OILFIELD PRODUCTS GROUP

GENERAL CATALOG

LEADER IN THE FIELD

CONTENTS
2 Introduction
3 Conventional Crank
Balanced Pumping Units

11 Mark II Unitorque
Pumping Units

19 Air Balanced Pumping Units

25 Reverse Mark Pumping Units
31 Churchill Beam Balanced
Pumping Units

35 Special Application
Pumping Units

41 Gear Reducer and

Lubrication Data

45 Optional Equipment
and Special Features

51 Oilfield Service Centers

53 Field Automation and
Well Optimization

57 Artificial Lift and Oilfield

Automation Training

59 Artificial Lift Nomenclature

and Application Formulas

63 Ordering Instructions/Warranties
64 Sales and Service Locations

From the sandy deserts of Saudi Arabia to the icy frontier of Alaskas
North Slope, the name Lufkin stands as mute testimony to one companys
dedication to quality.
It all started from a small foundry and machine shop in the piney woods
of East Texas that grew to become the worlds foremost manufacturer of
sucker rod pumping units. When the company was founded in 1902, it
was known as Lufkin Foundry and Machine Company. By 1970 its diverse
product line had long outgrown that name, and it was changed to Lufkin
Industries, Inc.
Today, Lufkin Industries designs, manufactures and markets products
and services to global energy, industrial and transportation markets
through four divisions:
Oilfield Products Group. In addition to being the
worlds leading manufacturer and supplier of sucker
rod pumping units, Lufkin Oilfield Services refurbishes
and sells used pumping units and provides installation, field service, machine shop repair and new OEM
parts for its customers. All brands Lufkin, Churchill,
American, LeGrand, Bethlehem, National, etc. are
supported. Additionally, Lufkin Automation is the industry leader in oil production
automation and well optimization products and services (pump-off controllers,
dynamometers, fluid level equipment, well analysis, design/analysis software, well
design consulting and training). With the acquisition of Delta-X and Nabla and with
thousands of controllers in service, Lufkin Automation continues the Lufkin tradition
of helping producers lower their production costs and optimize well efficiency.
Trailer Division. The companys Trailer Division designs
and manufactures van, flatbed, float, drop frame, dump,
doubles, conventional, spread axle and specialty trailers
for the trucking segment of the transportation industry. An
extensive network of branch offices ensures customers
rapid access to parts and repair services.
Power Transmission. This divisions high speed
products include turbo gears for power generation,
process compressors, oil and gas transmission and a
wide array of pumping applications. The low speed
product family includes custom and standard drives
for such industries as steel and aluminum mills, rubber
mills, plastics mixing and extrusion, sugar mills, marine
propulsion, cement mills and mining. Like the Oilfield Products Group, the Power
Transmission division provides cradle to grave service for its customers. From its
unique gear manufacturing and machining operations, Lufkin repairs virtually any
manufacturers gears and provides 24-hour emergency service to ensure minimum
downtime in a customers operations.
Foundry Division. Lufkins Foundry Division designs
and manufactures medium to large, low to medium
volume ductile and gray iron castings. On a daily basis,
this division serves OEMs in various industries, including
valves, machine tools, pump and compressors, as well
as construction equipment and special machinery.

CONVENTIONAL CRANK
BALANCED PUMPING UNITS

The Lufkin Conventional Crank Balanced Pumping Unit, widely known

and accepted, is the old reliable Work Horse of the oil patch. This is
the most universally adaptable unit in the Lufkin line. These units are
simple to operate and require minimum maintenance.

OILFIELD PRODUCTS GROUP

Dimensional Data
Unit Size*
C-1824D-365-192
C-1280D-365-192
C-912D-365-192
C-912D-305-192
C-912D-365-168
C-912D-305-168
C-912D-427-144
C-912D-365-144
C-640D-365-168
C-640D-305-168
C-640D-365-144
C-640D-305-144
C-640D-256-144
C-640D-365-120
C-640D-305-120
C-456D-305-168
C-456D-305-144
C-456D-265-144
C-456D-365-120
C-456D-305-120
C-456D-256-120
C-456D-213-120
C-456D-256-100
C-320D-256-144
C-320D-256-120
C-320D-213-120
C-320D-305-100
C-320D-256-100
C-320D-246-86
C-320D-213-86
C-320D-246-74

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

CONVENTIONAL CRANK
BALANCED PUMPING UNITS

(inches)

N1

AA

AB

120.00
120.00
120.00
120.00
120.00
120.00
120.00
120.00
120.00
120.00
120.00
120.00
120.00
120.00
111.00
120.00
120.00
120.00
120.00
111.00
111.00
111.00
111.00
120.00
111.00
111.00
111.00
111.00
111.00
96.00
96.00

210.00
210.00
210.00
210.00
210.00
210.00
180.00
180.00
210.00
210.00
180.00
180.00
180.00
152.00
155.00
210.00
180.00
180.00
152.00
155.00
155.00
155.00
129.00
180.00
155.00
155.00
129.00
129.00
111.00
111.00
96.00

286.00
286.00
286.00
286.00
262.00
262.00
262.00
262.00
262.00
262.00
262.00
260.00
260.00
260.00
234.00
262.00
260.00
260.00
260.00
234.00
232.00
232.00
232.00
260.00
232.00
232.00
232.00
232.00
232.00
196.13
196.13

263.50
263.50
247.50
247.50
224.50
224.50
224.50
224.50
221.00
221.00
221.00
220.75
220.75
220.75
208.63
221.00
220.75
220.75
220.75
208.63
208.63
208.63
208.63
215.25
203.13
203.13
203.13
203.13
203.13
183.50
183.50

396.50
396.50
380.50
380.50
357.50
357.50
357.50
357.50
354.00
354.00
354.00
353.75
353.75
353.75
326.63
354.00
353.75
353.75
353.75
326.63
326.63
326.63
326.63
353.75
327.13
327.13
327.13
327.13
327.13
290.50
290.50

464.00
464.00
464.00
464.00
421.50
421.50
400.00
400.00
421.50
421.50
400.00
398.00
398.00
379.00
351.00
421.50
398.00
398.00
379.00
351.00
349.00
349.00
330.50
398.00
349.00
349.00
330.50
330.50
317.50
282.00
271.00

18.81
18.81
18.81
18.81
20.50
20.50
32.75
32.75
20.50
20.50
32.75
32.75
32.75
54.50
25.00
20.50
32.75
32.75
54.50
25.00
25.00
25.00
45.75
32.75
25.00
25.00
45.75
45.75
59.75
23.75
35.50

110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
95.00
110.00
110.00
110.00
110.00
95.00
95.00
95.00
95.00
110.00
95.00
95.00
95.00
95.00
95.00
78.00
78.00

63.88
63.88
63.63
63.63
62.25
62.00
74.25
74.25
62.25
62.25
74.25
72.50
72.50
75.50
78.25
62.25
72.50
72.50
75.50
78.25
76.00
76.00
75.75
72.50
76.00
76.00
76.00
76.00
75.75
75.00
77.75

80.25
80.25
80.25
80.25
76.00
76.00
76.00
76.00
76.00
76.00
76.00
76.00
76.00
76.00
70.00
76.00
76.00
76.00
76.00
70.00
70.00
70.00
70.00
76.00
70.00
70.00
70.00
70.00
70.00
57.75
57.75

24.50
24.50
24.13
24.13
24.13
24.13
24.13
24.13
24.13
21.13
21.13
21.13
21.00
24.13
21.13
21.13
21.13
21.00
21.00
21.00
21.00
21.13
21.00
21.00
21.00
21.00
21.00
16.13
16.13

24.50
24.50
21.00
21.00
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
15.88
15.88
15.88
15.88
15.88
15.88
15.88

143.00
143.00
143.56
143.56
166.50
166.50
136.50
136.50
166.50
166.50
136.50
136.88
136.88
108.88
114.88
166.50
136.88
136.88
108.88
114.88
114.88
114.88
88.88
136.88
114.88
114.88
88.88
88.88
70.88
75.50
60.50

58.88
52.50
48.50
48.50
48.50
48.50
48.50
48.50
41.50
41.50
41.50
41.50
41.50
41.50
41.50
38.38
38.38
38.38
38.38
38.38
38.38
38.38
38.38
34.00
34.00
34.00
34.00
34.00
34.00
34.00
34.00

92.38
98.75
87.50
87.50
87.50
87.50
87.50
87.50
91.00
91.00
91.00
91.13
91.13
91.13
76.00
94.13
94.25
94.25
94.25
79.13
79.13
79.13
79.13
98.63
83.50
83.50
83.50
83.50
83.50
66.50
66.50

52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
53.00
53.00
53.00
53.00
53.00
53.00
53.00

50.00
50.00
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
43.00
43.00
43.00
43.00
43.00
43.00
43.00
43.00

120.00
106.00
98.50
98.50
98.50
98.50
98.50
98.50
98.50
98.50
98.50
98.50
98.50
98.50
97.00
98.50
98.50
98.50
98.50
97.00
97.00
97.00
97.00
87.50
85.50
85.50
85.50
85.50
85.50
85.50
85.50

51.69
51.69
51.69
51.69
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.13
51.75
51.75
51.75
51.75
51.13
51.13
51.13
51.13
53.625
54.00
54.00
54.00
54.00
54.00
37.13
37.13

90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
75.88
90.88
90.88
90.88
90.88
75.88
75.88
75.88
75.88
93.00
79.00
79.00
79.00
79.00
79.00
62.13
62.13

UU V V
24.13
30.50
19.25
19.25
19.25
19.25
19.25
19.25
23.00
23.00
23.00
23.00
23.00
23.00
26.75
26.13
26.13
26.13
26.13
29.88
29.88
29.88
29.88
31.00
31.00
31.00
31.00
31.00
31.00
30.88
30.88

57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
37.75
57.00
57.00
57.00
57.00
37.75
37.75
37.75
37.75
48.25
33.25
33.25
33.25
33.25
33.25
33.25
33.25

* Conventional Crank Balanced Units are available in either two-point foundation or standard base foundation designs. Two-point units are suitable for front and rear concrete block foundations,
standard units must have a one-piece block foundation supporting the entire steel base. Dimension N is for two-point foundations and dimension N1 is for standard foundations.
NOTE: Do not use the above dimensions for foundation. Request a foundation plan. Standard API models shown, other models available on request.

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

CONVENTIONAL CRANK
BALANCED PUMPING UNITS

OILFIELD PRODUCTS GROUP

Dimensional Data (inches)

Unit Size*

C-228D-213-120
C-228D-213-100
C-228D-173-100
C-228D-246-86
C-228D-213-86
C-228D-200-74
C-228D-173-74
C-160D-173-100
C-160D-173-86
C-160D-200-74
C-160D-173-74
C-160D-143-74
C-160D-173-64
C-160D-143-64
C-114D-119-86
C-114D-143-74
C-114D-173-64
C-114D-143-64
C-114D-173-54
C-114D-133-54
C-80D-119-64
C-80D-133-54
C-80D-119-54
C-80D-133-48
C-80D-109-48
C-57D-76-54
C-57D-109-48
C-57D-95-48
C-57D-89-42
C-57D-76-42
C-40D-76-48
C-40D-89-42
C-40D-76-42
C-40D-89-36
C-25D-67-36
C-25D-56-36
C-25D-67-30
C-25D-53-30

111.00
96.00
96.00
111.00
96.00
96.00
84.00
96.00
96.00
96.00
84.00
84.00
84.00
72.00
84.00
84.00
84.00
72.00
72.00
64.00
64.00
64.00
64.00
64.00
56.00
56.00
56.00
56.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
36.00
36.00

155.00
129.00
129.00
111.00
111.00
96.00
96.00
129.00
111.00
96.00
96.00
96.00
84.00
84.00
111.00
96.00
84.00
84.00
72.00
72.00
84.00
72.00
72.00
64.00
64.00
72.00
64.00
64.00
56.00
56.00
64.00
56.00
56.00
48.00
48.00
48.00
45.00
45.00

232.00
196.13
196.13
232.00
196.13
196.13
168.25
195.13
195.13
195.13
168.25
166.00
166.00
146.50
166.00
166.00
166.00
146.50
146.50
116.00
116.00
116.00
116.00
116.00
105.00
105.00
105.00
105.00
98.50
98.50
98.50
98.50
98.50
98.50
98.50
98.50
84.50
84.50

196.13
176.50
176.50
196.13
176.50
176.50
160.00
172.00
172.00
172.00
155.50
155.50
155.50
133.75
150.00
150.00
150.00
128.25
128.25
119.88
119.88
119.88
119.88
119.88
111.88
111.88
111.88
111.88
98.00
98.00
93.00
93.00
93.00
93.00
88.00
88.00
75.00
75.00

326.63
290.00
290.00
326.63
290.00
290.00
273.50
288.00
288.00
288.00
260.50
260.50
260.50
227.75
266.00
266.00
266.00
226.25
226.25
213.88
213.88
213.88
213.88
213.88
200.38
200.38
200.38
200.38
186.50
186.50
180.00
180.00
180.00
180.00
180.00
180.00
167.00
167.00

349.00
295.00
295.00
317.50
282.00
271.00
243.00
295.00
282.00
273.00
243.00
241.00
232.50
210.00
252.00
241.00
232.50
210.00
201.00
183.00
191.50
183.00
183.00
177.00
166.25
172.00
166.25
166.25
152.00
152.00
158.00
152.00
152.00
146.00
145.75
145.75
129.00
129.00

25.13
21.75
21.75
59.75
23.75
35.63
16.75
21.50
23.75
35.25
16.75
16.75
26.00
18.00
14.75
16.75
26.13
18.13
19.38
13.50
13.25
13.50
13.50
14.63
14.63
13.63
16.00
16.00
16.38
16.38
14.63
16.38
16.38
12.75
13.00
13.00
15.50
15.50

95.00
78.00
78.00
95.00
78.00
78.00
68.00
78.00
78.00
78.00
68.00
68.00
68.00
56.00
68.00
68.00
68.00
56.00
56.00
50.00
50.00
50.00
50.00
50.00
46.00
46.00
46.00
46.00
44.00
44.00
44.00
44.00
44.00
44.00
44.00
44.00
36.00
36.00

76.00
63.00
63.00
75.75
75.00
77.25
68.75
62.75
74.88
77.25
68.75
66.00
67.00
53.75
54.50
66.50
67.00
53.75
62.25
49.88
40.38
49.88
49.88
54.88
44.00
38.88
42.75
42.75
42.00
42.00
35.63
42.00
42.00
51.13
50.88
50.88
36.63
36.63

70.00
59.75
59.75
70.00
59.75
59.75
51.75
57.75
57.75
57.75
51.75
51.75
51.75
50.75
51.75
51.75
51.75
50.75
50.75
47.00
47.00
47.00
47.00
47.00
40.75
40.75
40.75
40.75
38.50
38.50
38.50
38.50
38.50
38.50
38.50
38.50
31.00
31.00

21.00
16.13
16.13
21.00
16.13
16.13
15.88
15.88
15.88
15.88
15.88
15.88
15.88
12.25
15.88
15.88
15.88
12.25
12.25

N1

15.88 114.88
15.88 93.50
15.88 93.50
15.88 70.88
15.88 75.50
15.88 60.50
12.25 65.00
15.88 93.50
15.88 75.50
15.88 60.50
15.88 65.00
15.88 65.00
15.88 53.00
12.25 62.75
12.25 80.00
12.25 65.00
12.25 53.00
12.25 62.75
12.25 50.75
10.13 51.13
10.13 63.13
10.13 51.13
10.13 51.13
10.13 43.13
10.13 43.13
10.13 51.13
10.13 43.13
10.13 43.13
8.13 41.00
8.13 41.00
8.13 49.00
8.13 41.00
8.13 41.00
8.13 33.00
8.13 33.00
8.13 33.00
6.00 31.00
6.00 31.00

AA

AB

UU

VV

30.00
30.00
30.00
30.00
30.00
30.00
30.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
20.00
20.00
20.00
20.00
20.00
17.50
17.50
17.50
17.50
13.56
13.56
13.56
13.56

87.00
70.00
70.00
87.00
70.00
70.00
70.00
74.50
74.50
74.50
63.50
63.50
63.50
52.50
71.00
71.00
71.00
53.00
53.00
49.00
49.00
49.00
49.00
49.00
45.50
47.50
47.50
47.50
47.50
47.50
47.00
47.00
47.00
47.00
50.50
50.50
50.50
50.50

53.00
53.00
53.00
53.00
53.00
53.00
53.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
46.75
46.75
46.75
46.75
47.88
47.88
47.88
47.88

37.00
37.00
37.00
37.00
37.00
37.00
37.00
32.00
32.00
32.00
32.00
32.00
32.00
32.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
20.00
20.00
20.00
20.00
17.00
17.00
17.00
17.00

78.50
78.50
78.50
78.50
78.50
78.50
78.50
70.50
70.50
70.50
70.50
70.50
69.75
69.75
66.75
66.75
66.75
66.75
66.75
67.25
67.25
67.25
67.25
67.25
65.25
58.25
58.25
58.25
58.00
58.00
51.00
51.25
51.25
51.25
47.00
47.00
47.00
47.00

54.00
37.13
37.13
54.00
37.13
37.13
27.25
37.13
37.13
37.13
23.63
23.63
23.63
28.75
27.50
27.50
27.50
28.75
28.75
22.63
22.63
22.63
22.63
22.63
18.63
18.63
18.63
18.63
16.63
16.63
10.75
10.75
10.75
10.75
10.75
10.75
10.75
10.75

79.00
62.13
62.13
79.00
62.13
62.13
52.25
62.88
62.88
62.88
53.25
53.25
53.25
41.25
53.25
53.25
53.25
41.25
41.25
35.13
35.13
35.13
35.13
35.13
31.13
31.13
31.13
31.13
29.13
29.13
35.88
35.88
35.88
35.88
35.88
35.88
27.75
27.75

28.00
27.88
27.88
28.00
27.88
27.88
27.88
26.63
26.63
26.63
26.63
26.63
26.63
17.13
23.13
23.13
23.13
13.63
13.63
13.50
13.50
13.50
13.50
13.50
13.50
17.50
17.50
17.50
17.50
17.50
17.00
17.00
17.00
17.00
15.50
15.50
15.50
15.50

33.25
33.25
33.25
33.25
33.25
33.25
33.25
34.75
34.75
34.75
34.75
34.75
34.75
30.25
34.75
34.75
34.75
30.25
30.25
30.25
30.25
30.25
30.25
30.25
30.25
30.25
30.25
30.25
30.25
30.25
21.25
21.25
21.25
21.25
21.25
21.25
21.25
21.25

* Conventional Crank Balanced Units are available in either two-point foundation or standard base foundation designs. Two-point units are suitable for front and rear concrete block foundations,
standard units must have a one-piece block foundation supporting the entire steel base. Dimension N is for two-point foundations and dimension N1 is for standard foundations.
NOTE: Do not use the above dimensions for foundation. Request a foundation plan. Standard API models shown, other models available on request.

Two-Point Foundation

Standard Foundation

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

CONVENTIONAL CRANK
BALANCED PUMPING UNITS

OILFIELD PRODUCTS GROUP

The first enclosed, geared pumping

unit was built by Lufkin for Humble
Oil. It was installed on a well in the
Goose Creek, Texas field in 1923.

