Dental Implants Parts

procedures & products
Spare Parts for:

Steri-Oss Replace Replace Select Systems
English Deutsch Espaol Franais Italiano Portugs
First from Nobel Biocare. NobelPerfect (NP, RP, WP), NobelDirect (NP, RP, WP), Brnemark System, NobelReplace and NobelSpeedy Implants. A complete assortment with FDA clearance for Immediate Function in all single, partial and fully edentulous restorations in the mandible and maxilla. Nobel Biocare AB and all production units are certified according to the Environmental Management System ISO 14001.
Patents Products in this catalog may be protected by one or more of the following United States patents: 4 763 788, 5 064 425, 5 269 685, 5 362 236, 5 525 314, 5 564 926, 5 842 859, 6 305 938, 6 319 000, 6 362 137, Des 353 674 and corresponding patents in other countries.
Some products may not be available in all markets. Please contact your local Nobel Biocare office for current product assortment and availability.
Nobel Biocare is in compliance with ISO 13485:2003 and Council Directive 93/42/EEC Canadian Medical Devices Regulation.
0086
For USA only: Federal law restricts this device to be sold by a licensed dentist or physician. All products are subject to change without notice.
List of Contents
NobelEsthetics
Table of Contents
Introduction
Spare Parts for Steri-Oss, Replace and Replace Select Systems . . . . . . . . . . 4
Healing Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Direct Abutment, Engaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Direct Abutment, Non-Engaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PME Transmucosal Abutment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 O-Ring Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Transfer Impression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Conical Abutment Gold Coping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Product Catalog
Replace External Hex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1214 Replace Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Steri-Oss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1618 Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Espaol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Franais . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Portugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
English
Introduction
NobelEsthetics
English
Introduction
Spare Parts for Steri-Oss, Replace and Replace Select Systems
Nobel Biocare now provides you with more choices than ever before. As Steri-Oss and Replace Systems may be replaced with new, improved alternatives, we will extend our service and provide you with spare parts needed to maintain the existing fabricated restorations.
Definition Spare parts are prosthetic components and instruments in the Nobel Biocare product range that are essential to maintaining existing fabricated restorations on patients (clinical demand).
Note: No product returns are accepted.
Product Facts Many of the spare parts have been, or will be, subject to the same changes as the ordinary product range, including new labels and packaging. Some product names have been slightly changed to harmonize with the ordinary products. These changes are being introduced gradually.
C&B&I A new way to think and act!
NobelEsthetics
Healing Abutment
Healing Abutment
Procedure The Healing Abutment is connected to the implant with the 0.050" hexagon screwdriver. Before final tightening, verify with a radiograph that the abutment is completely seated to confirm the metal-to-metal interface. Precautions It is imperative that all tissue and bone fragments be removed from the implant interface before seating the Healing Abutment. Professionals using Steri-Oss and Replace Systems should obtain appropriate training and education for their particular level of treatment. Contact Nobel Biocare for further information.
Note: If non-original (non Nobel Biocare) components/instruments are used, no claims can be made as to their safety and efficacy. Warranties relating to Nobel Biocare could be rendered null and void.
Healing Abutment
This device allows the formation of a soft tissue collar around the implant.
Contraindications Should not be used to support a temporary restoration. Cleaning and Sterilization Recommendation The devices are delivered sterile. Opened packages of abutments that have never entered the oral cavity of a patient may be cleaned and steam autoclaved, according to established procedures, at the local hospital or clinic.
Product Facts
Steri-Oss Implant (mm) Healing Abutment Healing Abutment Healing Abutment Healing Abutment 3.25 3.8/4.5 5.0 6.0
Replace Hex Implant (mm) 3.5 4,3 5.0 6.0
Height (mm) 3 3 3 3
Material Ti-Alloy Ti-Alloy Ti-Alloy Ti-Alloy
Supplementary Products: 0.050" Hex Screwdriver For article numbers, see Product Catalog pages 12,16.
English
Direct Abutment, Hexed
NobelEsthetics
English
Direct Abutment, Engaging

This device is first processed by the lab. It is a permanent intra-oral abutment that is secured to the implant for a single screw-retained restoration. It can also be used to fabricate a custom abutment for a cementable restoration. ment is completely seated to confirm the metalto-metal interface.
Procedure After the lab has processed the Direct Abutment, it is tightened with the manual 0.050" hexagon screwdriver. The abutment should interlock with the implants external hex. Before tightening to 35 Ncm, verify with a radiograph that the abut-
Precautions It is imperative that all tissue and bone fragments be removed from the implant interface before seating the Direct Abutment. Professionals using Steri-Oss and Replace Systems should obtain appropriate training and education for their particular level of treatment Contact Nobel Biocare for further information.
Note: If non-original (non Nobel Biocare) components/ instruments are used, no claims can be made as to their safety and efficacy. Warranties relating to Nobel Biocare could be rendered null and void.
Product Facts
Gold/Plastic Direct Abutment, Engaging includes a TorqTite Screw Direct Abutment, Engaging includes a TorqTite Screw Direct Abutment, Engaging includes a TorqTite Screw Direct Abutment, Engaging includes a TorqTite Screw Chemical Composition Element Au Pt Pd Ir % by weight 60 19 20 1
Steri-Oss Implant (mm) 3.25 3.8/4.5 5.0 6.0
Replace Hex Implant (mm) 3.5 4.3 5.0 6.0
Height
(mm)
Material Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (screw) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (screw) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (screw) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (screw)
12 12 12 12
Melting Range 1400 1490 C
Coeff of Thermal Expansion 12.4 m/m K at 600 C
Recommended casting on alloys:
Ceramic bonding alloys: High gold content (min 75% Au) alloys, standard ISO/DIS9693, NIOM type a. Conventional gold alloys: High gold content (min 75% Au + Pt metal), standard ISO 1562 type 4.
Solder working in the range of 800 C is recommended. Plastic Direct Abutment Engaging Plastic includes a TorqTite Screw Steri-Oss Implant (mm) 3.25 3.8/4.5 5.0 6.0 Replace Hex Implant (mm) 3.5 4.3 5.0 6.0 Height
(mm)
Material Plastic Plastic Plastic Plastic
10 10 10 10
Supplementary Products: Open Tray Transfer Assembly, Implant Analog, 0.050" Hex Driver, Polishing Cap For article numbers, see Product Catalog pages 12,16.
NobelEsthetics
Direct Abutment, Non-Hexed
Direct Abutment, Non-Engaging

with the manual 0.050" hexagon screwdriver. Before tightening to 35 Ncm, verify with a radiograph that all abutments are completely seated to confirm the metal-to-metal interface and passive fit.

This device is first processed by the lab. It is intended as a permanent intra-oral abutment secured to the implant for a splinted, multipleunit, screw-retained restoration.
Precautions It is imperative that all tissue and bone fragments be removed from the implant interface before seating the abutment. Professionals using Steri-Oss and Replace Systems should obtain appropriate training and education for their particular level of treatment. Contact Nobel Biocare for further information.
Procedure After the lab has processed the splinted framework/ restoration, it is then placed and tightened
Product Facts
Steri-Oss Implant (mm) Direct Abutment, Non-Engaging includes a TorqTite Screw Direct Abutment, Non-Engaging includes a TorqTite Screw Direct Abutment, Non-Engaging includes a TorqTite Screw Direct Abutment, Non-Engaging includes a TorqTite Screw 5,0 6,0 3,25
Replace Hex Implant (mm) 3,5 4,3 5,0 6,0
Height
(mm)
12 12 12 12
Chemical Composition Element Au Pt Pd Ir % by weight 60 19 20 1
Solder working in the range of 800 C is recommended. Supplementary Products: Open Tray Transfer Assembly, Implant Analog, 0.050" Hex Driver, Polishing Cap For article numbers, see Product Catalog pages 12,16.
English
PME Transmucosal Abutment
NobelEsthetics
English

Procedure Place the PME Transmucosal Abutment with the Transmucosal Abutment Wrench. Verify with a radiograph that the abutment is completely seated to confirm the metal-to-metal interface with the implant. Finish tightening with the torque wrench at 35 Ncm and with the Transmucosal Abutment Insert. Tighten the restoration onto the PME Abutments with coping screws tightened and torqued to 35 Ncm.

This abutment is used for a multiple-unit screwretained prosthesis for an implant with less than a 40 divergent profile.
Contraindications The PME Transmucosal Abutment supports singletooth restorations. Cleaning and Sterilization Recommendation The devices are delivered sterile. Opened packages of abutments that have never entered the oral cavity of a patient may be cleaned and steam autoclaved according to established procedures for similar products at a local hospital or clinic.
Precautions It is imperative that all tissue and bone fragments be removed from the implant interface before seating the PME Transmucosal Abutment. Note that the torque wrench cannot be used to tighten the titanium-healing cap that is placed over the abutment prior to temporization. Professionals using Steri-Oss and Replace Systems should obtain appropriate training and education for their particular level of treatment. Contact Nobel Biocare for further information.
Material Ti-Alloy (abutment) Ti-Alloy coping screw Ti-Alloy (abutment) Ti-Alloy coping screw Ti-Alloy (abutment) Ti-Alloy coping screw Material Ti-Alloy (abutment) Ti-Alloy coping screw Ti-Alloy (abutment) Ti-Alloy coping screw Ti-Alloy (abutment) Ti-Alloy coping screw
Product Facts
Steri-Oss Steri-Oss Replace Hex Replace Hex Implant (mm) Height (mm) Implant (mm) Height (mm) PME Transmucosal Abutment includes healing cap PME Transmucosal Abutment includes healing cap PME Transmucosal Abutment includes healing cap 3.25 3.8/4.5 5.0 3.75, 5 3,4,5 3.25, 4,25, 5.25 3.5 4.3 5.0 3.5, 4.5, 5.5 3.25, 4.25, 5.25 3.25, 4.25, 5.25
Steri-Oss Steri-Oss Replace Replace Select Non-Hex Non-Hex Select Implant (mm) Height (mm) Implant (mm) Height (mm) PME Transmucosal Abutment includes healing cap screw PME Transmucosal Abutment includes healing cap screw PME Transmucosal Abutment includes healing cap screw 3.25 3.8 3 2,3,4 3.5 4.3 5.0 2,3,4,5 2,3,4,5 2,3,4,5
Supplementary Products: Impression Coping Open Tray, PME Abutment Analog, PME Coping, Gold Plastic, Hexed Coping Transmucosal Screws, Slotted Coping Screws, PME Temporary Coping, Transmucosal Abutment Wrench, Torque Wrench Insert, Transmucosal Abutment. For article numbers, see Product Catalog pages 13,15,17.
NobelEsthetics
O-Ring Abutment
O-Ring Abutment
Procedure Place the O-Ring Abutment. Verify with a radiograph that the abutment is completely seated to confirm the metal-to-metal interface. Tighten to 35 Ncm. Take an impression directly over the O-Ring Abutment and send to a lab. Relieve the denture over the abutment, if necessary. Place the denture and check occlusion. Precautions It is imperative that all tissue and bone fragments be removed from the implant interface before seating the O-Ring Abutment. Professionals using Steri-Oss and Replace Systems should obtain appropriate training and education for their particular level of treatment. Contact Nobel Biocare for further information.
O-Ring Abutment
This abutment is a permanent intra-oral abutment secured to the implant for implant-retained, tissue-supported overdentures, typically with two or more relatively parallel (<10) implants.
Contraindications The O-Ring Abutment supports single-tooth restorations and/or implants less than 13 mm in length. Cleaning and Sterilization Recommendation The devices are delivered sterile. Opened packages of abutments that have never entered the oral cavity of a patient may be cleaned and steam autoclaved according to established procedures for similar products at a local hospital or clinic.
Product Facts
Steri-Oss Implant (mm) O-Ring Abutment O-Ring Abutment O-Ring Abutment *4 mm only available for 3.8 /4.5 Steri-Oss Non-Hex Implant (mm) O-Ring Abutment O-Ring Abutment 3.8 3.25 3.25 3.8/4.5
Replace Hex Implant (mm) 3.5 4.3 5.0
Height
(mm)
Material Ti-Alloy (abutment) Ti-Alloy (abutment) Ti-Alloy (abutment)
2.5, 4 2,3,4* 2
Steri-Oss Non-Hex Height (mm) 2 2
Material Ti-Alloy Ti-Alloy
Supplementary Products: O-Ring Abutment Analog and Spacer, White Clinical O-Rings, Retainer Rings Note: O-Rings and Retainer Rings must be purchased separately. For article numbers, see Product Catalog pages 14,17.
English
Transfer Impression
NobelEsthetics
English
Transfer Impression
0.050" hex driver. Verify with a radiograph that the abutment is completely seated to confirm the metal-to-metal interface. Record an impression using a tray with a window cut out above the assembly. The retaining screw must protrude through the opening of the impression tray and be clearly visible. After the material has set, loosen and remove the impression.
Transfer Impression
This device is used when the location, angulation of the hex or internal chamber of the implant will be transferred to a diagnostic model. The implant impression will give the lab a working model of the implant.
Precautions It is imperative that all tissue and bone fragments be removed from the implant interface before seating the Transfer Impression. Professionals using Steri-Oss and Replace Systems should obtain appropriate training and education for their particular level of treatment. Contact Nobel Biocare for further information.
Contraindications The Transfer Impression must not be used as a temporary abutment. Procedure Place the appropriate Open-Tray Transfer Assembly over the implant and tighten with the
Product Facts
Steri-Oss Non-Hex Steri-Oss Steri-Oss Implant (mm) Implant (mm) (mm) Transfer Impression Components Open Tray Transfer Impression Components Open Tray Transfer Impression Components Open Tray Transfer Impression Components Open Tray Transfer Impression Components Open Tray 3.25 3.25 3.8/4.5 5.0 6.0 4.5 4.5 6.0 6.0
Replace Hex Replace Hex Material Implant (mm) (mm) 3.5 4.3 5.0 6.0 3.5 4.5 6.0 6.0 Ti-Alloy Ti-Alloy Ti-Alloy Ti-Alloy Ti-Alloy
Supplementary Products: 0.050" Hex Screwdriver For article numbers, see Product Catalog pages 14,18.
10
NobelEsthetics
Conical Abutment Gold Coping

Professionals using Steri-Oss and Replace Systems should obtain appropriate training and education for their particular level of treatment. Contact Nobel Biocare for further information. Note: If non-original (non Nobel Biocare) components/instruments are used, no claims can be made as to their safety and efficacy. Warranties relating to Nobel Biocare could be rendered null and void.

The copings are incorporated in final prosthetic restoration by casting on procedure or soldering.
Product Facts
Steri-Oss Implant (mm) Conical Abutment, Gold Coping Conical Abutment, Gold Coping 3.25 3.8/4.5
Material Gold Alloy Gold Alloy
Chemical Composition Element Au Pt Pd Ir % by weight 60 19 20 1
Solder working in the range of 800 C is recommended. Supplementary Products: 0.050" Hex Screwdriver, Analog Conical Abutment For article numbers, see Product Catalog page 18.
11
English
Product Catalog Replace External Hex
NobelEsthetics
English
Product Catalog
Replace External Hex
Article Number Component Old Article Number
Healing Abutments
35300 43300 5013 6100 Healing Abutment Healing Abutment Healing Abutment Healing Abutment 3.5 3 mm, 3.5 mm Replace Hex 4.5 3 mm, 4.3 mm Replace Hex 6 3 mm, 5.0 mm HL/Replace Hex 6 3 mm, 6.0 mm HL/Replace Hex
Supplementary Products 2085 Screwdriver Hex 0.050" Length 0.7" 2086 Screwdriver Hex 0.050" Length 1.25"
Direct Abutment 3.5 mm

35511 35512 35513 Direct Abutment Engaging Gold/Plastic, 3.5 Replace Hex Direct Abutment Engaging Plastic, 3.5 Replace Hex Direct Abutment Non-Engaging Gold/Plastic, 3.5 Replace Hex
4.3 mm
43511 43512 43513 Direct Abutment Engaging Gold/Plastic, 4.3 Replace Hex Direct Abutment Engaging Plastic, 4.3 Replace Hex Direct Abutment Non-Engaging Gold/Plastic, 4.3 Replace Hex
5.0 mm
5029 5100 5101 Direct Abutment Engaging Plastic, 5.0 HL/Replace Hex Direct Abutment Engaging Gold/Plastic, 5.0 HL/Replace Hex Direct Abutment Non-Engaging Gold/Plastic, 5.0 HL/Replace Hex
6.0 mm
6105 6106 6107 Direct Abutment Engaging Gold/Plastic, 6.0 HL/Replace Hex Direct Abutment Non-Engaging Gold/Plastic, 6.0 HL/Replace Hex Direct Abutment Engaging Plastic, 6.0 HL/Replace Hex
Supplementary Products 31532 Transfer Assembly Hex Open Tray 4.5 mmD, 4.3 Replace Hex 43714 Implant Analog 4.3 Replace Hex 43708 Polishing Cap Implant 4.3 Replace Hex 4/pkg 2085 Screwdriver Hex 0.050" Length 0.75" 2086 Screwdriver Hex 0.050" Length 1.25"
43702
12
NobelEsthetics
Article Number
Component
Old Article Number
PME Transmucosal Abutment 3.5 mm

61550 61551 61552 PME Transmucosal Abutment 3.5 mmH, 3.5 Replace Hex PME Transmucosal Abutment 4.5 mmH, 3.5 Replace Hex PME Transmucosal Abutment 5.5 mmH, 3.5 Replace Hex
4.3 mm
61553 61554 61555 PME Transmucosal Abutment 3.25 mmH, 4.3 Replace Hex PME Transmucosal Abutment 4.25 mmH, 4.3 Replace Hex PME Transmucosal Abutment 5.25 mmH, 4.3 Replace Hex
5.0 mm
61943 61944 61945 PME Transmucosal Abutment 3.25 mmH, 5.0 HL/Replace Hex PME Transmucosal Abutment 4.25 mmH, 5.0 HL/Replace Hex PME Transmucosal Abutment 5.25 mmH, 5.0 HL/Replace Hex
Supplementary Products 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm 2129 Transmucosal Abutment Wrench 2476 Torque Wrench Insert Transmucosal Abutment
2128 2117
2122
13
English
NobelEsthetics
English

O-Ring Abutment 3.5 mm

31553 31554 O-Ring Abutment 2.5 mmH, 3.5 mm Replace Hex O-Ring Abutment 4.0 mmH, 3.5 mm Replace Hex 35601 35602
4.3 mm
31555 31556 O-Ring Abutment 2 mmH, 4.3 mm Replace Hex O-Ring Abutment 3 mmH, 4.3 mm Replace Hex 43600 43601
5.0 mm
31557 O-Ring Abutment 2 mmH, 5.0 mm Replace Hex 50600 Supplementary Products 2493 O-Ring Abutment Analog w/Spacer 2/pkg 2078 O-Ring Clinical White 12/pkg 2413 Retaining Ring 2/pkg
Transfer Impression Components 3.5 mm

31531 Transfer Assembly Hex Open Tray 3.5 mmD, 3.5 Replace Hex 35702
4.3 mm
31532 Transfer Assembly Hex Open Tray 4.5 mmD, 4.3 Replace Hex 43702
5.0 mm
31533 Transfer Assembly Hex Open Tray 6.0 mmD, 5.0 HL/Replace Hex 5049
6.5 mm
31534 Transfer Assembly Hex Open Tray 6.0 mmD, 6.0 HL/Replace Hex 60701 Supplementary Products 2085 Screwdriver Hex 0.050" Length 0.75" 2086 Screwdriver Hex 0.050" Length 1.25"
14
NobelEsthetics
Product Catalog Replace Select
Replace Select
PME Transmucosal Abutment 3.5 mm

