Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    NEW: For Power Stations!: Wet Defibration of Biomass

    Uploaded by

    jnmanivannan
    The document describes a new KAHL Pan Grinder Mill that can wet defibrate biomass in two steps to under 2mm for co-firing in power stations. The mill uses rollers and a die to grind wood chips between 40-2,000 kg/h without drying or pelleting. It has a low energy consumption and space requirement and operates silently without requiring aspiration, cyclone, filter or exhaust systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    NEW: For Power Stations!: Wet Defibration of Biomass

    Uploaded by

    jnmanivannan
    30 views2 pages
    The document describes a new KAHL Pan Grinder Mill that can wet defibrate biomass in two steps to under 2mm for co-firing in power stations. The mill uses rollers and a die to grind wood chips between 40-2,000 kg/h without drying or pelleting. It has a low energy consumption and space requirement and operates silently without requiring aspiration, cyclone, filter or exhaust systems.

    Original Description:

    Wood chip grinder

    Original Title

    Wood chip grinder

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a new KAHL Pan Grinder Mill that can wet defibrate biomass in two steps to under 2mm for co-firing in power stations. The mill uses rollers and a die to grind wood chips between 40-2,000 kg/h without drying or pelleting. It has a low energy consumption and space requirement and operates silently without requiring aspiration, cyclone, filter or exhaust systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    30 views2 pages

    NEW: For Power Stations!: Wet Defibration of Biomass

    Uploaded by

    jnmanivannan
    The document describes a new KAHL Pan Grinder Mill that can wet defibrate biomass in two steps to under 2mm for co-firing in power stations. The mill uses rollers and a die to grind wood chips between 40-2,000 kg/h without drying or pelleting. It has a low energy consumption and space requirement and operates silently without requiring aspiration, cyclone, filter or exhaust systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    KAHL Pan Grinder Mill

    NEW: For Power Stations! Wet Defibration of Biomass


    for co-firing in power stations in 2 steps < 2 mm

    h 40 t/

    1st step

    Carbon dust and defibered biomass are blown in one material flow into the combustion chamber. The fresh, defibered wood chips are neither dried nor pelleted.

    2nd step

    KAHL Pan Grinder Mill

    NEW: For Power Stations! Wet Defibration of Biomass


    for co-firing in power stations

    The wood chips are ground between pan grinder rollers and die

    Optimum crushing of wood chips! This grinding process is appropriate for wet and dry raw material Without hammer mill Without pelleting Capacity range from a few hundred kg up to 40 t/h per mill No noise protection measures, silent operation Low energy consumption Low space requirement Without aspiration system, cyclone, filter and exhaust air plants No ATEX problems

    AMANDUS KAHL GmbH & Co. KG Dieselstrasse 5-9 D-21465 Reinbek / Hamburg Phone: +49 (0)40 727 71 - 0 Fax: +49 (0)40 727 71 - 100

    [email protected]

    www.akahl.de

    AK68-E 10/09

    You might also like