C
P
H
R
G

API Geometry Dimensions

Unit Size

C-1824D-365-192
C-1280D-365-192
C-912D-365-192
C-912D-305-192
C-912D-365-168
C-912D-305-168
C-640D-365-168
C-640D-305-168
C-456D-305-168
C-912D-427-144
C-912D-365-144
C-640D-365-144
C-640D-305-144
C-456D-305-144
C-640D-256-144
C-456D-256-144
C-320D-256-144
C-640D-365-120
C-456D-365-120
C-640D-305-120
C-456D-305-120
C-456D-256-120
C-320D-256-120
C-456D-213-120
C-320D-213-120
C-228D-213-120
C-456D-256-100
C-320D-256-100
C-320D-305-100
C-228D-213-100
C-228D-173-100
C-160D-173-100
C-320D-246-86
C-228D-246-86
C-320D-213-86
C-228D-213-86
C-160D-173-86
C-114D-119-86
C-320D-246-74
C-228D-200-74
C-160D-200-74
C-228D-173-74
C-160D-173-74
C-160D-143-74
C-114D-143-74

(inches)

R1, R2, R3, R4

S.U.

210
210
210
210
210
210
210
210
210
180
180
180
180
180
180
180
180
152
152
155
155
155
155
155
155
155
129
129
129
129
129
129
111
111
111
111
111
111
96
96
96
96
96
96
96

120.03
120.03
120.03
120.03
120.03
120.03
120.03
120.03
120.03
120.03
120.03
120.03
120.08
120.08
120.08
120.08
120.08
120.03
120.03
111.09
111.09
111.07
111.07
111.07
111.07
111.07
111.07
111.07
111.07
96.08
96.05
96.05
111.04
111.04
96.05
96.05
96.05
84.05
96.05
96.05
96.05
84.05
84.05
84.05
84.05

120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
111
111
111
111
111
111
111
111
111
111
96
96
96
111
111
96
96
96
84
96
96
96
84
84
84
84

172.50
172.50
172.50
172.50
148.50
148.50
148.50
148.50
148.50
148.50
148.50
148.50
144.50
144.50
144.50
144.50
144.50
148.50
148.50
133.50
133.50
132.00
132.00
132.00
132.00
132.00
132.00
132.00
132.00
113.00
114.00
114.00
133.00
133.00
114.00
114.00
114.00
93.75
114.00
114.00
114.00
96.00
96.00
93.75
93.75

286.00
286.00
286.00
286.00
262.00
262.00
262.00
262.00
262.00
262.00
262.00
262.00
260.00
260.00
260.00
260.00
260.00
262.00
262.00
234.00
234.00
232.00
232.00
232.00
232.00
232.00
232.00
232.00
232.00
196.13
196.13
195.88
232.00
232.00
196.13
196.13
195.88
166.00
196.13
196.13
195.88
168.25
168.25
166.00
166.00

111.00
111.00
111.00
111.00
111.00
111.00
111.00
111.00
111.00
111.00
111.00
111.00
111.00
111.00
111.00
111.00
111.00
109.00
109.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
79.13
79.13
78.88
96.00
96.00
79.13
79.13
78.88
69.25
79.13
79.13
78.88
69.25
69.25
69.25
69.25

53, 46, 39, 32

53, 46, 39, 32
53, 46, 39, 32
53, 46, 39, 32
47, 41, 35
47, 41, 35
47, 41, 35
47, 41, 35
47, 41, 35
47, 41, 35
47, 41, 35
47, 41, 35
47, 41, 35
47, 41, 35
47, 41, 35
47, 41, 35
47, 41, 35
47, 41, 35
47, 41, 35
42, 36, 30
42, 36, 30
42, 36, 30
42, 36, 30
42, 36, 30
42, 36, 30
42, 36, 30
42, 36, 30
42, 36, 30
42, 36, 30
37, 32, 27
37, 32, 27
37, 32, 27
42, 36, 30
42, 36, 30
37, 32, 27
37, 32, 27
37, 32, 27
32, 27, 22
37, 32, 27
37, 32, 27
37, 32, 27
32, 27, 22
32, 27, 22
32, 27, 22
32, 27, 22

-1985
-1800
-1800
-1800
-1500
-1500
-1500
-1500
-1500
-650
-650
-650
-520
-520
-400
-400
-400
570
570
-120
-120
55
55
0
0
0
550
550
550
0
0
0
800
800
450
450
450
115
800
800
800
450
450
300
300

T.F. @ 90/Stroke Length

90.51/192
90.51/192
90.51/192
90.51/192
80.32/168
80.32/168
80.32/168
80.32/168
80.32/168
68.82/144
68.82/144
68.82/144
68.45/144
68.45/144
68.45/144
68.45/144
68.45/144
58.12/120
58.12/120
57.02/120
57.02/120
57.05/120
57.05/120
57.05/120
57.05/120
57.05/120
47.48/100
47.48/100
47.48/100
48.37/100
48.37/100
48.37/100
40.96/86
40.96/86
41.61/86
41.61/86
41.61/86
40.98/86
35.99/74
35.99/74
35.99/74
35.49/74
35.49/74
35.45/74
35.45/74

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

CONVENTIONAL CRANK
BALANCED PUMPING UNITS

OILFIELD PRODUCTS GROUP

C
P
H
R
G

API Geometry Dimensions (inches)

Unit Size

C-160D-173-64
C-114D-173-64
C-160D-143-64
C-114D-143-64
C-80D-119-64
C-114D-173-54
C-114D-133-54
C-80D-133-54
C-80D-119-54
C-57D-76-54
C-80D-133-48
C-80D-109-48
C-57D-109-48
C-57D-95-48
C-40D-76-48
C-57D-89-42
C-57D-76-42
C-40D-89-42
C-40D-76-42
C-40D-89-36
C-25D-67-36
C-25D-56-36
C-25D-67-30
C-25D-53-30

84
84
84
84
84
72
72
72
72
72
64
64
64
64
64
56
56
56
56
48
48
48
45
45

84.05
84.05
72.06
72.06
64.00
72.06
64.00
64.00
64.00
64.00
64.00
56.05
56.05
56.05
48.17
48.17
48.17
48.17
48.17
48.17
48.17
48.17
36.22
36.22

I
I

84
84
72
72
64
72
64
64
64
64
64
56
56
56
48
48
48
48
48
48
48
48
36
36

93.75
93.75
84.00
84.00
74.50
84.00
74.50
74.50
74.50
74.50
74.50
65.63
65.63
65.63
57.50
57.50
57.50
57.50
57.50
57.50
57.50
57.50
49.50
49.50

R1, R2, R3, R4

S.U.

166.00
166.00
146.50
146.50
126.13
146.50
126.13
126.13
126.13
115.13
126.13
115.13
115.13
115.13
106.63
106.63
106.63
106.63
106.63
106.63
106.63
106.63
90.50
90.50

69.25
69.25
59.50
59.50
51.13
59.50
51.13
51.13
51.13
47.13
51.13
46.13
46.13
46.13
45.13
45.13
45.13
45.13
45.13
45.13
45.13
45.13
37.00
37.00

32, 27, 22
32, 27, 22
27, 22, 17
27, 22, 17
24, 20, 16
27, 22, 17
24, 20, 16
24, 20, 16
24, 20, 16
24, 20, 16
24, 20, 16
21, 16, 11
21, 16, 11
21, 16, 11
18, 14, 10
18, 14, 10
18, 14, 10
18, 14, 10
18, 14, 10
18, 14, 10
18, 14, 10
18, 14, 10
12, 8
12, 8

550
550
360
360
0
500
330
330
330
330
440
320
320
320
0
150
150
150
150
275
275
275
150
150

T.F. @ 90/Stroke Length

31.02/64
31.02/64
30.59/64
30.59/64
30.85/64
26.22/54
26.45/54
26.45/54
26.45/54
26.45/54
23.51/48
23.30/48
23.30/48
23.30/48
23.10/48
20.27/42
20.27/42
20.27/42
20.27/42
17.37/36
17.37/36
17.37/36
14.53/30
14.53/30

OILFIELD PRODUCTS GROUP

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

CONVENTIONAL CRANK
BALANCED PUMPING UNITS

Structural Data
Unit Size
C-1824D-365-192
C-1280D-365-192
C-912D-365-192
C-912D-305-192
C-912D-365-168
C-640D-365-168
C-912D-305-168
C-640D-305-168
C-456D-305-168
C-912D-427-144
C-912D-365-144
C-640D-365-144
C-640D-305-144
C-456D-305-144
C-640D-256-144
C-456D-256-144
C-320D-256-144
C-640D-365-120
C-456D-365-120
C-640D-305-120
C-456D-305-120
C-456D-256-120
C-320D-256-120
C-456D-213-120
C-320D-213-120
C-228D-213-120
C-320D-305-100
C-456D-256-100
C-320D-256-100
C-228D-213-100
C-228D-173-100
C-160D-173-100
C-320D-246-86
C-228D-246-86
C-320D-213-86
C-228D-213-86
C-160D-173-86
C-114D-119-86
C-320D-246-74
C-228D-200-74
C-160D-200-74
C-228D-173-74
C-160D-173-74
C-160D-143-74
C-114D-143-74
C-160D-173-64
C-114D-173-64
C-160D-143-64
C-114D-143-64
C-80D-119-64
C-114D-173-54
C-114D-133-54
C-80D-133-54
C-80D-119-54
C-57D-76-54
C-80D-133-48
C-80D-109-48
C-57D-109-48
C-57D-95-48
C-40D-76-48
C-57D-89-42
C-40D-89-42
C-57D-76-42
C-40D-76-42
C-40D-89-36
C-25D-67-36
C-25D-56-36
C-25D-67-30
C-25D-53-30

Polished Rod
Capacity (lbs.)

Stroke Lengths
(inches)

Walking
Beam

Wireline Hanger
(inches)

Cranks

Crank Pin
Bearing

Equalizer
Bearing

Center
Bearing

36,500
36,500
36,500
30,500
36,500
36,500
30,500
30,500
30,500
42,700
36,500
36,500
30,500
30,500
25,600
25,600
25,600
36,500
36,500
30,500
30,500
25,600
25,600
21,300
21,300
21,300
30,500
25,600
25,600
21,300
17,300
17,300
24,600
24,600
21,300
21,300
17,300
11,900
24,600
20,000
20,000
17,300
17,300
14,300
14,300
17,300
17,300
14,300
14,300
11,900
17,300
13,300
13,300
11,900
7,600
13,300
10,900
10,900
9,500
7,600
8,900
8,900
7,600
7,600
8,900
6,700
5,600
6,700
5,300

192, 165, 139, 113

192, 165, 139, 113
192, 165, 139, 113
192, 165, 139, 113
168, 145, 124
168, 145, 124
168, 145, 124
168, 145, 124
168, 145, 124
144, 124, 106
144, 124, 106
144, 124, 106
144, 124, 106
144, 124, 106
144, 124, 106
144, 124, 106
144, 124, 106
120, 105, 90
120, 105, 90
120, 102, 85
120, 102, 85
120, 102, 85
120, 102, 85
120, 102, 85
120, 102, 85
120, 102, 85
100, 85, 70
100, 85, 70
100, 85, 70
100, 86, 73
100, 86, 73
100, 86, 73
86, 74, 61
86, 74, 61
86, 74, 62
86, 74, 62
86, 74, 62
86, 72, 59
74, 64, 54
74, 64, 54
74, 64, 54
74, 62, 51
74, 62, 51
74, 62, 51
74, 62, 51
64, 54, 44
64, 54, 44
64, 52, 40
64, 52, 40
64, 53, 42
54, 44, 34
54, 45, 36
54, 45, 36
54, 45, 36
54, 41, 28
48, 40, 32
48, 37, 25
48, 37, 25
48, 37, 25
48, 37, 27
42, 33, 23
42, 33, 23
42, 33, 23
42, 33, 23
36, 28, 20
36, 28, 20
36, 28, 20
30, 20
30, 20

W33 x 221
W33 x 221
W33 x 221
W33 x 201
W33 x 221
W33 x 221
W33 x 201
W33 x 201
W33 x 201
W33 x 221
W33 x 201
W33 x 201
W30 x 173
W30 x 173
W30 x 173
W30 x 173
W30 x 173
W30 x 173
W30 x 173
W27 x 161
W27 x 161
W27 x 146
W27 x 146
W27 x 146
W27 x 146
W27 x 146
W27 x 146
W27 x 146
W27 x 146
W24 x 117
W24 x 104
W24 x 104
W24 x 117
W24 x 117
W24 x 104
W24 x 104
W24 x 104
W24 x 84
W24 x 104
W24 x 94
W24 x 94
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W18 x 71
W18 x 71
W18 x 60
W18 x 71
W18 x 60
W18 x 60
W18 x 60
W16 x 36
W16 x 57
W16 x 45
W16 x 45
W16 x 45
W16 x 36
W16 x 36
W16 x 36
W16 x 36
W16 x 36
W14 x 34
W12 x 26
W12 x 26
W12 x 26
W12 x 26

1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-1/4 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-1/4 x 16 CTRS.
1-1/4 x 16 CTRS.
1-1/4 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-1/4 x 16 CTRS.
1-1/4 x 16 CTRS.
1-1/4 x 16 CTRS.
1-1/4 x 16 CTRS.
1-1/4 x 16 CTRS.
1-3/8 x 12 CTRS.
1-3/8 x 12 CTRS.
1-1/4 x 12 CTRS.
1-1/4 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/4 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 9 CTRS.
1 x 9 CTRS.
1 x 9 CTRS.
1 x 9 CTRS.
1 x 9 CTRS.
1 x 9 CTRS.
1 x 9 CTRS.
1 x 9 CTRS.
1 x 9 CTRS.
1 x 9 CTRS.
1 x 9 CTRS.
1 x 9 CTRS.
1 x 9 CTRS.
7/8 x 9 CTRS.
7/8 x 9 CTRS.
7/8 x 9 CTRS.
3/4 x 9 CTRS.
7/8 x 9 CTRS.
7/8 x 9 CTRS.
7/8 x 9 CTRS.
7/8 x 9 CTRS.
7/8 x 9 CTRS.
3/4 x 6-1/2 CTRS.
3/4 x 6-1/2 CTRS.
3/4 x 6-1/2 CTRS.
3/4 x 6-1/2 CTRS.
3/4 x 6-1/2 CTRS.
5/8 x 6-1/2 CTRS.
5/8 x 6-1/2 CTRS.
5/8 x 6-1/2 CTRS.
1/2 x 6-1/2 CTRS.

106110CA
106110CA
106110CA
106110CA
94110CA
94110CA
94110CA
94110CA
94110CA
94110CA
94110CA
94110CA
94110CA
94110CA
94110CA
94110CA
94110CA
94110CA
94110CA
8495CA
8495CA
8495CA
8495CA
8495CA
8495CA
8495CA
8495CA
8495CA
8495CA
7478CA
7478CA
7478CA
8495CA
8495CA
7478CA
7478CA
7478CA
6468CA
7478CA
7478CA
7478CA
6468CA
6468CA
6468CA
6468CA
6468CA
6468CA
5456CA
5456CA
4850BA
5456CA
4850BA
4850BA
4850BA
4246BA
4850BA
4246BA
4246BA
4246BA
3644BA
3644BA
3644BA
3644BA
3644BA
3644BA
3644BA
3644BA
2436BA
2436BA

1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
3SF
3SF
3SF
3SF
3SF
3SF
3SF
4SF
3SF
3SF
3SF
3SF
3SF
4SF
4SF
4SF
4SF
4SF
4SF
5SA
4SF
5SA
5SA
5SA
5SA
5SA
5SA
5SA
5SA
6
6
6
6
6
6
6
6
6
6

ORA
ORA
ORA
ORA
ORA
ORA
ORA
ORA
ORA
ORA
ORA
ORA
ORA
ORA
ORA
ORA
ORA
ORA
ORA
ORA
ORA
1RA
1RA
1RA
1RA
1RA
1RA
1RA
1RA
1RA
2RB
2RB
2RB
2RB
2RB
2RB
2RB
3RA
2RB
2RB
2RB
2RB
2RB
3RA
3RA
3RA
3RA
3RA
3RA
4RA
3RA
4RA
4RA
4RA
5R
4RA
5R
5R
5R
7R
7R
7R
7R
7R
7R
7R
7R
7R
7R

OTGB
OTGB
OTGB
OTGB
OTGB
OTGB
OTGB
OTGB
OTGB
OTGB
OTGB
OTGB
1TGC
1TGC
1TGC
1TGC
1TGC
0TGB
OTGB
1TGC
1TGC
2TGC
2TGC
2TGC
2TGC
2TGC
2TGC
2TGC
2TGC
2TGC
2TGC
2TGC
2TGC
2TGC
2TGC
2TGC
2TGC
4TG
2TGC
2TGC
2TGC
2TGC
2TGC
4TG
4TG
4TG
4TG
4TG
4TG
4TG
4TG
4TG
4TG
4TG
5C
4TG
5C
5C
5C
6CA
6CA
6CA
6CA
6CA
6CA
6CA
6CA
6CA
6CA

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

Counterbalance Data

Unit Size
Stroke
Structural Unbalance
Cranks

3,215
19,970
24,915
29,860
16,535
20,555
24,575
14,835
18,695
22,555
13,045
16,090
19,135
10,865
13,215
15,565
9,580
11,860
14,140
8,340
10,550
12,760
....
....
....
....
....
....

C-320D-246-74
C-228D-200-74
C-160D-200-74

74
+ 800 lbs.
Cranks
7478CA
CBal., Cranks Only
5,960
4 No. 2RO Counterweights
15,870
4 No. 2S Aux. Weights
19,425
4 No. 3CRO Counterweights
14,110
4 No. 3BS Aux. Weights
17,625
8 No. 3BS Aux. Weights
*21,140
4 No. 5ARO Counterweights
12,025
4 No. 5A Aux. Weights
14,460
8 No. 5A Aux. Weights
***16,890
4 No. 5CRO Counterweights
10,445
4 No. 5C Aux. Weights
12,660
8 No. 5C Aux. Weights
***14,880
4 No. 6RO Counterweights
9,460
4 No. 6 Aux. Weights
10,780
8 No. 6 Aux. Weights
12,100
4 No. 7RO Counterweights
8,205
4 No. 7 Aux. Weights
9,210
8 No. 7 Aux. Weights
10,215
Stroke

Structural Unbalance

OILFIELD PRODUCTS GROUP

(shown in lbs., effective at polished rod with weights at maximum position, including structural unbalance.)

