temperature control unit, UP/PI art. no. MTN0.

    Remote sensor for room temperature control unit UP/PI

    Version black

    Art. no. MTN616790

    Temperature sensor the floor/room temperature measurement Cable length:  m ( x 0. mm)

    0

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    0

    KNX

    Room temperature control units

    KNX

    Room temperature control units

    Room temperature control unit Altira


    KNX Room temperature control unit with display

    Room temperature control unit Unica


    KNX Room temperature control unit with display

    Version

    Art. no. ALB45154 ALB46154

    Version

    Art. no. MGU3.534.18 MGU3.534.25

    nwhite naluminium

    nwhite nivory

     modules In Altira design. KNX Room temperature control unit with display and  buttons.  buttons allow to shift set values and change operation modes, the other  buttons are used for navigation in the menu. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Functions of the push-buttons: Selection of -  operating modes each push-button. Move setpoint. Contents: With bus connecting terminal.

     modules In Unica design. KNX Room temperature control unit with display and  buttons.  buttons allow to shift set values and change operation modes, the other  buttons are used for navigation in the menu. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Functions of the push-buttons: Selection of -  operating modes each push-button. Move setpoint. Contents: With bus connecting terminal.

    0

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    0

    KNX

    Room temperature control units

    KNX

    Room temperature control units

    KNX Room temperature control unit with display

    KNX Room temperature control unit with display

    Version

    Art. no. MGU5.534.18 MGU5.534.25

    Version

    Art. no. MGU50.534.18 MGU50.534.25

    nwhite nivory

    nwhite nivory

     modules In Unica design. KNX Room temperature control unit with display and  buttons.  buttons allow to shift set values and change operation modes, the other  buttons are used for navigation in the menu. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Functions of the push-buttons: Selection of -  operating modes each push-button. Move setpoint. Contents: With fixing frame. With bus connecting terminal.

     modules In Unica design. KNX Room temperature control unit with display and  buttons.  buttons allow to shift set values and change operation modes, the other  buttons are used for navigation in the menu. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Functions of the push-buttons: Selection of -  operating modes each push-button. Move setpoint. Contents: With fixing frame and claws. With bus connecting terminal.

    0

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    0

    KNX

    Room temperature control units

    KNX

    Room temperature control units

    Room temperature control unit Unica Top


    KNX Room temperature control unit with display KNX Room temperature control unit with display

    Version

    Art. no. MGU3.534.30 MGU3.534.12

    Version

    Art. no. MGU5.534.30 MGU5.534.12

    naluminium ngraphite

    naluminium ngraphite

     modules In Unica Top design. KNX Room temperature control unit with display and  buttons.  buttons allow to shift set values and change operation modes, the other  buttons are used for navigation in the menu. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Functions of the push-buttons: Selection of -  operating modes each push-button. Move setpoint. Contents: With bus connecting terminal.

     modules In Unica Top design. KNX Room temperature control unit with display and  buttons.  buttons allow to shift set values and change operation modes, the other  buttons are used for navigation in the menu. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Functions of the push-buttons: Selection of -  operating modes each push-button. Move setpoint. Contents: With fixing frame. With bus connecting terminal.

    0

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Room temperature control units

    KNX

    Room temperature control units

    Room temperature control actuator


    KNX Room temperature control unit with display EMO valve drive with 2 binary inputs EMO valve drive

    Version

    Art. no. MGU50.534.30 MGU50.534.12

    Version polar white

    Art. no. MTN639118

    Version polar white

    Art. no. MTN639119

    naluminium ngraphite

     modules In Unica Top design. KNX Room temperature control unit with display and  buttons.  buttons allow to shift set values and change operation modes, the other  buttons are used for navigation in the menu. The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. With integrated bus coupler. The bus is connected using a bus connecting terminal. KNX software functions: Functions of the room temperature control unit: Controller type: -step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 00% or switching ON/OFF Controller mode: Heating with one controller output Cooling with one controller output Heating and cooling with separate controller outputs Heating and cooling with one controller output -step heating with  control outputs -step cooling with  control outputs -step heating and cooling with  control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as  byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Functions of the push-buttons: Selection of -  operating modes each push-button. Move setpoint. Contents: With fixing frame and claws. With bus connecting terminal.

    Electromotive proportional valve drive with integrated bus coupler and microprocessor control with automatic valve lift detection. With two integrated binary inputs. The valve drive can be connected directly to the KNX. A separate power supply is not required. KNX software functions: Control value. Actual position. Status. Forced position (window Open detection, lower and upper limit for basic temperature control of underfloor heating for example). Binary inputs. Limit value. Power consumption: typ. 0 mA (= 0 mW; approx.  BCU modules) Lift: min. .0 mm; max. . mm Running time:  s/mm Type of protection: IP  in line with EN 0 (for vertical installation) Protection class: III in line with EN 00 Connecting cable: 1 m fixed; J(E)YY xx0. Connection to bus line: via bus connecting terminal Installation: suitable for all Heimeier thermostatic valve bodies and three-way changeover valves Accessories: Programming magnet, art. no. MTN0.