61120 61158 61159 61160 PME Transmucosal Abutment Select NP 2 mm PME Transmucosal Abutment Select NP 3 mm PME Transmucosal Abutment Select NP 4 mm PME Transmucosal Abutment Select NP 5 mm
4.3 mm
61128 61161 61162 61163 PME Transmucosal Abutment Select RP 2 mm PME Transmucosal Abutment Select RP 3 mm PME Transmucosal Abutment Select RP 4 mm PME Transmucosal Abutment Select RP 5 mm
5.0 mm
61946 61947 61948 61949 PME Transmucosal Abutment Select WP 2 mm PME Transmucosal Abutment Select WP 3 mm PME Transmucosal Abutment Select WP 4 mm PME Transmucosal Abutment Select WP 5 mm
Supplementary Products 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm
2128 2117
2122
15
English
Product Catalog Steri-Oss
NobelEsthetics
English
Steri-Oss
Healing Abutments 3.25 mm

2385 Healing Abutment 4.5 3 mm, 3.25 mm HL Healing Abutment, 4.5 3 mm, 3.8/4.5 HL Healing Abutment, 6 3 mm, 5.0 HL/Replace Hex Healing Abutment, 6 3 mm, 6.0 HL/Replace Hex
3.8 mm/4.5 mm
2213
5.0 mm
5013
6.0 mm
6100 Supplementary Products 2085 Screwdriver Hex 0.050" Length 0.75" 2086 Screwdriver Hex 0.050" Length 1.25"
Direct Abutment 3.25 mm

2381 2382 2384 Direct Abutment, Engaging, Gold/Plastic 3.25 HL Direct Abutment, Non-Engaging, Gold/Plastic 3.25 HL Direct Abutment, Engaging, Plastic 3.25 HL
3.8 mm/4.5 mm
2284 2262 Direct Abutment, Engaging, Gold/Plastic, 3.8/4.5 HL Direct Abutment, Engaging, Plastic, 3.8/4.5 HL
5.0 mm
5100 5101 5029 Direct Abutment, Engaging, Gold/Plastic, 5.0 HL/Replace Hex Direct Abutment, Non-Engaging, Gold/Plastic, 5.0 HL/Replace Hex Direct Abutment, Engaging, Plastic, 5.0 HL/Replace Hex
6.0 mm
6105 6107 6106 Direct Abutment Engaging, Gold/Plastic, 6.0 HL/Replace Hex Direct Abutment Engaging, Plastic, 6.0 HL/Replace Hex Direct Abutment Non-Engaging, Gold/Plastic, 6.0 HL/Replace Hex
Supplementary Products 31532 Transfer Assembly Hex Open Tray 4.5 mmD, 4.3 Replace Hex 43714 Implant Analog 4.3 mm/Replace 43708 Polishing Cap Implant 4.3 Replace Hex 4/pkg 2085 Screwdriver Hex 0.050" Length 0.75" 2086 Screwdriver Hex 0.050" Length 1.25"
43702
16
NobelEsthetics
Steri-Oss
PME Transmucosal Abutment (PME Abutments Include Healing Cap) 3.25 mm

2157 2390 2391 PME Transmucosal Abutment 3 mmH, 3.25 mm Non-Hex PME Transmucosal Abutment 3.75 mmH, 3.25 mm HL PME Transmucosal Abutment 5 mmH, 3.25 mm HL
3.8 mm/4.5 mm
2123 2124 2125 2273 2274 2275 PME Transmucosal Abutment 2 mmH, 3.8 mm Non-Hex PME Transmucosal Abutment 3 mmH, 3.8 mm Non-Hex PME Transmucosal Abutment 4 mmH, 3.8 mm Non-Hex PME Transmucosal Abutment 3 mmH, 3.8/4.5 mm HL PME Transmucosal Abutment 4 mmH, 3.8/4.5 mm HL PME Transmucosal Abutment 5 mmH, 3.8/4.5 mm HL
5.0 mm
61943 61944 61945 PME Transmucosal Abutment 3.25 mmH, 5.0 HL/Replace Hex PME Transmucosal Abutment 4.25 mmH, 5.0 HL/Replace Hex PME Transmucosal Abutment 5.25 mmH, 5.0 HL/Replace Hex
Supplementary Products 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm 2129 Transmucosal Abutment Wrench 2476 Torque Wrench Insert Transmucosal Abutment
2128 2117
2122
O-Ring Abutment 3.25 mm

31548 31549 31711 O-Ring Abutment 2.5 mmH, 3.25 mm HL O-Ring Abutment 4.0 mmH, 3.25 mm HL O-Ring Abutment 2 mmH, 3.25 mm Non-Hex 2427 2428 2488
3.8 mm/4.5 mm
31550 31551 31552 31710 O-Ring Abutment 2 mmH, 3.8/4.5 HL O-Ring Abutment 3 mmH, 3.8/4.5 HL O-Ring Abutment 4 mmH, 3.8/4.5 HL O-Ring Abutment 2 mmH, 3.8 mm Non-Hex 2482 2483 2484 2485
Note: O-Rings and Retainer Rings must be purchased separately.
Supplementary Products 2493 O-Ring Abutment Analog w/Spacer 2/pkg 2078 O-Ring Clinical White 12/pkg 2413 Retainer Rings 2/pkg
17
English
NobelEsthetics
English
Steri-Oss
Conical Abutment
2660 Coping Conical Abutment Non-Engaging Gold 3.25/3.8/4.5 HL
Supplementary Products 2688 Analog Conical Abutment 3.25/3.8/4.5 HL
Coronal Screw Sets

2456 2464 Coronal Screw Set 3.25 Non-Hex Coronal Screw Set 3.8 Non-Hex
Supplementary Products 2085 Screwdriver Hex 0.050" Length 0.75" 2472 Torque Wrench Insert Hex 0.050" Short
Transfer Impression Components 3.25 mm

31529 31530 Thread Timed Transfer Pin 3.25 Non-Hex Transfer Assembly Hex Open Tray, 4.5 mmD, 3.25 mm HL 2175 2640
3.8 mm/4.5 mm
31709 Transfer Assembly Hex Open Tray, 4.5 mmD, 3.8/4.5 HL 2317
5.0 mm
31533 Transfer Assembly Hex Open Tray, 6.0 mmD 5.0 mm HL/Replace Hex 5049
6.0 mm
31534 Transfer Assembly Hex Open Tray 6.0 mmD 6.0 HL/Replace Hex 60701 Supplementary Products 2085 Screwdriver Hex 0.050" Length 0.75" 2086 Screwdriver Hex 0.050" Length 1.25"
18
NobelEsthetics
Miscellaneous
Miscellaneous
Screwdrivers
Manual 2080 2082 2085 2086 2129 2431 2432 2476 Machine 2430 2472 2473 61760 Ratchet Ratchet Adapter Screwdriver Hex 0.050" Length 0.75" Screwdriver Hex 0.050" Length 1.25" Transmucosal Abutment Wrench Screwdriver Hex 0.030" Length 0.75" Screwdriver Hex 0.030" Length 1.25" Torque Wrench Insert Transmucosal Abutment
Screwdriver Machine Slot Torque Wrench Insert Hex 0.050" Short Torque Wrench Insert Hex 0.050" Long O-Rings for Tools 2 sets of 5/pkg
Implant Analogs
31706 5052 35706 43714 2687 6129 Implant Analog, Non-Hex Implant Analog, 5.0 HL/Replace Hex Implant Analog, 3.5 mm/Replace Hex Implant Analog, 4.3 mm/Replace Hex Implant Analog, 3.8/4.5 HL Implant Analog, 6.0 HL/Replace Hex 2199
Polishing Caps
35708 43708 50706 Polishing Cap Implant, 3.5 Replace Hex 4/pkg Polishing Cap Implant, 4.3 Replace Hex 4/pkg Polishing Cap Implant, 5.0 Replace Hex 4/pkg
Abutment Analogs
2688 31705 2493 Analog Conical Abutment 3.25/3.8/4.5 HL PME Abutment Analog O-Ring Abutment Analog w Spacer 2/pkg 2128
Surgical and Prosthetic Accessories

2148 2496 29168 29171 Thread Cleaning Tap 3.25/3.8 mm Non-Hex PME Temporary Coping Torque Wrench Multi-unit Adapter Torque Wrench Unigrip Adapter
Abutment Screws
31704 2346 2699 61670 61671 61979 31707 Coping Screw Slot 16 mm Coping Screw Hex 2 mm 4/pkg Abutment Screw TorqTite 3.8/4.3/4.5/5.0/6.0 HL/Replace Hex Abutment Screw Easy Abutment 1 mm Replace Hex Abutment Screw Easy Abutment 2 mm Replace Hex Abutment Screw TorqTite 3.25 HL/3.5 Replace Hex Abutment Screw Slot 3.25 HL/3.5 Replace Hex 2122
62200
19
English
Deutsch
Inhalt
NobelEsthetics
Inhaltsverzeichnis
Einfhrung
Ersatzteile fr Steri-Oss, Replace und Replace Select Systeme . . . . . . . . . . 22
Healing Abutment (Gingivaformer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Direct Abutment, rotationsgesichert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Direct Abutment, nicht rotationsgesichert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 PME Transmucosal Abutment (Transmukosales PME-Abutment) 26 O-Ring Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Abformpfosten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Conical Abutment Gold Coping (Goldkappe fr konisches Abutment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Produktkatalog
Replace External Hex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3032 Replace Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Steri-Oss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3436 Verschiedenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
21
Deutsch
Einfhrung
NobelEsthetics
Einfhrung
Ersatzteile fr Steri-Oss, Replace und Replace Select Systeme Deutsch
Jetzt bietet Nobel Biocare Ihnen eine grere Auswahl unterschiedlicher Lsungen als je zuvor. Nachdem Steri-Oss und Replace Systeme durch neue, verbesserte Alternativen ersetzt wurden, erweitern wir unseren Service und stellen Ihnen die Ersatzteile bereit, die zur Erhaltung der bereits gefertigten Restaurationen erforderlich sind.
Produktdaten
Viele der Ersatzteile unterliegen denselben nderungen wie die gngige Produktpalette, neue Etiketten und Verpackungen eingeschlossen. Einige Produktnamen wurden geringfgig gendert, damit sie mit den gngigen Produkten harmonisieren. Diese nderungen werden nach und nach eingefhrt. C&B&I Eine neue Art zu denken...und zu handeln!
Definition
Ersatzteile sind prothetische Komponenten und Instrumente in der Produktpalette von Nobel Biocare, die zur Erhaltung der bereits gefertigten Restaurationen von Patienten notwendig sind (klinische Anforderung). Achtung: Diese Produkte knnen nicht zurckgegeben werden.
22
NobelEsthetics
Healing Abutment (Gingivaformer)

Vorgehensweise
Der Gingivaformer wird mit dem Sechskantschraubendreher von 0,050 Zoll auf das Implantat geschraubt. Stellen Sie vor dem endgltigen Festziehen anhand eines Rntgenbildes sicher, dass das Abutment vollstndig auf dem Kopf des Implantates sitzt.
Vorsichtsmanahmen
Alle Gewebe- und Knochenreste mssen vor dem Einsetzen des Gingivaformers vom Implantatbergang entfernt werden. Zahnrzte, die Steri-Oss und Replace Systeme verwenden, sollten sich durch entsprechende Schulungen und Fortbildungen auf die jeweilige Behandlungsmethode vorbereiten. Wenden Sie sich an Nobel Biocare, um weitere Informationen zu erhalten. Achtung: Wenn Komponenten/Instrumente von Drittherstellern (nicht von Nobel Biocare) verwendet werden, knnen keine Ansprche hinsichtlich ihrer Sicherheit und Eignung geltend gemacht werden. Garantieansprche gegenber Nobel Biocare knnten dadurch fr null und nichtig erklrt werden.

Dieses Produkt ermglicht die Ausbildung einer Weichgewebemanschette um das Implantat.
Kontraindikationen
Das Produkt sollte nicht zur Untersttzung einer provisorischen Versorgung verwendet werden.
Empfehlungen zum Reinigen und Sterilisieren

Die Produkte werden steril geliefert. Abutments, deren Verpackung geffnet wurde, die aber noch keinen Kontakt zur Mundhhle eines Patienten hatten, knnen entsprechend der blichen klinischen Richtlinien gereinigt und dampfsterilisiert werden.
Produktdaten
Steri-Oss Implantat (mm) Healing Abutment (Gingivaformer) Healing Abutment (Gingivaformer) Healing Abutment (Gingivaformer) Healing Abutment (Gingivaformer) 3,25 3,8/4,5 5,0 6,0
Replace Hex Implantat (mm) 3,5 4,3 5,0 6,0
Hhe (mm) 3 3 3 3
Material Titanlegierung Titanlegierung Titanlegierung Titanlegierung
Ergnzungsprodukte: 0,050-Zoll-Sechskantschraubendreher
Die entsprechenden Artikelnummern finden Sie im Produktkatalog auf den Seiten 12 und 16.
23
Deutsch
Direct Abutment, rotationsgesichert
NobelEsthetics

Dieses Produkt wird zuerst im Labor bearbeitet. Es handelt sich um ein permanentes intraorales Abutment, das fr eine verschraubte Einzelversorgung am Implantat befestigt wird. Es kann auch zur Herstellung eines individuell gefertigten Abutments fr eine Zementierungsversorgung verwendet werden. Abutment vollstndig auf dem Kopf des Implantates sitzt.
Deutsch
Vorsichtsmanahmen
Alle Gewebe- und Knochenreste mssen vor dem Einsetzen des Direct Abutments vom Implantatbergang entfernt werden. Zahnrzte, die Steri-Oss und Replace Systeme verwenden, sollten sich durch entsprechende Schulungen und Fortbildungen auf die jeweilige Behandlungsmethode vorbereiten. Wenden Sie sich an Nobel Biocare, um weitere Informationen zu erhalten. Achtung: Wenn Komponenten/Instrumente von Drittherstellern (nicht von Nobel Biocare) verwendet werden, knnen keine Ansprche hinsichtlich ihrer Sicherheit und Eignung geltend gemacht werden. Garantieansprche gegenber Nobel Biocare knnten dadurch fr null und nichtig erklrt werden.
Hhe (mm) 12 12 12 12 Material Goldlegierung/Kunststoffhlse Titanlegierte TorqTite (Schraube) Goldlegierung/Kunststoffhlse Titanlegierte TorqTite (Schraube) Goldlegierung/Kunststoffhlse Titanlegierte TorqTite (Schraube) Goldlegierung/Kunststoffhlse Titanlegierte TorqTite (Schraube)
Vorgehensweise
Nach der Bearbeitung des Direct Abutments im Labor wird es mit dem manuellen Sechskantschraubendreher von 0,050 Zoll angezogen. Das Abutment sollte ber eine Auensechskantverbindung mit dem Implantat verbunden werden. Stellen Sie vor dem endgltigen Festziehen mit 35 Ncm anhand eines Rntgenbildes sicher, dass das
Produktdaten
Gold/Kunststoff Direct Abutment, rotationsgesichert
Steri-Oss Implantat (mm) 3,25 3,8/4,5 5,0 6,0
einschlielich TorqTite-Schraube einschlielich TorqTite-Schraube einschlielich TorqTite-Schraube einschlielich TorqTite-Schraube
Direct Abutment, rotationsgesichert Direct Abutment, rotationsgesichert Direct Abutment, rotationsgesichert
Chemische Zusammensetzung
Schmelzbereich 1400 1490 C
Wrmeausdehnungskoeffizient 12,4 m/m K bei 600 C
Element
Gold Platin Palladium Iridium
% nach Gewicht
60 19 20 1
Empfohlene Ausbettung fr Legierungen: Adhsivkeramiklegierungen: Legierungen mit hohem Goldanteil (mind. 75 % Gold), Standard ISO/DIS9693, NIOM Typ A. Konventionelle Goldlegierungen: Hoher Goldanteil (mind. 75 % Gold + Platinmetall), Standard ISO 1562 Typ 4.
Ltarbeiten werden im Bereich von 800 C empfohlen.
Kunststoff Direct Abutment Rotationsgesichert Kunststoff
Steri-Oss Implantat (mm) 3,25 3,8/4,5 5,0 6,0
Hhe (mm) 10 10 10 10
Material Kunststoff Kunststoff Kunststoff Kunststoff
einschlielich TorqTite-Schraube
Ergnzungsprodukte: bertragungseinheit mit offenem Lffel, Implantatreplika, 0,050-Zoll-Sechskantschraubendreher, Polierkappe Die entsprechenden Artikelnummern finden Sie im Produktkatalog auf den Seiten 12 und 16.
24
NobelEsthetics
Direct Abutment, nicht rotationsgesichert

ellen Sechskantschraubendreher von 0,050 Zoll eingesetzt und angezogen. Stellen Sie vor dem endgltigen Festziehen mit 35 Ncm anhand eines Rntgenbildes sicher, dass das Abutment vollstndig und passiv (ohne Zwischenraum) auf dem Kopf des Implantates sitzt.
Vorsichtsmanahmen
Alle Gewebe- und Knochenreste mssen vor dem Einsetzen des Abutments vom Implantatbergang entfernt werden. Zahnrzte, die Steri-Oss und Replace Systeme verwenden, sollten sich durch entsprechende Schulungen und Fortbildungen auf die jeweilige Behandlungsmethode vorbereiten. Wenden Sie sich an Nobel Biocare, um weitere Informationen zu erhalten.

Dieses Produkt wird zuerst im Labor bearbeitet. Es dient als permanentes intraorales Abutment, das fr eine verblockte, mehrgliedrige, verschraubte Einzelversorgung am Implantat befestigt wird.
Achtung: Wenn Komponenten/Instrumente von

Drittherstellern (nicht von Nobel Biocare) verwendet werden, knnen keine Ansprche hinsichtlich ihrer Sicherheit und Eignung geltend gemacht werden. Garantieansprche gegenber Nobel Biocare knnten dadurch fr null und nichtig erklrt werden.
Vorgehensweise
Nach der Bearbeitung des verblockten Gersts bzw. Versorgungselements im Labor wird es mit dem manu-
Produktdaten
Steri-Oss Implantat (mm) Direct Abutment, nicht rotationsgesichert
Replace Hex Implantat (mm) 3,5 4,3
Hhe (mm) 12 12 12 12
Material Goldlegierung/Kunststoffhlse Titanlegierte TorqTite (Schraube) Goldlegierung/Kunststoffhlse Titanlegierte TorqTite (Schraube) Goldlegierung/Kunststoffhlse Titanlegierte TorqTite (Schraube) Goldlegierung/Kunststoffhlse Titanlegierte TorqTite (Schraube)
einschlielich TorqTite-Schraube einschlielich TorqTite-Schraube einschlielich TorqTite-Schraube einschlielich TorqTite-Schraube
3,25
Direct Abutment, nicht rotationsgesichert Direct Abutment, nicht rotationsgesichert Direct Abutment, nicht rotationsgesichert 5,0 6,0
5,0 6,0
Chemische Zusammensetzung
Element
% nach Gewicht
60 19 20 1
Empfohlene Ausbettung fr Legierungen: Adhsivkeramiklegierungen: Legierungen mit hohem Goldanteil (mind. 75 % Gold), Standard ISO/DIS9693, NIOM Typ A. Konventionelle Goldlegierungen: Hoher Goldanteil (mind. 75 % Gold + Platinmetall), Standard ISO 1562 Typ 4.
Ltarbeiten werden im Bereich von 800 C empfohlen.