C-912D-365-168
C-912D-305-168
C-1280D-365-192 C-640D-365-168
C-912D-365-192 C-640D-305-168
C-1824D-365-192 C-912D-305-192 C-456D-305-168
192
192
168
1985 lbs.
1800 lbs.
1,500 lbs.
106110CA
106110CA
94110CA

CBal., Cranks Only

4 No. OOROL Counterweights
4 No. OOSL Aux. Weights
8 No. OOSL Aux. Weights
4 No. OORO Counterweights
4 No. OOS Aux. Weights
8 No. OOS Aux. Weights
4 No. ORO Counterweights
4 No. OS Aux. Weights
8 No. OS Aux. Weights
4 No. OARO Counterweights
4 No. OAS Aux. Weights
8 No. OAS Aux. Weights
4 No. 1RO Counterweights
4 No. 1S Aux. Weights
8 No. 1S Aux. Weights
4 No. 2RO Counterweights
4 No. 2S Aux. Weights
8 No. 2S Aux. Weights
4 No. 3CRO Counterweights
4 No. 3BS Aux. Weights
8 No. 3BS Aux. Weights
4 No. 5ARO Counterweights
4 No. 5A Aux. Weights
8 No. 5A Aux. Weights
4 No. 5CRO Counterweights
4 No. 5C Aux. Weights
8 No. 5C Aux. Weights

Unit Size

CONVENTIONAL CRANK
BALANCED PUMPING UNITS

3,400
20,155
25,100
30,045
16,720
20,740
24,760
15,020
18,880
22,740
13,230
16,275
19,320
11,050
13,400
15,750
9,765
12,045
14,325
8,525
10,735
12,945
....
....
....
....
....
....

4,360
....
....
....
19,370
23,900
28,430
17,455
21,805
26,150
15,440
18,870
22,300
12,980
15,630
18,280
11,535
14,105
16,675
10,135
12,625
*15,115
8,505
10,165
*11,825
7,430
8,945
10,465

C-912D-427-144
C-912D-427-144 C-640D-305-144
C-640D-365-144 C-456D-305-144
144
144
650 lbs.
520 lbs.
94110CA
94110CA

6,190
....
....
....
23,710
28,995
34,285
21,475
26,550
31,625
19,125
23,130
27,130
16,250
19,345
22,435
14,565
17,565
20,565
12,935
15,840
*18,745
11,025
12,965
*14,905
9,775
11,545
13,315

6,360
....
....
....
23,970
....
....
21,725
26,825
....
19,360
23,385
27,410
16,470
19,580
22,690
14,775
17,790
20,810
13,135
16,055
18,980
11,200
13,165
15,115
9,960
11,740
13,520

C-640D-256-144
C-456D-256-144
C-320D-256-144
144
400 lbs.
94110CA

6,480
....
....
....
....
....
....
21,845
....
....
19,480
23,505
....
16,590
19,700
*22,810
14,895
17,910
*20,930
13,255
16,175
*19,100
11,340
13,285
*15,235
10,080
11,860
13,640

C-640D-365-120 C-640D-305-120
C-456D-365-120 C-456D-305-120
120
120
+ 570 lbs.
120 lbs.
94110CA
8495CA

8,670
....
....
....
29,415
35,670
....
26,765
32,775
....
23,980
28,725
33,465
20,580
24,240
27,905
18,585
22,135
25,690
16,650
20,095
23,535
14,395
16,690
18,985
12,910
15,005
17,105

5,570
....
....
....
....
....
....
20,430
25,365
....
18,305
22,250
26,190
15,505
18,555
21,610
13,845
16,810
19,770
12,285
15,175
18,070
10,475
12,445
14,410
9,185
10,970
12,755

C-228D-173-74
C-160D-173-74

C-160D-143-74
C-114D-143-74

C-160D-173-64
C-114D-173-64

C-160D-143-64
C-114D-143-64

C-80D-119-64

C-114D-173-54

C-114D-133-54
C-80D-133-54

74
+ 450 lbs.
6468CA
4,235
....
....
11,005
13,925
16,840
9,360
11,410
*13,465
8,040
9,915
*11,795
7,220
8,345
9,470
6,160
7,020
7,880

74
+ 300 lbs.
6468CA
4,090
....
....
10,870
13,790
....
9,220
11,275
*13,330
7,900
9,780
*11,660
7,075
8,205
9,330
6,015
6,880
7,740

64
+550 lbs.
6468CA
4,880
....
....
12,630
15,965
....
10,745
13,090
*15,440
9,235
11,380
*13,530
8,295
9,580
10,870
7,085
8,070
9,050

64
+ 360 lbs.
5456CA
2,665
....
....
8,605
11,165
13,725
7,290
9,145
*10,995
6,120
7,830
*9,535
5,400
6,430
7,460
4,440
5,235
6,030

64
0 lbs.
4850BA
2,155
....
....
....
....
....
6,120
7,740
....
5,135
6,610
....
4,515
5,405
6,295
3,700
4,395
5,090

54
+ 500 lbs.
5456CA
3,190
....
....
10,115
13,105
16,090
8,585
10,745
12,910
7,220
9,210
11,205
6,380
7,580
8,785
5,260
6,190
7,115

54
+ 330 lbs.
4850BA
2,845
....
....
....
....
....
7,470
9,360
11,250
6,320
8,040
9,760
5,595
6,635
7,675
4,645
5,460
6,270

* Use only one aux. weight per counterweight on belt cover side on 912D, 320D & 160D units.
** Use only one aux. weight per counterweight on belt cover side on 320D & 228D units.
*** Use only one aux. weight per counterweight on belt cover side on 160D units.

OILFIELD PRODUCTS GROUP

Counterbalance Data
Unit Size
Stroke
Structural Unbalance
Cranks

CBal., Cranks Only

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

CONVENTIONAL CRANK
BALANCED PUMPING UNITS

(shown in lbs., effective at polished rod with weights at maximum position, including structural unbalance.)

C-456D-256-120
C-320D-256-120

C-456D-213-120
C-320D-213-120
C-228D-213-120

C-456D-256-100
C-320D-256-100
C-320D-305-100

C-228D-213-100
C-228D-173-100
C-160D-173-100

C-320D-246-86
C-228D-246-86

C-320D-213-86
C-228D-213-86

C-160D-173-86

C-114D-119-86

120
+ 55 lbs.
8495CA

120
0 lbs.
8495CA

100
+ 550 lbs.
8495CA

100
+ 0 lbs.
7478CA

86
+ 800 lbs.
8495CA

86
+ 450 lbs.
7478CA

86
+ 450 lbs.
7478CA

86
+ 115 lbs.
6468CA

5,740

5,685

7,330

3,910

8,720

4,910

4,910

3,395

4 No. ORO Counterweights

20,595

....

....

....

....

....

....

....

4 No. OARO Counterweights

4 No. OAS Aux. Weights
4 No. 1RO Counterweights
4 No. 1S Aux. Weights
8 No. 1S Aux. Weights
4 No. 2RO Counterweights
4 No. 2S Aux. Weights
8 No. 2S Aux. Weights
4 No. 3CRO Counterweights
4 No. 3BS Aux. Weights
8 No. 3BS Aux. Weights
4 No. 5ARO Counterweights
4 No. 5A Aux. Weights
8 No. 5A Aux. Weights
4 No. 5CRO Counterweights
4 No. 5C Aux. Weights
8 No. 5C Aux. Weights
4 No. 6RO Counterweights
4 No. 6 Aux. Weights
8 No. 6 Aux. Weights
4 No. 7RO Counterweights
4 No. 7 Aux. Weights
8 No. 7 Aux. Weights

18,470
22,415
15,670
18,725
21,775
14,010
16,975
19,935
12,450
15,345
*18,235
10,645
12,615
*14,580
9,355
11,140
12,920
....
....
....
....
....
....

18,415
....
15,615
18,670
....
13,955
16,920
19,880
12,395
15,290
**18,180
10,590
12,560
*14,525
9,300
11,085
12,865
....
....
....
....
....
....

22,510
27,210
19,170
22,810
26,450
17,195
20,725
24,260
15,330
18,780
22,230
13,180
15,525
*17,870
11,640
13,765
15,895
10,675
11,935
13,195
9,465
10,420
11,375

....
....
12,855
15,605
18,355
11,425
14,120
16,810
10,090
12,755
*15,420
8,510
10,355
*12,195
7,310
8,990
*10,670
6,565
7,565
8,565
5,615
6,375
7,135

....
....
22,545
....
....
20,235
....
....
18,065
22,090
....
15,550
18,290
*21,030
13,750
16,235
18,720
12,625
14,100
15,570
11,210
12,330
13,445

....
....
....
....
....
13,490
16,560
19,635
11,965
15,005
*18,045
10,160
12,265
14,370
8,795
10,710
12,630
7,940
9,085
10,225
6,855
7,725
8,595

....
....
....
....
....
13,490
16,560
....
11,965
15,005
....
10,160
12,265
*14,370
8,795
10,710
*12,630
7,940
9,085
10,225
6,855
7,725
8,595

....
....
....
....
....
10,430
....
....
9,255
11,780
....
7,830
9,605
11,385
6,685
8,315
9,940
5,975
6,950
7,925
5,060
5,805
6,550

C-40D-76-48

C-57D-89-42
C-57D-76-42
C-40D-89-42
C-40D-76-42

C-40D-89-36
C-25D-67-36
C-25D-56-36

Unit Size

Stroke
Structural Unbalance
Cranks

C-80D-119-54

C-57D-76-54

C-80D-133-48

C-80D-109-48
C-57D-109-48
C-57D-95-48

C-25D-67-30
C-25D-53-30

54

54

48

48

48

42

36

30

+ 300 lbs.

0 lbs.

+ 440 lbs.

+ 320 lbs.

0 lbs.

+ 150 lbs.

+ 275 lbs.

+ 150 lbs.

4850BA

4246BA

4850BA

4246BA

3644BA

3644BA

3644BA

2436BA

CBal., Cranks Only

2,845

1,650

3,270

2,175

1,340

1,675

2,055

1,370

4 No. 5ARO Counterweights

4 No. 5A Aux. Weights
8 No. 5A Aux. Weights
4 No. 5CRO Counterweights
4 No. 5C Aux. Weights
8 No. 5C Aux. Weights
4 No. 6RO Counterweights
4 No. 6 Aux. Weights
8 No. 6 Aux. Weights
4 No. 7RO Counterweights
4 No. 7 Aux. Weights
8 No. 7 Aux. Weights

7,470
9,360
....
6,320
8,040
....
5,595
6,635
7,675
4,645
5,460
6,270

5,760
7,440
....
4,750
6,285
....
4,120
5,050
5,985
3,275
4,005
4,740

8,475
10,595
....
7,175
9,115
....
6,365
7,535
8,705
5,295
6,210
7,125

6,800
8,690
....
5,665
7,395
....
4,955
6,005
7,055
4,005
4,830
5,655

....
....
....
4,525
6,160
....
3,995
5,000
....
3,090
3,885
....

....
....
....
5,300
7,165
....
4,700
5,840
*6,985
3,670
4,570
*5,475

....
....
....
6,285
....
....
5,580
6,915
....
4,380
5,435
....

....
....
....
....
....
....
4,400
5,540
....
3,400
4,320
....

* Use only one aux. weight per counterweight on belt cover side on 320D, 160D & 40D units.
** Use only one aux. weight per counterweight on belt cover side on 320D & 228D units.
*** Use only one aux. weight per counterweight on belt cover side on 160D units.
EXAMPLE: A C-456D-256-120 Unit with 4 No. 2RO Counterweights and 4 No. 2S Auxiliary Weights would have a maximum counterbalance effect of 16,975 pounds in the 120" stroke.
This effect includes a structural unbalance of +55 pounds. If the counterbalance effect is desired for the 85" stroke, subtract the structural unbalance from the effect in the 120" stroke and
multiply this difference by the ratio of 120 85, then add the structural unbalance to this product. Thus, counterbalance effect in the 85" stroke = [16,975 (+55)] x 120/85 + (+55) =
16,920 x 120/85 +55 = 23,942 pounds. Structural unbalance with a negative ( ) sign indicates a walking beam assembly that is heavy on the well end. Structural unbalance without the
negative sign indicates a walking beam assembly that is heavy on the gear reducer end.
NOTE: To convert effective counterbalance to maximum counterbalance torque for dynamometer card analysis, multiply the pounds counterbalance, minus the structural unbalance, by
the torque factor at the 90 crank position.

10

MARK II UNITORQUE
PUMPING UNITS

The Mark II Pumping Unit, due to its unique geometry and phased counterbalance feature, lowers peak torque and horsepower requirements. The
unusual geometry of the Mark II produces a somewhat slower up stroke and
faster down stroke with reduced acceleration where the load is greatest,
resulting in lower peak loads and longer rod life.

OILFIELD PRODUCTS GROUP

Mark II Geometry Reduces

Rod Load and Peak Torque

The Mark II's unique UNITORQUE geometry is characterized by three (3) basic configurations which
reduce the rod load and peak torque over that of a
conventional pumping unit. The design characteristics
which make the Mark II unique are:
Shifting the gearbox from directly under the
equalizer towards the Samson post turning in a
preferred direction of rotation, creates an upstroke
that occurs in approximately 195 of crank rotation and a downstroke of approximately 165 of
crank rotation.
Placing the equalizer between the horsehead and
the Samson post creates a push-up or Class 3
lever system.
The 195 upstroke, coupled with the front mounted geometry, reduces the acceleration at the
beginning of the upstroke where the load is greatest, thereby effecting a reduction in polished rod
load. Locating the cross-yoke forward of the gear
reducer creates a greater mechanical advantage
for lifting the heavy load on the upstroke, and a
lesser mechanical advantage for the reduced
downstroke load (i.e., the maximum upstroke
torque factor is reduced while the maximum
downstroke torque factor is increased).
An angular offset in the crank that produces a
more effective counterbalance torque which at
the beginning of the upstroke lags the well load
torque approximately 712. Similarly, at the beginning of the downstroke, this same offset condition
produces a counter balance torque which leads
the well load torque approximately 712.
Independently these features would not produce a
relatively uniform torque, but working together a
unitorque system is obtained which can reduce
the torque on the gearbox up to 35% as well as
lowering power costs and often, prime mover size.

12

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

MARK II UNITORQUE
PUMPING UNITS

(+) Torque on gear reducer

produced by well load
(-) Torque on gear reducer
produced by counterweights
(+) Net torque on reducer
(well load torque C'bal. torque)

T
0

7-1/2

180

180
195 Upstroke
C'bal. torque lags
well load torque

360

7-1/2
165 Upstroke
C'bal. torque leads
well load torque

Uniform torque can be obtained under ideal conditions.

NOTE: The Mark II Unit must be operated in a counter-clockwise direction
(standing at the side of the unit with the wellhead to the right).

Two-Point Suspension bases are standard for all Lufkin Mark II Pumping
Units. The two-point base permits the use of small salvageable precast concrete
blocks or fabricated foundation pads under the front and rear of the unit. Precast
concrete blocks reduce concrete requirements by approximately 80%. This simple base suspension/foundation design significantly reduces installation time.

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

MARK II UNITORQUE
PUMPING UNITS

OILFIELD PRODUCTS GROUP

B
A

INSIDE OF AUX. WT.

DRIVE

C
V

MAX.

MIN.

T
D

MULTI
CYLINDER
ENGINE

AE
BOTTOM OF STROKE

AG
AB
J

L
N
W

E
R

Dimensional Data
Unit Size
M-1824D-427-216
M-1280D-427-216
M-1280D-427-192
M-912DS-365-216
M-912DS-427-192
M-912DS-427-168
M-912D-305-216
M-912D-305-192
M-912D-365-168
M-912D-305-168
M-912D-365-144
M-912D-305-144
M-640D-305-192
M-640D-365-168
M-640D-305-168
M-640D-365-144
M-640D-305-144
M-640D-256-144
M-640D-305-120
M-456D-305-192
M-456D-305-168
M-456D-365-144
M-456D-305-144
M-456D-256-144
M-456D-365-120
M-456D-305-120
M-456D-256-120

(inches)

306
306
306
306
306
270
306
306
270
270
258
258
306
270
270
258
258
258
258
306
270
258
258
258
258
258
258

384
384
384
384
384
334
384
384
334
334
312
312
384
334
334
312
312
312
312
384
334
312
312
312
312
312
312

329.88
329.88
329.88
329.88
329.88
276.88
329.88
329.88
276.88
276.88
252.88
252.88
329.88
276.88
276.88
252.88
252.88
252.88
252.88
329.88
276.88
252.88
252.88
252.88
252.88
252.88
252.88

55
55
55
55
55
50
55
55
50
50
50
50
55
50
50
50
50
50
50
55
50
50
50
50
50
50
50

223.00
223.00
223.00
223.00
223.00
218.75
223.00
223.00
218.75
218.75
218.75
218.75
223.00
218.75
218.75
218.75
218.75
218.75
218.75
223.00
218.75
218.75
218.75
218.75
218.75
218.75
218.75

333.75
341.50
341.50
331.50
331.50
298.25
326.50
326.50
298.25
298.25
298.25
298.25
326.50
298.25
298.25
298.25
298.25
298.25
298.25
326.50
298.25
298.25
298.25
298.25
298.25
298.25
298.25

67.00
57.25
57.25
53.63
53.63
53.63
53.63
53.63
53.63
53.63
53.63
53.63
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88

569
569
550
569
550
477
569
550
471
471
426
426
550
471
471
426
426
422
399
550
471
426
426
434
399
399
400

44.38
44.38
63.25
44.38
63.25
32.38
44.38
63.25
40.25
40.25
33.63
33.63
63.25
40.25
40.25
33.63
33.63
47.25
59.75
63.25
40.25
33.63
33.63
47.50
59.75
59.75
73.88

130
130
130
130
130
108
130
130
108
108
108
108
130
108
108
108
108
108
108
130
108
108
108
108
108
108
108

25.38
31.75
31.75
23.00
23.00
25.50
23.00
23.00
25.50
25.50
25.50
25.50
26.63
24.13
24.13
24.13
24.13
24.13
24.13
29.75
31.00
31.00
31.00
31.00
31.00
31.00
31.00

75.50 101.00 18 45.00 58.88 105.88 52

75.50 96.00 18 45.00 52.50 120.00 52
80.25 96.00 18 45.00 52.50 120.00 52
75.50 96.00 18 45.00 48.50 109.50 52
80.25 96.00 18 45.00 48.50 109.50 52
85.25 81.50 18 48.00 48.50 108.38 52
75.50 96.00 18 45.00 48.50 109.50 47
80.25 96.00 18 45.00 48.50 109.50 47
77.13 81.50 18 48.00 48.50 108.38 52
77.13 81.50 18 48.00 48.50 108.38 52
83.75 81.50 18 42.50 48.50 108.38 52
83.75 81.50 18 42.50 48.50 108.38 52
80.25 96.00 18 45.00 41.50 116.50 47
77.13 81.50 18 48.00 41.50 115.25 52
77.13 81.50 18 48.00 41.50 115.25 52
83.75 81.50 18 42.50 41.50 115.25 52
83.75 81.50 18 42.50 41.50 115.25 52
71.63 81.50 18 42.50 41.50 115.25 52
80.75 81.50 18 42.50 41.50 115.25 52
80.25 96.00 18 45.00 38.38 119.63 47
77.13 81.50 18 48.00 38.38 115.25 52
83.75 81.50 18 42.50 38.38 115.25 52
83.75 81.50 18 42.50 38.38 115.25 52
71.63 81.50 18 42.50 38.38 115.25 52
80.75 81.50 18 42.50 38.38 115.25 52
80.75 81.50 18 42.50 38.38 115.25 52
70.00 81.50 18 42.50 38.38 115.25 52

AB

AE

AG

48.50
48.50
48.50
48.50
48.50
50.00
48.50
48.50
50.00
50.00
50.00
50.00
48.50
50.00
50.00
50.00
50.00
50.00
50.00
48.50
50.00
50.00
50.00
50.00
50.00
50.00
50.00

124.00
114.00
114.00
107.00
107.00
107.00
109.00
109.00
105.00
105.00
105.00
103.38
105.00
101.00
101.00
101.00
99.38
99.38
99.38
105.00
101.00
101.00
99.38
99.38
101.00
99.50
99.50

108.50
108.50
108.50
108.50
108.50
114.38
108.50
108.50
90.38
90.38
90.38
90.38
108.50
90.38
90.38
90.38
90.38
90.38
90.38
108.50
90.38
90.38
90.38
90.38
90.38
90.38
90.38

26.00
26.00
26.00
26.00
26.00
23.38
26.00
26.00
23.38
23.38
18.00
18.00
26.00
23.38
23.38
18.00
18.00
18.00
18.00
26.00
23.38
18.00
18.00
18.00
18.00
18.00
18.00

51
51
51
59
59
46
59
59
46
46
46
46
60
46
46
46
46
46
46
60
46
46
46
46
46
46
46

NOTE: Do not use the above dimensions for foundation. Request a foundation plan.
The above units are designed to be installed on "two point" foundations.
Standard API models shown, other models available on request.