    Electromotive proportional valve drive with integrated bus coupler and microprocessor control with automatic valve lift detection. The valve drive can be connected directly to the KNX. A separate power supply is not required. KNX software functions: Setpoint position (control value). Actual position. Status signal. Forced position. Cyclical monitoring. Power consumption: max.  mA at 0 V (= 0 mW) Lift: max. . mm Running time:  s/mm Type of protection: IP  in line with EN 0 (for vertical installation) Protection class: III in line with EN 00 Connection cable: 1 m fixed; J-Y (St) Y 1 x  x 0. Connection to bus line: via bus connecting terminal Installation: Fits all Heimeier thermostat valve bases Accessories: Programming magnet, art. no. MTN0.

    Programming magnet

    Version

    Art. no. MTN639190

    Non-contact programming of the physical address of the EMO valve drive or KNX ARGUS 0.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Room temperature control units

    KNX

    Room temperature control units

    KNX fan coil actuator REG-K

    Thermoelectric valve drive 230 V

    Version light grey

    Art. no. MTN645094

    Version polar white

    Art. no. MTN639125

    For heating, ventilation and air conditioning control. For controlling fan convectors with up to three speeds, as well as for controlling three-step motor drives (continuous/pulse-width-modulated) or two-step thermal drives. The actuator supports -pipe and -pipe systems. Two floating binary inputs for window contact and level contact for condensed water container, for example. Connection of -speed to -speed fans. The multi-function push-button with room temperature control can be used to activate the fan coil actuator. With integrated bus coupler. For installation on DIN rails EN 0. The bus is connected using a bus connecting terminal; a data rail is not necessary. KNX software functions: Fan control: In automatic mode, the fan speeds are controlled dependently by the control value of the multi-function push-button. The three fan speeds and automatic mode can be switched via EIB telegram. The fan can be controlled either directly or via actuators / suitable dimming actuators. Fan speed feedback is possible via corresponding status feedback objects e.g. status LED of the push-button. The fan speed as well as the automatic status (Auto) can be displayed on the display of the multi-function push-button with TCU. Valve control: Type of controller: PI controller (PWM and continuous). Controller mode: Heating and/or cooling with common or separate valve outputs. Operating modes: The operating mode is selected in the multi-function push-button with TCU Power supply: AC 0 V 0 %, 0/0 Hz Power consumption: max.  VA Outputs: 3 floating contacts (fan coil), 2 semi-conductor switches (valve connections) Switching capacity for valves: 0. A, AC V - 0 V Additional relay switching capacity:  A Fan relay switching capacity:  A Inputs: , max. cable length  m Operation: Key for fan levels and heating/cooling mode Displays:  status LEDs Device width:  modules = approx.  mm Accessories: Multi-function push-button with room temperature control unit, art. no. MTN.., MTN.. , MTN.., MTN.., MTN.., MTN... Themoelectric valve drive  V art. no. MTN.

    Thermoelectric valve drive for opening and closing valves. For -step or PWM control of heating, air conditioning and ventilation systems, individual room control of surface heaters, control of heating circuit distributors, radiators, convector heaters, cooling ceilings. Operation is carried out by the heating actuator REG-K/ x0/0.0 A or a room temperature control unit (0 V) with -step or PWM output. Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributors. First-open function: The drive is factory-set to de-energised open. This allows the heating to be operated during the building shell phase. De-energised closed Functional display (open, closed, intermediate settings) Adjustment control Protection against dismantling Plug-in connecting cable Plug-in assembly Supply voltage: AC 0 V, 0/0 Hz Starting current: max. 00 mA for max. 00 ms Operating current:  mA Power consumption: . W Lift: approx.  mm Running time:  s/mm Positioning force: 00 N Circulating medium temperature: 0-00C Type of protection: IP  / II, in all installation positions Connecting cable:  m, x0. mm PVC Dimensions: 0xx mm (HxWxD)