Ergnzungsprodukte: bertragungseinheit mit offenem Lffel, Implantatreplika, 0,050-Zoll-Sechskantschraubendreher, Polierkappe Die entsprechenden Artikelnummern finden Sie im Produktkatalog auf den Seiten 12 und 16.
25
Deutsch
PME Transmucosal Abutment (Transmukosales PME-Abutment)
NobelEsthetics

Vorgehensweise
Setzen Sie das transmukosale PME-Abutment mit der transmukosalen Abutmentratsche ein. Stellen Sie anhand eines Rntgenbildes sicher, dass das Abutment vollstndig auf dem Kopf des Implantates sitzt. Ziehen Sie es schlielich mit der Drehmomentratsche bei 35 Ncm und dem transmukosalen Abutmenteinsatz an. Ziehen Sie die Restauration an den PME-Abutments mit den Abdeckschrauben bei einem Drehmoment von 35 Ncm fest.
Deutsch

Dieses Abutment wird fr eine mehrgliedrige, verschraubte Versorgung fr ein Implantat mit einem Divergenzprofil von weniger als 40 verwendet.
Vorsichtsmanahmen
Alle Gewebe- und Knochenreste mssen vor dem Einsetzen des transmukosalen PME-Abutments vom Implantatbergang entfernt werden. Beachten Sie, dass die Drehmomentratsche nicht zum Festziehen der Titaneinheilungskappe verwendet werden kann, die vor der provisorischen Versorgung ber dem Abutment eingesetzt wird. Zahnrzte, die Steri-Oss und Replace Systeme verwenden, sollten sich durch entsprechende Schulungen und Fortbildungen auf die jeweilige Behandlungsmethode vorbereiten. Wenden Sie sich an Nobel Biocare, um weitere Informationen zu erhalten. Achtung: Wenn Komponenten/Instrumente von Drittherstellern (nicht von Nobel Biocare) verwendet werden, knnen keine Ansprche hinsichtlich ihrer Sicherheit und Eignung geltend gemacht werden. Garantieansprche gegenber Nobel Biocare knnten dadurch fr null und nichtig erklrt werden.
Material Titanlegierung (Abutment) Titanlegierte Abdeckschraube Titanlegierung (Abutment) Titanlegierte Abdeckschraube Titanlegierung (Abutment) Titanlegierte Abdeckschraube
Kontraindikationen
Das transmukosale PME-Abutment untersttzt Einzelzahnversorgungen.

Die Produkte werden steril geliefert. Abutments, deren Verpackung geffnet wurde, die aber noch keinen Kontakt zur Mundhhle eines Patienten hatten, knnen entsprechend der blichen klinischen Richtlinien fr hnliche Produkte gereinigt und dampfsterilisiert werden.
Produktdaten
Steri-Oss Steri-Oss Replace Hex Replace Hex Implantat (mm) Hhe (mm) Implantat (mm) Hhe (mm) PME Transmucosal Abutment (Transmukosales PME-Abutment) 3,25 3,75, 5 3,5 3,5, 4,5, 5,5
einschlielich Einheilungskappe
PME Transmucosal Abutment (Transmukosales PME-Abutment) PME Transmucosal Abutment (Transmukosales PME-Abutment)
3,8/4,5
3,4,5
4,3
3,25, 4,25, 5,25 3,25, 4,25, 5,25 Replace Select Hhe (mm) 2,3,4,5
5,0
3,25, 4,25, 5,25
5,0
Steri-Oss Steri-Oss Replace Non-Hex Non-Hex Select Implantat (mm) Hhe (mm) Implantat (mm) PME Transmucosal Abutment (Transmukosales PME-Abutment) 3,25 einschlielich Einheilungskappenschraube PME Transmucosal Abutment (Transmukosales PME-Abutment) einschlielich Einheilungskappenschraube PME Transmucosal Abutment (Transmukosales PME-Abutment) einschlielich Einheilungskappenschraube 3,8 3 3,5
Material Titanlegierung (Abutment) Titanlegierte Abdeckschraube Titanlegierung (Abutment) Titanlegierte Abdeckschraube Titanlegierung (Abutment) Titanlegierte Abdeckschraube
2,3,4
4,3
2,3,4,5
5,0
2,3,4,5
Ergnzungsprodukte: Offener Lffel fr Abformpfosten, PME-Abutment-Replika, PME-Kappe, Gold/Kunststoff, transmukosale Sechskantabdeckschrauben, Schlitzabdeckschrauben, provisorische PME-Kappe, transmukosale Abutmentratsche, Drehmomentratscheneinsatz, transmukosales Abutment. Die entsprechenden Artikelnummern finden Sie im Produktkatalog auf den Seiten 13, 15 und 17. 26
NobelEsthetics
O-Ring Abutment
O-Ring Abutment
Vorgehensweise
Setzen Sie das O-Ring Abutment ein. Stellen Sie anhand eines Rntgenbildes sicher, dass das Abutment vollstndig auf dem Kopf des Implantates sitzt. Ziehen Sie es auf 35 Ncm an. Erstellen Sie direkt ber dem O-Ring Abutment eine Abformung und senden Sie diese an ein Labor. Nehmen Sie die Prothese ber dem Abutment bei Bedarf ab. Setzen Sie die Prothese ein und prfen Sie die Okklusion.
Vorsichtsmanahmen
O-Ring Abutment
Bei diesem Abutment handelt es sich um ein permanentes intraorales Abutment, das fr implantatgetragene, gewebegesttzte Deckprothesen am Implantat befestigt wird; in der Regel werden mindestens zwei relativ parallele Implantate (<10) verwendet.
Kontraindikationen
Das O-Ring Abutment untersttzt Einzelzahnversorgungen und/oder Implantate mit einer Lnge von weniger als 13 mm.
Alle Gewebe- und Knochenreste mssen vor dem Einsetzen des O-Ring Abutments vom Implantatbergang entfernt werden. Zahnrzte, die Steri-Oss und Replace Systeme verwenden, sollten sich durch entsprechende Schulungen und Fortbildungen auf die jeweilige Behandlungsmethode vorbereiten. Wenden Sie sich an Nobel Biocare, um weitere Informationen zu erhalten. Achtung: Wenn Komponenten/Instrumente von Drittherstellern (nicht von Nobel Biocare) verwendet werden, knnen keine Ansprche hinsichtlich ihrer Sicherheit und Eignung geltend gemacht werden. Garantieansprche gegenber Nobel Biocare knnten dadurch fr null und nichtig erklrt werden.

Die Produkte werden steril geliefert. Abutments, deren Verpackung geffnet wurde, die aber noch keinen Kontakt zur Mundhhle eines Patienten hatten, knnen entsprechend der blichen klinischen Richtlinien fr hnliche Produkte gereinigt und dampfsterilisiert werden.
Produktdaten
Steri-Oss Implantat (mm) O-Ring Abutment O-Ring Abutment O-Ring Abutment *4 mm nur fr 3,8/4,5 verfgbar Steri-Oss Non-Hex Implantat (mm) O-Ring Abutment O-Ring Abutment 3,8 3,25 3,25 3,8/4,5
Replace Hex Implantat (mm) 3,5 4,3 5,0
Hhe (mm) 2, 5, 4 2, 3, 4* 2
Material Titanlegierung (Abutment) Titanlegierung (Abutment) Titanlegierung (Abutment)
Steri-Oss Non-Hex Hhe (mm) 2 2
Material Titanlegierung Titanlegierung
Ergnzungsprodukte: Replika und Spacer fr O-Ring Abutment, weie klinische O-Ringe, Befestigungsringe
Achtung: O-Ringe und Befestigungsringe mssen separat bestellt werden. Die entsprechenden Artikelnummern finden Sie im Produktkatalog auf den Seiten 14 und 17.
27
Deutsch
Abformpfosten
NobelEsthetics
Abformpfosten
sicher, dass das Abutment vollstndig auf dem Kopf des Implantates sitzt. Fhren Sie eine Abformung unter Verwendung eines individuell gefertigten Abformlffels mit ausgeschnittenem Fenster ber dem Implantat und Abformpfosten durch. Die Sicherungsschrauben mssen durch die ffnung des Abformlffels hindurchragen und deutlich sichtbar sein. Nach dem Aushrten des Materials lsen und entfernen Sie die Verschraubung und die Abformung.
Deutsch
Vorsichtsmanahmen
Abformpfosten
Dieses Produkt wird verwendet, wenn die Position bzw. der Winkel der Sechskant- oder Internhhe des Implantats auf ein Diagnosemodell bertragen wird. Die Implantatabformung bietet dem Labor ein Arbeitsmodell des Implantats.
Kontraindikationen
Der Abformpfosten darf nicht als provisorisches Abutment verwendet werden.
Alle Gewebe- und Knochenreste mssen vor dem Einsetzen des Abformpfostens vom Implantatbergang entfernt werden. Zahnrzte, die Steri-Oss und Replace Systeme verwenden, sollten sich durch entsprechende Schulungen und Fortbildungen auf die jeweilige Behandlungsmethode vorbereiten. Wenden Sie sich an Nobel Biocare, um weitere Informationen zu erhalten. Achtung: Wenn Komponenten/Instrumente von Drittherstellern (nicht von Nobel Biocare) verwendet werden, knnen keine Ansprche hinsichtlich ihrer Sicherheit und Eignung geltend gemacht werden. Garantieansprche gegenber Nobel Biocare knnten dadurch fr null und nichtig erklrt werden.
Vorgehensweise
Setzen Sie einen individuell gefertigten Abformlffel fr offene Abformung ber dem Implantat ein. Ziehen Sie den Abformpfosten mit dem Sechskantschraubendreher von 0,050 Zoll an. Stellen Sie anhand eines Rntgenbildes
Produktdaten
Steri-Oss Non-Hex Steri-Oss Steri-Oss Implantat (mm) Implantat (mm) (mm)

Abformpfosten Komponenten Offener Lffel Abformpfosten Komponenten Offener Lffel Abformpfosten Komponenten Offener Lffel Abformpfosten Komponenten Offener Lffel Abformpfosten Komponenten Offener Lffel 3,25 3,25 3,8/4,5 5,0 6,0 4,5 4,5 6,0 6,0
Replace Hex Replace Hex Implantat (mm) (mm)

3,5 4,3 5,0 6,0 3,5 4,5 6,0 6,0
Material
Titanlegierung Titanlegierung Titanlegierung Titanlegierung Titanlegierung
Ergnzungsprodukte: 0,050-Zoll-Sechskantschraubendreher Die entsprechenden Artikelnummern finden Sie im Produktkatalog auf den Seiten 14 und 18.
28
NobelEsthetics
Conical Abutment Gold Coping (Goldkappe fr konisches Abutment)

Zahnrzte, die Steri-Oss und Replace Systeme verwenden, sollten sich durch entsprechende Schulungen und Fortbildungen auf die jeweilige Behandlungsmethode vorbereiten. Wenden Sie sich an Nobel Biocare, um weitere Informationen zu erhalten. Achtung: Wenn Komponenten/Instrumente von Drittherstellern (nicht von Nobel Biocare) verwendet werden, knnen keine Ansprche hinsichtlich ihrer Sicherheit und Eignung geltend gemacht werden. Garantieansprche gegenber Nobel Biocare knnten dadurch fr null und nichtig erklrt werden.

Die Kappen werden in die endgltige prothetische Restauration durch Angieen oder Lten integriert.
Produktdaten
Steri-Oss Implantat (mm) Conical Abutment, Gold Coping (Goldkappe fr konisches Abutment) Conical Abutment, Gold Coping (Goldkappe fr konisches Abutment) Chemische Zusammensetzung 3,25 3,8/4,5
Material Goldlegierung Goldlegierung
Element
% nach Gewicht
60 19 20 1
Empfohlene Ausbettung fr Legierungen: Adhsivkeramiklegierungen: Legierungen mit hohem Goldanteil (mind. 75 % Gold), Standard ISO/DIS9693, NIOM Typ A. Konventionelle Goldlegierungen: Hoher Goldanteil (mind. 75 % Gold + Platinmetall), Standard ISO 1562 Typ 4. Ltarbeiten werden im Bereich von 800 C empfohlen. Ergnzungsprodukte: 0,050-Zoll-Sechskantschraubendreher, Replika fr konisches Abutment Die entsprechenden Artikelnummern finden Sie im Produktkatalog auf Seite 18.
29
Deutsch
Produktkatalog Replace External Hex
NobelEsthetics
Produktkatalog
Artikelnummer Komponenten Alte Artikelnummer
Deutsch
Healing Abutments
35300 43300 5013 6100 Healing Abutment Healing Abutment Healing Abutment Healing Abutment 3,5 3 mm, 3,5 mm Replace Hex 4,5 3 mm, 4,3 mm Replace Hex 6 3 mm, 5,0 mm HL/Replace Hex 6 3 mm, 6,0 mm HL/Replace Hex
Ergnzungsprodukte 2085 Screwdriver Hex 0,050" Length 0,7" 2086 Screwdriver Hex 0,050" Length 1,25"
Direct Abutment 3,5 mm

35511 35512 35513 Direct Abutment Engaging Gold/Plastic, 3,5 Replace Hex Direct Abutment Engaging Plastic, 3,5 Replace Hex Direct Abutment Non-Engaging Gold/Plastic, 3,5 Replace Hex
4,3 mm
5,0 mm
5029 5100 5101 Direct Abutment Engaging Plastic, 5,0 HL/Replace Hex Direct Abutment Engaging Gold/Plastic, 5,0 HL/Replace Hex Direct Abutment Non-Engaging Gold/Plastic, 5,0 HL/Replace Hex
6,0 mm
6105 6106 6107 Direct Abutment Engaging Gold/Plastic, 6,0 HL/Replace Hex Direct Abutment Non-Engaging Gold/Plastic, 6,0 HL/Replace Hex Direct Abutment Engaging Plastic, 6,0 HL/Replace Hex
Ergnzungsprodukte 31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace Hex 43714 Implant Analog 4,3 Replace Hex 43708 Polishing Cap Implant 4,3 Replace Hex 4/pkg 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
43702
30
NobelEsthetics
Artikelnummer Komponenten
Alte Artikelnummer
3,5 mm
61550 61551 61552 PME Transmucosal Abutment 3,5 mmH, 3,5 Replace Hex PME Transmucosal Abutment 4,5 mmH, 3,5 Replace Hex PME Transmucosal Abutment 5,5 mmH, 3,5 Replace Hex
4,3 mm
5,0 mm
61943 61944 61945 PME Transmucosal Abutment 3,25 mmH, 5,0 HL/Replace Hex PME Transmucosal Abutment 4,25 mmH, 5,0 HL/Replace Hex PME Transmucosal Abutment 5,25 mmH, 5,0 HL/Replace Hex
Ergnzungsprodukte 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm 2129 Transmucosal Abutment Wrench 2476 Torque Wrench Insert Transmucosal Abutment
2128 2117
2122
31
Deutsch
NobelEsthetics

O-Ring Abutment Deutsch 3,5 mm

31553 31554 O-Ring Abutment 2,5 mmH, 3,5 mm Replace Hex O-Ring Abutment 4,0 mmH, 3,5 mm Replace Hex 35601 35602
4,3 mm
31555 31556 O-Ring Abutment 2 mmH, 4,3 mm Replace Hex O-Ring Abutment 3 mmH, 4,3 mm Replace Hex 43600 43601
5,0 mm
31557 O-Ring Abutment 2 mmH, 5,0 mm Replace Hex 50600 Ergnzungsprodukte 2493 O-Ring Abutment Analog w/Spacer 2/pkg 2078 O-Ring Clinical White 12/pkg 2413 Retaining Ring 2/pkg
Transfer Impression Components 3,5 mm

31531 Transfer Assembly Hex Open Tray 3,5 mmD, 3,5 Replace Hex 35702
4,3 mm
5,0 mm
31533 Transfer Assembly Hex Open Tray 6,0 mmD, 5,0 HL/Replace Hex 5049
6,5 mm
31534 Transfer Assembly Hex Open Tray 6,0 mmD, 6,0 HL/Replace Hex 60701 Ergnzungsprodukte 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
32
NobelEsthetics
Produktkatalog Replace Select
Replace Select
PME Transmucosal Abutment 3,5 mm

4,3 mm
5,0 mm
Ergnzungsprodukte 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm
2128 2117
2122
33
Deutsch
Produktkatalog Steri-Oss
NobelEsthetics
Steri-Oss
Healing Abutments Deutsch 3,25 mm

2385 Healing Abutment 4,5 3 mm, 3,25 mm HL Healing Abutment, 4,5 3 mm, 3,8/4,5 HL Healing Abutment, 6 3 mm, 5,0 HL/Replace Hex Healing Abutment, 6 3 mm, 6,0 HL/Replace Hex
3,8 mm/4,5 mm
2213
5,0 mm
5013
6,0 mm
6100 Ergnzungsprodukte 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

2381 2382 2384 Direct Abutment, Engaging, Gold/Plastic 3,25 HL Direct Abutment, Non-Engaging, Gold/Plastic 3,25 HL Direct Abutment, Engaging, Plastic 3,25 HL
3,8 mm/4,5 mm
2284 2262 Direct Abutment, Engaging, Gold/Plastic, 3,8/4,5 HL Direct Abutment, Engaging, Plastic, 3,8/4,5 HL
5,0 mm
5100 5101 5029 Direct Abutment, Engaging, Gold/Plastic, 5,0 HL/Replace Hex Direct Abutment, Non-Engaging, Gold/Plastic, 5,0 HL/Replace Hex Direct Abutment, Engaging, Plastic, 5,0 HL/Replace Hex
6,0 mm
6105 6107 6106 Direct Abutment Engaging, Gold/Plastic, 6,0 HL/Replace Hex Direct Abutment Engaging, Plastic, 6,0 HL/Replace Hex Direct Abutment Non-Engaging, Gold/Plastic, 6,0 HL/Replace Hex
Ergnzungsprodukte 31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace Hex 43714 Implant Analog 4,3 mm/Replace 43708 Polishing Cap Implant 4,3 Replace Hex 4/pkg 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
43702
34
NobelEsthetics
Steri-Oss
PME Transmucosal Abutment (PME Abutments Include Healing Cap) 3,25 mm

2157 2390 2391 PME Transmucosal Abutment 3 mmH, 3,25 mm Non-Hex PME Transmucosal Abutment 3,75 mmH, 3,25 mm HL PME Transmucosal Abutment 5 mmH, 3,25 mm HL
3,8 mm/4,5 mm
2123 2124 2125 2273 2274 2275 PME Transmucosal Abutment 2 mmH, 3,8 mm Non-Hex PME Transmucosal Abutment 3 mmH, 3,8 mm Non-Hex PME Transmucosal Abutment 4 mmH, 3,8 mm Non-Hex PME Transmucosal Abutment 3 mmH, 3,8/4,5 mm HL PME Transmucosal Abutment 4 mmH, 3,8/4,5 mm HL PME Transmucosal Abutment 5 mmH, 3,8/4,5 mm HL
5,0 mm
Ergnzungsprodukte 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm 2129 Transmucosal Abutment Wrench 2476 Torque Wrench Insert Transmucosal Abutment
2128 2117
2122
O-Ring Abutment 3,25 mm