13

OILFIELD PRODUCTS GROUP

MAX.

MIN.

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

MARK II UNITORQUE
PUMPING UNITS

T
B
A

AG

INSIDE OF
AUX. WT.

I
V

MAX.

MULTI
CYLINDER
ENGINE

MIN.

MAX.

MIN.

UU

VV

DRIVE

MULTI
CYLINDER
ENGINE

MIN.

AE
BOTTOM OF STROKE

AB

AA

J
L
N
W
M
X

E
R

Dimensional Data
Unit Size*
M-320D-256-144
M-320D-305-120
M-320D-256-120
M-320D-213-120
M-320D-305-100
M-320D-256-100
M-228D-256-120
M-228D-213-120
M-228D-256-100
M-228D-173-100
M-228D-246-86
M-228D-213-86
M-228D-200-74
M-228D-173-74
M-160D-213-86
M-160D-173-86
M-160D-200-74
M-160D-173-74
M-114D-143-86
M-114D-173-74
M-114D-143-74
M-114D-173-64
M-114D-143-64

(inches)

258
258
258
258
258
258
258
258
258
258
186
186
186
186
186
186
186
186
162
186
162
162
162

312
312
312
312
312
312
312
312
312
312
222
222
222
222
222
222
222
222
189
222
189
189
189

252.88
252.88
252.88
252.88
252.88
252.88
252.88
252.88
252.88
252.88
188.38
188.38
188.38
188.38
188.38
188.38
188.38
188.38
147.50
188.38
147.50
147.50
147.50

33.25
33.25
33.25
33.25
33.25
33.25
28.75
28.75
28.75
28.75
29.25
29.25
29.25
29.25
33.75
33.75
33.75
30.00
30.00
30.75
30.00
30.00
30.00

258.38
258.38
258.38
258.38
258.38
258.38
258.38
258.38
258.38
258.38
188.00
187.63
187.63
187.63
187.63
187.63
187.63
187.63
161.00
188.38
161.00
161.00
161.00

*
*
*
*
*
*
334.38
334.38
334.38
*
263.50
263.13
263.13
263.13
252.63
252.63
252.63
252.63
236.50
263.13
236.50
236.50
236.50

42.75
42.75
42.75
42.75
42.75
42.75
38.50
38.50
38.50
38.50
38.50
38.50
38.50
38.50
32.50
32.50
32.50
32.50
28.75
28.75
28.75
28.75
28.75

442
407
406
406
388
381
406
406
381
381
308
305
295
294
305
305
295
294
257
294
247
238
238

47.63
65.00
69.00
69.00
84.63
88.38
69.00
69.00
88.38
88.38
45.25
45.25
52.88
52.88
45.25
41.13
52.88
52.88
14.00
52.88
27.75
21.00
21.00

108.00
108.00
108.00
108.00
108.00
108.00
108.00
108.00
108.00
108.00
86.63
86.63
86.63
86.63
86.63
86.63
86.63
86.63
62.00
86.63
62.00
62.00
62.00

35.38
35.38
35.38
35.75
35.38
35.38
41.63
41.63
41.63
41.63
22.88
22.88
22.88
22.88
24.56
24.56
24.56
24.56
20.25
28.00
20.25
20.25
20.25

76.88
87.00
80.75
80.75
83.13
81.25
80.75
80.75
81.25
81.25
75.50
72.50
73.25
72.88
72.50
72.13
73.25
72.88
57.13
72.88
56.88
71.63
71.63

75.75
75.75
75.75
75.75
75.75
75.75
75.75
75.75
75.75
75.75
57.25
57.25
57.25
57.25
54.25
54.25
54.25
54.25
42.75
54.25
42.75
42.75
42.75

24
24
24
24
24
24
24
24
24
24
24
21
21
21
21
21
21
21
16
21
16
16
16

60
60
60
60
60
60
60
60
60
60
39
39
39
39
39
39
39
39
32
39
32
32
32

34
34
34
34
34
34
30
30
30
30
30
30
30
30
26
26
26
26
24
24
24
24
24

*
*
*
*
*
*
176.25
176.25
176.25
176.25
116.50
116.13
116.13
116.13
106.63
106.63
106.63
106.63
108.50
122.13
108.50
108.50
108.50

*
*
*
*
*
*
47.50
47.50
47.50
47.50
47.50
47.50
47.50
47.50
55.00
55.00
55.00
55.00
52.00
52.00
52.00
52.00
52.00

AA

43 88.38 86
43 88.38 86
43 88.38 86
43 88.38 86
43 88.38 86
43 88.38 86
37 81.38 86
37 81.38 86
37 81.38 86
37 81.38 86
37 80.38 **
37 103.38 **
37 103.38 **
37 103.38 **
32 72.38 **
32 72.38 **
32 72.38 **
32 72.38 **
25 67.38 **
25 69.00 **
25 67.38 **
25 67.38 **
25 67.38 **

AB

AE

AG

*
*
*
*
*
*
95.25
95.25
95.25
95.25
73.38
70.38
70.38
70.38
78.13
78.13
78.13
78.13
44.38
70.38
44.38
44.38
44.38

18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
16.00
11.38
16.00
16.00
16.00

46.00
46.00
46.00
46.00
46.00
46.00
50.25
50.25
50.25
50.25
41.50
41.50
41.50
41.50
38.63
38.63
38.63
38.63
35.75
41.63
35.75
35.75
35.75

* On 100", 120" and 144" stroke units, on this page multi-cylinder engines are mounted on main base beams forward of Samson Post. See dimensions UU, VV, and AA.
** On 64", 74" and 86" stroke units, multi-cylinder engines are mounted behind the Samson Post. See dimensions U, V, and AB.
NOTE: Do not use the above dimensions for foundation. Request a foundation plan.
The above units are designed to be installed on "two point" foundations.
Standard API models shown, other models available on request.

14

UU VV
88
88
88
88
88
88
92
92
92
92
**
**
**
**
**
**
**
**
**
**
**
**
**

55
55
55
55
55
55
55
55
55
55
**
**
**
**
**
**
**
**
**
**
**
**
**

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

MARK II UNITORQUE
PUMPING UNITS

OILFIELD PRODUCTS GROUP

In January 1961, Lufkin began manufacturing

the now famous Mark II pumping unit with its
innovative, uniform torque system. Joe Byrd,
inventor of the Mark II, came to work for the
Company at the same time.

H
R

API Geometry Dimensions

(inches)

Unit Size

R1, R2, R3, R4

PHASE
ANGLE

S.U.

T.F. @ (90 - )
/Stroke Length

384.00
384.00
384.00
384.00
384.00
384.00
384.00
384.00
384.00
334.00
334.00
334.00
334.00
334.00
334.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
222.00
222.00
222.00
222.00
189.00
222.00
222.00
222.00
222.00
222.00
189.00
189.00
189.00

306.00
306.00
306.00
306.00
306.00
306.00
306.00
306.00
306.00
270.00
270.00
270.00
270.00
270.00
270.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
186.00
186.00
186.00
186.00
162.00
186.00
186.00
186.00
186.00
186.00
162.00
162.00
162.00

228.00
228.00
228.00
228.00
228.00
228.00
228.00
228.00
228.00
203.00
202.56
202.56
202.56
202.56
202.56
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
124.00
124.00
124.00
124.00
111.00
124.00
124.00
124.00
124.00
124.00
111.00
111.00
111.00

234.38
234.38
234.38
234.38
228.06
228.06
228.06
228.06
228.06
196.50
193.50
193.50
193.50
193.50
193.50
182.38
182.38
182.38
182.38
182.38
182.38
182.38
182.38
182.38
173.75
173.75
173.75
173.75
173.75
173.75
173.75
173.75
173.75
173.75
173.75
173.75
173.75
135.75
135.75
135.75
135.75
112.19
130.50
130.50
130.50
130.50
130.50
107.94
107.94
107.94

346.00
346.00
346.00
346.00
346.00
346.00
346.00
346.00
346.00
295.13
295.13
295.13
295.13
295.13
295.13
271.13
271.13
271.13
271.13
271.13
271.13
271.13
271.13
276.88
271.88
271.13
271.13
271.13
271.13
276.88
276.88
276.88
276.88
277.13
276.88
276.88
276.88
212.50
209.50
209.50
209.50
163.63
209.50
209.50
163.63
163.63
163.63
163.63
163.63
163.63

132.00
132.00
132.00
132.00
132.00
132.00
132.00
132.00
132.00
112.13
112.13
112.13
112.13
112.13
112.13
112.13
112.13
112.13
112.13
112.13
112.13
112.13
112.13
117.88
112.13
112.13
112.13
118.13
112.13
117.88
117.88
117.88
117.88
118.13
117.88
117.88
117.88
97.13
94.13
94.13
94.13
68.13
94.13
94.13
68.13
68.13
68.13
68.13
68.13
68.13

80.06, 71.06, 62.06

80.06, 71.06, 62.06
80.06, 71.06, 62.06
80.06, 71.06, 62.06
71.69, 62.69, 53.69
71.69, 62.69, 53.69
71.69, 62.69, 53.69
71.69, 62.69, 53.69
71.69, 62.69, 53.69
63.56, 56.56, 49.56
63.56, 56.56, 49.56
63.56, 56.56, 49.56
63.56, 56.56, 49.56
63.56, 56.56, 49.56
63.56, 56.56, 49.56
53.75, 47.75, 41.75
53.75, 47.75, 41.75
53.75, 47.75, 41.75
53.75, 47.75, 41.75
53.75, 47.75, 41.75
53.75, 47.75, 41.75
53.75, 47.75, 41.75
53.75, 47.75, 41.75
53.75, 47.75, 41.75
45.13, 39.13, 33.13
45.13, 39.13, 33.13
45.13, 39.13, 33.13
45.13, 39.13, 33.13
45.13, 39.13, 33.13
45.13, 39.13, 33.13
45.13, 39.13, 33.13
45.13, 39.13, 33.13
45.13, 39.13, 33.13
37.63, 31.63, 25.63
37.63, 31.63, 25.63
37.63, 31.63, 25.63
37.63, 31.63, 25.63
31.5, 26.5, 21.5
31.5, 26.5, 21.5
31.5, 26.5, 21.5
31.5, 26.5, 21.5
32.25, 27.75, 23.25
27.25, 22.25, 17.25
27.25, 22.25, 17.25
27.25, 22.25, 17.25
27.25, 22.25, 17.25
27.25, 22.25, 17.25
27.94, 23.44, 18.94
24.19, 19.69, 15.19
24.19, 19.69, 15.19

22.0
22.0
22.0
22.0
19.5
19.5
19.5
19.5
19.5
19.0
19.0
19.0
19.0
19.0
19.0
23.0
23.0
23.0
23.0
23.0
23.0
23.0
23.0
23.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.5
24.5
24.5
24.5
27.0
24.5
24.5
24.5
24.5
24.5
27.0
28.0
28.0

-7450
-7450
-7450
-7450
-7160
-7160
-7160
-7160
-7160
-6820
-5385
-4860
-5385
-4860
-4860
-4680
-4680
-4680
-4300
-4300
-4300
-4010
-4010
-4010
-4510
-4130
-4130
-4130
-3840
-3620
-3435
-3560
-3235
-3700
-3470
-3285
-3175
-2140
-2040
-2040
-1930
-1535
-1960
-1890
-1860
-1860
-1820
-1440
-1420
-1420

93.734/216
93.734/216
93.734/216
93.734/216
86.074/192
86.074/192
86.074/192
86.074/192
86.074/192
75.207/168
75.207/168
75.207/168
75.207/168
75.207/168
75.207/168
63.023/144
63.023/144
63.023/144
63.023/144
63.023/144
63.023/144
63.023/144
63.023/144
63.023/144
53.595/120
53.621/120
53.621/120
53.621/120
53.621/120
53.621/120
53.621/120
53.621/120
53.621/120
45.497/100
45.497/100
45.497/100
45.497/100
38.328/86
38.328/86
38.328/86
38.328/86
36.019/86
33.523/74
33.523/74
33.523/74
33.523/74
33.523/74
32.562/74
28.549/64
28.549/64

M-1824D-427-216
M-1280D-427-216
M-912D-305-216
M-912DS-365-216
M-1280D-427-192
M-912DS-427-192
M-912D-305-192
M-640D-305-192
M-456D-305-192
M-912DS-427-168
M-912D-365-168
M-912D-305-168
M-640D-365-168
M-640D-305-168
M-456D-305-168
M-912D-365-144
M-640D-365-144
M-456D-365-144
M-912D-305-144
M-640D-305-144
M-456D-305-144
M-640D-256-144
M-456D-256-144
M-320D-256-144
M-456D-365-120
M-640D-305-120
M-456D-305-120
M-320D-305-120
M-456D-256-120
M-320D-256-120
M-228D-256-120
M-320D-213-120
M-228D-213-120
M-320D-305-100
M-320D-256-100
M-228D-256-100
M-228D-173-100
M-228D-246-86
M-228D-213-86
M-160D-213-86
M-160D-173-86
M-114D-143-86
M-228D-200-74
M-160D-200-74
M-228D-173-74
M-160D-173-74
M-114D-173-74
M-114D-143-74
M-114D-173-64
M-114D-143-64

15

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

MARK II UNITORQUE
PUMPING UNITS

OILFIELD PRODUCTS GROUP

Structural Data
Unit Size
M-1824D-427-216
M-1280D-427-216
M-912D-365-216
M-912D-305-216
M-1280D-427-192
M-912D-427-192
M-912D-305-192
M-640D-305-192
M-456D-305-192
M-912D-427-168
M-912D-365-168
M-640D-365-168
M-912D-305-168
M-640D-305-168
M-456D-305-168
M-912D-365-144
M-640D-365-144
M-456D-365-144
M-912D-305-144
M-640D-305-144
M-456D-305-144
M-640D-256-144
M-456D-256-144
M-320D-256-144
M-456D-365-120
M-640D-305-120
M-456D-305-120
M-320D-305-120
M-456D-256-120
M-320D-256-120
M-228D-256-120
M-320D-213-120
M-228D-213-120
M-320D-305-100
M-320D-256-100
M-228D-256-100
M-228D-173-100
M-228D-246-86
M-228D-213-86
M-160D-213-86
M-160D-173-86
M-114D-143-86
M-228D-200-74
M-160D-200-74
M-228D-173-74
M-160D-173-74
M-114D-173-74
M-114D-143-74
M-114D-173-64
M-114D-143-64

16

Polished Rod
Capacity (lbs.)

Stroke Lengths
(inches)

Walking
Beam

Crank Pin
Bearing

Samson Post
Bearing

Cross Yoke
Bearing

Wireline Hanger
(inches)

42,700
42,700
36,500
30,500
42,700
42,700
30,500
30,500
30,500
42,700
36,500
36,500
30,500
30,500
30,500
36,500
36,500
36,500
30,500
30,500
30,500
25,600
25,600
25,600
36,500
30,500
30,500
30,500
25,600
25,600
25,600
21,300
21,300
30,500
25,600
25,600
17,300
24,600
21,300
21,300
17,300
14,300
20,000
20,000
17,300
17,300
17,300
14,300
17,300
14,300

216, 192, 167

216, 192, 167
216, 192, 167
216, 192, 167
192, 168, 144
192, 168, 144
192, 168, 144
192, 168, 144
192, 168, 144
168, 150, 131
168, 149, 130
168, 149, 130
168, 149, 130
168, 149, 130
168, 149, 130
144, 128, 112
144, 128, 112
144, 128, 112
144, 128, 112
144, 128, 112
144, 128, 112
144, 128, 112
144, 128, 112
144, 128, 112
120, 104, 88
120, 104, 88
120, 104, 88
120, 104, 88
120, 104, 88
120, 104, 88
120, 104, 88
120, 104, 88
120, 104, 88
100, 84, 68
100, 84, 68
100, 84, 68
100, 84, 68
86, 72.4, 58.6
86, 72.4, 58.6
86, 72.4, 58.6
86, 72.4, 58.6
86, 74, 62
74, 60.4, 46.8
74, 60.4, 46.8
74, 60.4, 46.8
74, 60.4, 46.8
74, 60.4, 46.8
74, 60, 46
64, 52,40
64, 52, 40

W24 x 131
W24 x 131
W24 x 131
W24 x 131
W24 x 131
W24 x 131
W24 x 131
W24 x 131
W24 x 131
W24 x 131
W24 x 104
W24 x 104
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W21 x 68
W21 x 68
W21 x 68
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W21 x 68
W21 x 68
W21 x 68
W21 x 62
W21 x 62
W24 x 84
W21 x 68
W21 x 68
W16 x 57
W16 x 57
W16 x 45
W16 x 45
W16 x 45
W14 x 34
W16 x 45
W16 x 45
W16 x 45
W16 x 45
W16 x 45
W14 x 34
W14 x 34
W14 x 34

1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
2SE
2SE
2SE
2SE
2SE
2SE
1SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
4SF
2SE
2SE
2SE
2SE
3SF
4SF
3SF
4SF

P19
P19
P19
P19
P19
P19
P19
P19
P19
P19
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P16
P18
P18
P18
P16
P16
P16
P16
P13
P13
P16
P16
P13
P13
P13
P13
P13
P13

C232
C232
C232
C232
C232
C232
C232
C232
C232
C232
C22 C
C22 C
C22 C
C22 C
C22 C
C232
C232
C232
C22 C
C22 C
C22 C
C22 C
C22 C
C22 C
C232
C22 C
C22 C
C22 C
C22 C
C22 C
C20
C22 C
C19
C22 C
C22 C
C20
C19
C20N
C20N
C20N
C18N
C18N
C20N
C20N
C18N
C18N
C18N
C18N
C18N
C18N

1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 12 CTRS.
1.38 x 12 CTRS.
1.25 x 12 CTRS.
1.25 x 12 CTRS.
1.25 x 12 CTRS.
1.38 x 12 CTRS.
1.38 x 12 CTRS.
1.38 x 12 CTRS.
1.25 x 12 CTRS.
1.25 x 12 CTRS.
1.25 x 12 CTRS.
1.13 x 9 CTRS.
1.13 x 9 CTRS.
1.13 x 9 CTRS.
1.38 x 12 CTRS.
1.25 x 12 CTRS.
1.25 x 12 CTRS.
1.25 x 12 CTRS.
1.13 x 9 CTRS.
1.13 x 9 CTRS.
1.13 x 9 CTRS.
1.13 x 9 CTRS.
1.13 x 9 CTRS.
1.25 x 12 CTRS.
1.25 x 9 CTRS.
1.25 x 9 CTRS.
1.25 x 9 CTRS.
1.25 x 9 CTRS.
1.25 x 9 CTRS.
1.25 x 9 CTRS.
1.25 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.

