Scribd
Upload
777 views3 pages

SYMTRIK RF Time Solutions: SYM-RFT-XX Modules

The SYM-RFT-XX Modules receive encoded time data from national radio broadcasts in the US, UK, and Germany. The modules feature an LED indicator for alignment, output the data in an inverted format, and have a standby mode with very low current consumption. The modules operate from 3.0-5.0V and have antenna inputs, a serial output pin, a power-on pin, and ground connection.

Uploaded by

lupifieri
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
777 views3 pages

SYMTRIK RF Time Solutions: SYM-RFT-XX Modules

The SYM-RFT-XX Modules receive encoded time data from national radio broadcasts in the US, UK, and Germany. The modules feature an LED indicator for alignment, output the data in an inverted format, and have a standby mode with very low current consumption. The modules operate from 3.0-5.0V and have antenna inputs, a serial output pin, a power-on pin, and ground connection.

Uploaded by

lupifieri
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

SYMTRIK RF Time Solutions

DESCRIPTION

SYM-RFT-XX Modules

SYM-RFT-XX Modules complete with matched ferrite antenna, form a complete and integrated system for receiving encoded time data from national broadcasts: USA (WWVB, 60 KHz), UK (MSF, 60KHz) and Germany (DCF, 77.5KHz). Module Features The modules feature: On-board indicator LED to help alignment and testing during code development Output in convenient inverted format No pull-up resistor required output feeds directly into microcontroller Standby mode with very low (ca. 0.5uA) current consumption Operating voltage from 3.0 5.0V DIMENSIONS

SYM-RFT-XX Modules www.symtrik.com

Rev 01-28/01/11

-1-

SYMTRIK RF Time Solutions


PINOUT DETAILS

SYM-RFT-XX Modules

Pin Designation A1 A2 Vdd TCON PON GND NC

Function Antenna input 1 Antenna inout 2 Power supply for the module Serial output pin in inverted format Power-On. Connect to GND to power on module Ground connection for the module No Connection. Leave open, do not ground

TECHNICAL DATA Electrical Characteristics Parameter Supply voltage range Supply Current Standby Current (PON = Vdd) PON Input level low PON Input level high Set up time after PON Min 3.0 0.85Vcc Typ 3 0.5 0.5 Max 5.0 10 0.15Vcc 2 Unit V mA uA V V s

Vcc = 3V, input signal frequency 60Khz, carrier voltage 100% reduction to 30%. Tamb = 25 C.

SYM-RFT-XX Modules www.symtrik.com

Rev 01-28/01/11

-2-

SYMTRIK RF Time Solutions

SYM-RFT-XX Modules

You might also like