Scribd Logo
Upload

Welcome to Scribd!

  • 116 views

    TDC - CS Pipe

    Uploaded by

    trushalpanchal
    This document specifies the requirements for carbon steel pipes to be used for various process connections on vessels. The pipes must be seamless carbon steel of Grade B, manufactured according to ASME Section II Part A and hot finished as per the purchase order. They must be hydrostatically tested and stamped according to specifications. Each pipe must be free of defects, scales, and corrosion and protected for delivery in an uncorroded condition. Inspection will be carried out by IOTAEC at their works.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    TDC - CS Pipe

    Uploaded by

    trushalpanchal
    116 views1 page
    This document specifies the requirements for carbon steel pipes to be used for various process connections on vessels. The pipes must be seamless carbon steel of Grade B, manufactured according to ASME Section II Part A and hot finished as per the purchase order. They must be hydrostatically tested and stamped according to specifications. Each pipe must be free of defects, scales, and corrosion and protected for delivery in an uncorroded condition. Inspection will be carried out by IOTAEC at their works.

    Original Title

    TDC_CS Pipe

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document specifies the requirements for carbon steel pipes to be used for various process connections on vessels. The pipes must be seamless carbon steel of Grade B, manufactured according to ASME Section II Part A and hot finished as per the purchase order. They must be hydrostatically tested and stamped according to specifications. Each pipe must be free of defects, scales, and corrosion and protected for delivery in an uncorroded condition. Inspection will be carried out by IOTAEC at their works.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    116 views1 page

    TDC - CS Pipe

    Uploaded by

    trushalpanchal
    This document specifies the requirements for carbon steel pipes to be used for various process connections on vessels. The pipes must be seamless carbon steel of Grade B, manufactured according to ASME Section II Part A and hot finished as per the purchase order. They must be hydrostatically tested and stamped according to specifications. Each pipe must be free of defects, scales, and corrosion and protected for delivery in an uncorroded condition. Inspection will be carried out by IOTAEC at their works.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Doc.No.

    IOTAEC/MFG/DE/FJ-62/TDC/CSPIPE/01

    TECHNICAL DELIVERY CONDITION

    Sheet No. Rev. No.

    of

    1 0

    TITLE : SPECIFICATION FOR CARBON STEEL PIPES


    1 NAME OF MATERIAL 2 SPECIFICATION DESIGNATION / YEAR OF ISSUE : SEAMLESS CARBON STEEL PIPE. : SA-106 Gr. B, AS PER ASME SEC.II PART - A, EDITION 2010, ADDENDA 2011a. : HOT FINISHED : AS PER PURCHASE ORDER. : AS PER ASME B36.10M - 2004. : VARIOUS PROCESS CONNECTION ON VESSEL. : AS PER PURCHASE ORDER. : NONE. : PRODUCT MARKING IS REQUIRED AS PER SA-530M AND SA-106. : NOT REQUIRED. : EACH PIPE SHALL BE HYDROSTATICALLY TESTED AS PER SA-530M. : A) EACH LENGTH OF PIPE SHALL BE LEGIBLY STAMPED / STENCILED AS PER SPECIFICATION AND MUST CO-RELATE WITH THE TEST CERTIFICATES . : B) ALL PIPES SHALL BE FREE FROM ANY INJURIOUS DEFECTS. NO WELD REPAIRS ARE PERMITTED. : C) THE PIPE INSIDE AND OUTSIDE SURFACE SHALL BE FREE OF SCALES AND OXIDES.PIPES SHALL BE PROTECTED SO THAT RECEIVED IN UN-CORRODED AND NON PITTED CONDITION. : REQUIRED AS PER SA-530M. : INSPECTION SHALL BE CARRIED OUT BY IOTAEC , AT OUR WORKS.

    3 MANUFACTURE 4 SIZE, SCHEDULE/WALL THICKNESS & QUANTITY 5 DIMENSIONS & TOLERANCES 6 END USE OF MATERIAL 7 LENGTH (SPECIFIC OR RANDOM) 8 OPTIONAL REQUIREMENT 9 PRODUCT MARKING

    10 IMPACT TEST REQUIREMENTS 11 HYDROSTATIC TEST

    12 ADDITIONAL REQUIREMENT

    13 MILL TEST CERTIFICATE 14 INSPECTION

    REV.NO.

    17-10-2012 DATE

    ISSUED FOR PURCHASE DESCRIPTION

    PREPARED BY

    NNS APPROVED BY

    Exhibit No. 8-3, Issue No.00, Rev. No.00, dtd. 24/08/2012

    You might also like