Cranks
216130 MROA
216130 MROA
216130 MROA
216130 MROA
192130 MROA
192130 MROA
192130 MROA
192130 MROA
192130 MROA
168108 MROA
168108 MROA
168108 MROA
168108 MROA
168108 MROA
168108 MROA
144108 MROA
144108 MROA
144108 MROA
144108 MROA
144108 MROA
144108 MROA
144108 MROA
144108 MROA
144108 MROA
120108 MRA
120108 MRA
120108 MRA
120108 MRA
120108 MRA
120108 MRA
120108 MRA
120108 MRA
120108 MRA
100108 MRA
100108 MRA
100108 MRA
100108 MRA
8686 MRA
8686 MRA
8686 MRA
8686 MRA
8686 MRA
7486 MRA
7486 MRA
7486 MRA
7486 MRA
7486 MRA
7462 MRA
6462 MRA
6462 MRA

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

Counterbalance Data

Unit Size
Stroke
Structural Unbalance
Cranks

CBal., Cranks Only

4 No. 1RO Counterweights
4 No. 1S Aux. Weights
4 No. 2RO Counterweights
4 No. 2S Aux Weights
4 No. 3CRO Counterweights
4 No. 3BS Aux. Weights
4 No. 5ARO Counterweights
4 No. 5A Aux. Weights
4 No. 5CRO Counterweights
4 No. 5C Aux. Weights
4 NO. 6RO Counterweights
4 No. 6 Aux. Weights
8 No. 6 Aux. Weights
4 No. 7RO Counterweights
4 No. 7 Aux.Weights
8 No. 7 Aux. Weights

1,875
22,150
34,110
21,605
32,550
17,990
22,855
27,720
15,935
20,605
25,275
13,595
17,225
20,855
10,970
13,770
16,570
9,430
12,135
14,840
7,910
10,515
13,120
6,200
7,950
9,700
5,050
6,620
8,190
4,285
5,190
6,095
3,400
4,085
4,770

M-320D-205-100
100"
3,700 lbs.
100108 MRA

4,660
19,440
23,980
16,955
21,360
14,560
18,830
11,840
14,740
9,935
12,545
8,655
10,160
11,665
7,200
8,340
9,480

OILFIELD PRODUCTS GROUP

(shown in lbs., effective at polished rod with weights at maximum position, including structural unbalance.)

M-1280D-427-192
M-1824D-427-216 M-912DS-427-192
M-1280D-427-216 M-912D-305-192
M-912D-365-216 M-640D-305-192
M-912D-365-168
M-912D-305-216 M-456D-305-192 M-912DS-427-168 M-640D-365-168
216"
192"
168"
168"
7,450 lbs.
7,160 lbs.
6,820 lbs.
5,385 lbs.
216130 MROA
192130 MROA
168108 MROA
168108 MROA

CBal., Cranks Only

4 No. OOROL Counterweights
8 No. OOSL Axu. Weights
4 No. 130RO Counterweights
4 No. 130D Aux. Weights
4 No. OORO Counterweights
4 No. OOS Aux. Weights
8 No. OOS Aux. Weights
4 No. ORO Counterweights
4 No. OS Aux. Weights
8 No. OS Aux. Weights
4 No. OARO Counterweights
4 No. OAS Aux. Weights
8 No. OAS Aux. Weights
4 No. 1RO Counterweights
4 No. 1S Aux. Weights
8 No. 1S Aux. Weights
4 No. 2RO Counterweights
4 No. 2S Aux Weights
8 No. 2S Aux. Weights
4 No. 3CRO Counterweights
4 No. 3BS Aux. Weights
8 No. 3BS Aux. Weights
4 No. 5ARO Counterweights
4 No. 5A Aux. Weights
8 No. 5A Aux. Weights
4 No. 5CRO Counterweights
4 No. 5C Aux. Weights
8 No. 5C Aux. Weights
4 NO. 6RO Counterweights
4 No. 6 Aux. Weights
8 No. 6 Aux. Weights
4 No. 7RO Counterweights
4 No. 7 Aux.Weights
8 No. 7 Aux. Weights
Unit Size
Stroke
Structural Unbalance
Cranks

MARK II UNITORQUE
PUMPING UNITS

3,365
25,445
38,475
24,850
36,775
20,920
26,215
31,510
18,675
23,730
28,850
16,130
20,085
24,040
13,275
16,340
19,365
11,590
14,535
17,480
9,940
12,775
15,610
8,085
9,985
11,885
6,820
8,530
10,240
5,985
6,975
7,965
5,025
5,770
6,515

975
18,620
30,180
....
....
14,605
19,305
24,005
12,615
17,130
21,645
10,510
14,065
17,620
7,965
10,710
13,455
6,460
9,125
11,790
5,015
7,595
10,175
3,365
5,110
6,850
2,220
3,795
5,370
1,445
2,355
3,265
565
1,255
1,945

460
....
....
....
....
16,040
20,740
25,440
14,055
18,565
23,075
11,945
15,500
19,055
9,400
12,145
14,890
7,895
10,560
13,225
6,450
9,030
11,610
4,800
6,555
8,310
3,655
5,230
6,805
2,880
3,790
4,700
2,000
2,690
3,380

M-320D-256-100 M-228D-256-100 M-228D-173-100

100"
100"
100"
3,470 lbs.
3,285 lbs.
3,175 lbs.
100108 MRA
100108 MRA
100108 MRA

4,890
19,670
24,210
17,185
21,590
14,790
19,060
12,070
14,970
10,165
12,775
8,885
10,390
11,895
7,430
8,570
9,710

5,075
19,850
24,395
17,370
21,775
14,975
19,245
12,255
15,155
10,350
12,960
9,070
10,575
12,080
7,615
8,755
9,895

5,185
19,960
...
17,480
...
15,085
19,355
12,365
15,265
10,460
13,070
9,180
10,685
12,190
7,725
8,865
10,005

M-912D-305-168
M-640D-305-168
M-456D-305-168
168"
4,860 lbs.
168108 MROA

M-912D-365-144
M-640D-365-144
M-456D-365-144
144"
4,680 lbs.
144108 MROA

M-912D-305-144 M-640D-256-144
M-640D-305-144 M-456D-256-144
M-456D-305-144 M-320D-256-144
144"
144"
4,300 lbs.
4,010 lbs.
144108 MROA 144108 MROA

985
....
....
....
....
16,565
21,265
25,965
14,575
19,090
23,605
12,470
16,025
19,580
9,925
12,670
15,415
8,420
11,085
13,750
6,975
9,555
12,135
5,325
7,080
8,835
4,180
5,755
7,330
3,405
4,315
5,225
2,525
3,215
3,905

3,090
....
....
....
....
21,690
27,300
32,910
19,315
24,700
30,085
16,795
21,040
25,285
13,755
17,035
20,315
11,965
15,145
18,325
10,240
13,320
16,400
8,270
10,365
12,460
6,895
8,780
10,665
5,970
7,060
8,150
4,925
5,745
6,565

3,470
....
....
....
....
22,065
27,680
....
19,695
25,080
....
17,180
21,425
25,670
14,135
17,415
20,695
12,345
15,525
18,705
10,620
13,700
16,780
8,650
10,745
12,840
7,275
9,160
11,045
6,350
7,440
8,530
5,305
6,125
6,945

M-228D-246-86
86"
2,140 lbs.
8686 MRA

M-228D-213-86
M-160D-213-86
86"
2,040 lbs.
8686 MRA

M-160D-173-86
86"
1,930 lbs.
8686 MRA

2,715
15,600
19,565
13,480
17,335
11,495
15,280
9,190
11,890
7,495
9,860
6,435
7,840
9,245
5,095
6,160
7,225

2,815
15,700
19,665
13,580
17,435
11,595
15,380
9,290
11,990
7,595
9,955
6,535
7,940
...
5,195
6,260
...

2,925
15,810
19,775
13,690
17,545
11,705
15,490
9,400
12,100
7,705
10,070
6,645
8,050
...
5,305
6,370
...

3,760
....
....
....
....
22,355
....
....
19,985
....
....
17,470
21,710
....
14,425
17,705
....
12,635
15,815
*18,995
10,910
13,990
*17,070
8,940
11,035
*13,130
7,565
9,450
*11,335
6,640
7,730
8,820
5,595
6,415
7,235
M-114D-143-86
86"
1,535 lbs.
8662 MRA

1,525
9,525
11,980
8,270
10,690
7,200
9,640
5,880
7,650
4,770
6,375
4,080
5,045
6,010
3,180
3,925
4,680

* 8 Type S aux. weights will not clear belt cover on M-320D unit.

17

OILFIELD PRODUCTS GROUP

Counterbalance Data
Unit Size
Stroke
Structural Unbalance
Cranks

CBal., Cranks Only

4 No. ORO Counterweights
4 No. OS Aux. Weights
4 No. OARO Counterweights
4 No. OAS Aux. Weights
8 No. OAS Aux. Weights
4 No. 1RO Counterweights
4 No. 1S Aux. Weights
8 No. 1S Aux. Weights
4 No. 2RO Counterweights
4 No. 2S Aux Weights
8 No. 2S Aux. Weights
4 No. 3CRO Counterweights
4 No. 3BS Aux. Weights
8 No. 3BS Aux. Weights
4 No. 5ARO Counterweights
4 No. 5A Aux. Weights
8 No. 5A Aux. Weights
4 No. 5CRO Counterweights
4 No. 5C Aux. Weights
8 No. 5C Aux. Weights
4 NO. 6RO Counterweights
4 No. 6 Aux. Weights
8 No. 6 Aux. Weights
4 No. 7RO Counterweights
4 No. 7 Aux.Weights
8 No. 7 Aux. Weights

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

MARK II UNITORQUE
PUMPING UNITS

(shown in lbs., effective at polished rod with weights at maximum position, including structural unbalance.)

M-456D-365-120
120"
4,510 lbs.
120108 MRA

1,990
21,065
27,395
18,105
23,095
28,085
14,530
18,385
22,240
12,425
16,165
19,905
10,395
14,015
17,635
8,085
10,545
13,005
6,470
8,685
10,900
5,385
6,660
7,035
4,150
5,115
6,080

M-640D-305-120
M-456D-305-120
M-920D-305-120
120"
4,130 lbs.
120108 MRA

2,370
21,445
27,775
18,485
23,475
*28,465
14,910
18,765
*22,620
12,805
16,545
*20,285
10,775
14,395
*18,015
8,465
10,925
*13,385
6,845
9,060
*11,275
5,765
7,040
8,315
4,530
5,495
6,460

M-456D-256-120
120"
3,840 lbs.
120108 MRA

M-320D-256-120
120"
3,620 lbs.
120108 MRA

M-228D-256-120
120"
3,435 lbs.
120108 MRA

M-320D-213-120
120"
3,560 lbs.
120108 MRA

M-228D-213-120
120"
3,235 lbs.
120108 MRA

2,660
21,735
....
18,775
23,765
....
15,200
19,055
22,910
13,095
16,855
20,575
11,065
14,685
18,305
8,755
11,215
13,675
7,140
9,355
11,570
6,055
7,330
8,605
4,820
5,785
6,750

2,880
21,955
....
18,995
23,985
....
15,420
19,275
....
13,315
17,055
....
11,285
14,905
....
8,975
11,435
....
7,360
9,575
....
6,275
7,550
8,825
5,040
6,005
6,970

3,070
22,140
....
19,180
24,170
....
15,605
19,460
....
13,500
17,240
....
11,470
15,090
....
9,160
11,620
....
7,545
9,755
....
6,460
7,735
9,010
5,225
6,190
7,155

2,940
....
....
19,055
....
....
15,480
19,335
....
13,375
17,115
....
11,345
14,965
....
9,035
11,495
....
7,420
9,630
....
6,335
7,610
8,885
5,100
6,065
7,030

3,270
....
....
19,380
....
....
15,805
19,660
....
13,700
17,440
....
11,670
15,290
....
9,360
11,820
....
7,745
9,960
....
6,660
7,935
9,210
5,425
6,390
7,355

*8 type S aux. weights will not clear belt cover on M-320D unit

Unit Size
Stroke
Structural Unbalance
Cranks

CBal., Cranks Only

4 No. 2RO Counterweights
4 No. 2S Aux Weights
4 No. 3CRO Counterweights
4 No. 3BS Aux. Weights
4 No. 5ARO Counterweights
4 No. 5A Aux. Weights
4 No. 5CRO Counterweights
4 No. 5C Aux. Weights
4 NO. 6RO Counterweights
4 No. 6 Aux. Weights
8 No. 6 Aux. Weights
4 No. 7RO Counterweights
4 No. 7 Aux.Weights
8 No. 7 Aux. Weights

M-228D-200-74

M-228D-173-74
M-160D-200-74

M-160D-173-74

M-114D-173-74

M-114D-143-74

M-114D-173-64
M-114D-143-64

74"
1,960 lbs.
7486 MRA
3,685
15,990
....
13,720
18,045
11,085
14,080
9,145
11,845
7,935
9,540
11,145
6,400
7,625
8,850

74"
1,890 lbs.
7486 MRA
3,755
16,060
....
13,790
18,115
11,155
14,150
9,215
11,915
8,005
9,610
....
6,470
7,695
....

74"
1,860 lbs.
7486 MRA
3,785
16,090
....
13,820
18,145
11,185
14,180
9,245
11,945
8,035
9,640
....
6,500
7,725
....

74"
1,820 lbs.
7486 MRA
3,825
16,130
....
13,860
18,185
11,225
14,220
9,285
11,985
8,075
9,680
11,285
6,540
7,765
8,900

74"
1,440 lbs.
7462 MRA
2,230
9,890
12,630
8,670
11,445
7,170
9,180
5,910
7,730
5,130
6,225
7,320
4,105
4,950
5,795

64"
1,420 lbs.
6462 MRA
2,845
11,580
14,710
10,190
13,355
8,485
10,775
7,045
9,125
6,150
7,400
8,650
4,985
5,950
6,915

EXAMPLE: A M-456D-365-120 with 4 No. ORO Counterweights and 4 No. OS Auxiliary Weights would have a maximum counterbalance effect of 27,395 lbs. in the 120" stroke. (See other
example, page 10). Structural Unbalance with a negative () sign indicates a walking beam assembly that is heavy on the well end.

18

AIR BALANCED
PUMPING UNITS

The utilization of compressed air instead of heavy cast iron counterweights

allows more accurate fingertip control of counterbalance. As a result, the
weight of the unit is greatly reduced, significantly lowering transportation
and installation costs. Air Balanced units have a distinct advantage in the
larger sizes with long strokes, where space and weight restrictions prohibit
the use of conventional crank balanced units.

OILFIELD PRODUCTS GROUP

AIR BALANCED
PUMPING UNITS

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

Air Balanced Pumping Units provide:

Perfect counterbalance with finger-tip control.
Lower installation cost.
Compact and portable; ideal for well testing.
Small size and lighter weight make unit ideal
for export.
Stroke lengths to 20 feet for high volume production
from great depths.
These are some of the outstanding advantages of
Lufkin Air Balanced Pumping Units. These units
employ compressed air to counterbalance the well
load rather than beam weights or crank weights. The
air system has been so simplified that the only continuously operating parts are the balance cylinder
and piston. The reservoir capacity of the cylinder is
enlarged by a steel receiver which moves with the
cylinder as a unit.
On engine-driven units, when the system is in need
of air, an automatic regulator engages an air operated clutch (driven by one belt from the unit sheave)
and replaces any lost air. The operator sets the regulator, initially, at a pressure sufficient to counterbalance the well load. Then, this pressure is maintained
automatically. Should the load change appreciably, a
slight adjustment of the regulator will restore perfect
counterbalance.
A safety shut-off switch is available, which will
ground out the engine, or shut off the motor, if pressure should exceed a preset figure or fall below a
minimum pre-set figure.
For units pumping with electricity, a separate motordriven compressor assembly is standard equipment.
Lufkin Air Balanced Units are approximately 35%
shorter and 40% lighter than crank-type units,
which makes them ideal for use as portable or test
units, and for installation on piling or superstructures.
Since changing counterbalance effect is a matter
of adjusting a valve, air balanced units are ideal for
use in testing wells.
All of the ruggedness and simplicity of conventional
Lufkin Pumping Units are incorporated in the design
of Lufkin's Air Balanced Pumping Units.

20

A Lufkin Air Balanced Unit with electric motor drive.

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

AIR BALANCED
PUMPING UNITS

OILFIELD PRODUCTS GROUP

B
AC
A

H
I
C
V

MAX.

MIN.