    Thermoelectric valve drive 24 V

    Heating actuator REG-K/6x230/0.05 A

    Version polar white

    Art. no. MTN639126

    Version light grey

    Art. no. MTN645129

    For actuation of thermoelectric valve drives for heating or cooling ceilings. The heating actuator has  electronic outputs. Up to  valve drives can be connected to each output. The outputs are either switch activated ( bit) or PWM signal ( byte) activated. Each output is overload-protected and short-circuit-protected. For installation on DIN rails EN 00. The bus is connected using a bus connecting terminal; a data rail is not necessary. KNX software functions: Cycle time, status feedback, summer and winter operation, cyclical monitoring of variables, locking each output in a forced position, behaviour on bus power failure and recovery, overload and short circuit status, mains power loss reporting, collective fault reporting connected to all valves, transmission of the largest  byte variable value. Nominal voltage: AC 0 V, 0-0 Hz Outputs: , electronic Nominal current: 0.0 A, ohmic Starting current: max. . A Minimum load per used output:  valve drive Number of valve drives max.  per output Device width:  modules = approx.  mm Contents: With bus connecting terminal and cable cover.

    Thermoelectric valve drive for opening and closing valves. For -step or PWM control of heating, air conditioning and ventilation systems, individual room control of surface heaters, control of heating circuit distributors, radiators, convector heaters, cooling ceilings. Fan coil actuator REG-K or a room temperature control unit ( V) with -step or PWM output activates. Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributors. First-open function: The drive is factory-set to de-energised open. This allows the heating to be operated during the building shell phase. De-energised closed Functional display (open, closed, intermediate settings) Adjustment control Protection against dismantling Plug-in connecting cable Plug-in assembly Supply voltage: AC/DC  V +0%/-0%, 0-0 Hz Starting current: max. 0 mA for max.  min Operating current:  mA Power consumption: . W Lift: approx.  mm Running time:  s/mm Positioning force: 00 N Medium temperature: 0-00C Type of protection/protection class: IP  / II, in all installation positions Connecting cable:  m, x0. mm PVC Dimensions: 0 x  x  mm (HxWxD)

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    KNX

    Room temperature control units

    KNX

    Accessories

    Power supplies
    Valve adapter VA50 for thermoelectric valve drive Valve adapter VA78 for thermoelectric valve drive Power supply REG, 24 V DC / 0.4 A

    Version

    Art. no. MTN639150

    Version

    Art. no. MTN639178

    Version light grey

    Art. no. MTN693003

    For Honeywell+Braukmann, Reich, Landis+Gyr, MNG, Cazzagniga. Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributors

    For Danfoss RA. Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributors

    Valve adapter VA80 for thermoelectric valve drive

    Power supply for  V binary inputs. For installation onto DIN rails EN 00. With integrated overload and short-circuit protection. Primary supply: AC 0 V, - Hz Output voltage: DC  V +/-  % Output current: max. 0. A Output power: max. 0 W Device width:  module = approx.  mm For supplying power to: Binary input REG-K/x art. no. MTN. Binary input REG-K/x art. no. MTN. KNX/IP router REG-K art. no. MTN0.

    Version

    Art. no. MTN639180

    Power supply REG, 24 V DC / 1.25 A

    For Heimeier, Herb, Onda, Schlsser (from ), Oventrop M0x., TeSa. Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributors

    Version light grey

    Art. no. MTN693004

    Power supply for  V binary inputs, IC  KNX Internet Controller REG-K, REG-K panel control, KNX/IP router REG-K, 0 IP touch panel. For installation onto DIN rails EN 00. With integrated overload and short-circuit protection. Primary supply: AC 00-0 V, 0-0 Hz Output voltage: DC  V +/-  % Output current: max. . A Output power: max. 0 W Device width:  modules = approx.  mm For supplying power to: Binary input REG-K/x art. no. MTN. Binary input REG-K/x art. no. MTN. KNX/IP router REG-K art. no. MTN0. IP touch panel 0 art. no. MTN00.

    Power supply REG, AC 24 V/1 A

    Version light grey

    Art. no. MTN663529

    Power supply for  V binary inputs, weather station REG-K/-gang, analogue input module REG-K/-gang, rain sensor, wind sensor with 0 - 0 V interface and heating, KNX/IP router REG-K. For installation onto DIN rails EN 00. With fuse. Primary supply: AC 0 V, +/- 0 %, 0-0 Hz Output voltage: AC  V Output current: max.  A Fuse: x0 mm, 0 V, T 0 mA Device width:  modules = approx. 0 mm For supplying power to: Binary input REG-K/x art. no. MTN. Binary input REG-K/x art. no. MTN. Weather station REG-K/-gang, art. no. MTN. Analogue input REG/-gang art. no. MTN. Analogue input module REG/-gang art. no. MTN. Thermoelectric valve drive  V art. no. MTN. Contents: With spare fuse.