31548 31549 31711 O-Ring Abutment 2,5 mmH, 3,25 mm HL O-Ring Abutment 4,0 mmH, 3,25 mm HL O-Ring Abutment 2 mmH, 3,25 mm Non-Hex 2427 2428 2488
3,8 mm/4,5 mm
31550 31551 31552 31710 O-Ring Abutment 2 mmH, 3,8/4,5 HL O-Ring Abutment 3 mmH, 3,8/4,5 HL O-Ring Abutment 4 mmH, 3,8/4,5 HL O-Ring Abutment 2 mmH, 3,8 mm Non-Hex 2482 2483 2484 2485
Achtung: O-Ringe und Befestigungsringe mssen separat bestellt werden,
Ergnzungsprodukte 2493 O-Ring Abutment Analog w/Spacer 2/pkg 2078 O-Ring Clinical White 12/pkg 2413 Retainer Rings 2/pkg
35
Deutsch
NobelEsthetics
Steri-Oss
Conical Abutment Deutsch

2660 Coping Conical Abutment Non-Engaging Gold 3,25/3,8/4,5 HL
Ergnzungsprodukte 2688 Analog Conical Abutment 3,25/3,8/4,5 HL
Coronal Screw Sets

2456 2464 Coronal Screw Set 3,25 Non-Hex Coronal Screw Set 3,8 Non-Hex
Ergnzungsprodukte 2085 Screwdriver Hex 0,050" Length 0,75" 2472 Torque Wrench Insert Hex 0,050" Short

31529 31530 Thread Timed Transfer Pin 3,25 Non-Hex Transfer Assembly Hex Open Tray, 4,5 mmD, 3,25 mm HL 2175 2640
3,8/4,5 mm
31709 Transfer Assembly Hex Open Tray, 4,5 mmD, 3,8/4,5 HL 2317
5,0 mm
31533 Transfer Assembly Hex Open Tray, 6,0 mmD 5,0 mm HL/Replace Hex 5049
6,0 mm
31534 Transfer Assembly Hex Open Tray 6,0 mmD 6,0 HL/Replace Hex 60701 Ergnzungsprodukte 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
36
NobelEsthetics
Verschiedenes
Verschiedenes
Screwdrivers
Manual 2080 2082 2085 2086 2129 2431 2432 2476 Machine 2430 2472 2473 61760 Ratchet Ratchet Adapter Screwdriver Hex 0,050" Length 0,75" Screwdriver Hex 0,050" Length 1,25" Transmucosal Abutment Wrench Screwdriver Hex 0,030" Length 0,75" Screwdriver Hex 0,030" Length 1,25" Torque Wrench Insert Transmucosal Abutment
Screwdriver Machine Slot Torque Wrench Insert Hex 0,050" Short Torque Wrench Insert Hex 0,050" Long O-Rings for Tools 2 sets of 5/pkg
Implant Analogs
31706 5052 35706 43714 2687 6129 Implant Analog, Non-Hex Implant Analog, 5,0 HL/Replace Hex Implant Analog, 3,5 mm/Replace Hex Implant Analog, 4,3 mm/Replace Hex Implant Analog, 3,8/4,5 HL Implant Analog, 6,0 HL/Replace Hex 2199
Polishing Caps
35708 43708 50706 Polishing Cap Implant, 3,5 Replace Hex 4/pkg Polishing Cap Implant, 4,3 Replace Hex 4/pkg Polishing Cap Implant, 5,0 Replace Hex 4/pkg
Abutment Analogs
2688 31705 2493 Analog Conical Abutment 3,25/3,8/4,5 HL PME Abutment Analog O-Ring Abutment Analog w Spacer 2/pkg 2128

2148 2496 29168 29171 Thread Cleaning Tap 3,25/3,8 mm Non-Hex PME Temporary Coping Torque Wrench Multi-unit Adapter Torque Wrench Unigrip Adapter
Abutment Screws
31704 2346 2699 61670 61671 61979 31707 Coping Screw Slot 16 mm Coping Screw Hex 2 mm 4/pkg Abutment Screw TorqTite 3,8/4,3/4,5/5,0/6,0 HL/Replace Hex Abutment Screw Easy Abutment 1 mm Replace Hex Abutment Screw Easy Abutment 2 mm Replace Hex Abutment Screw TorqTite 3,25 HL/3,5 Replace Hex Abutment Screw Slot 3,25 HL/3,5 Replace Hex 2122
62200
37
Deutsch
Espaol
ndice
NobelEsthetics
ndice
Introduccin
Piezas de recambio para los sistemas Steri-Oss, Replace y Replace Select. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Healing Abutment (pilar de cicatrizacin) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Direct Abutment, no rotatorio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Direct Abutment, rotatorio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 PME Transmucosal Abutment (pilar PME) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 O-Ring Abutment (pilar O-Ring) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Transfer Impression (cofia de impresin) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Conical Abutment Gold Coping (cofia de oro pilar cnico) . . . . . . . . . 47 Catlogo de productos
Replace External Hex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4850 Replace Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Steri-Oss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5254 Varios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
39
Espaol
Introduccin
NobelEsthetics
Introduccin
Piezas de recambio para los sistemas Steri-Oss, Replace y Replace Select
Nobel Biocare le ofrece la gama ms amplia de posibilidades. Como los sistemas Steri-Oss y Replace pueden sustituirse por alternativas nuevas y mejoradas, hemos ampliado nuestro servicio para proporcionarle las piezas de recambio necesarias para mantener las restauraciones ya fabricadas.
Datos sobre el producto

Muchas de las piezas de recambio se han modificado o se modificarn para reflejar los mismos cambios que la gama de productos ordinarios, incluyendo etiquetas y envases nuevos. Algunos de los nombres de producto se han modificado ligeramente para que coincidan con los productos ordinarios. Estos cambios se introducen gradualmente. C&B&I A new way to think... and act!
Definicin
Espaol
Las piezas de recambio son componentes protsicos e instrumentos de la gama de productos de Nobel Biocare fundamentales para la conservacin de las restauraciones de los pacientes (demanda clnica). Nota: No se aceptan devoluciones de productos.
40
NobelEsthetics
Healing Abutment
Healing Abutment
Procedimiento
El pilar de cicatrizacin Healing Abutment se conecta al implante mediante el destornillador hexagonal 0,050". Antes del apriete final, compruebe con una radiografa que el pilar est completamente asentado para confirmar la interfase con el implante.
Precauciones
Es fundamental retirar todos los restos de tejido y de hueso de la interfase del implante antes de colocar el pilar de cicatrizacin Healing Abutment. Los profesionales que utilizan los sistemas Steri-Oss y Replace deben obtener la formacin y prcticas adecuadas para el nivel de tratamiento que van a proporcionar. Pngase en contacto con Nobel Biocare para ms informacin. Nota: En caso de no utilizar componentes o instrumentos originales de Nobel Biocare, no se admiten reclamaciones relativas a la seguridad o eficacia de los mismos. Ello puede anular o invalidar las garantas de Nobel Biocare.
Healing Abutment
Este dispositivo permite la formacin de un cuello de tejido blando alrededor del implante.
Contraindicaciones
No debera utilizarse como soporte de una restauracin provisional.
Recomendaciones sobre la limpieza y esterilizacin

Los dispositivos se suministran estriles. Los envases abiertos de pilares que no han entrado en contacto con la cavidad oral de un paciente pueden limpiarse y esterilizarse en autoclave de vapor siguiendo el procedimiento aplicado en el hospital o la clnica.
Steri-Oss Implant (mm) Healing Abutment Healing Abutment Healing Abutment Healing Abutment 3,25 3,8/4,5 5,0 6,0
Altura
(mm)
3 3 3 3
Productos complementarios: 0,050" Hex Screwdriver Para ver los nmeros de referencia, consulte las pginas 12 y 16 del catlogo de productos.
41
Espaol
NobelEsthetics

Direct Abutment, no rotatorio
Este dispositivo se procesa primero en el laboratorio. Es un pilar intraoral permanente que se fija al implante para una restauracin atornillada unitaria. Tambin puede utilizarse para fabricar un pilar personalizado para una restauracin cementada. pilar est completamente asentado para confirmar la interfase con el implante.
Precauciones
Es fundamental retirar todos los restos de tejido y de hueso de la interfase del implante antes de colocar el pilar Direct Abutment. Los profesionales que utilizan los sistemas Steri-Oss y Replace deben obtener la formacin y prcticas adecuadas para el nivel de tratamiento que van a proporcionar. Pngase en contacto con Nobel Biocare para obtener informacin adicional. Nota: En caso de no utilizar componentes o instrumentos originales de Nobel Biocare, no se admiten reclamaciones relativas a la seguridad o eficacia de los mismos. Ello puede anular o invalidar las garantas de Nobel Biocare.
Procedimiento
Espaol
Una vez procesado el pilar Direct Abutment por el laboratorio, se aprieta con el destornillador hexagonal manual 0,050". El pilar debe encajar con el hexgono externo del implante. Antes del apriete a 35 Ncm, compruebe con una radiografa que el
Oro/plstico Direct Abutment, Engaging
Steri-Oss Implant (mm) 3,25 3,8/4,5 5,0 6,0
Altura
(mm)
Material Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (tornillo) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (tornillo) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (tornillo) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (tornillo)
12 12 12 12
incluye TorqTite Screw




Composicin qumica Elemento Au Pt Pd Ir % por peso 60 19 20 1 Intervalo de fusin 1400 1,490 C
Coeficiente de expansin trmica 12,4 m/m K a 600 C
Recomendaciones de colado para las aleaciones:
Aleaciones de adhesin a cermica: Aleaciones de alto contenido en oro (mn. 75% Au), norma ISO/DIS9693, NIOM tipo A. Aleaciones de oro convencionales: Alto contenido en oro (mn. 75% Au + metal Pt), norma ISO 1562 tipo 4.
Se recomienda la utilizacin del soldador a una temperatura alrededor de 800 C. Plstico Direct Abutment Engaging Plstico Steri-Oss Implant (mm) 3,25 3,8/4,5 5,0 6,0 Replace Hex Implant (mm) 3,5 4,3 5,0 6,0 Altura
(mm)
Material Plstico Plstico Plstico Plstico
10 10 10 10
Productos complementarios: Open Tray Transfer Assembly, Implant Analog, 0,050" Hex Driver, Polishing Cap Para ver los nmeros de referencia, consulte las pginas 12 y 16 del catlogo de productos.
42
NobelEsthetics

asentado para confirmar la interfase con el implante y el ajuste pasivo.
Precauciones
Es fundamental retirar todos los restos de tejido y de hueso de la interfase del implante antes de colocar el pilar. Los profesionales que utilizan los sistemas Steri-Oss y Replace deben obtener la formacin y prcticas adecuadas para el nivel de tratamiento que van a proporcionar. Pngase en contacto con Nobel Biocare para ms informacin. Nota: En caso de no utilizar componentes o instrumentos originales de Nobel Biocare, no se admiten reclamaciones relativas a la seguridad o eficacia de los mismos. Ello puede anular o invalidar las garantas de Nobel Biocare.
Direct Abutment, rotatorio

Este dispositivo se procesa primero en el laboratorio. Es un pilar intraoral permanente que se fija al implante en restauraciones ferulizadas, mltiples y atornilladas.
Procedimiento
Una vez procesada la restauracin/estructura ferulizada, se coloca y se aprieta con el destornillador hexagonal manual 0,050". Antes del apriete a 35 Ncm, compruebe con una radiografa que el pilar est completamente
Steri-Oss Implant (mm) Direct Abutment, Non-Engaging 3,25
Replace Hex Implant (mm) 3,5 4,3
Altura
(mm)
Material Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (tornillo) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (tornillo) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (tornillo) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (tornillo)
12 12 12 12


Direct Abutment, Non-Engaging 5,0 6,0 5,0 6,0

Composicin qumica Elemento Au Pt Pd Ir % por peso 60 19 20 1
Intervalo de fusin 1400 1,490 C
Aleaciones de colado recomendadas:
Se recomienda que el trabajo de soldadura se realice en el rango de 800 C. Productos complementarios: Open Tray Transfer Assembly, Implant Analog, 0,050" Hex Driver, Polishing Cap Para ver los nmeros de referencia, consulte las pginas 12 y 16 del catlogo de productos.
43
Espaol
NobelEsthetics

Procedimiento
Coloque el pilar PME Transmucosal Abutment con la llave Transmucosal Abutment Wrench. Compruebe con una radiografa que el pilar est completamente asentado para confirmar la interfase con el implante. Para finalizar, apriete con la llave de torque a 35 Ncm e introduzca el pilar Transmucosal Abutment. Apriete la restauracin en los pilares PME Abutments con cilindros de pilar a un torque de 35 Ncm.
Precauciones

Espaol
Este pilar se utiliza en prtesis mltiples atornilladas para implantes con perfil de divergencia de menos de 40.
Contraindicaciones
El pilar PME Transmucosal Abutment soporta restauraciones unitarias.

Los dispositivos se suministran estriles. Los envases abiertos de pilares que no han entrado en contacto con la cavidad oral de un paciente pueden limpiarse y esterilizarse en autoclave de vapor siguiendo los protocolos establecidos para productos similares del hospital o la clnica.
Es fundamental retirar todos los restos de tejido y de hueso de la interfase del implante antes de colocar el pilar PME Transmucosal Abutment. Tenga en cuenta que la llave de torque no se puede utilizar para ajustar la tapa de cicatrizacin de titanio sobre el pilar antes de la provisionalizacin. Los profesionales que utilizan los sistemas Steri-Oss y Replace deben obtener la formacin y prcticas adecuadas para el nivel de tratamiento que van a proporcionar. Pngase en contacto con Nobel Biocare para ms informacin. Nota: En caso de no utilizar componentes o instrumentos originales de Nobel Biocare, no se admiten reclamaciones relativas a la seguridad o eficacia de los mismos. Ello puede anular o invalidar las garantas de Nobel Biocare.
Steri-Oss Steri-Oss Replace Hex Replace Hex Implant (mm) Altura (mm) Implant (mm) Altura (mm) PME Transmucosal Abutment 3,25 3,8/4,5 5,0 3,75, 5 3,4,5 3,25, 4,25, 5,25 3,5 4,3 5,0 3,5, 4,5, 5,5 3,25, 4,25, 5,25 3,25, 4,25, 5,25 Replace Select Altura (mm) 2,3,4,5 2,3,4,5 2,3,4,5
Material Ti-Alloy (pilar) Ti-Alloy coping screw Ti-Alloy (pilar) Ti-Alloy coping screw Ti-Alloy (pilar) Ti-Alloy coping screw Material Ti-Alloy (pilar) Ti-Alloy coping screw Ti-Alloy (pilar) Ti-Alloy coping screw Ti-Alloy (pilar) Ti-Alloy coping screw
incluye healing cap

incluye healing cap

incluye healing cap
Steri-Oss Steri-Oss Replace Non-Hex Non-Hex Select Implant (mm) Altura (mm) Implant (mm) PME Transmucosal Abutment 3,25 3,8 3 2,3,4 3,5 4,3 5,0
incluye healing cap screw


Productos complementarios: Impression Coping Open Tray, PME Abutment Analog, PME Coping, Gold Plastic, Hexed Coping Transmucosal Screws, Slotted Coping Screws, PME Temporary Coping, Transmucosal Abutment Wrench, Torque Wrench Insert, Transmucosal Abutment.
Para ver los nmeros de referencia, consulte las pginas 13, 15 y 17 del catlogo de productos.
44
NobelEsthetics
O-Ring Abutment
O-Ring Abutment
Procedimiento
Coloque el pilar O-Ring Abutment. Compruebe con una radiografa que el pilar est completamente asentado para confirmar la interfase con el implante. Apriete a 35 Ncm. Tome una impresin directamente sobre el pilar O-Ring Abutment y envela al laboratorio. En caso necesario, rebase la dentadura en la zona del pilar. Coloque la dentadura y compruebe la oclusin.
Precauciones
O-Ring Abutment
Se trata de un pilar permanente intraoral conectado al implante y en el que se fija una sobredentadura implanto mucosoportada, normalmente con dos o ms implantes relativamente paralelos (<10).
Contraindicaciones
El pilar O-Ring Abutment soporta restauraciones unitarias y/o implantes con menos de 13 mm de longitud.
Es fundamental retirar todos los restos de tejido y de hueso de la interfase del implante antes de colocar el pilar O-Ring Abutment. Los profesionales que utilizan los sistemas Steri-Oss y Replace deben obtener la formacin y prcticas adecuadas para el nivel de tratamiento que van a proporcionar. Pngase en contacto con Nobel Biocare para ms informacin. Nota: En caso de no utilizar componentes o instrumentos originales de Nobel Biocare, no se admiten reclamaciones relativas a la seguridad o eficacia de los mismos. Ello puede anular o invalidar las garantas de Nobel Biocare.

Los dispositivos se suministran estriles. Los envases abiertos de pilares que no han entrado en contacto con la cavidad oral de un paciente pueden limpiarse y esterilizarse en autoclave de vapor siguiendo los protocolos establecidos para productos similares del hospital o la clnica.
Steri-Oss Implant (mm) O-Ring Abutment O-Ring Abutment O-Ring Abutment *4 mm slo disponibles para 3,8 /4,5 Steri-Oss Non-Hex Implant (mm) O-Ring Abutment O-Ring Abutment 3,8 3,25 3,25 3,8/4,5
Replace Hex Implant (mm) 3,5 4,3 5,0
Altura
(mm)
Material Ti-Alloy (pilar) Ti-Alloy (pilar) Ti-Alloy (pilar)
2,5, 4 2,3,4* 2
Steri-Oss Non-Hex Altura (mm) 2 2
Productos complementarios: O-Ring Abutment Analog y Spacer, White Clinical O-Rings, Retainer Rings
Nota: O-Rings y Retainer Rings deben adquirirse por separado.

Para ver los nmeros de referencia, consulte las pginas 14 y 17 del catlogo de productos.
45
Espaol
Transfer Impression
NobelEsthetics
Transfer Impression
grafa que el pilar est completamente asentado para confirmar la interfase con el implante. Registre una impresin utilizando una bandeja con una ventana encima del conjunto. El tornillo protsico debe sobresalir a travs de la apertura de la cubeta de impresin y ser claramente visible. Una vez que el material haya fraguado, afloje la impresin y retrela.
Precauciones
Transfer Impression
Espaol
Este dispositivo se utiliza cuando la ubicacin o angulacin del hexgono o la cmara interna del implante se va a transferir a un modelo de diagnstico. La impresin del implante proporcionar al laboratorio un modelo de trabajo del implante.
Es obligatorio retirar todos los restos de tejido y de hueso de la interfase del implante antes de colocar la cofia de impresin Transfer Impression. Los profesionales que utilizan los sistemas Steri-Oss y Replace deben obtener la formacin y prcticas adecuadas para el nivel de tratamiento que van a proporcionar. Pngase en contacto con Nobel Biocare para ms informacin. Nota: En caso de no utilizar componentes o instrumentos originales de Nobel Biocare, no se admiten reclamaciones relativas a la seguridad o eficacia de los mismos. Ello puede anular o invalidar las garantas de Nobel Biocare.
Contraindicaciones
La cofia de impresin Transfer Impression no debe utilizarse como un pilar provisional.
Procedimiento
Coloque el conjunto Open-Tray Transfer Assembly adecuado sobre el implante y apriete con el destornillador 0,050" hex driver. Compruebe con una radio-
Steri-Oss Non-Hex Implant (mm)

Transfer Impression Components Open Tray Transfer Impression Components Open Tray Transfer Impression Components Open Tray Transfer Impression Components Open Tray Transfer Impression Components Open Tray 3,25
Steri-Oss Steri-Oss Implant (mm) (mm)

3,25 3,8/4,5 5,0 6,0 4,5 4,5 6,0 6,0
Replace Hex Replace Hex Material Implant (mm) (mm)

3,5 4,3 5,0 6,0 3,5 4,5 6,0 6,0 Ti-Alloy Ti-Alloy Ti-Alloy Ti-Alloy Ti-Alloy
Productos complementarios: 0,050" Hex Screwdriver Para ver los nmeros de referencia, consulte las pginas 14 y 18 del catlogo de productos.
46
NobelEsthetics

Los profesionales que utilizan los sistemas Steri-Oss y Replace deben obtener la formacin y prcticas adecuadas para el nivel de tratamiento que van a proporcionar. Pngase en contacto con Nobel Biocare para obtener ms informacin. Nota: En caso de no utilizar componentes o instrumentos originales de Nobel Biocare, no se admiten reclamaciones relativas a la seguridad o eficacia de los mismos. Ello puede anular o invalidar las garantas de Nobel Biocare.