MULTI
CYLINDER
ENGINE

BOTTOM OF STROKE

AB

L
N
W
M
X

E
F

Dimensional Data
Unit Size

A-2560D-470-240
A-1824D-470-240
A-1824D-427-216
A-1824D-427-192
A-1280D-470-240
A-1280D-427-216
A-1280D-427-192
A-1280D-305-168
A-912D-470-240
A-912D-427-216
A-912D-427-192
A-912D-305-168
A-912D-427-144
A-640D-305-168
A-640D-427-144
A-640D-305-144
A-640D-365-120
A-456D-305-144
A-456D-365-120
A-456D-256-120
A-320D-256-120
A-320D-305-100
A-228D-173-100
A-228D-246-86
A-160D-200-74
A-114D-173-64

134.5
134.5
121.5
121.5
134.5
121.5
121.5
88.0
134.5
121.5
121.5
88.0
88.0
88.0
88.0
77.0
77.0
77.0
77.0
69.0
70.0
70.0
56.0
56.0
50.0
48.0

(inches)
B

AB

AC

336
336
308
276
336
308
276
231
336
308
276
231
200
231
200
208
175
208
175
184
184
155
151
131
120
115

303.5
303.5
282.0
252.0
303.5
282.0
252.0
244.0
303.5
282.0
252.0
244.0
214.0
244.0
214.0
214.0
187.0
214.0
187.0
187.0
187.0
160.0
149.0
149.0
141.0
132.0

*
*
264.88
232.88
*
264.88
232.88
178.50
*
264.88
232.88
178.50
147.50
178.50
147.50
155.25
131.75
155.25
131.75
143.75
135.25
120.25
99.25
99.25
95.00
89.50

379.25
373.25
354.88
322.88
379.25
354.88
322.88
264.50
379.25
354.88
322.88
264.50
233.50
264.50
233.50
241.25
217.75
241.25
217.75
229.75
227.25
212.25
177.00
177.00
174.75
173.75

558.5
558.5
516.0
464.0
558.5
516.0
464.0
426.0
558.5
516.0
464.0
426.0
375.5
426.0
375.5
372.0
324.0
372.0
324.0
324.0
324.0
280.0
267.0
255.0
231.0
212.0

19.38
19.38
20.63
19.38
19.38
20.63
19.38
17.63
19.38
20.63
19.38
17.63
19.38
17.63
19.38
21.13
22.50
21.13
22.50
17.25
17.25
25.50
15.00
18.13
18.88
20.38

54.00
54.00
56.13
50.13
54.00
56.13
50.13
65.25
54.00
56.00
50.00
65.25
56.00
65.25
56.00
54.88
50.00
54.88
50.00
56.13
56.00
40.38
40.50
50.75
49.50
50.38

106.00
96.00
95.50
95.50
96.00
95.50
95.50
95.50
96.00
95.50
95.50
95.50
95.50
95.50
95.50
91.00
91.00
91.00
91.00
85.50
85.50
85.50
73.50
73.50
73.50
63.75

21.00
21.00
21.00
21.00
21.00
21.00
21.00
16.13
21.00
21.00
21.00
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
16.13
9.75
9.75

51.69
51.69
48.00
48.00
51.69
48.00
48.00
59.00
51.69
48.00
48.00
59.00
59.00
59.00
59.00
57.00
47.50
57.00
47.50
53.00
53.00
39.00
56.00
36.00
35.50
36.00

70.00
58.88
58.88
58.88
52.50
52.50
52.50
52.50
48.50
48.50
48.50
48.50
48.50
41.50
41.50
41.50
41.50
38.38
38.38
38.38
34.00
34.00
30.00
30.00
26.00
24.00

100.38
111.50
96.00
96.00
117.88
102.38
102.38
71.75
121.88
109.38
109.38
75.75
75.75
83.75
83.75
71.00
71.00
74.13
74.13
74.13
71.25
71.25
47.00
47.00
53.75
62.00

46.50
46.50
46.50
46.50
46.50
46.50
46.50
40.50
46.50
46.50
46.50
40.50
40.50
40.50
40.50
40.50
40.50
40.50
40.50
40.50
40.50
40.50
40.50
40.50
48.00
46.00

66.25
50.25
50.25
50.25
50.25
50.25
50.25
50.25
50.00
50.00
50.00
50.00
50.00
46.75
46.75
46.75
46.75
46.75
46.75
46.75
43.25
43.25
37.25
37.25
32.00
25.25

130.63
115.63
115.63
115.63
109.63
109.63
109.63
107.13
102.63
102.63
102.63
100.13
100.13
100.13
100.13
100.13
100.13
100.13
100.13
100.13
87.38
87.38
80.38
80.38
69.88
66.88

39.13
33.13
33.13
33.13
33.13
33.13
33.13
36.38
33.13
27.13
27.13
30.38
30.38
28.38
28.38
28.38
28.38
28.38
28.38
28.38
30.13
30.13
29.13
29.13
15.88
11.88

233.5
233.5
171.5
171.5
233.5
171.5
171.5
131.5
233.5
171.5
171.5
131.5
131.5
131.5
131.5
118.0
118.0
118.0
118.0
107.0
107.0
107.0
87.5
87.5
77.5
72.5

* Portable base is standard. One piece and portable bases available on all units.
NOTE: Do not use above dimensions for foundation. Request foundation plan.

21

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

AIR BALANCED
PUMPING UNITS

OILFIELD PRODUCTS GROUP

In 1953 Lufkin began manufacturing air

balanced pumping units, which use
compressed air instead of heavy cast
iron counterweights for counterbalance.

A
C

P
H

R
G
I

API Geometry Dimensions

Unit Size

A-2560D-470-240
A-1824D-470-240
A-1280D-470-240
A-912D-470-240
A-1824D-427-216
A-1280D-427-216
A-912D-427-216
A-1824D-427-192
A-1280D-427-192
A-912D-427-192
A-1280D-305-168
A-912D-305-168
A-640D-305-168
A-912D-427-144
A-640D-427-144
A-640D-305-144
A-456D-305-144
A-640D-365-120
A-456D-365-120
A-456D-256-120
A-320D-256-120
A-320D-305-100
A-228D-173-100
A-228D-246-86
A-160D-200-74
A-114D-173-64

22

(inches)

R1, R2, R3

336
336
336
336
308
308
308
276
276
276
231
231
231
200
200
208
208
175
175
184
184
155
151
131
120
115

134.5
134.5
134.5
134.5
121.5
121.5
121.5
121.5
121.5
121.5
88.0
88.0
88.0
88.0
88.0
77.0
77.0
77.0
77.0
69.0
70.0
70.0
56.0
56.0
50.0
48.0

130.0
130.0
130.0
130.0
114.5
114.5
117.5
114.5
114.5
117.5
84.0
84.0
85.0
84.0
85.0
74.5
74.5
74.5
74.5
66.0
68.0
68.0
54.0
54.0
48.0
46.5

261.5
267.5
267.5
267.5
246.0
246.0
252.0
216.0
216.0
222.0
208.0
214.0
216.0
184.0
186.0
186.0
186.0
159.0
159.0
159.0
159.0
132.0
122.0
122.0
114.0
114.0

303.5
303.5
303.5
303.5
282.0
282.0
282.0
252.0
252.0
252.0
244.0
244.0
244.0
214.0
214.0
214.0
214.0
187.0
187.0
187.0
187.0
160.0
149.0
149.0
141.0
132.0

42
36
36
36
36
36
30
36
36
30
36
30
28
30
28
28
28
28
28
28
28
28
27
27
27
18

47, 39.44
47, 39.44
47, 39.44
47, 39.44
41.75, 36.63, 32
41.75, 36.63, 32
41.75, 36.63, 32
41.75, 36.63, 32
41.75, 36.63, 32
41.75, 36.63, 32
31.25, 26.19, 22
31.25, 26.19, 22
31.25, 26.19, 22
31.25, 26.19, 22
31.25, 26.19, 22
26.19, 22, 18.94
26.19, 22, 18.94
26.19, 22, 18.94
26.19, 22, 18.94
22, 18.94, 16.31
22.38, 19.38, 16.75
22.38, 19.38, 16.75
18.25, 15.75, 13.75
18.25, 15.75, 13.75
15.25, 13.25, 11.25
13.31, 11.25

114.80
114.80
114.80
114.80
92.00
92.00
92.00
102.80
102.80
102.80
75.54
75.54
75.54
87.30
87.30
64.16
64.16
76.20
76.20
55.25
55.25
65.60
45.49
52.50
50.70
31.70

150.00
150.00
150.00
150.00
140.00
140.00
140.00
112.00
112.00
112.00
112.81
112.81
112.81
90.00
90.00
95.16
95.16
88.00
88.00
77.00
77.00
76.00
85.75
73.00
63.00
63.00

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

AIR BALANCED
PUMPING UNITS

OILFIELD PRODUCTS GROUP

Structural Data
Unit Size

A-2560D-470-240
A-1824D-470-240
A-1824D-427-216
A-1824D-427-192
A-1280D-470-240
A-1280D-427-216
A-1280D-427-192
A-1280D-305-168
A-912D-470-240
A-912D-427-216
A-912D-427-192
A-912D-305-168
A-912D-427-144
A-640D-305-168
A-640D-427-144
A-640D-305-144
A-640D-365-120
A-456D-305-144
A-456D-365-120
A-456D-256-120
A-320D-256-120
A-320D-305-100
A-228D-173-100
A-228D-246-86
A-160D-200-74
A-114D-173-64

Polish Rod Stroke Lengths Piston Dia.

Capacity (lbs.)
(inches)
(inches)

47,000
47,000
42,700
42,700
47,000
42,700
42,700
30,500
47,000
42,700
42,700
30,500
42,700
30,500
42,700
30,500
36,500
30,500
36,500
25,600
25,600
30,500
17,300
24,600
20,000
17,300

240, 200
240, 200
216, 190, 162
192, 168, 144
240, 200
216, 190, 162
192, 168, 144
168, 141, 118
240, 200
216, 190, 162
192, 168, 144
168, 141, 118
144, 120, 100
168, 141, 118
144, 120, 100
144, 120, 100
120, 100, 86
144, 120, 100
120, 100, 86
120, 104, 90
120, 104, 90
100, 86, 74
100, 86, 74
86, 74, 64
74, 64, 54
64, 54

14.5
14.5
14.5
14.5
14.5
14.5
14.5
13.0
14.5
14.5
14.5
13.0
13.0
13.0
13.0
12.0
12.0
12.0
12.0
11.0
11.0
11.0
10.0
10.0
10.0
8.0

Walking
Beam

W36 x 245
W36 x 245
W33 x 201
W33 x 201
W36 x 245
W33 x 201
W33 x 201
W27 x 161
W36 x 245
W33 x 201
W33 x 201
W27 x 146
W27 x 161
W27 x 146
W27 x 161
W27 x 146
W27 x 146
W27 x 146
W27 x 146
W24 x 104
W24 x 104
W24 x 104
W21 x 101
W21 x 101
W18 x 76
W16 x 67

Wireline Hanger *Floating Hub Sheave

(inches)
Sizes, P.D. (inches)

1.38 x 16 CTRS.
68 (16D)
1.38 x 16 CTRS.
40, 46, 51, 68 (11D)
1.38 x 16 CTRS.
40, 46, 51, 68 (11D)
1.38 x 16 CTRS.
40, 46, 51, 68 (11D)
1.38 x 16 CTRS.
40, 46, 51, 68 (10D)
1.38 x 16 CTRS.
40, 46, 51, 68 (10D)
1.38 x 16 CTRS.
40, 46, 51, 68 (10D)
1.38 x 16 CTRS.
40, 46, 51, 68 (10D)
1.38 x 16 CTRS.
28, 34, 40, 46, 51 (8D)
1.38 x 16 CTRS.
28, 34, 40, 46, 51 (8D)
1.38 x 16 CTRS.
28, 34, 40, 46, 51 (8D)
1.38 x 16 CTRS.
28, 34, 40, 46, 51 (7D)
1.38 x 16 CTRS.
28, 34, 40, 46, 51 (7D)
1.38 x 16 CTRS.
28, 34, 40, 46, 51 (6D)
1.38 x 16 CTRS.
28, 34, 40, 46, 51 (6D)
1.25 x 12 CTRS.
28, 34, 40, 46, 51 (6D)
1.25 x 12 CTRS.
28, 34, 40, 46, 51 (6D)
1.25 x 12 CTRS. 28,34,40,46,51 (6D or 8C)
1.25 x 12 CTRS. 28,34,40,46,51 (6D or 8C)
1.25 x 12 CTRS. 28,34,40,46,51 (6D or 8C)
1.25 x 12 CTRS. 25,30,36,42,47.25 (6Cor5D)
1.25 x 12 CTRS. 25,30,36,42,47.25 (6Cor5D)
1.13 x 12 CTRS. 24.25,30,36,41.25 (5C or4D)
1.13 x 12 CTRS. 24.25,30,36,41.25 (5C or4D)
1.13 x 12 CTRS. 24.25,29.25,33.25,38 (4Cor3D)
1 x 9 CTRS.
19.25, 24, 33.25 (3C)

Crank Pin
Bearing

Equalizer
Bearing

Samson Post
Bearing

Air Tank
Bearing

OT
OT
OT
OT
OT
OT
OT
OT
OT
OT
OT
OT
OT
OT
OT
OT
OT
OT
OT
OT
2T
2T
2T
2T
3TA
3TA

E32
E26
E26
E26
E26
E26
E26
E26
E26
E26
E26
E26
E26
E26
E26
E26
E26
E26
E26
E26
E22
E22
E22
E22
E19
E18

P19
P19
P19
P19
P19
P19
P19
P19
P19
P19
P19
P19
P19
P19
P19
P18
P18
P18
P18
P18
P18
P18
P17
P17
P16
P16

334
334
334
334
334
334
334
232
334
334
334
232
232
232
232
326
326
326
326
324
324
324
322
322
322
318

* Standard sheave sizes shown are floating hub sheaves for clutch driven compressors; largest size shown is maximum available. For electric motor driven compressors, use solid type reducer
sheave as shown in crank balance unit specifications.

23

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

AIR BALANCED
PUMPING UNITS

OILFIELD PRODUCTS GROUP

Counterbalance Data (effective counterbalance in pounds based on average pressure.)

*Average Pressure, PSIG
Unit Size

A-2560D-470-240
A-1824D-470-240
A-1280D-470-240
A-912D-470-240
A-1824D-427-216
A-1280D-427-216
A-912D-427-216
A-1824D-427-192
A-1280D-427-192
A-912D-427-192
A-1280D-305-168
A-912D-305-168
A-640D-305-168
A-912D-427-144
A-640D-427-144
A-640D-305-144
A-456D-305-144
A-640D-365-120
A-456D-365-120
A-456D-256-120
A-320D-256-120
A-320D-305-100
A-228D-173-100
A-228D-246-86
A-160D-200-74
A-114D-173-64

150

175

200

225

250

275

300

325

350

375

400

410

2,870

5,740

8,610

11,480

14,350

17,220

20,090

22,960

25,830

28,700

29,850

920

3,220

5,520

7,820

10,120

12,420

14,720

17,020

19,320

21,620

23,920

24,830

3,905

6,475

9,045

11,615

14,185

16,755

19,325

21,895

24,465

27,035

29,605

30,635

2,810

4,700

6,585

8,475

10,365

12,250

14,140

16,030

17,915

19,805

21,695

22,450

5,240

7,420

9,605

11,785

13,970

16,150

18,335

20,515

22,700

24,880

27,065

27,935

3,520

5,125

6,725

8,330

9,935

11,540

13,145

14,745

16,350

17,955

19,560

20,200

4,725

6,630

8,535

10,440

12,345

14,250

16,155

18,060

19,965

21,870

23,775

24,535

4,035

5,415

6,795

8,175

9,560

10,940

12,320

13,700

15,085

16,465

17,845

18,400

4,855
2,925
4,045
4,410
2,760

6,495
4,060
5,355
5,680
3,550

8,135
5,195
6,670
6,945
4,345

9,775
6,335
7,980
8,215
5,135

11,415
7,470
9,295
9,480
5,930

13,055
8,610
10,605
10,750
6,720

14,695
9,745
11,920
12,015
7,515

16,335
10,885
13,230
13,285
8,305

17,975
12,020
14,545
14,550
9,100

19,615
13,160
15,855
15,820
9,890

21,255
14,295
17,170
17,085
10,685

21,910
14,750
17,695
17,595
11,000

* Pressure shown is average pressure between maximum and minimum and occurs at approximately beam horizontal position. For counterbalance at other pressures use direct interpolation.

24

REVERSE MARK
PUMPING UNITS

The Lufkin Reverse Mark or RM Series Pumping Unit offers the customer
an improved alternative to the conventional type geometry. Although similar
in appearance to the Lufkin Conventional Pumping Unit, the RM unit geometry
can reduce the torque and power requirements on many pumping applications. In some instances a smaller reducer and prime mover can be used.

OILFIELD PRODUCTS GROUP

MAX.

MIN.

VV

UU

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

REVERSE MARK
PUMPING UNITS

INSIDE OF
AUX. WT.

AA

DRIVE

G
B

MAX.

MIN.

MIN.

T
C

MULTICYLINDER
ENGINE

BOTTOM OF STROKE

AB
L

J
N

M
R

Dimensional Data

(inches)

Unit Size

163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
163.00
142.00
142.00

228.50
228.50
200.00
200.00
228.50
228.50
200.00
200.00
228.50
228.50
228.50
200.00
200.00
200.00
171.50
171.50
171.50
228.50
200.00
200.00
171.50
171.50
171.50
171.50
144.50
144.50

253.00
253.00
253.00
253.00
253.00
253.00
253.00
253.00
257.88
257.88
257.88
257.88
257.88
257.88
257.88
257.88
257.88
257.88
257.88
257.88
257.88
257.88
257.88
257.88
222.00
222.00

277.50
277.50
277.50
277.50
277.50
277.50
277.50
277.50
273.50
273.50
273.50
273.50
273.50
273.50
273.50
273.50
273.50
270.00
270.00
270.00
273.50
270.00
270.00
270.00
241.00
241.00

410.50
410.50
410.50
410.50
410.50
410.50
410.50
410.50
406.50
406.50
406.50
406.50
406.50
406.50
406.50
406.50
406.50
403.00
403.00
403.00
406.50
403.00
403.00
403.00
359.00
359.00

61.63
61.63
61.63
61.63
61.63
61.63
61.63
61.63
58.00
58.00
58.00
58.00
58.00
58.00
58.00
58.00
58.00
54.25
54.25
54.25
54.25
54.25
54.25
54.25
54.25
54.25

446.00
446.00
425.00
425.00
446.00
446.00
425.00
425.00
446.00
446.00
446.00
425.00
425.00
425.00
404.00
404.00
404.00
446.00
425.00
425.00
404.00
404.00
404.00
404.00
346.00
346.00

19.00
19.00
35.38
35.38
19.00
19.00
35.38
35.38
19.00
19.00
19.00
35.38
35.38
35.38
41.50
41.50
41.50
19.00
35.38
35.38
41.50
41.50
41.50
41.50
38.38
38.38

110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
95.00
95.00

52.38
52.38
60.13
60.13
52.38
52.38
60.13
60.13
52.38
52.38
52.38
60.13
60.13
60.13
78.13
78.13
78.13
52.38
60.13
60.13
78.13
78.13
78.13
78.13
69.38
69.38

86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
86.00
70.00
70.00

RM-1824D-427-192
RM-1824D-365-192
RM-1824D-427-168
RM-1824D-365-168
RM-1280D-427-192
RM-1280D-365-192
RM-1280D-427-168
RM-1280D-365-168
RM-912D-427-192
RM-912D-365-192
RM-912D-305-192
RM-912D-427-168
RM-912D-365-168
RM-912D-305-168
RM-912D-427-144
RM-912D-365-144
RM-912D-305-144
RM-640D-305-192
RM-640D-365-168
RM-640D-305-168
RM-640D-427-144
RM-640D-365-144
RM-640D-305-144
RM-640D-256-144
RM-640D-305-120
RM-640D-256-120

NOTE: Do not use above dimensions for foundation. Request foundation plan.
Standard API models shown, other models available on request.