    

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    Index

    Index

    ALB0 ALB ALB ALB ALB ALB0 ALB ALB ALB ALB MGU.0. MGU.0. MGU.0. MGU.0.0 MGU.. MGU.. MGU.. MGU..0 MGU.. MGU.. MGU.. MGU..0 MGU.. MGU.. MGU.. MGU..0 MGU.. MGU.. MGU.. MGU..0 MGU.0. MGU.0. MGU.0. MGU.0.0 MGU.. MGU.. MGU.. MGU..0 MGU.. MGU.. MGU.. MGU..0 MGU.. MGU.. MGU.. MGU..0 MGU.. MGU.. MGU.. MGU..0 MGU0.0. MGU0.0. MGU0.0. MGU0.0.0 MGU0.. MGU0.. MGU0..
    

        0     0  0 0   0 0   0 0      0 0 0 0                  0 0        

    MGU0..0  MGU0..  MGU0..  MGU0..  MGU0..0  MGU0..  MGU0..  MGU0..  MGU0..0  MGU0..  MGU0.. 0 MGU0.. 0 MGU0..0  MTN0 0 MTN0 0 MTN 0 MTN 0 MTN 0 MTN0 0 MTN 0 MTN0 0 MTN0  MTN0  MTN0  MTN0  MTN0  MTN00  MTN0  MTN0  MTN00  MTN0  MTN0  MTN00  MTN0  MTN0  MTN0  MTN0  MTN-00  MTN 00 MTN 00 MTN0 00, 0 MTN 00 MTN0 00 MTN 0 MTN 0 MTN 0 MTN0 0 MTN  MTN  MTN  MTN  MTN  MTN  MTN  MTN  MTN 

    MTN  MTN0  MTN  MTN0  MTN  MTN  MTN  MTN  MTN  MTN  MTN  MTN  MTN  MTN  MTN  MTN  MTN  MTN  MTN-0 ,  MTN-0 ,  MTN-0 ,  MTN-00 ,  MTN-0 , 0 MTN-0 , 0 MTN-00 , 0 MTN- , 0 MTN-0 ,  MTN-0 ,  MTN-0 ,  MTN-00 ,  MTN-0 , 0 MTN-0 , 0 MTN-00 , 0 MTN- , 0 MTN-0 0 MTN-0 0 MTN-0 0 MTN-00 0 MTN-0  MTN-0  MTN-0 

    MTN-00 MTN-0 MTN-0 MTN-00 MTN- MTN MTN0 MTN MTN MTN0 MTN MTN MTN0 MTN MTN0 MTN MTN0 MTN MTN0 MTN MTN0 MTN0-000 MTN MTN MTN MTN0 MTN MTN MTN MTN MTN0 MTN MTN MTN MTN MTN0 MTN MTN MTN MTN0 MTN MTN MTN MTN0 MTN MTN MTN MTN0 MTN MTN MTN MTN0 MTN0-000 MTN0-000 MTN0-00 MTN0-00 MTN0-0

     0 0 0 0                                                    

    MTN0-0 MTN0-0 MTN0-0 MTN0- MTN0- MTN0- MTN0- MTN0- MTN0-0 MTN MTN0 MTN MTN MTN0 MTN MTN0 MTN MTN0 MTN0 MTN0 MTN0 MTN00 MTN0 MTN MTN MTN MTN0 MTN MTN MTN MTN0 MTN MTN MTN MTN0 MTN MTN MTN MTN0 MTN MTN0 MTN0 MTN0 MTN00 MTN0 MTN00 MTN0 MTN00 MTN0 MTN00 MTN MTN MTN MTN MTN MTN MTN

                               0 0 0 0 0 0 0 0                      

    MTN0 MTN MTN MTN MTN MTN0 MTN MTN0 MTN MTN MTN0 MTN MTN0 MTN0 MTN MTN MTN MTN MTN MTN MTN0 MTN MTN0 MTN0 MTN0 MTN MTN0 MTN MTN MTN MTN MTN MTN MTN MTN MTN0 MTN0 MTN0 MTN0 MTN MTN0 MTN MTN MTN0 MTN0 MTN0 MTN0 MTN0 MTN0 MTN0 MTN MTN00 MTN MTN MTN MTN0 MTN

     0 0 0                     0 0 0    0                          

    MTN MTN0 MTN MTN MTN MTN MTN0 MTN MTN MTN0 MTN0 MTN0 MTN MTN00 MTN00 MTN00 MTN0 MTN MTN0 MTN0 MTN00 MTN0 MTN00 MTN MTN MTN MTN MTN MTN MTN MTN00 MTN0 MTN0 MTN0 MTN MTN MTN0 MTN0 MTN0 MTN0 MTN0 MTN0 MTN0 MTN00 MTN00

                           0 0 0 0                  

    ISC0_V._0_00_EN

    ISC0_V._0_00_EN

    

    You might also like