Las cofias se incorporan a la restauracin protsica final mediante colado o soldadura.
Steri-Oss Implant (mm) Conical Abutment, Gold Coping Conical Abutment, Gold Coping 3,25 3,8/4,5
Composicin qumica Elemento Au Pt Pd Ir % por peso 60 19 20 1
Intervalo de fusin 1400 1,490 C
Aleaciones de colado recomendadas:
Se recomienda que el trabajo de soldadura se realice en el rango de 800 C. Productos complementarios: 0,050" Hex Screwdriver, Analog Conical Abutment Para ver los nmeros de referencia, consulte la pgina 18 del catlogo de productos.
47
Espaol
Catlogo de productos Replace External Hex
NobelEsthetics
Catlogo de productos
Referencia Descripcin Referencia antigua
Healing Abutments
Espaol
Productos complementarios 2085 Screwdriver Hex 0,050" Length 0,7" 2086 Screwdriver Hex 0,050" Length 1,25"

4,3 mm
5,0 mm
6,0 mm
Productos complementarios 31532 Transfer Assembly Hex Open Tray 4,5mmD, 4,3 Replace Hex 43714 Implant Analog 4,3 Replace Hex 43708 Polishing Cap Implant 4,3 Replace Hex 4/pkg 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
43702
48
NobelEsthetics
Referencia
Descripcin
Referencia antigua

3,5 mm
4,3 mm
5,0 mm
Productos complementarios 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm 2129 Transmucosal Abutment Wrench 2476 Torque Wrench Insert Transmucosal Abutment
2128 2117
2122
49
Espaol
61553 61554 61555
PME Transmucosal Abutment 3,25 mmH, 4,3 Replace Hex PME Transmucosal Abutment 4,25 mmH, 4,3 Replace Hex PME Transmucosal Abutment 5,25 mmH, 4,3 Replace Hex
NobelEsthetics


4,3 mm
Espaol
5,0 mm
31557 O-Ring Abutment 2 mmH, 5,0 mm Replace Hex 50600 Productos complementarios 2493 O-Ring Abutment Analog w/Spacer 2/pkg 2078 O-Ring Clinical White 12/pkg 2413 Retaining Ring 2/pkg

4,3 mm
5,0 mm
6,5 mm
31534 Transfer Assembly Hex Open Tray 6,0 mmD, 6,0 HL/Replace Hex 60701 Productos complementarios 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
50
NobelEsthetics
Catlogo de productos Replace Select
Replace Select

4,3 mm
5,0 mm
Productos complementarios 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm
2128 2117
2122
51
Espaol
61128 61161 61162 61163
PME Transmucosal Abutment Select RP 2 mm PME Transmucosal Abutment Select RP 3 mm PME Transmucosal Abutment Select RP 4 mm PME Transmucosal Abutment Select RP 5 mm
Catlogo de productos Steri-Oss
NobelEsthetics
Steri-Oss
Healing Abutments 3,25 mm

3,8 mm/4,5 mm
2213
5,0 mm
5013
Espaol
6,0 mm
6100 Productos complementarios 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

3,8 mm/4,5 mm
5,0 mm
6,0 mm
Productos complementarios 31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace Hex 43714 Implant Analog 4,3 mm/Replace 43708 Polishing Cap Implant 4,3 Replace Hex 4/pkg 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
43702
52
NobelEsthetics
Steri-Oss

3,8 mm/4,5 mm
5,0 mm
Productos complementarios 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm 2129 Transmucosal Abutment Wrench 2476 Torque Wrench Insert Transmucosal Abutment
2128 2117
2122

3,8 mm/4,5 mm
Nota: O-Rings y Retainer Rings deben adquirirse por separado.
Productos complementarios 2493 O-Ring Abutment Analog w/Spacer 2/pkg 2078 O-Ring Clinical White 12/pkg 2413 Retainer Rings 2/pkg
53
Espaol
NobelEsthetics
Steri-Oss
Conical Abutment
Productos complementarios 2688 Analog Conical Abutment 3,25/3,8/4,5 HL
Coronal Screw Sets
Espaol
2456 2464
Coronal Screw Set 3,25 Non-Hex Coronal Screw Set 3,8 Non-Hex
Productos complementarios 2085 Screwdriver Hex 0,050" Length 0,75" 2472 Torque Wrench Insert Hex 0,050" Short

3,8 mm/4,5 mm
5,0 mm
6,0 mm
31534 Transfer Assembly Hex Open Tray 6,0 mmD 6,0 HL/Replace Hex 60701 Productos complementarios 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
54
NobelEsthetics
Varios
Varios
Screwdrivers
Implant Analogs
Polishing Caps
Abutment Analogs

Abutment Screws
31704 2346 2699 61670 61671 61979 31707 Coping Screw Slot 16 mm Coping Screw Hex 2 mm 4/pkg Abutment Screw TorqTite 3,8/4,3/4,5/5,0/6,0 HL/Replace Hex Abutment Screw Easy Abutment 1 mm Replace Hex Abutment Screw Easy Abutment 2 mm Replace Hex Abutment Screw TorqTite 3,25 HL/3,5 Replace Hex Abutment Screw Slot 3.25 HL/3.5 Replace Hex 2122
62200
55
Espaol
Franais
Table des matires
NobelEsthetics
Table des matires

Introduction
Pices de rechange pour Steri-Oss, Replace et systmes Replace Select . . . . . . . 58
Pilier de cicatrisation Healing Abutment
............................................
59
Pilier anti-rotationnel Direct Abutment, Engaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Pilier rotationnel Direct Abutment, Non-Engaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Pilier transmuqueux PME Transmucosal Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Pilier O-Ring Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Empreinte de transfert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Chape en or pour pilier conique Conical Abutment Gold Coping . . . . . . . . . 65 Catalogue produits
Pilier externe hexagonal Replace External Hex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6668 Pilier Replace Select Steri-Oss
........................................................................
69
..................................................................................
7072
Divers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
57
Franais
Introduction
NobelEsthetics
Introduction
Pices de rechange pour Steri-Oss, Replace et systmes Replace Select
Aujourdhui, plus que jamais, Nobel Biocare vous offre une plus grande varit de produits et de services. Comme les systmes Steri-Oss et Replace peuvent tre remplacs par de nouvelles solutions plus adaptes, nous largirons nos services et proposerons des pices de rechange ncessaires lentretien des restaurations dj effectues. Dfinitions Les pices de rechange sont des instruments et composants prothtiques de la gamme de produits Nobel Biocare, essentiels lentretien des restaurations dj effectues chez les patients (demande clinique).
Remarque : Aucun retour produit nest accept. Donnes sur les produits Un bon nombre de pices de rechange a t soumis ou sera soumis aux mmes changements que la gamme de produits ordinaires, y compris de nouvelles tiquettes et de nouveaux conditionnements. Certains noms de produits ont t lgrement modifis pour sharmoniser avec les produits ordinaires. Ces modifications sont introduites progressivement. C&B&I La nouvelle faon de penser... et dagir !
Franais
58
NobelEsthetics

Protocole Le pilier de cicatrisation Healing Abutment est connect limplant avec le tournevis hexagonal 0,050" (1 mm). Avant le serrage final, vrifier avec une radiographie que le pilier est compltement en place pour confirmer linterface mtallo-mtallique. Prcautions Il est impratif dliminer tous les tissus et fragments osseux de linterface implantaire avant de poser le pilier de cicatrisation. Les professionnels utilisant les systmes Steri-Oss et Replace doivent suivre une formation approprie pour leur niveau particulier de traitement. Contactez Nobel Biocare pour plus dinformations. Remarque : En cas dutilisation de composants/instruments non originaux (non Nobel Biocare), aucune rclamation ne peut tre dpose quant leur scurit et leur efficacit. Les garanties lies Nobel Biocare peuvent alors tre annules.

Ce dispositif permet la formation dun col de tissus mous autour de limplant. Contre-indications Ne doit pas tre utilis pour porter une restauration provisoire. Recommandations pour la strilisation et le nettoyage Les dispositifs sont livrs striles. Les emballages ouverts contenant des piliers qui nont encore jamais t utiliss chez un patient, peuvent tre nettoys et striliss en autoclave conformment aux protocoles en vigueur dans les cliniques ou les hpitaux locaux.
Donnes sur les produits
Steri-Oss Implant (mm) Pilier de cicatrisation Healing Abutment Pilier de cicatrisation Healing Abutment Pilier de cicatrisation Healing Abutment Pilier de cicatrisation Healing Abutment 3,25 3,8/4,5 5,0 6,0
Hauteur
(mm)
Matriau Alliage de titane Alliage de titane Alliage de titane Alliage de titane
3 3 3 3
Autres produits : Tournevis hexagonal 0,050" (1 mm) Pour les rfrences des articles, consulter le Catalogue produits, pages 12, 16.
59
Franais
Pilier Direct Abutment, Hexed
NobelEsthetics
Pilier anti-rotationnel Direct Abutment, Engaging

Ce dispositif est dabord trait par le laboratoire. Il sagit dun pilier intra-oral dfinitif fix sur implant pour une restauration visse unitaire. Il peut galement servir fabriquer un pilier personnalis pour une restauration scellable. Protocole Aprs le traitement du pilier Direct Abutment par le laboratoire, le pilier est viss laide du tournevis hexagonal manuel de 0,050" (1 mm). Le pilier doit tre intgr linterface externe hexagonale de limplant. Avant le serrage 35 Ncm, vrifier avec une radiographie que le pilier est compltement en place pour confirmer linterface mtallo-mtallique. Prcautions Il est impratif dliminer tous les tissus et fragments osseux de linterface implantaire avant de poser le pilier Direct Abutment. Les professionnels utilisant les systmes Steri-Oss et Replace doivent suivre une formation approprie pour leur niveau particulier de traitement. Contactez Nobel Biocare pour plus dinformations. Remarque : En cas dutilisation de composants/instruments non originaux (non Nobel Biocare), aucune rclamation ne peut tre dpose quant leur scurit et leur efficacit. Les garanties lies Nobel Biocare peuvent alors tre annules.
Or/plastique Pilier anti-rotationnel Direct Abutment, Engaging

inclut une vis TorqTite
Steri-Oss Implant (mm) 3,25
Replace Hex Implant (mm) 3,5
Hauteur
(mm)
Matriau Alliage or/Gaine plastique Alliage titane TorqTite (vis) Alliage or/Gaine plastique Alliage titane TorqTite (vis) Alliage or/Gaine plastique Alliage titane TorqTite (vis) Alliage or/Gaine plastique Alliage titane TorqTite (vis)
12
Franais

3,8/4,5
4,3
12

5,0
5,0
12

6,0
6,0
12
Composition chimique lment Au Pt Pd Ir % par poids 60 19 20 1
Plage de fusion 1400 1490 C
Coeff. dexpansion thermique 12,4 m/m K 600 C
Coule recommande sur les alliages : Alliages adhsifs cramique : Alliages haute teneur en or (min 75 % Au), norme ISO/DIS9693, NIOM type a. Alliages traditionnels en or : Haute teneur en or (min 75% Au + Pt mtal), norme ISO 1562 type 4. Il est recommand dutiliser une soudure 800 C. Plastique Direct Abutment Anti-rotationnel Plastique
Hauteur
(mm)
Matriau Plastique Plastique Plastique Plastique
10 10 10 10
Autres produits : Ensemble de transfert pour porte-empreinte ouvert, Analogue dimplant, Tournevis hexagonal 0,050" (1 mm), Capuchon de polissage Pour les rfrences des articles, consulter le Catalogue produits, pages 12,16.
60
NobelEsthetics
Pilier non hexagonal Direct Abutment, Non-Hexed
Pilier rotationnel Direct Abutment, Non-Engaging

du tournevis hexagonal manuel de 0,050" (1mm). Avant le serrage 35 Ncm, vrifier avec une radiographie que les piliers sont compltement en place pour confirmer linterface mtallo-mtallique. Prcautions Il est impratif dliminer tous les tissus et fragments osseux de linterface implantaire avant de poser le pilier. Les professionnels utilisant les systmes Steri-Oss et Replace doivent suivre une formation approprie pour leur niveau particulier de traitement. Contactez Nobel Biocare pour plus dinformations. Remarque : En cas dutilisation de composants/instruments non originaux (non Nobel Biocare), aucune rclamation ne peut tre dpose quant leur scurit et leur efficacit. Les garanties lies Nobel Biocare peuvent alors tre annules.

Ce dispositif est dabord trait par le laboratoire. Il est destin tre utilis comme pilier intra-oral usage permanent viss sur limplant pour une prothse visse plurale relie. Protocole Aprs le traitement par le laboratoire de la restauration /structure relie, lensemble est plac puis viss laide
Steri-Oss Implant (mm) Pilier rotationnel Direct Abutment, Non-Engaging

Hauteur
(mm)
Matriau Alliage or/Gaine plastique Alliage titane TorqTite (vis) Alliage or/Gaine plastique Alliage titane TorqTite (vis) Alliage or/Gaine plastique Alliage titane TorqTite (vis) Alliage or/Gaine plastique Alliage titane TorqTite (vis)
3,25
12

4,3
12

5,0
5,0
12

6,0
6,0
12
Composition chimique lment Au Pt Pd Ir % par poids 60 19 20 1
Plage de fusion 1400 1490 C
Coeff. dexpansion thermique 12,4 m/m K 600 C
Coule recommande sur les alliages : Alliages adhsifs cramique : Alliages haute teneur en or (min 75 % Au), norme ISO/DIS9693, NIOM type a. Alliages traditionnels en or : Haute teneur en or (min 75% Au + Pt mtal), norme ISO 1562 type 4. Il est recommand dutiliser une soudure 800 C. Autres produits : Ensemble de transfert pour porte-empreinte ouvert, Analogue dimplant, Tournevis hexagonal 0,050" (1 mm), Capuchon de polissage Pour les rfrences des articles, consulter le Catalogue produits, pages 12,16.
61
Franais
Pilier transmuqueux PME Transmucosal Abutment
NobelEsthetics

Protocole Placer le pilier transmuqueux PME Transmucosal Abutment avec la cl pour pilier transmuqueux Transmucosal Abutment Wrench. Vrifier avec une radiographie que le pilier est compltement en place pour confirmer linterface mtallo-mtallique avec limplant. Finir le serrage avec la cl torque 35 Ncm et avec linsert pour pilier transmuqueux Transmucosal Abutment Insert. Visser la restauration sur les piliers PME Abutments avec les vis de chapes un couple dinsertion de 35 Ncm. Prcautions Il est impratif dliminer tous les tissus et fragments osseux de linterface implantaire avant de poser le pilier transmuqueux PME Transmucosal Abutment. Il convient de remarquer que la cl torque ne peut pas tre utilise pour visser le capuchon de cicatrisationtitane plac au-dessus du pilier avant la temporisation. Les professionnels utilisant les systmes Steri-Oss et Replace doivent suivre une formation approprie pour leur niveau particulier de traitement. Contactez Nobel Biocare pour plus dinformations. Remarque : En cas dutilisation de composants/instruments non originaux (non Nobel Biocare), aucune rclamation ne peut tre dpose quant leur scurit et leur efficacit. Les garanties lies Nobel Biocare peuvent alors tre annules.
Replace Hex Hauteur(mm) 3,5, 4,5, 5,5 Matriau Alliage de titane (pilier) Vis de chape alliage titane Alliage de titane (pilier) Vis de chape alliage titane Alliage de titane (pilier) Vis de chape alliage titane Matriau

Ce pilier est utilis pour une prothse visse plurale pour un implant ayant un profil de divergence de moins de 40. Contre-indications Le pilier transmuqueux PME Transmucosal Abutment est compatible avec les restaurations unitaires. Recommandations pour la strilisation et le nettoyage Les dispositifs sont livrs striles. Les emballages ouverts contenant des piliers qui nont encore jamais t utiliss chez un patient, peuvent tre nettoys et striliss en autoclave conformment aux protocoles en vigueur dans les cliniques ou les hpitaux locaux, pour des produits similaires.
Franais Donnes sur les produits
Steri-Oss Steri-Oss Replace Hex Implant(mm) Hauteur(mm) Implant(mm) Pilier transmuqueux PME Transmucosal Abutment
inclut un capuchon de cicatrisation
3,25
3,75, 5
3,5

3,8/4,5
3,4,5
4,3
3,25, 4,25, 5,25 3,25, 4,25, 5,25 Replace Slectionnez Hauteur(mm) 2,3,4,5

5,0
3,25, 4,25, 5,25
5,0
Steri-Oss Steri-Oss Replace Non-Hex Non-Hex Slectionnez Implant(mm) Hauteur(mm) Implant(mm) Pilier transmuqueux PME Transmucosal Abutment
inclut une vis de capuchon de cicatrisation
3,25
3,5
Alliage de titane (pilier) Vis de chape alliage titane Alliage de titane (pilier) Vis de chape alliage titane Alliage de titane (pilier) Vis de chape alliage titane

3,8
2,3,4
4,3
2,3,4,5
5,0
2,3,4,5
Autres produits : Transfert dempreinte pour technique porte-empreinte ouvert, analogue de pilier PME Abutment Analog, chape PME Coping, Vis de chape or/plastique Gold Plastic, Hexed Coping Transmucosal Screws, Vis de chape fendues Slotted Coping Screws, Chape provisoire PME Temporary Coping, cl pour pilier transmuqueux Transmucosal Abutment Wrench, Insert de cl torque Torque Wrench Insert, pilier transmuqueux Transmucosal Abutment. Pour les rfrences des articles, consulter le Catalogue produits, pages 13,15,17.
62
NobelEsthetics
Pilier O-Ring Abutment

Protocole Placer le pilier O-Ring Abutment. Vrifier avec une radiographie que le pilier est compltement en place pour confirmer linterface mtallo-mtallique. Visser 35 Ncm. Prendre une empreinte directement au-dessus du pilier O-Ring Abutment et lenvoyer au laboratoire. Dgager le dentier au-dessus du pilier si ncessaire. Placer le dentier et vrifier locclusion. Prcautions Il est impratif dliminer tous les tissus et fragments osseux de linterface implantaire avant de poser le pilier O-Ring Abutment. Les professionnels utilisant les systmes Steri-Oss et Replace doivent suivre une formation approprie pour leur niveau particulier de traitement. Contactez Nobel Biocare pour plus dinformations. Remarque : En cas dutilisation de composants/instruments non originaux (non Nobel Biocare), aucune rclamation ne peut tre dpose quant leur scurit et leur efficacit. Les garanties lies Nobel Biocare peuvent alors tre annules.

