Scribd
Upload
2K views4 pages

Pinout Ide Ata

This document provides the pinout for an ATA (44-pin) internal connector and an IDE internal (40-pin) connector. It lists the pin number, name, direction, and description for each pin. Key details include pins for power (+5VL, +5VM, GND), data transfer (DD0-DD15), addressing (DA0-DA2), control signals (RESET, IORDY, DMARQ), and chip selection (/IDE_CS0, /IDE_CS1).

Uploaded by

frewell
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
2K views4 pages

Pinout Ide Ata

This document provides the pinout for an ATA (44-pin) internal connector and an IDE internal (40-pin) connector. It lists the pin number, name, direction, and description for each pin. Key details include pins for power (+5VL, +5VM, GND), data transfer (DD0-DD15), addressing (DA0-DA2), control signals (RESET, IORDY, DMARQ), and chip selection (/IDE_CS0, /IDE_CS1).

Uploaded by

frewell
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

ATA (44) internal connector pinout

Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 /RESET GND DD7 DD8 DD6 DD9 DD5 DD10 DD4 DD11 DD3 DD12 DD2 DD13 DD1 DD14 DD0 DD15 GND KEY DMARQ GND /DIOW GND /DIOR GND IORDY SPSYNC:CSEL /DMACK GND INTRQ /IOCS16 DA1 PDIAG DA0 DA2 /IDE_CS0 /IDE_CS1 /ACTIVE GND ? ? ? ? ? Name Dir Reset Ground Data 7 Data 8 Data 6 Data 9 Data 5 Data 10 Data 4 Data 11 Data 3 Data 12 Data 2 Data 13 Data 1 Data 14 Data 0 Data 15 Ground Key (Pin missing) DMA Request Ground Write Strobe Ground Read Strobe Ground I/O Ready Spindle Sync or Cable Select DMA Acknowledge Ground Interrupt Request IO ChipSelect 16 Address 1 Passed Diagnostics. Used for 80-pin cable detect. Address 0 Address 2 (1F0-1F7) (3F6-3F7) Led driver Ground Description

41 42 43 44

+5VL +5VM GND /TYPE

+5 VDC (Logic) +5 VDC (Motor) Ground Type (0=ATA)

IDE Internal (old) connector pinout


Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 /RESET GND DD7 DD8 DD6 DD9 DD5 DD10 DD4 DD11 DD3 DD12 DD2 DD13 DD1 DD14 DD0 DD15 GND KEY n/c GND /IOW GND /IOR GND IO_CH_RDY ALE n/c GND IRQR /IOCS16 DA1 n/c DA0 DA2 /IDE_CS0 /IDE_CS1 /ACTIVE GND ? Name Dir Reset Ground Data 7 Data 8 Data 6 Data 9 Data 5 Data 10 Data 4 Data 11 Data 3 Data 12 Data 2 Data 13 Data 1 Data 14 Data 0 Data 15 Ground Key Not connected Ground Write Strobe Ground Read Strobe Ground input/ output channel ready Address Latch Enable Not connected Ground Interrupt Request IO ChipSelect 16 Address 1 Not connected Address 0 Address 2 (1F0-1F7) (3F6-3F7) Led driver Ground Description

Male

Female

You might also like