26

21.00 179.00
21.00 179.00
21.00 150.50
21.00 150.50
21.00 179.00
21.00 179.00
21.00 150.50
21.00 150.50
16.13 179.00
16.13 179.00
16.13 179.00
16.13 150.50
16.13 150.50
16.13 150.50
16.13 122.00
16.13 122.00
16.13 122.00
16.13 179.00
16.13 150.50
16.13 150.50
16.13 122.00
16.13 122.00
16.13 122.00
16.13 122.00
15.88 103.00
15.88 103.00

W
X

AA

AB

UU

VV

58.88
58.88
58.88
58.88
52.50
52.50
52.50
52.50
48.50
48.50
48.50
48.50
48.50
48.50
48.50
48.50
48.50
41.50
41.50
41.50
41.50
41.50
41.50
41.50
41.50
41.50

83.00
83.00
83.00
83.00
83.00
83.00
83.00
83.00
87.00
87.00
87.00
87.00
87.00
87.00
87.00
87.00
87.00
90.50
90.50
90.50
90.50
90.50
90.50
90.50
76.00
76.00

52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00
52.00

50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75
46.75

106.00
106.00
106.00
106.00
106.00
106.00
106.00
106.00
101.00
101.00
101.00
101.00
101.00
101.00
101.00
101.00
101.00
101.00
101.00
101.00
101.00
101.00
101.00
101.00
98.50
98.50

51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75
51.75

90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
90.88
75.88
75.88

12.50
12.50
12.50
12.50
12.50
12.50
12.50
12.50
16.50
16.50
16.50
16.50
16.50
16.50
16.50
16.50
16.50
23.50
23.50
23.50
23.50
23.50
23.50
23.50
26.75
26.75

57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
57.00
37.75
37.75

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

REVERSE MARK
PUMPING UNITS

Dimensional Data

(inches)

Unit Size

142.00
142.00
142.00
142.00
142.00
142.00
142.00
142.00
142.00
142.00
142.00
142.00
142.00
127.00
142.00
142.00
127.00
127.00
127.00
127.00
127.00
127.00

202.00
173.00
173.00
173.00
144.50
144.50
144.50
173.00
144.50
144.50
144.50
120.50
120.50
103.50
144.50
120.50
120.00
120.00
103.50
103.50
89.00
89.00

222.00
222.00
222.00
222.00
222.00
222.00
222.00
222.00
222.00
222.00
222.00
222.00
222.00
190.13
222.00
222.00
190.13
190.13
190.13
190.13
190.13
190.13

241.00
241.00
241.00
241.00
241.00
241.00
241.00
235.50
235.50
235.50
235.50
235.50
235.50
216.50
228.50
228.50
209.50
209.50
209.50
209.50
209.50
209.50

359.00
359.00
359.00
359.00
359.00
359.00
359.00
359.50
359.50
359.50
359.50
359.50
359.50
323.50
359.00
359.00
323.00
323.00
323.00
323.00
323.00
323.00

51.38
51.38
51.38
51.38
51.38
51.38
51.38
44.75
44.75
44.75
44.75
44.75
44.75
44.75
38.63
38.63
39.13
39.13
39.13
39.13
39.13
39.13

388.00
368.00
368.00
368.00
346.00
346.00
346.00
368.00
346.00
346.00
346.00
328.00
328.00
283.00
346.00
328.00
295.00
295.00
283.00
283.00
273.00
273.00

19.38
23.50
23.50
23.50
38.38
38.38
38.38
23.50
38.38
38.38
38.38
59.00
59.00
36.88
38.38
59.00
23.00
23.00
36.88
36.88
46.88
46.88

95.00
95.00
95.00
95.00
95.00
95.00
95.00
95.00
95.00
95.00
95.00
95.00
95.00
78.00
95.00
95.00
78.00
78.00
78.00
78.00
78.00
78.00

40.13
60.13
60.13
60.13
69.38
69.38
69.38
60.13
69.38
69.38
69.38
69.38
69.38
73.63
69.38
69.38
73.75
73.75
73.63
73.63
77.63
77.63

76.00
76.00
76.00
76.00
70.00
70.00
70.00
70.00
70.00
70.00
70.00
70.00
70.00
70.00
70.00
70.00
70.00
70.00
70.00
70.00
70.00
70.00

RM-456D-305-168
RM-456D-365-144
RM-456D-305-144
RM-456D-256-144
RM-456D-365-120
RM-456D-305-120
RM-456D-256-120
RM-320D-256-144
RM-320D-305-120
RM-320D-256-120
RM-320D-213-120
RM-320D-305-100
RM-320D-256-100
RM-320D-246-86
RM-228D-213-120
RM-228D-256-100
RM-228D-213-100
RM-228D-173-100
RM-228D-246-86
RM-228D-213-86
RM-228D-200-74
RM-228D-173-74

OILFIELD PRODUCTS GROUP

15.88 160.50
15.88 131.50
15.88 131.50
15.88 131.50
15.88 103.00
15.88 103.00
15.88 103.00
15.88 131.50
15.88 103.00
15.88 103.00
15.88 103.00
15.88 79.00
15.88 79.00
15.88 62.00
15.88 103.00
15.88 79.00
15.88 78.50
15.88 78.50
15.88 62.00
15.88 62.00
15.88 47.50
15.88 47.50

AA

AB

UU

VV

38.38
38.38
38.38
38.38
38.38
38.38
38.38
34.00
34.00
34.00
34.00
34.00
34.00
34.00
30.00
30.00
30.00
30.00
30.00
30.00
30.00
30.00

79.00
79.00
79.00
79.00
79.00
79.00
79.00
83.50
83.50
83.50
83.50
83.50
83.50
66.50
87.00
87.00
70.00
70.00
70.00
70.00
70.00
70.00

52.00
52.00
52.00
52.00
52.00
52.00
52.00
53.00
53.00
53.00
53.00
53.00
53.00
53.00
53.00
53.00
53.00
53.00
53.00
53.00
53.00
53.00

46.75
46.75
46.75
46.75
46.75
46.75
46.75
43.00
43.00
43.00
43.00
43.00
43.00
43.00
37.00
37.00
37.00
37.00
37.00
37.00
37.00
37.00

98.50
98.50
98.50
98.50
98.50
98.50
98.50
85.50
85.50
85.50
85.50
85.50
85.50
85.50
78.50
78.50
78.50
78.50
78.50
78.50
78.50
78.50

51.75
51.75
51.75
51.75
51.75
51.75
51.75
54.00
54.00
54.00
54.00
54.00
54.00
37.13
54.00
54.00
37.13
37.13
37.13
37.13
37.13
37.13

75.88
75.88
75.88
75.88
75.88
75.88
75.88
79.00
79.00
79.00
79.00
79.00
79.00
62.13
79.00
79.00
62.13
62.13
62.13
62.13
62.13
62.13

26.13
26.13
26.13
26.13
26.13
26.13
26.13
31.00
31.00
31.00
31.00
31.00
31.00
30.00
28.00
28.00
27.88
27.88
27.88
27.88
27.88
27.88

37.75
37.75
37.75
37.75
37.75
37.75
37.75
33.25
33.25
33.25
33.25
33.25
33.25
33.25
33.25
33.25
33.25
33.25
33.25
33.25
33.25
33.25

Structural Data
Unit Size
RM-1824D-427-192
RM-1280D-427-192
RM-912D-427-192
RM-1824D-365-192
RM-1280D-365-192
RM-912D-365-192
RM-912D-305-192
RM-640D-305-192
RM-1824D-427-168
RM-1280D-427-168
RM-912D-427-168
RM-1824D-365-168
RM-1280D-365-168
RM-912D-365-168
RM-640D-365-168
RM-912D-305-168
RM-640D-305-168
RM-456D-305-168
RM-912D-427-144
RM-640D-427-144
RM-912D-365-144
RM-640D-365-144
RM-456D-365-144
RM-912D-305-144
RM-640D-305-144
RM-456D-305-144
RM-640D-256-144
RM-456D-256-144
RM-320D-256-144
RM-456D-365-120
RM-640D-305-120
RM-456D-305-120
RM-320D-305-120
RM-640D-256-120
RM-456D-256-120
RM-320D-256-120
RM-320D-213-120
RM-228D-213-120
RM-320D-305-100
RM-320D-256-100
RM-228D-256-100
RM-228D-213-100
RM-228D-173-100
RM-320D-246-86
RM-228D-246-86
RM-228D-213-86
RM-228D-200-74
RM-228D-173-74

Polished Rod
Capacity (lbs.)

Stroke Lengths
(inches)

Walking
Beam

Wireline Hanger
(inches)

Cranks

Crank Pin
Bearing

Equalizer
Bearing

Center
Bearing

42,700
42,700
42,700
36,500
36,500
36,500
30,500
30,500
42,700
42,700
42,700
36,500
36,500
36,500
36,500
30,500
30,500
30,500
42,700
42,700
36,500
36,500
36,500
30,500
30,500
30,500
25,600
25,600
25,600
36,500
30,500
30,500
30,500
25,600
25,600
25,600
21,300
21,300
30,500
25,600
25,600
21,300
17,300
24,600
24,600
21,300
20,000
17,300

192, 158, 127

192, 158, 127
192, 158, 127
192, 158, 127
192, 158, 127
192, 158, 127
192, 158, 127
192, 158, 127
168, 139, 111
168, 139, 111
168, 139, 111
168, 139, 111
168, 139, 111
168, 139, 111
168, 139, 111
168, 139, 111
168, 139, 111
168, 139, 112
144, 119, 95
144, 119, 95
144, 119, 95
144, 119, 95
144, 119, 96
144, 119, 95
144, 119, 95
144, 119, 96
144, 119, 95
144, 119, 96
144, 119, 96
120, 100, 80
120, 100, 80
120, 100, 80
120, 100, 80
120, 100, 80
120, 100, 80
120, 100, 80
120, 100, 80
120, 100, 80
100, 83, 67
100, 83, 67
100, 83, 67
100, 84, 69
100, 84, 69
86, 72, 59
86, 72, 59
86, 72, 59
74, 62, 51
74, 62, 51

W36 x 260
W36 x 260
W36 x 260
W36 x 245
W36 x 245
W36 x 245
W33 x 221
W33 x 221
W36 x 245
W36 x 245
W36 x 245
W33 x 221
W33 x 221
W33 x 221
W33 x 221
W33 x 201
W33 x 201
W33 x 201
W33 x 201
W33 x 201
W33 x 201
W33 x 201
W33 x 201
W30 x 173
W30 x 173
W30 x 173
W30 x 173
W30 x 173
W30 x 173
W30 x 173
W27 x 146
W27 x 146
W27 x 146
W27 x 146
W27 x 146
W27 x 146
W27 x 146
W27 x 146
W27 x 146
W27 x 146
W27 x 146
W24 x 117
W24 x 104
W24 x 117
W24 x 117
W24 x 104
W24 x 94
W24 x 84

1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-1/4 x 16 CTRS.
1-1/4 x 16 CTRS.
1-1/4 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-3/8 x 16 CTRS.
1-1/4 x 16 CTRS.
1-1/4 x 16 CTRS.
1-1/4 x 16 CTRS.
1-1/4 x 16 CTRS.
1-1/4 x 16 CTRS.
1-1/4 x 16 CTRS.
1-3/8 x 12 CTRS.
1-1/4 x 12 CTRS.
1-1/4 x 12 CTRS.
1-1/4 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/4 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1-1/8 x 12 CTRS.
1 x 9 CTRS.
1 x 9 CTRS.

90110 RMA
90110 RMA
90110 RMA
90110 RMA
90110 RMA
90110 RMA
90110 RMA
90110 RMA
90110 RMA
90110 RMA
90110 RMA
90110 RMA
90110 RMA
90110 RMA
90110 RMA
90110 RMA
90110 RMA
7895 RM
90110 RMA
90110 RMA
90110 RMA
90110 RMA
7895 RM
90110 RMA
90110 RMA
7895 RM
90110 RMA
7895 RM
7895 RM
7895 RM
7895 RM
7895 RM
7895 RM
7895 RM
7895 RM
7895 RM
7895 RM
7895 RM
7895 RM
7895 RM
7895 RM
7078 RM
7078 RM
7078 RM
7078 RM
7078 RM
7078 RM
7078 RM

0S
0S
0S
0S
0S
0S
1SE
1SE
0S
0S
0S
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
2SE
2SE
1SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
3SF
3SF
3SF
3SF
3SF
5SA
5SA

00R
00R
00R
00R
00R
00R
00R
00R
00R
00R
00R
00R
00R
00R
00R
0RA
0RA
0RA
00R
00R
0RA
0RA
0RA
0RA
0RA
0RA
0RA
0RA
0RA
0RA
0RA
0RA
0RA
1RA
1RA
1RA
2RB
2RB
1RA
2RB
2RB
2RB
2RB
2RB
2RB
2RB
3RA
3RA

00TG
00TG
00TG
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
0TGB
1TGC
1TGC
0TGB
1TGC
1TGC
1TGC
1TGC
1TGC
1TGC
2TGC
2TGC
1TGC
2TGC
2TGC
2TGC
4TG
2TGC
2TGC
2TGC
4TG
4TG

27

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

REVERSE MARK
PUMPING UNITS

OILFIELD PRODUCTS GROUP

The Reverse Mark Units are similiar in appearance

to Lufkin Conventional Units; but in some cases,
due to its unique geometry, a smaller reducer and
prime mover can be used.

P
H
R
G
I

API Geometry Dimensions

Unit Size

RM-1824D-427-192
RM-1824D-365-192
RM-1824D-427-168
RM-1824D-365-168
RM-1280D-427-192
RM-1280D-365-192
RM-1280D-427-168
RM-1280D-365-168
RM-912D-427-192
RM-912D-365-192
RM-912D-305-192
RM-912D-427-168
RM-912D-365-168
RM-912D-305-168
RM-912D-427-144
RM-912D-365-144
RM-912D-305-144
RM-640D-305-192
RM-640D-365-168
RM-640D-305-168
RM-640D-427-144
RM-640D-365-144
RM-640D-305-144
RM-640D-256-144
RM-640D-305-120
RM-640D-256-120
RM-456D-305-168
RM-456D-365-144
RM-456D-305-144
RM-456D-256-144
RM-456D-365-120
RM-456D-305-120
RM-456D-256-120
RM-320D-256-144
RM-320D-305-120
RM-320D-256-120
RM-320D-213-120
RM-320D-305-100
RM-320D-256-100
RM-320D-246-86
RM-228D-213-120
RM-228D-256-100
RM-228D-213-100
RM-228D-173-100
RM-228D-246-86
RM-228D-213-86
RM-228D-200-74
RM-228D-173-74

28

(inches)

R1, R2, R3

PHASE
ANGLE

T.F. @ (90 Phase Angle)

S.U.
(Est.)

228.5
228.5
200.0
200.0
228.5
228.5
200.0
200.0
228.5
228.5
228.5
200.0
200.0
200.0
171.5
171.5
171.5
228.5
200.0
200.0
171.5
171.5
171.5
171.5
144.5
144.5
202.0
173.0
173.0
173.0
144.5
144.5
144.5
173.0
144.5
144.5
144.5
120.5
120.5
103.5
144.5
120.5
120.0
120.0
103.5
103.5
89.0
89.0

118
118
118
118
118
118
118
118
118
118
118
118
118
118
118
118
118
118
118
118
118
118
118
118
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
92
103
103
92
92
92
92
92
92

171
171
171
171
171
171
171
171
171
171
171
171
171
171
171
171
171
171
171
171
171
171
171
171
149
149
149
149
149
149
149
149
149
149
149
149
149
149
149
134
149
149
134
134
134
134
134
134

163
163
163
163
163
163
163
163
163
163
163
163
163
163
163
163
163
163
163
163
163
163
163
163
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
127
142
142
127
127
127
127
127
127

274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
237.88
237.88
237.88
237.88
237.88
237.88
237.88
237.88
237.88
237.88
237.88
237.88
237.88
237.88
237.88
206
237.88
237.88
206
206
206
206
206
206

111
111
111
111
111
111
111
111
111
111
111
111
111
111
111
111
111
111
111
111
111
111
111
111
96
96
96
96
96
96
96
96
96
96
96
96
96
96
96
79
96
96
79
79
79
79
79
79

45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
45, 38, 31
39, 33, 27
39, 33, 27
39, 33, 27
39, 33, 27
39, 33, 27
39, 33, 27
39, 33, 27
39, 33, 27
39, 33, 27
39, 33, 27
39, 33, 27
39, 33, 27
39, 33, 27
39, 33, 27
39, 33, 27
35, 30, 25
39, 33, 27
39, 33, 27
35, 30, 25
35, 30, 25
35, 30, 25
35, 30, 25
35, 30, 25
35, 30, 25

-9.0
-9.0
-9.0
-9.0
-9.0
-9.0
-9.0
-9.0
-12.0
-12.0
-9.0
-12.0
-9.0
-9.0
-9.0
-9.0
-9.0
-12.0
-12.0
-9.0
-12.0
-9.0
-9.0
-9.0
-12.5
-12.5
-14.0
-14.0
-12.5
-12.5
-12.5
-12.5
-12.5
-14.0
-14.0
-12.5
-12.5
-12.5
-12.5
-14.0
-14.0
-14.0
-14.0
-14.0
-14.0
-14.0
-14.0
-14.0

86.11
86.11
75.37
75.37
86.11
86.11
75.37
75.37
85.35
85.35
86.11
74.71
75.37
75.37
64.63
64.63
64.63
85.35
74.71
75.37
64.06
64.63
64.63
64.63
53.50
53.50
74.40
63.72
64.05
64.05
53.50
53.50
53.50
63.72
53.22
53.50
53.50
44.61
44.61
38.29
53.22
44.38
44.39
44.39
38.29
38.29
32.93
32.93

-1650
-1650
-515
-515
-1650
-1650
-515
-515
-1650
-1650
-1600
-515
-515
-1070
630
50
50
-1600
-515
-1070
630
50
50
-140
335
235
-1580
-765
-700
-870
680
335
235
-870
335
235
40
600
600
720
40
600
90
90
720
340
680
680

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

Counterbalance Data

Unit Size
Stroke
Structural Unbalance
Cranks

CBal., Cranks Only

4 No. OORO Counterweights
4 No. OOS Aux. Weights
8 No. OOS Aux. Weights
4 No. ORO Counterweights
4 No. OS Aux. Weights
8 No. OS Aux. Weights
4 No. OARO Counterweights
4 No. OAS Aux. Weights
8 No. OAS Aux. Weights
4 No. 1RO Counterweights
4 No. 1S Aux. Weights
8 No. 1S Aux. Weights
4 No. 2RO Counterweights
4 No. 2S Aux Weights
8 No. 2S Aux. Weights
4 No. 3CRO Counterweights
4 No. 3BS Aux. Weights
8 No. 3BS Aux. Weights
4 No. 5ARO Counterweights
4 No. 5A Aux. Weights
8 No. 5A Aux. Weights
4 No. 5CRO Counterweights
4 No. 5C Aux. Weights
8 No. 5C Aux. Weights

Unit Size
Stroke
Structural Unbalance
Cranks

CBal., Cranks Only

4 No. ORO Counterweights
4 No. OS Aux. Weights
8 No. OS Aux. Weights
4 No. OARO Counterweights
4 No. OAS Aux. Weights
8 No. OAS Aux. Weights
4 No. 1RO Counterweights
4 No. 1S Aux. Weights
8 No. 1S Aux. Weights
4 No. 2RO Counterweights
4 No. 2S Aux Weights
8 No. 2S Aux. Weights
4 No. 3CRO Counterweights
4 No. 3BS Aux. Weights
8 No. 3BS Aux. Weights
4 No. 5ARO Counterweights
4 No. 5A Aux. Weights
8 No. 5A Aux. Weights
4 No. 5CRO Counterweights
4 No. 5C Aux. Weights
8 No. 5C Aux. Weights
4 NO. 6RO Counterweights
4 No. 6 Aux. Weights
8 No. 6 Aux. Weights
4 No. 7RO Counterweights
4 No. 7 Aux.Weights
8 No. 7 Aux. Weights

REVERSE MARK
PUMPING UNITS

OILFIELD PRODUCTS GROUP

(shown in lbs., effective at polished rod with weights at maximum position, including structural unbalance.)