Il sagit dun pilier intra-oral usage permanent viss sur limplant pour prothses adjointes supra-implantaires appui implantaire, typiquement avec au moins deux implants relativement parallles (<10). Contre-indications Le pilier O-Ring Abutment est compatible avec des restaurations unitaires et/ou des implants de moins de 13 mm de longueur. Recommandations pour la strilisation et le nettoyage Les dispositifs sont livrs striles. Les emballages ouverts contenant des piliers qui nont encore jamais t utiliss chez un patient, peuvent tre nettoys et striliss en autoclave conformment aux protocoles en vigueur dans les cliniques ou les hpitaux locaux, pour des produits similaires.
Steri-Oss Implant (mm) Pilier O-Ring Abutment Pilier O-Ring Abutment Pilier O-Ring Abutment *4 mm seulement disponible pour 3,8 /4,5 Steri-Oss Non-Hex Implant (mm) Pilier O-Ring Abutment Pilier O-Ring Abutment 3,8 3,25 3,25 3,8/4,5
Hauteur
(mm)
Matriau Alliage de titane (pilier) Alliage de titane (pilier) Alliage de titane (pilier)
2,5,4 2,3,4* 2
Steri-Oss Non-Hex Hauteur (mm) 2 2
Matriau Alliage de titane Alliage de titane
Autres produits : Analogue de pilier et espaceur O-Ring Abutment Analog and Spacer, White Clinical O-Rings, Retainer Rings
Remarque : Les O-rings et Retainer Rings doivent tre achets sparment. Pour les rfrences des articles, consulter le Catalogue produits, pages 14,17.
63
Franais
Empreinte de transfert
NobelEsthetics
visser avec le tournevis hexagonal de 0,050" (1 mm). Vrifier avec une radiographie que le pilier est compltement en place pour confirmer linterface mtallo-mtallique. Prendre une empreinte avec un porte-empreinte comportant une ouverture au-dessus de lensemble. La vis de fixation doit merger travers louverture du porte-empreinte et doit tre clairement visible. Aprs durcissement du matriau, librer et retirer lempreinte. Prcautions Il est impratif dliminer tous les tissus et fragments osseux de linterface implantaire avant de poser lempreinte de transfert. Les professionnels utilisant les systmes Steri-Oss et Replace doivent suivre une formation approprie pour leur niveau particulier de traitement. Contactez Nobel Biocare pour plus dinformations. Remarque : En cas dutilisation de composants/instruments non originaux (non Nobel Biocare), aucune rclamation ne peut tre dpose quant leur scurit et leur efficacit. Les garanties lies Nobel Biocare peuvent alors tre annules.
Ce dispositif est utilis lorsque lemplacement, langulation du pan hexagonal ou de la chambre interne de limplant doivent tre transfrs sur un modle diagnostique. Lempreinte de limplant donnera au laboratoire un modle de travail de limplant. Contre-indications Lempreinte de transfert ne doit pas tre utilise comme pilier provisoire.
Franais
Protocole Placer lensemble appropri pour porte-empreinte ouvert Open-Tray Transfer Assembly au-dessus de limplant et
Steri-Oss Non-Hex Implant (mm) Empreinte de transfert Composants Porte-empreinte ouvert Empreinte de transfert Composants Porte-empreinte ouvert Empreinte de transfert Composants Porte-empreinte ouvert Empreinte de transfert Composants Porte-empreinte ouvert Empreinte de transfert Composants Porte-empreinte ouvert
Steri-Oss Implant (mm) 3,25
Steri-Oss
(mm)
Replace Hex
(mm)
Matriau
4,5
3,5
Alliage de titane
3,8/4,5
4,5
4,3
4,5
Alliage de titane
5,0
6,0
5,0
6,0
Alliage de titane
6,0
6,0
6,0
6,0
Alliage de titane
3,25
Alliage de titane
Autres produits : Tournevis hexagonal 0,050" (1 mm) Pour les rfrences des articles, consulter le Catalogue produits, pages 14,18.
64
NobelEsthetics
Chape en or pour pilier conique Conical Abutment Gold Coping

Les chapes sont intgres dans la restauration prothtique dfinitive par coule lors de lintervention ou soudure. Les professionnels utilisant les systmes Steri-Oss et Replace doivent suivre une formation approprie pour leur niveau particulier de traitement. Contactez Nobel Biocare pour plus dinformations. Remarque : En cas dutilisation de composants/instruments non originaux (non Nobel Biocare), aucune rclamation ne peut tre dpose quant leur scurit et leur efficacit. Les garanties lies Nobel Biocare peuvent alors tre annules.
Steri-Oss Implant (mm) Pilier conique Conical Abutment, Chape en or Gold Coping Pilier conique Conical Abutment, Chape en or Gold Coping Composition chimique lment Au Pt Pd Ir % par poids 60 19 20 1 3,25 3,8/4,5 Plage de fusion 1400 1490 C
Matriau Alliage or Alliage or Coeff. dexpansion thermique 12,4 m/m K 600 C
Coule recommande sur les alliages : Alliages adhsifs cramique : Alliages haute teneur en or (min 75 % Au), norme ISO/DIS9693, NIOM type a. Alliages traditionnels en or : Haute teneur en or (min 75% Au + Pt mtal), norme ISO 1562 type 4. Il est recommand dutiliser une soudure 800 C. Autres produits : Tournevis hexagonal 0,050" Hex Screwdriver, analogue de pilier conique Analog Conical Abutment Pour les rfrences des articles, consulter le Catalogue produits, page 18.
65
Franais
Catalogue produits Replace External Hex
NobelEsthetics
Catalogue produits
Rfrence Composant Ancienne rfrence
Healing Abutments
Autres produits 2085 Screwdriver Hex 0,050" Length 0,7" 2086 Screwdriver Hex 0,050" Length 1,25"

Franais
4,3 mm
5,0 mm
6,0 mm
6105 6106 6107 Autres produits 31532 43714 43708 2085 2086 Direct Abutment Engaging Gold/Plastic, 6,0 HL/Replace Hex Direct Abutment Non-Engaging Gold/Plastic, 6,0 HL/Replace Hex Direct Abutment Engaging Plastic, 6,0 HL/Replace Hex
Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace Hex Implant Analog 4,3 Replace Hex Polishing Cap Implant 4,3 Replace Hex 4/pkg Screwdriver Hex 0,050" Length 0,75" Screwdriver Hex 0,050" Length 1,25"
43702
66
NobelEsthetics
Rfrence
Composant
Ancienne rfrence

4,3 mm
5,0 mm
61943 61944 61945 Autres produits 31705 2149 31708 2496 2346 31704 2129 2476 PME Transmucosal Abutment 3,25 mmH, 5,0 HL/Replace Hex PME Transmucosal Abutment 4,25 mmH, 5,0 HL/Replace Hex PME Transmucosal Abutment 5,25 mmH, 5,0 HL/Replace Hex
PME Abutment Analog PME Coping, Gold/Plastic PME Impression Coping Open Tray PME Temporary Coping Coping Screw Hex 2 mm 4/pkg Coping Screw Slot 16 mm Transmucosal Abutment Wrench Torque Wrench Insert Transmucosal Abutment
2117
2122
67
Franais
2128
NobelEsthetics


4,3 mm
5,0 mm
31557 O-Ring Abutment 2 mmH, 5,0 mm Replace Hex 50600 Autres produits 2493 O-Ring Abutment Analog w/Spacer 2/pkg 2078 O-Ring Clinical White 12/pkg 2413 Retaining Ring 2/pkg
Franais

4,3 mm
5,0 mm
6,5 mm
31534 Transfer Assembly Hex Open Tray 6,0 mmD, 6,0 HL/Replace Hex 60701 Autres produits 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
68
NobelEsthetics
Catalogue produits Replace Select
Replace Select

4,3 mm
5,0 mm
61946 61947 61948 61949 Autres produits 31705 2149 31708 2496 2346 31704 PME Transmucosal Abutment Select WP 2 mm PME Transmucosal Abutment Select WP 3 mm PME Transmucosal Abutment Select WP 4 mm PME Transmucosal Abutment Select WP 5 mm
PME Abutment Analog PME Coping, Gold/Plastic PME Impression Coping Open Tray PME Temporary Coping Coping Screw Hex 2 mm 4/pkg Coping Screw Slot 16 mm
2128 2117
2122
69
Franais
Catalogue produits Steri-Oss
NobelEsthetics
Steri-Oss

3,8 mm/4,5 mm
2213
5,0 mm
5013
6,0 mm
6100 Autres produits 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
Franais

3,8 mm/4,5 mm
5,0 mm
6,0 mm
6105 6107 6106 Autres produits 31532 43714 43708 2085 2086 Direct Abutment Engaging, Gold/Plastic, 6,0 HL/Replace Hex Direct Abutment Engaging, Plastic, 6,0 HL/Replace Hex Direct Abutment Non-Engaging, Gold/Plastic, 6,0 HL/Replace Hex
Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace Hex Implant Analog 4,3 mm/Replace Polishing Cap Implant 4,3 Replace Hex 4/pkg Screwdriver Hex 0,050" Length 0,75" Screwdriver Hex 0,050" Length 1,25"
43702
70
NobelEsthetics
Steri-Oss

3,8 mm/4,5 mm
5,0 mm
61943 61944 61945 Autres produits 31705 2149 31708 2496 2346 31704 2129 2476 PME Transmucosal Abutment 3,25 mmH, 5,0 HL/Replace Hex PME Transmucosal Abutment 4,25 mmH, 5,0 HL/Replace Hex PME Transmucosal Abutment 5,25 mmH, 5,0 HL/Replace Hex
PME Abutment Analog PME Coping, Gold/Plastic PME Impression Coping Open Tray PME Temporary Coping Coping Screw Hex 2 mm 4/pkg Coping Screw Slot 16 mm Transmucosal Abutment Wrench Torque Wrench Insert Transmucosal Abutment
2128 2117
2122

3,8 mm/4,5 mm
Remarque : Les O-rings et Retainer Rings doivent tre achets sparment.
Autres produits 2493 O-Ring Abutment Analog w/Spacer 2/pkg 2078 O-Ring Clinical White 12/pkg 2413 Retainer Rings 2/pkg
71
Franais
NobelEsthetics
Steri-Oss
Conical Abutment
Autres produits 2688 Analog Conical Abutment 3,25/3,8/4,5 HL
Coronal Screw Sets

Autres produits 2085 Screwdriver Hex 0,050" Length 0,75" 2472 Torque Wrench Insert Hex 0,050" Short
Transfer Impression Components Franais 3,25 mm

3,8/4,5 mm
5,0 mm
6,0 mm
31534 Transfer Assembly Hex Open Tray 6,0 mmD 6,0 HL/Replace Hex 60701 Autres produits 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
72
NobelEsthetics
Divers
Divers
Screwdrivers
Implant Analogs
Polishing Caps
Abutment Analogs

Abutment Screws
62200
73
Franais
Italiano
Indice
NobelEsthetics
Indice
Introduzione
Ricambi per i sistemi Steri-Oss, Replace e Replace Select . . . . . . . . . . . . . . . . 76
Healing Abutment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Direct Abutment, Engaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Direct Abutment, Non-Engaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 PME Transmucosal Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 O-Ring Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Transfer Impression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Conical Abutment Gold Coping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Catalogo prodotti
Replace External Hex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8486 Replace Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Steri-Oss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8890 Varie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
75
Italiano
Introduzione
NobelEsthetics
Introduzione
Ricambi per i sistemi Steri-Oss, Replace e Replace Select
Oggi, Nobel Biocare offre una scelta ancora pi ampia. Poich i sistemi Steri-Oss e Replace sono stati sostituiti dalle nuove migliori alternative, abbiamo esteso i nostri servizi e forniamo i ricambi necessari per mantenere le protesi esistenti. Definizioni I ricambi sono componenti e strumenti protesici della gamma di prodotti Nobel Biocare, essenziali per conservare le protesi gi utilizzate dai pazienti (necessit clinica). Nota: Non si accettano restituzioni dei prodotti.
Informazioni sui prodotti Molti ricambi sono stati o saranno soggetti agli stessi cambiamenti della gamma di prodotti normali, comprese nuove etichette e confezioni. Alcuni nomi di prodotto sono stati leggermente modificati per armonizzarsi con i prodotti normali. Questi cambiamenti vengono introdotti gradualmente. C&B&I: un nuovo modo di pensare e agire!
Italiano
76
NobelEsthetics
Healing Abutment
Healing Abutment
Procedura LHealing Abutment viene collegato allimpianto utilizzando un Hexagon Screwdriver 0.050". Prima del serraggio finale, verificare con una radiografia che labutment sia completamente inserito, in modo da confermare linterfaccia metallo-metallo. Precauzioni Prima di inserire lHealing Abutment, essenziale che tutti i frammenti di osso e di tessuto vengano rimossi dallinterfaccia dellimpianto. I professionisti che utilizzano i sistemi Steri-Oss e Replace dovranno ricevere una formazione e un addestramento appropriati allo specifico livello di trattamento. Per ulteriori informazioni, contattare Nobel Biocare. Nota: se si utilizzano componenti o strumenti non originali (non realizzati da Nobel Biocare), non sar possibile effettuare reclami sulla sicurezza e lefficacia dei prodotti. Di conseguenza, la garanzia fornita da Nobel Biocare potrebbe essere invalidata.
Healing Abutment
Questo dispositivo consente la formazione di un colletto gengivale intorno allimpianto. Controindicazioni Non va utilizzato per sostenere una protesi provvisoria. Raccomandazioni relative a pulizia e sterilizzazione I dispositivi vengono forniti sterili. I componenti contenuti in confezioni aperte e non ancora inseriti nella cavit orale di un paziente possono essere puliti e sterilizzati a vapore in autoclave, seguendo le procedure ospedaliere per prodotti simili.
Informazioni sui prodotti
Impianto Impianto Steri-Oss (mm) Replace Hex (mm)
Altezza
(mm)
Materiale
Healing Abutment Healing Abutment Healing Abutment Healing Abutment
3,25 3,8/4,5 5,0 6,0
3,5 4,3 5,0 6,0
3 3 3 3
Ti-Alloy Ti-Alloy Ti-Alloy Ti-Alloy
Prodotti supplementari: Hex Screwdriver 0,050" Per i numeri di articolo, vedere il Catalogo prodotti alle pagine 12 e 16.
77
Italiano
NobelEsthetics

La preparazione iniziale di questo dispositivo viene effettuata in laboratorio. un abutment intraorale permanente che viene fissato allimpianto mediante una protesi avvitata per dente singolo. Pu inoltre essere utilizzato nella fabbricazione di abutment personalizzati per protesi cementabili. Procedura Una volta realizzato in laboratorio, il Direct Abutment viene fissato con il Manual Hexagon Screwdriver 0,050". Labutment dovr interconnettersi con lestremit esterna esagonale dellimpianto. Prima del serraggio a 35 Ncm, verificare con una radiografia che labutment sia completamente inserito, in modo da confermare linterfaccia metallo-metallo. Precauzioni Prima di inserire il Direct Abutment, essenziale che tutti i frammenti di osso e di tessuto vengano rimossi dallinterfaccia dellimpianto. I professionisti che utilizzano i sistemi Steri-Oss e Replace dovranno ricevere una formazione e un addestramento appropriati allo specifico livello di trattamento. Per ulteriori informazioni, contattare Nobel Biocare. Nota: se si utilizzano componenti o strumenti non originali (non realizzati da Nobel Biocare), non sar possibile effettuare reclami sulla sicurezza e lefficacia dei prodotti. Di conseguenza, la garanzia fornita da Nobel Biocare potrebbe essere invalidata.
Altezza
(mm)
Oro/Plastica
Materiale
Direct Abutment, Engaging comprende una TorqTite Screw Direct Abutment, Engaging comprende una TorqTite Screw Direct Abutment, Engaging comprende una TorqTite Screw Direct Abutment, Engaging comprende una TorqTite Screw
Composizione chimica
3,25 3,8/4,5 5,0 6,0
3,5 4,3 5,0 6,0
12 12 12 12
Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (Screw) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (Screw) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (Screw) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (Screw)
Intervallo di fusione
Coefficiente di espansione termica
Italiano
Elemento Au Pt Pd Ir
% in base al peso 60 19 20 1
1400 1490 C
12,4 m/m K a 600 C
Fusioni consigliate per le leghe:
Leghe per ceramica: Leghe ad alto contenuto di oro (min 75% Au), standard ISO/DIS9693, NIOM tipo A. Leghe auree convenzionali: Alto contenuto di oro (metallo min 75% Au + Pt), standard ISO 1562 tipo 4.
Si consiglia di effettuare la saldatura entro un intervallo non superiore a 800 C.

Plastica Impianto Impianto Steri-Oss (mm) Replace Hex (mm) Altezza
(mm)
Materiale
Direct Abutment Engaging Plastica comprende una TorqTite Screw
3,25 3,8/4,5 5,0 6,0
3,5 4,3 5,0 6,0
10 10 10 10
Plastica Plastica Plastica Plastica
Prodotti supplementari: Open Tray Transfer Assembly, Implant Analog, Hex Driver 0,050". Polishing Cap Per i numeri di articolo, vedere il Catalogo prodotti alle pagine 12 e 16.
78
NobelEsthetics

Screwdriver 0,050". Prima del serraggio a 35 Ncm, verificare con una radiografia che tutti gli abutment siano completamente inseriti, in modo da confermare linterfaccia metallo-metallo e ladattamento passivo. Precauzioni Prima di inserire labutment, essenziale che tutti i frammenti di osso e di tessuto vengano rimossi dallinterfaccia dellimpianto. I professionisti che utilizzano i sistemi Steri-Oss e Replace dovranno ricevere una formazione e un addestramento appropriati allo specifico livello di trattamento. Per ulteriori informazioni, contattare Nobel Biocare. Nota: se si utilizzano componenti o strumenti non originali (non realizzati da Nobel Biocare), non sar possibile effettuare reclami sulla sicurezza e lefficacia dei prodotti. Di conseguenza, la garanzia fornita da Nobel Biocare potrebbe essere invalidata.

La preparazione iniziale di questo dispositivo viene effettuata in laboratorio. un abutment intraorale permanente che viene fissato allimpianto mediante una protesi multipla splintata. Procedura Una volta realizzata in laboratorio, la protesi a struttura splintata viene inserita e fissata con il Manual Hexagon
Altezza
(mm)
Materiale
Direct Abutment, Non-Engaging comprende una TorqTite Screw Direct Abutment, Non-Engaging comprende una TorqTite Screw Direct Abutment, Non-Engaging comprende una TorqTite Screw Direct Abutment, Non-Engaging comprende una TorqTite Screw
3,25
3,5 4,3
12 12 12 12
Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (Screw) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (Screw) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (Screw) Gold Alloy/Plastic Sleeve Ti-Alloy TorqTite (Screw)
5,0 6,0
5,0 6,0
1400 1490 C
12,4 m/m K a 600 C
Si consiglia di effettuare la saldatura entro un intervallo non superiore a 800 C. Prodotti supplementari: Open Tray Transfer Assembly, Implant Analog, Hex Driver 0,050". Polishing Cap Per i numeri di articolo, vedere il Catalogo prodotti alle pagine 12 e 16.
79
Italiano
NobelEsthetics

Procedura Posizionare il PME Transmucosal Abutment con il Transmucosal Abutment Wrench. Verificare con una radiografia che labutment sia completamente inserito, in modo da confermare linterfaccia metallo-metallo con limpianto. Completare il serraggio con il torque wrench a 35 Ncm e con il Transmucosal Abutment Insert. Fissare la protesi sui PME Abutment mediante delle Coping Screw, utilizzando un torque di 35 Ncm. Precauzioni Prima di inserire il PME Transmucosal Abutment, essenziale che tutti i frammenti di osso e di tessuto vengano rimossi dallinterfaccia dellimpianto. Si osservi che il torque wrench non pu essere utilizzato per serrare la Healing Cap in titanio che viene applicata sullabutment prima del provvisorio. I professionisti che utilizzano i sistemi Steri-Oss e Replace dovranno ricevere una formazione e un addestramento appropriati allo specifico livello di trattamento. Per ulteriori informazioni, contattare Nobel Biocare. Nota: se si utilizzano componenti o strumenti non originali (non realizzati da Nobel Biocare), non sar possibile effettuare reclami sulla sicurezza e lefficacia dei prodotti. Di conseguenza, la garanzia fornita da Nobel Biocare potrebbe essere invalidata.

Questo abutment viene utilizzato per una protesi multipla avvitata in un impianto dal profilo divergente inferiore a 40. Controindicazioni Il PME Transmucosal Abutment non supporta protesi per denti singoli. Raccomandazioni relative a pulizia e sterilizzazione I dispositivi vengono forniti sterili. Gli abutment presenti in confezioni aperte e non ancora inseriti nella cavit orale di un paziente possono essere puliti e sterilizzati a vapore in autoclave, seguendo le procedure ospedaliere per prodotti simili.
Impianto Steri-Oss
(mm)
Altezza Impianto Altezza Steri-Oss Replace Hex Replace Hex

(mm) (mm) (mm)
Materiale
Italiano
PME Transmucosal Abutment comprende una Healing Cap PME Transmucosal Abutment comprende una Healing Cap PME Transmucosal Abutment comprende una Healing Cap
3,25 3,8/4,5 5,0
3,75, 5 3,4,5 3,25, 4,25, 5,25
3,5 4,3 5,0
3,5, 4,5, 5,5 3,25, 4,25, 5,25 3,25, 4,25, 5,25
Ti-Alloy (abutment) Ti-Alloy Coping Screw Ti-Alloy (abutment) Ti-Alloy Coping Screw Ti-Alloy (abutment) Ti-Alloy Coping Screw Materiale Ti-Alloy (abutment) Ti-Alloy Coping Screw Ti-Alloy (abutment) Ti-Alloy Coping Screw Ti-Alloy (abutment) Ti-Alloy Coping Screw
Impianto Altezza Impianto Altezza Steri-Oss Steri-Oss Replace Replace Non-Hex (mm) Non-Hex (mm) Select (mm) Select (mm) PME Transmucosal Abutment comprende una Healing Cap Screw PME Transmucosal Abutment comprende una Healing Cap Screw PME Transmucosal Abutment comprende una Healing Cap Screw 3,25 3,8 3 2, 3, 4 3,5 4,3 5,0 2, 3, 4,5 2, 3, 4, 5 2, 3, 4, 5
Prodotti supplementari: Impression Coping Open Tray, PME Abutment Analog, PME Coping, Gold Plastic, Hexed Coping Transmucosal Screws, Slotted Coping Screws, PME Temporary Coping, Transmucosal Abutment Wrench, Torque Wrench Insert, Transmucosal Abutment. Per i numeri di articolo, vedere il Catalogo prodotti alle pagine 13,15 e 17.
80
NobelEsthetics
O-Ring Abutment
O-Ring Abutment
Procedura Posizionare lO-Ring Abutment Verificare con una radiografia che labutment sia completamente inserito, in modo da confermare linterfaccia metallo-metallo. Serrare a 35 Ncm. Prendere unimpronta direttamente sullO-Ring Abutment e inviarla al laboratorio. Rimuovere la protesi dallabutment, se necessario. Posizionare la protesi e controllare locclusione. Precauzioni Prima di inserire lO-Ring Abutment, essenziale che tutti i frammenti di osso e di tessuto vengano rimossi dallinterfaccia dellimpianto. I professionisti che utilizzano i sistemi Steri-Oss e Replace dovranno ricevere una formazione e un addestramento appropriati allo specifico livello di trattamento. Per ulteriori informazioni, contattare Nobel Biocare. Nota: se si utilizzano componenti o strumenti non originali (non realizzati da Nobel Biocare), non sar possibile effettuare reclami sulla sicurezza e lefficacia dei prodotti. Di conseguenza, la garanzia fornita da Nobel Biocare potrebbe essere invalidata.
O-Ring Abutment
un abutment intraorale permanente, fissato allimpianto per overdenture ritenute da impianti e supportate dal tessuto, in genere con due o pi impianti relativamente paralleli (<10). Controindicazioni LO-Ring Abutment non supporta protesi per denti singoli e/o impianti di lunghezza inferiore a 13 mm. Raccomandazioni relative a pulizia e sterilizzazione I dispositivi vengono forniti sterili. Gli abutment presenti in confezioni aperte e non ancora inseriti nella cavit orale di un paziente possono essere puliti e sterilizzati a vapore in autoclave, seguendo le procedure ospedaliere per prodotti simili.
Altezza
(mm)
Materiale
O-Ring Abutment O-Ring Abutment O-Ring Abutment
3,25 3,8/4,5
3,5 4.3 5,0
2, 5, 4 2, 3, 4* 2
Ti-Alloy (abutment) Ti-Alloy (abutment) Ti-Alloy (abutment)
*4 mm disponibili solo per i formati 3,8/4,5

Impianto Steri-Oss Non-Hex (mm) Altezza Materiale Steri-Oss Non-Hex (mm)
O-Ring Abutment O-Ring Abutment
3,8 3,25
2 2
Ti-Alloy Ti-Alloy
Prodotti supplementari: O-Ring Abutment Analog e Spacer, White Clinical O-Rings, Retainer Rings Nota: Gli O-Ring e Retainer Ring devono essere acquistati separatamente. Per i numeri di articolo, vedere il Catalogo prodotti alle pagine 14 e 17.
81
Italiano
Transfer Impression
NobelEsthetics
Transfer Impression
inserito, in modo da confermare linterfaccia metallometallo. Prendere unimpronta utilizzando un portaimpronta e lasciare una finestra di spazio libero sui componenti assemblati. La vite di fissaggio dovr sporgere dallapertura del portaimpronta ed essere chiaramente visibile. Una volta posizionato il materiale, rimuovere il portaimpronta. Precauzioni Prima di inserire il Transfer Impression, essenziale che tutti i frammenti di osso e di tessuto vengano rimossi dallinterfaccia dellimpianto. I professionisti che utilizzano i sistemi Steri-Oss e Replace dovranno ricevere una formazione e un addestramento appropriati allo specifico livello di trattamento. Per ulteriori informazioni, contattare Nobel Biocare. Nota: se si utilizzano componenti o strumenti non originali (non realizzati da Nobel Biocare), non sar possibile effettuare reclami sulla sicurezza e lefficacia dei prodotti. Di conseguenza, la garanzia fornita da Nobel Biocare potrebbe essere invalidata.
Transfer Impression
Questo dispositivo viene utilizzato quando la posizione, langolazione dellesagono o la camera interna dellimpianto devono essere trasferiti a un modello diagnostico. Limpronta dellimpianto fornir al laboratorio un modello di lavoro dellimpianto. Controindicazioni Il Transfer Impression non deve essere utilizzato come abutment temporaneo. Procedura Posizionare lappropriato Open-Tray Transfer Assembly sullimpianto e serrare con il Hex Driver 0,050". Verificare con una radiografia che labutment sia completamente
Impianto Impianto Steri-Oss Impianto Replace Hex Materiale Steri-Oss (mm) Replace Hex(mm) (mm) Non-Hex (mm) Steri-Oss(mm) Transfer Impression Components Open Tray Transfer Impression Components Open Tray Transfer Impression Components Open Tray Transfer Impression Components Open Tray Transfer Impression Components Open Tray 3,25 3,25 3,8/4,5 5,0 6,0 4,5 4,5 6,0 6,0 3,5 4,3 5,0 6,0 3,5 4,5 6,0 6,0 Ti-Alloy Ti-Alloy Ti-Alloy Ti-Alloy Ti-Alloy
Italiano
Prodotti supplementari: Hex Screwdriver 0,050"; Per i numeri di articolo, vedere il Catalogo prodotti alle pagine 14 e 18.
82
NobelEsthetics

I professionisti che utilizzano i sistemi Steri-Oss e Replace dovranno ricevere una formazione e un addestramento appropriati allo specifico livello di trattamento. Per ulteriori informazioni, contattare Nobel Biocare. Nota: se si utilizzano componenti o strumenti non originali (non realizzati da Nobel Biocare), non sar possibile effettuare reclami sulla sicurezza e lefficacia dei prodotti. Di conseguenza, la garanzia fornita da Nobel Biocare potrebbe essere invalidata.

Le cappette sono incorporate nella protesi definitiva mediante fusione durante la procedura o tramite saldatura.
Impianto Steri-Oss (mm)
Materiale
Conical Abutment Gold Coping Conical Abutment Gold Coping
3,25 3,8/4,5
Gold Alloy Gold Alloy
Si consiglia di effettuare la saldatura entro un intervallo non superiore a 800 C. Prodotti supplementari: Hex Screwdriver 0,050". Analog Conical Abutment Per i numeri di articolo, vedere il Catalogo prodotti alla pagina 18.
83
Italiano
1400 1490 C
12,4 m/m K a 600 C
Catalogo prodotti Replace External Hex
NobelEsthetics
Catalogo Prodotti
Numero articolo Componente Numero vecchio articolo
Healing Abutments
Prodotti supplementari 2085 Screwdriver Hex 0,050" Length 0,7" 2086 Screwdriver Hex 0,050" Length 1,25"

4,3 mm
5,0 mm Italiano
6,0 mm
Prodotti supplementari 31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace Hex 43714 Implant Analog 4,3 Replace Hex 43708 Polishing Cap Implant 4,3 Replace Hex 4/pkg 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
43702
84
NobelEsthetics
Numero articolo Componente
Numero vecchio articolo

4,3 mm
5,0 mm
Prodotti supplementari 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm 2129 Transmucosal Abutment Wrench 2476 Torque Wrench Insert Transmucosal Abutment
2128 2117
2122
85
Italiano
NobelEsthetics


4,3 mm
5,0 mm
31557 O-Ring Abutment 2 mmH, 5,0 mm Replace Hex 50600 Prodotti supplementari 2493 O-Ring Abutment Analog w/Spacer 2/pkg 2078 O-Ring Clinical White 12/pkg 2413 Retaining Ring 2/pkg

4,3 mm
5,0 mm Italiano
6,5 mm
31534 Transfer Assembly Hex Open Tray 6,0 mmD, 6,0 HL/Replace Hex 60701 Prodotti supplementari 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
86
NobelEsthetics
Catalogo prodotti Replace Select
Replace Select

4,3 mm
5,0 mm
Prodotti supplementari 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm
2128 2117
2122
87
Italiano
Catalogo prodotti Steri-Oss
NobelEsthetics
Steri-Oss

3,8 mm/4,5 mm
2213
5,0 mm
5013
6,0 mm
6100 Prodotti supplementari 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

3,8 mm/4,5 mm Italiano

5,0 mm
6,0 mm
Prodotti supplementari 31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace Hex 43714 Implant Analog 4,3 mm/Replace 43708 Polishing Cap Implant 4,3 Replace Hex 4/pkg 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
43702
88
NobelEsthetics
Steri-Oss

3,8 mm/4,5 mm
5,0 mm

3,8 mm/4,5 mm
Nota: Gli O-Ring e Retainer Ring devono essere acquistati separatamente.
Prodotti supplementari 2493 O-Ring Abutment Analog w/Spacer 2/pkg 2078 O-Ring Clinical White 12/pkg 2413 Retainer Rings 2/pkg
89
Italiano
Prodotti supplementari 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm 2129 Transmucosal Abutment Wrench 2476 Torque Wrench Insert Transmucosal Abutment
2128 2117
2122
NobelEsthetics
Steri-Oss
Conical Abutment
Prodotti supplementari 2688 Analog Conical Abutment 3,25/3,8/4,5 HL
Coronal Screw Sets

Prodotti supplementari 2085 Screwdriver Hex 0,050" Length 0,75" 2472 Torque Wrench Insert Hex 0,050" Short

3,8/4,5 mm
5,0 mm Italiano
31533 Transfer Assembly Hex Open Tray, 6,0 mmD, 5,0 mm HL/Replace Hex 5049
6,0 mm
31534 Transfer Assembly Hex Open Tray 6,0 mmD 6,0 HL/Replace Hex 60701 Prodotti supplementari 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
90
NobelEsthetics
Varie
Varie
Screwdrivers
Implant Analogs
Polishing Caps
2688 31705 2493
Analog Conical Abutment 3,25/3,8/4,5 HL PME Abutment Analog O-Ring Abutment Analog w Spacer 2/pkg
2128

Abutment Screws
62200
91
Italiano
Abutment Analogs
NobelEsthetics
94 95 96 97 98 99 100 101 102104 105 106108 109
93
NobelEsthetics
C&B&I A new way to think and act!
94
NobelEsthetics
95
NobelEsthetics
96
NobelEsthetics
97
NobelEsthetics
98
NobelEsthetics
99 9
NobelEsthetics
100
NobelEsthetics
101
NobelEsthetics
102 12
NobelEsthetics
103
NobelEsthetics
104
NobelEsthetics
105
NobelEsthetics
106
NobelEsthetics
107
NobelEsthetics
108 18
NobelEsthetics
109 19
Portugus
ndice
NobelEsthetics
ndice
Introduo
Peas suplentes para sistemas Steri-Oss, Replace e Replace Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Healing Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Direct Abutment, Engaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Direct Abutment, Non-Engaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 PME Transmucosal Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 O-Ring Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 Transfer Impression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Conical Abutment Gold Coping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Catlogo de Produtos
Replace External Hex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120122 Replace Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Steri-Oss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124126 Diversos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
111
Portugus
Introduo
NobelEsthetics
Introduo
Peas suplentes para sistemas Steri-Oss, Replace e Replace Select
A Nobel Biocare oferece-lhe agora mais opes do que nunca. Como os sistemas Steri-Oss e Replace podem ser substitudos por alternativas novas e melhoradas, vamos prolongar o nosso servio fornecendo-lhe as peas suplentes necessrias para manter as restauraes existentes.
Factos sobre os produtos

Muitas das peas suplentes foram ou sero sujeitas s mesmas alteraes da gama de produtos convencionais, incluindo novos rtulos e embalagens. Alguns nomes de produtos sofreram ligeiras alteraes para se harmonizarem com os produtos convencionais. Essas alteraes esto a ser introduzidas gradualmente. C&B&I Uma nova forma de pensar... e agir!
Definio
Peas suplentes so instrumentos e componentes protticos da gama de produtos Nobel Biocare essenciais para manter as restauraes existentes nos pacientes (exigncia clnica).
Nota: No se aceitam devolues de produtos.
Portugus
112
NobelEsthetics
Healing Abutment
Healing Abutment
Procedimento
A ligao do Healing Abutment ao implante faz-se com uma hexagon screwdriver de 0,050". Antes do aperto definitivo, verifique numa radiografia se o pilar est bem encaixado para confirmar a interface metal-a-metal.
Precaues
imperativo que todos os fragmentos de tecido e de osso sejam removidos da interface do implante antes do encaixe do Healing Abutment. Os profissionais que utilizam sistemas Steri-Oss e Replace devem receber formao e treino adequados para o seu nvel de tratamento especfico. Para obter mais informaes, contacte a Nobel Biocare.
Nota: Se forem utilizados componentes/instrumentos no originais (no da Nobel Biocare), nenhuma reclamao poder ser feita quanto sua segurana e eficcia. As garantias relativas a produtos Nobel Biocare podem ser consideradas nulas e invlidas.
Healing Abutment
Este dispositivo permite a formao de um sulco de tecido mole volta do implante.
Contra-indicaes
No deve ser utilizado para suportar uma restaurao provisria.
Recomendaes de Limpeza e Esterilizao

Os dispositivos so fornecidos esterilizados. Embalagens abertas de pilares que nunca tenham sido introduzidos na cavidade oral de um paciente podem ser limpos e autoclavados a vapor, de acordo com procedimentos adoptados no hospital ou clnica local.
Steri-Oss Implant (mm) Healing Abutment Healing Abutment Healing Abutment Healing Abutment 3,25 3,8/4,5 5,0 6,0
Altura
(mm)
3 3 3 3
Produtos suplementares: Hex Screwdriver de 0,050". Para saber os nmeros dos artigos, consulte as pginas 12,16 do Catlogo de Produtos.
113
Portugus
NobelEsthetics

Este dispositivo processado primeiro no laboratrio. Trata-se de um pilar definitivo intra-oral que se fixa ao implante numa restaurao aparafusada com um s parafuso. Tambm pode ser utilizado para fabricar um pilar personalizado para uma restaurao cimentvel. pilar est bem encaixado para confirmar a interface metal-a-metal.
Precaues
imperativo que todos os fragmentos de tecido e de osso sejam removidos da interface do implante antes do encaixe do Direct Abutment. Os profissionais que utilizam sistemas Steri-Oss e Replace devem receber formao e treino adequados para o seu nvel de tratamento especfico. Para obter mais informaes, contacte a Nobel Biocare.
Procedimento
Depois de processado no laboratrio, o Direct Abutment apertado com a hexagon screwdriver manual de 0,050". O pilar deve ficar integrado na interface hexagonal externa do implante. Antes do aperto a 35 Ncm, verifique numa radiografia se o
Ouro/Plstico Direct Abutment, Engaging inclui um TorqTite Screw Direct Abutment, Engaging inclui um TorqTite Screw Direct Abutment, Engaging inclui um TorqTite Screw Direct Abutment, Engaging inclui um TorqTite Screw Composio qumica Elemento Au Pt Pd Ir % por peso 60 19 20 1
Altura
(mm)
12 12 12 12
Intervalo de fuso 1400 1490 C
Coeficiente de expanso trmica 12,4 m/m K at 600 C
Fuso recomendada em ligas metlicas:
Ligas cermicas adesivas: Ligas com alto teor de ouro (mn 75% Au), standard ISO/DIS9693, NIOM tipo a. Ligas em ouro convencionais: Alto teor de ouro (mn 75% Au + Pt metal), standard ISO 1562 tipo 4.
Recomendada soldadura a 800 C. Plstico Direct Abutment Engaging Plstico inclui um TorqTite Screw Steri-Oss Implant (mm) 3,25 3,8/4,5 5,0 6,0 Replace Hex Implant (mm) 3,5 4,3 5,0 6,0 Altura
(mm)
Material Plstico Plstico Plstico Plstico
10 10 10 10
Portugus
Produtos suplementares: Open Tray Transfer Assembly, Implant Analog, 0,050", Hex Driver, Polishing Cap Para saber os nmeros dos artigos, consulte as pginas 12,16 do Catlogo de Produtos.
114
NobelEsthetics

a hexagon screwdriver manual de 0,050". Antes do aperto a 35 Ncm, verifique numa radiografia se todos os pilares esto bem encaixados para confirmar a interface metal-a-metal.
Precaues
imperativo que todos os fragmentos de tecido e de osso sejam removidos da interface do implante antes do encaixe do pilar. Os profissionais que utilizam sistemas Steri-Oss e Replace devem receber formao e treino adequados para o seu nvel de tratamento especfico. Para obter mais informaes, contacte a Nobel Biocare.

Este dispositivo processado primeiro no laboratrio. Trata-se de um pilar definitivo intra-oral que se fixa ao implante numa restaurao aparafusada, mltipla, ferulizada.
Procedimento
Depois de processada no laboratrio, a estrutura/ restaurao ferulizada colocada e apertada com
Steri-Oss Implant (mm) Direct Abutment, Non-Engaging inclui um TorqTite Screw Direct Abutment, Non-Engaging inclui um TorqTite Screw Direct Abutment, Non-Engaging inclui um TorqTite Screw Direct Abutment, Non-Engaging inclui um TorqTite Screw 5,0 6,0 3,25
Altura
(mm)
12 12 12 12
Composio qumica Elemento Au Pt Pd Ir % por peso 60 19 20 1
Intervalo de temperaturas de fuso 1400 1,490 C
Recomendada soldadura a 800 C. Produtos suplementares: Open Tray Transfer Assembly, Implant Analog, 0,050", Hex Driver, Polishing Cap Para saber os nmeros dos artigos, consulte as pginas 12,16 do Catlogo de Produtos.
115
Portugus
NobelEsthetics

Procedimento
Coloque o PME Transmucosal Abutment com a Transmucosal Abutment Wrench. Verifique numa radiografia se o pilar est bem encaixado para confirmar a interface metal-a-metal com o implante. Termine o aperto com a torque wrench a 35 Ncm e com o Transmucosal Abutment Insert. Fixe a restaurao nos PME Abutments com parafusos de coifa apertados com um torque de 35 Ncm.
Precaues

Este pilar utiliza-se numa prtese aparafusada, mltipla, para um implante com um perfil divergente inferior a 40.
Contra-indicaes
O PME Transmucosal Abutment suporta restauraes unitrias.

Os dispositivos so fornecidos esterilizados. Embalagens abertas de pilares que nunca tenham sido introduzidos na cavidade oral de um paciente podem ser limpos e autoclavados a vapor, de acordo com procedimentos adoptados no hospital ou clnica local para produtos semelhantes.
imperativo que todos os fragmentos de tecido e de osso sejam removidos da interface do implante antes do encaixe do PME Transmucosal Abutment. A chave de torque no pode ser utilizada para apertar a tampa de cicatrizao de titnio colocada sobre o pilar antes da provisionalizao. Os profissionais que utilizam sistemas Steri-Oss e Replace devem receber formao e treino adequados para o seu nvel de tratamento especfico. Para obter mais informaes, contacte a Nobel Biocare.
Steri-Oss Steri-Oss Replace Hex Replace Hex Implant (mm) Altura (mm) Implant (mm) Altura (mm) PME Transmucosal Abutment inclui healing cap PME Transmucosal Abutment inclui healing cap PME Transmucosal Abutment inclui healing cap 3,25 3,8/4,5 5,0 3,75, 5 3,4,5 3,25, 4,25, 5,25 3,5 4,3 5,0 3,5, 4,5, 5,5 3,25, 4,25, 5,25 3,25, 4,25, 5,25 Replace Seleccionar Altura (mm) 2,3,4,5 2,3,4,5 2,3,4,5
Material Ti-Alloy (abutment) Ti-Alloy coping screw Ti-Alloy (abutment) Ti-Alloy coping screw Ti-Alloy (abutment) Ti-Alloy coping screw Material Ti-Alloy (abutment) Ti-Alloy coping screw Ti-Alloy (abutment) Ti-Alloy coping screw Ti-Alloy (abutment) Ti-Alloy coping screw
Steri-Oss Steri-Oss Replace Non-Hex Non-Hex Seleccionar Implant (mm) Altura (mm) Implant (mm) PME Transmucosal Abutment inclui healing cap screw PME Transmucosal Abutment inclui healing cap screw PME Transmucosal Abutment inclui healing cap screw 3,25 3,8 3 2,3,4 3,5 4,3 5,0
Portugus
Produtos suplementares: Impression Coping Open Tray, PME Abutment Analog, PME Coping, Gold Plastic, Hexed Coping Transmucosal Screws, Slotted Coping Screws, PME Temporary Coping, Transmucosal Abutment Wrench, Torque Wrench Insert, Transmucosal Abutment. Para saber os nmeros dos artigos, consulte as pginas 13,15,17 do Catlogo de Produtos.
116
NobelEsthetics
O-Ring Abutment
O-Ring Abutment
Procedimento
Coloque o O-Ring Abutment. Verifique numa radiografia se o pilar est bem encaixado para confirmar a interface metal-a-metal. Aperte a 35 Ncm. Faa uma impresso directamente sobre o O-Ring Abutment e envie para um laboratrio. Alivie a dentadura sobre o pilar, se for necessrio. Coloque a dentadura e verifique a ocluso.
Precaues
O-Ring Abutment
Trata-se de um pilar definitivo, intra-oral, fixo ao implante, para sobredentaduras fixadas por implantes, suportadas por tecidos, normalmente com dois ou mais implantes paralelos (<10).
Contra-indicaes
O O-Ring Abutment suporta restauraes unitrias e/ou implantes de comprimento inferior a 13 mm.
imperativo que todos os fragmentos de tecido e de osso sejam removidos da interface do implante antes do encaixe do O-Ring Abutment. Os profissionais que utilizam sistemas Steri-Oss e Replace devem receber formao e treino adequados para o seu nvel de tratamento especfico. Para obter mais informaes, contacte a Nobel Biocare.

Os dispositivos so fornecidos esterilizados. Embalagens abertas de pilares que nunca tenham sido introduzidos na cavidade oral de um paciente podem ser limpos e autoclavados a vapor, de acordo com procedimentos adoptados no hospital ou clnica local para produtos semelhantes.
Steri-Oss Implant (mm) O-Ring Abutment O-Ring Abutment O-Ring Abutment *4 mm disponveis apenas para for 3,8 /4,5 Steri-Oss Non-Hex Implant (mm) O-Ring Abutment O-Ring Abutment 3,8 3,25 3,25 3,8/4,5
Altura
(mm)
Material Ti-Alloy (abutment) Ti-Alloy (abutment) Ti-Alloy (abutment)
2,5, 4 2,3,4* 2
Steri-Oss Non-Hex Altura (mm) 2 2
Produtos suplementares: O-Ring Abutment Analog e Spacer, White Clinical O-Rings, Retainer Rings Nota: Os pilares O-Ring e Retainer Ring tm de ser adquiridos separadamente. Para saber os nmeros dos artigos, consulte as pginas 14,17 do Catlogo de Produtos.
117
Portugus
Transfer Impression
NobelEsthetics
Transfer Impression
Verifique numa radiografia se o pilar est bem encaixado para confirmar a interface metal-a-metal. Registe uma impresso utilizando um tabuleiro com um corte em janela acima do conjunto. O parafuso prottico tem de sobressair atravs da abertura do tabuleiro de impresso e ficar claramente visvel. Depois de o material secar, solte e remova a impresso.
Precaues
imperativo que todos os fragmentos de tecido e de osso sejam removidos da interface do implante antes do encaixe da Transfer Impression. Os profissionais que utilizam sistemas Steri-Oss e Replace devem receber formao e treino adequados para o seu nvel de tratamento especfico. Para obter mais informaes, contacte a Nobel Biocare.
Transfer Impression
Este dispositivo utiliza-se quando a localizao e angulao da parte hexagonal ou interna do implante transferida para um modelo de diagnstico. A impresso do implante fornece ao laboratrio um modelo de trabalho do implante.
Contra-indicaes
A Transfer Impression no pode ser utilizada como pilar provisrio.
Procedimento
Coloque o Open-Tray Transfer Assembly apropriado sobre o implante e aperte com o hex driver de 0,050".
Steri-Oss Non-Hex Implant (mm) Transfer Impression Components Open Tray Transfer Impression Components Open Tray Transfer Impression Components Open Tray Transfer Impression Components Open Tray Transfer Impression Components Open Tray 3,25
Steri-Oss Steri-Oss Implant (mm) (mm) 3,25 3,8/4,5 5,0 6,0 4,5 4,5 6,0 6,0
Replace Hex Replace Hex Material Implant (mm) (mm) 3,5 4,3 5,0 6,0 3,5 4,5 6,0 6,0 Ti-Alloy Ti-Alloy Ti-Alloy Ti-Alloy Ti-Alloy
Produtos suplementares: Hex Screwdriver de 0,050". Para saber os nmeros dos artigos, consulte as pginas 14,18 do Catlogo de Produtos.
Portugus
118
NobelEsthetics

Os profissionais que utilizam sistemas Steri-Oss e Replace devem receber formao e treino adequados para o seu nvel de tratamento especfico. Para obter mais informaes, contacte a Nobel Biocare.

As coifas so incorporadas na restaurao prottica definitiva atravs de fuso ou soldadura.
Steri-Oss Implant (mm) Conical Abutment, Gold Coping Conical Abutment, Gold Coping 3,25 3,8/4,5
Composio qumica Elemento Au Pt Pd Ir % por peso 60 19 20 1
Intervalo de fuso 1400 1,490 C
Recomendada soldadura a 800 C. Produtos suplementares: Hex Screwdriver de 0,050", Analog Conical Abutment Para saber os nmeros dos artigos, consulte a pgina 18 do Catlogo de Produtos.
119
Portugus
Catlogo de produtos Replace External Hex
NobelEsthetics
Catlogo de Produtos
Nmero do artigo Componente Nmero do artigo antigo
Healing Abutments
Produtos suplementares 2085 Screwdriver Hex 0,050" Length 0,7" 2086 Screwdriver Hex 0,050" Length 1,25"

4,3 mm
5,0 mm
6,0 mm
Produtos suplementares 31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace Hex 43714 Implant Analog 4,3 Replace Hex 43708 Polishing Cap Implant 4,3 Replace Hex 4/pkg 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
43702
Portugus
120
NobelEsthetics
Nmero do artigo
Componente
Nmero do artigo antigo

4,3 mm
5,0 mm
Produtos suplementares 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm 2129 Transmucosal Abutment Wrench 2476 Torque Wrench Insert Transmucosal Abutment
2128 2117
2122
121
Portugus
NobelEsthetics


4,3 mm
5,0 mm
31557 O-Ring Abutment 2 mmH, 5,0 mm Replace Hex 50600 Produtos suplementares 2493 O-Ring Abutment Analog w/Spacer 2/pkg 2078 O-Ring Clinical White 12/pkg 2413 Retaining Ring 2/pkg

4,3 mm
5,0 mm
6,5 mm
31534 Transfer Assembly Hex Open Tray 6,0 mmD, 6,0 HL/Replace Hex 60701 Produtos suplementares 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
Portugus
122
NobelEsthetics
Catlogo de produtos Replace Select
Replace Select

4,3 mm
5,0 mm
Produtos suplementares 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm
2128 2117
2122
123
Portugus
Catlogo de produtos Steri-Oss
NobelEsthetics
Steri-Oss

3,8 mm/4,5 mm
2213
5,0 mm
5013
6,0 mm
6100 Produtos suplementares 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

3,8 mm/4,5 mm
5,0 mm
6,0 mm
Portugus
Produtos suplementares 31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace Hex 43714 Implant Analog 4,3 mm/Replace 43708 Polishing Cap Implant 4,3 Replace Hex 4/pkg 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
43702
124
NobelEsthetics
Steri-Oss

3,8 mm/4,5 mm
5,0 mm
Produtos suplementares 31705 PME Abutment Analog 2149 PME Coping, Gold/Plastic 31708 PME Impression Coping Open Tray 2496 PME Temporary Coping 2346 Coping Screw Hex 2 mm 4/pkg 31704 Coping Screw Slot 16 mm 2129 Transmucosal Abutment Wrench 2476 Torque Wrench Insert Transmucosal Abutment
2128 2117
2122

3,8 mm/4,5 mm
Nota: Os pilares O-Ring e Retainer Ring tm de ser adquiridos separadamente.
125
Portugus
Produtos suplementares 2493 O-Ring Abutment Analog w/Spacer 2/pkg 2078 O-Ring Clinical White 12/pkg 2413 Retainer Rings 2/pkg
NobelEsthetics
Steri-Oss
Conical Abutment
Produtos suplementares 2688 Analog Conical Abutment 3,25/3,8/4,5 HL
Coronal Screw Sets

Produtos suplementares 2085 Screwdriver Hex 0,050" Length 0,75" 2472 Torque Wrench Insert Hex 0,050" Short

3,8/4,5 mm
5,0 mm
6,0 mm
31534 Transfer Assembly Hex Open Tray 6,0 mmD 6,0 HL/Replace Hex 60701 Produtos suplementares 2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"
Portugus
126
NobelEsthetics
Diversos
Diversos
Screwdrivers
Implant Analogs
Polishing Caps
Abutment Analogs

Abutment Screws
62200
127
Portugus
v 12:3
Customer Service worldwide.

NORTH AMERICA
CANADA Nobel Biocare Canada Phone: +1 905 762 3500 Cust. support: +1 800 939 9394 USA Nobel Biocare USA Phone: +1 714 282 4800 Cust. support: +1 800 322 5001
EUROPE AND RUSSIA

AUSTRIA Nobel Biocare Austria Phone: +43 1 892 89 90 BELGIUM Nobel Biocare Belgium Phone: +32 2 467 41 70 DENMARK Nobel Biocare Denmark Phone: +45 39 40 48 46 FINLAND Nobel Biocare Finland Phone: +358 9 343 69 70 FRANCE Nobel Biocare France Phone: +33 1 49 20 00 30 GERMANY Nobel Biocare Germany Phone: +49 221 500 85 590 HUNGARY Nobel Biocare Hungary Phone: +36 1 279 33 79
IRELAND Nobel Biocare Ireland Phone: toll free 1800 677 306 ITALY Nobel Biocare Italy Phone: +39 039 683 61 Cust. support: toll free 800 53 93 28 LITHUANIA Nobel Biocare Lithuania Phone: +370 5 268 3448 NETHERLANDS Nobel Biocare Netherlands Phone: +31 30 635 4949 NORWAY Nobel Biocare Norway Phone: +47 64 95 75 55 POLAND Nobel Biocare Poland Phone: +48 22 549 93 50 Cust. support: +48 22 549 93 52
PORTUGAL Nobel Biocare Portugal Phone: +351 22 374 73 50 Cust. support: toll free 800 300 100 RUSSIA Nobel Biocare Russia Phone: +7 495 974 77 55 Cust. support: toll free 8 800 250 77 55 SPAIN Nobel Biocare Spain Phone: +34 93 508 8800 Cust. support: toll free 900 850 008 SWEDEN Nobel Biocare Sweden Phone: +46 31 335 49 00 Cust. support: +46 31 335 49 10 SWITZERLAND Nobel Biocare Switzerland Phone: +41 43 211 53 20 UNITED KINGDOM Nobel Biocare UK Phone: +44 208 756 3300
ASIA PACIFIC
AUSTRALIA Nobel Biocare Australia Phone: +61 2 8064 5100 Cust. support: toll free 1800 804 597 CHINA Nobel Biocare China Phone: +86 21 5206 6655 Cust. support: +86 21 5206 0974 HONG KONG Nobel Biocare Hong Kong Phone: +852 2845 1266 Cust. support: +852 2823 8926 INDIA Nobel Biocare India Phone: +91 22 6751 9999 Cust. support: toll free 1 800 22 9998
CENTRAL/SOUTH AMERICA DISTRIBUTOR MARKETS

CHILE ECM Ingeniera S.A. Phone: +56 2 655 5500 Cust. support: +56 2 655 5502 COLOMBIA Hospimedics S.A. Phone: +57 1 620 9410 Cust. support: +57 1 620 9410 BRAZIL Nobel Biocare Brazil Phone: +55 11 5102 7000 Cust. support: 0800 169 996 MEXICO Nobel Biocare Mexico Phone: +52 55 524 974 60
AFRICA
SOUTH AFRICA Nobel Biocare South Africa Phone: +27 11 802 0112
EUROPE AND MIDDLE EAST DISTRIBUTOR MARKETS

BAHRAIN, BULGARIA, CROATIA, CYPRUS, CZECH REPUBLIC, GREECE, IRAN, IRAQ, ISRAEL, JORDAN, KUWAIT, LEBANON, MALTA, OMAN, ROMANIA, SAUDI ARABIA, SERBIA, SLOVAKIA, SLOVENIA, TURKEY, UNITED ARAB EMIRATES, QATAR Phone: +48 22 549 93 56 Cust. support: +48 22 549 93 55
JAPAN Nobel Biocare Japan Phone: +81 3 6717 6191 NEW ZEALAND Nobel Biocare New Zealand Phone: +61 2 8064 5100 Cust. support: toll free 0800 441 657 SINGAPORE Nobel Biocare Singapore Phone: +65 6737 7967 Cust. support: +65 6737 7967 TAIWAN Nobel Biocare Taiwan Phone: +886 2 2793 9933
www.nobelbiocare.com
15854 H ML 1211 Printed in Sweden. Nobel Biocare Services AG, 2010. All rights reserved. Nobel Biocare, the Nobel Biocare logotype and all other trademarks are, if nothing else is stated or is evident from the context in a certain case, trademarks of Nobel Biocare. Product images are not necessarily to scale.

Dental Implants Parts

Uploaded by

Copyright:

Available Formats

Dental Implants Parts

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dental Implants Parts

Uploaded by

Copyright:

Available Formats

procedures & products

Spare Parts for:

Replace Hex Implant (mm) 3.5 4,3 5.0 6.0

Material Ti-Alloy Ti-Alloy Ti-Alloy Ti-Alloy

Direct Abutment, Hexed

Direct Abutment, Engaging

Steri-Oss Implant (mm) 3.25 3.8/4.5 5.0 6.0

Replace Hex Implant (mm) 3.5 4.3 5.0 6.0

Melting Range 1400 1490 C

Coeff of Thermal Expansion 12.4 m/m K at 600 C

Recommended casting on alloys:

Material Plastic Plastic Plastic Plastic

Direct Abutment, Non-Hexed

Direct Abutment, Non-Engaging

Direct Abutment, Non-Engaging

Replace Hex Implant (mm) 3,5 4,3 5,0 6,0

Chemical Composition Element Au Pt Pd Ir % by weight 60 19 20 1

Melting Range 1400 490 C

Coeff of Thermal Expansion 12.4 m/m K at 600 C

Recommended casting on alloys:

PME Transmucosal Abutment

PME Transmucosal Abutment

PME Transmucosal Abutment

Replace Hex Implant (mm) 3.5 4.3 5.0

Material Ti-Alloy (abutment) Ti-Alloy (abutment) Ti-Alloy (abutment)

Steri-Oss Non-Hex Height (mm) 2 2

Material Ti-Alloy Ti-Alloy

Conical Abutment Gold Coping

Conical Abutment Gold Coping

Conical Abutment Gold Coping

Material Gold Alloy Gold Alloy

Chemical Composition Element Au Pt Pd Ir % by weight 60 19 20 1

Melting Range 1400 1490 C

Coeff of Thermal Expansion 12.4 m/m K at 600 C

Recommended casting on alloys:

Product Catalog Replace External Hex

Direct Abutment 3.5 mm

Product Catalog Replace External Hex

Replace External Hex

Old Article Number

PME Transmucosal Abutment 3.5 mm

Product Catalog Replace External Hex

Replace External Hex

O-Ring Abutment 3.5 mm

Transfer Impression Components 3.5 mm

Product Catalog Replace Select

PME Transmucosal Abutment 3.5 mm

Product Catalog Steri-Oss

Healing Abutments 3.25 mm

Direct Abutment 3.25 mm

Product Catalog Steri-Oss

PME Transmucosal Abutment (PME Abutments Include Healing Cap) 3.25 mm

O-Ring Abutment 3.25 mm

Note: O-Rings and Retainer Rings must be purchased separately.

Product Catalog Steri-Oss

Supplementary Products 2688 Analog Conical Abutment 3.25/3.8/4.5 HL

Coronal Screw Sets

Transfer Impression Components 3.25 mm

Surgical and Prosthetic Accessories

Healing Abutment (Gingivaformer)