RM-640D-305-192
192"
1,600 lbs.
90110 RMA

RM-1824D-427-168
RM-1280D-427-168
RM-1824D-365-168
RM-1280D-365-168
RM-912D-365-168
168"
515 lbs.
90110 RMA

RM-912D-427-168
RM-640D-365-168
168"
515 lbs.
90110 RMA

RM-912D-305-168
RM-640D-305-168
168"
1,070 lbs.
90110 RMA

4,775
18,615
22,790
26,965
16,850
20,860
24,870
15,000
18,165
21,330
12,730
15,175
17,620
11,395
13,770
16,145
10,110
12,410
*14,710
8,635
10,185
*11,735
7,610
9,010
10,410

4,835
18,800
23,015
27,230
17,015
21,060
25,105
15,150
18,345
21,540
12,860
15,325
17,790
11,515
13,910
16,305
10,215
12,535
14,855
8,730
10,290
11,850
7,695
9,110
10,525

6,770
22,585
27,355
32,125
20,565
25,145
29,725
18,450
22,065
25,680
15,855
18,650
21,445
14,335
17,045
19,755
12,865
15,490
*18,115
11,180
12,950
*14,720
10,010
11,610
13,210

6,835
22,790
27,605
32,420
20,750
25,370
29,990
18,620
22,270
25,920
16,005
18,825
21,645
14,465
17,200
19,935
12,980
15,630
18,280
11,285
13,070
14,855
10,105
11,720
13,335

6,215
22,030
26,800
....
20,010
24,590
29,170
17,895
21,510
25,125
15,300
18,095
20,890
13,780
16,490
19,200
12,310
14,935
*17,560
10,625
12,395
*14,165
9,455
11,055
12,655

RM-320D-256-144
144"
870 lbs.
7895 RM

RM-456D-365-120
120"
680 lbs.
7895 RM

RM-640D-305-120
RM-456D-305-120
120"
335 lbs.
7895 RM

RM-320D-305-120
120"
335 lbs.
7895 RM

RM-640D-256-120
RM-456D-256-120
RM-320D-256-120
120"
235 lbs.
7895 RM

RM-320D-213-120
120"
40 lbs.
7895 RM

5,435
18,505
22,845

16,650
20,120

14,185
16,875
*19,565
12,725
15,335
*17,945
11,350
13,900
*16,450
9,765
11,500
*13,235
8,625
10,200
*11,775
7,910
8,845
9,780
7,015
7,715
8,415

8,190
23,755
28,925
34,095
21,545
25,680
29,815
18,610
21,815
25,020
16,870
19,980
23,090
15,235
18,275
21,315
13,345
15,410
17,475
11,990
13,865
15,740
11,140
12,250
13,360
10,070
10,905
11,740

7,845
23,410
28,580

21,200
25,335

18,265
21,470
24,675
16,525
19,635
22,745
14,890
17,930
20,970
13,000
15,065
17,130
11,645
13,520
15,395
10,795
11,905
13,015
9,725
10,560
11,395

7,885
23,530
28,725

21,310
25,465

18,360
21,580
24,800
16,610
19,735
22,860
14,970
18,025
*21,080
13,070
15,150
*17,230
11,705
13,590
15,475
10,850
11,970
13,090
9,775
10,615
11,455

7,745
23,310

21,100

18,165
21,370
24,575
16,425
19,535
22,645
14,790
17,830
*20,870
12,900
14,965
*17,030
11,545
13,420
15,295
10,695
11,805
12,915
9,625
10,460
11,295

7,550
.

17,970

16,230
16,391

14,595
17,635
*20,675
12,705
14,770
*16,835
11,350
13,225
15,100
10,500
11,610
12,720
9,430
10,265
11,100

RM-1824D-427-192
RM-1280D-427-192
RM-1824D-365-192
RM-1280D-365-192
192"
1,650 lbs.
90110 RMA

RM-912D-427-192
RM-912D-365-192
192"
1,650 lbs.
90110 RMA

RM-912D-305-192
192"
1,600 lbs.
90110 RMA

4,725
18,565
22,740
26,915
16,800
20,810
24,820
14,950
18,115
21,280
12,680
15,125
17,570
11,350
13,725
16,100
10,060
12,360
14,660
8,585
10,135
11,685
7,560
8,960
10,360

4,785
18,750
22,965
27,180
16,965
21,010
25,055
15,100
18,295
21,490
12,810
15,275
17,740
11,465
13,860
16,255
10,165
12,485
*14,805
8,680
10,240
*11,800
7,645
9,060
10,475

RM-456D-256-144
144"
870 lbs.
7895 RM

5,405
18,405
22,720

16,560
20,015

14,110
16,785
19,460
12,655
15,255
17,855
11,290
13,825
16,360
9,710
11,435
13,160
8,575
10,140
11,705
7,870
8,800
9,730
6,975
7,675
8,375

* Use only one aux. weight per counterweight on belt cover side on 912D and 320D units.

29

OILFIELD PRODUCTS GROUP

Counterbalance Data
Unit Size
Stroke
Structural Unbalance
Cranks

CBal., Cranks Only

4 No. OORO Counterweights
4 No. OOS Aux. Weights
8 No. OOS Aux. Weights
4 No. ORO Counterweights
4 No. OS Aux. Weights
8 No. OS Aux. Weights
4 No. OARO Counterweights
4 No. OAS Aux. Weights
8 No. OAS Aux. Weights
4 No. 1RO Counterweights
4 No. 1S Aux. Weights
8 No. 1S Aux. Weights
4 No. 2RO Counterweights
4 No. 2S Aux Weights
8 No. 2S Aux. Weights
4 No. 3CRO Counterweights
4 No. 3BS Aux. Weights
8 No. 3BS Aux. Weights
4 No. 5ARO Counterweights
4 No. 5A Aux. Weights
8 No. 5A Aux. Weights
4 No. 5CRO Counterweights
4 No. 5C Aux. Weights
8 No. 5C Aux. Weights
4 NO. 6RO Counterweights
4 No. 6 Aux. Weights
8 No. 6 Aux. Weights
4 No. 7RO Counterweights
4 No. 7 Aux.Weights
8 No. 7 Aux. Weights
Unit Size
Stroke
Structural Unbalance
Cranks

CBal., Cranks Only

4 No. ORO Counterweights
4 No. OARO Counterweights
4 No. 1RO Counterweights
4 No. 1S Aux. Weights
4 No. 2RO Counterweights
4 No. 2S Aux Weights
8 No. 2S Aux. Weights
4 No. 3CRO Counterweights
4 No. 3BS Aux. Weights
8 No. 3BS Aux. Weights
4 No. 5ARO Counterweights
4 No. 5A Aux. Weights
8 No. 5A Aux. Weights
4 No. 5CRO Counterweights
4 No. 5C Aux. Weights
8 No. 5C Aux. Weights
4 NO. 6RO Counterweights
4 No. 6 Aux. Weights
8 No. 6 Aux. Weights
4 No. 7RO Counterweights
4 No. 7 Aux.Weights
8 No. 7 Aux. Weights

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

REVERSE MARK
PUMPING UNITS

(shown in lbs., effective at polished rod with weights at maximum position, including structural unbalance.)

RM-456D-305-168
168"
1,580 lbs.
7895 RM

RM-912D-427-144
144"
630 lbs.
90110 RMA

RM-640D-427-144
144"
630 lbs.
90110 RMA

RM-912D-365-144
RM-640D-365-144
RM-912D-305-144
RM-640D-305-144
144"
50 lbs.
90110 RMA

3,820

15,010
18,725
22,440
13,425
16,400
19,375
11,310
13,615
15,920
10,060
12,295
14,530
8,890
11,075
13,260
7,530
9,015
10,500
6,550
7,900
9,250
5,940
6,740
7,540
5,175
5,775
6,375

9,125
27,565
33,130
38,695
25,215
30,555
35,895
22,745
26,965
31,185
19,270
22,980
26,240
17,950
21,110
24,270
16,230
19,295
*22,360
14,270
16,330
*18,390
12,905
14,770
16,635

9,200
27,805
33,420
39,035
25,430
30,820
36,210
22,945
27,200
31,455
19,890
23,175
26,460
18,100
21,290
24,480
16,370
19,460
22,550
14,390
16,470
18,550
13,010
14,895
16,780

8,545
26,985
32,550

24,635
29,975

22,165
26,385
30,605
19,140
22,400
25,660
17,370
20,530
23,690
15,650
18,715
*21,780
13,690
15,750
*17,810
12,325
14,190
16,055

5,540

18,610
22,950
27,290
16,755
20,225
23,695
14,290
16,980
19,670
12,830
15,440
18,050
11,455
14,005
16,555
9,870
11,605
13,340
8,730
10,305
11,880
8,015
8,950
9,885
7,120
7,820
8,520

5,575

18,575
22,890
27,205
16,730
20,185
23,640
14,280
16,955
19,630
12,825
15,425
18,025
11,460
13,995
16,530
9,880
11,605
13,330
8,745
10,310
11,875
8,040
8,970
9,900
7,145
7,845
8,545

8,355

24,445

21,975

18,950
22,210
25,470
17,810
20,340
23,500
15,460
18,525
21,590
13,500
15,560
17,620
12,135
14,000
15,865

RM-228D-213-120
120"
40 lbs.
7895 RM

RM-320D-305-100
RM-320D-256-100
100"
600 lbs.
7895 RM

RM-228D-256-100
100"
600 lbs.
7895 RM

RM-228D-213-100
RM-228D-173-100
100"
90 lbs.
7078 RM

RM-320D-246-86
RM-228D-246-86
86"
720 lbs.
7078 RM

RM-228D-213-86
86"
340 lbs.
7078 RM

RM-228D-200-74
RM-228D-173-74
74"
680 lbs.
7078 RM

7,590

18,065

16,315
19,440

14,675
17,730
**20,785
12,775
14,855
16,935
11,410
13,295
15,180
10,555
11,675
12,795
9,480
10,320
11,160

9,605
28,270
25,620
22,100
25,940
20,015
23,745
27,475
18,055
21,700
*25,345
15,790
18,270
*20,750
14,160
16,410
18,660
13,145
14,480
15,815
11,865
12,870
13,875

9,655

22,360

20,120
23,870

18,150
21,810

15,870
18,360
20,850
14,235
16,495
18,755
13,210
14,550
15,890
11,925
12,935
13,945

4,670

12,595
15,435
18,275
11,195
14,005
16,815
9,530
11,475
13,425
8,265
10,040
11,815
7,475
8,535
9,595
6,470
7,270
8,070

6,030

15,215
18,505
21,800
13,590
16,850
*20,110
11,665
13,920
*16,180
10,195
12,255
*14,310
9,285
10,510
11,735
8,120
9,045
9,975

5,650

14,835
18,125

13,210
16,470
19,730
11,285
13,540
15,800
9,815
11,875
13,930
8,905
10,130
11,355
7,740
8,665
9,595

6,855

17,535

15,645

13,405
16,030

11,700
14,095
16,485
10,640
12,065
13,490
9,280
10,360
11,440

RM-456D-365-144
144"
765 lbs.
7895 RM

RM-456D-305-144
144"
700 lbs.
7895 RM

RM-640D-256-144
144"
140 lbs.
90110 RMA

* Use only one aux. weight per counterweight on belt cover side on 912D and 320D units. ** Use only one aux. weight per counterweight on belt cover side on 228D units.

30

CHURCHILL BRAND BEAM

BALANCED PUMPING UNITS

Churchill Beam Balanced Pumping Units, available exclusively from

Lufkin Industries, have been field proven since 1954. They offer the same
rugged dependability as our conventional units. On shallow wells around
the world, they have long been the producers unit of choice.

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

CHURCHILL BEAM
BALANCED PUMPING UNITS

OILFIELD PRODUCTS GROUP

Highest point weights reach

when head is at down position

P
W

J
A

Lowest point weights reach

when head is at up position
V Max.

U Min.
I
E

G
D

N
L

C
M

Dimensional Data

(inches)

Unit Size
B-80-76-64
B-80-76-54
B-80-109-48
B-80-109-42
B-57-76-54
B-57-109-48
B-57-109-42
B-50-89-54
B-50-89-48
B-50-89-42
B-40-76-48
B-40-89-42
B-40-76-42
B-40-89-36
B-25-67-36
B-25-56-36
B-25-67-30
B-25-53-30
B-16-53-30
B-16-40-24
B-13-32-24
B-10-32-18
B-6.4-32-16
B-6.4-28-12

C
55.00
44.18
44.18
31.50
44.18
44.18
31.50
44.00
43.62
32.00
41.25
32.00
32.00
32.00
34.25
34.25
34.25
34.25
35.75
35.75
33.30
23.25
23.25
16.00

A
71.00
60.00
60.00
48.00
60.00
60.00
48.00
60.00
60.00
48.00
56.00
48.00
48.00
48.00
38.25
38.25
38.25
38.25
38.25
38.25
35.75
25.50
25.50
18.25

D
10
10
10
10
10
10
10
8
8
8
8
8
8
8
8
8
8
8
6
6
5
5
5
4

E
32.0
32.0
43.0
41.6
30.8
41.0
39.6
30.8
41.0
39.6
42.9
39.6
40.2
48.6
27.3
25.2
44.4
42.3
35.2
28.8
28.8
18.2
18.8
17.8

G
26.2
26.2
26.2
26.2
26.2
26.2
26.2
22.1
22.1
22.1
22.1
22.1
22.1
22.1
17.8
17.8
17.8
17.8
15.8
15.8
14.8
14.3
12.1
11.1

H
116.0
98.7
98.7
98.7
98.7
98.7
98.7
96.5
96.5
96.5
96.5
96.5
96.5
96.5
83.0
83.0
83.0
83.0
76.0
66.0
62.0
50.5
50.2
44.5

NOTE: Do not use above dimensions for foundation. Request foundation plan.

32

I
53.8
36.5
38.0
39.0
40.0
41.5
42.5
40.0
41.5
42.5
36.5
42.5
40.0
48.9
35.5
33.3
41.3
39.8
30.0
28.1
18.8
17.5
20.0
21.5

J
175.8
158.5
155.5
148.5
162.0
159.0
152.0
162.3
159.0
152.0
156.5
152.0
151.0
146.8
128.8
126.8
125.1
123.2
114.5
99.6
98.2
77.0
73.0
71.5

L
148.0
148.0
148.0
148.0
148.0
148.0
148.0
148.5
148.5
133.5
148.5
133.5
133.5
133.5
110.0
110.0
110.0
110.0
88.0
88.0
75.5
69.5
63.5
63.5

M
42.75
42.75
42.75
42.75
42.75
42.75
42.75
42.75
42.75
42.75
42.75
42.75
42.75
42.75
36.00
36.00
36.00
36.00
36.00
33.50
33.50
30.00
30.00
24.00

N
21.50
21.50
21.50
21.50
21.50
21.50
21.50
14.81
14.81
14.81
14.81
14.81
14.81
14.81
13.13
13.13
13.13
13.13
8.88
8.88
8.75
6.50
6.25
5.91

P
50.00
50.00
50.00
50.00
50.00
50.00
50.00
35.50
35.50
35.50
35.50
35.50
35.50
35.50
34.88
34.88
34.88
34.88
28.88
28.88
29.25
22.75
22.00
22.00

U
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16

V
47.50
47.50
47.50
47.50
47.50
47.50
47.50
37.25
37.25
37.25
36.50
37.25
36.50
37.25
44.50
44.50
44.50
44.50
36.25
36.25
25.72
24.38
23.75
25.62

W
188.00
177.00
176.90
148.80
177.0
176.9
148.8
177.0
176.9
148.8
172.2
149.5
149.5
149.5
117.8
118.0
117.2
117.1
117.3
117.0
115.4
79.0
79.2
65.5

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

CHURCHILL BEAM
BALANCED PUMPING UNITS

OILFIELD PRODUCTS GROUP

Structural Data
Unit Size
B-80-76-64
B-80-76-54
B-80-109-48
B-80-109-42
B-57-76-54
B-57-109-48
B-57-95-42
B-50-89-54*
B-50-89-48*
B-50-89-42*
B-40-76-48
B-40-89-42
B-40-76-42
B-40-89-36
B-25-67-36
B-25-56-36
B-25-67-30
B-25-53-30
B-16-53-30
B-16-40-24
B-13-32-24*
B-10-32-18
B-6.4-32-16
B-6.4-28-12

Polished Rod
Capabity (lbs.)

Stroke Lengths
(inches)

Pitman Bearing
(type)

Saddle Bearing
(type)

7600
7600
10,900
10,900
7600
10,900
9500
8900
8900
8900
7600
8900
7600
8900
6700
5600
6700
5300
5300
4000
3200
3200
3200
2800

64, 54, 49, 41

54, 45, 41, 35
48, 41, 37, 32
42, 35, 32, 27
54, 45, 41, 35
48, 41, 37, 32
42, 35, 32, 27
54, 45, 41, 35
48, 41, 37, 32
42, 35, 32, 27
48, 40, 36, 31
42, 35, 32, 27
42, 35, 32, 27
36, 31, 27, 24
36, 29, 23, 19
36, 29, 23, 19
30, 25, 19-1/2, 16
30, 25, 19-1/2, 16
30, 24, 20, 16
24, 20-1/2, 16, 13-1/2
24, 19-1/2, 16, 13
18, 15, 12, 10
16, 13
12, 9

Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction ease
Friction-ease

Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction-ease
Friction ease
Friction-ease

Crank Pin Bearings

(type)
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Spherical Roller
Friction-ease
Friction-ease
Friction ease
Friction-ease

Wireline Hanger
(inches)
.75 x 7 CTRS.
.75 x 7 CTRS.
.75 x 7 CTRS.
.75 x 7 CTRS.
.75 x 7 CTRS.
.75 x 7 CTRS.
.75 x 7 CTRS.
.75 x 7 CTRS.
.75 x 7 CTRS.
.75 x 7 CTRS.
.75 x 7 CTRS.
.75 x 7 CTRS.
.75 x 7 CTRS.
.75 x 7 CTRS.
.63 x 6 CTRS.
.63 x 6 CTRS.
.63 x 6 CTRS.
.63 x 6 CTRS.
.63 x 6 CTRS.
.63 x 6 CTRS.
.50 x 4.25 CTRS.
.50 x 4.25 CTRS.
.50 x 4.25 CTRS.
.50 x 4.25 CTRS.

*Non API size

Portable Base Data

Unit Size
B-80-76-64
B-80-76-64
B-80-76-54
B-80-76-54
B-80-109-48
B-80-109-48
B-80-109-42
B-80-109-42
B-57-76-54
B-57-76-54
B-57-109-48
B-57-109-48
B-57-95-42
B-57-95-42
B-50-89-54

Base
GPB
EPB
GPB
EPB
GPB
EPB
GPB
EPB
GPB
EPB
GPB
EPB
GPB
EPB
GPB

(inches)

Length
206
160
206
160
206
160
206
160
206
160
206
160
206
160
188

Width
72
72
72
72
72
72
72
72
72
72
72
72
72
72
46.5

Unit Size
B-50-89-54
B-50-89-48
B-50-89-48
B-50-89-42
B-50-89-42
B-40-76-48
B-40-76-48
B-40-89-42
B-40-89-42
B-40-76-42
B-40-76-42
B-40-89-36
B-40-89-36
B-25-67-36
B-25-67-36

Base
EPB
GPB
EPB
GPB
EPB
GPB
EPB
GPB
EPB
GPB
EPB
GPB
EPB
GPB
EPB

Length
177
188
177
188
162
188
177
188
162
188
162
188
162
167
132

Width
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
40.5
40.5

Unit Size
B-25-56-36
B-25-56-36
B-25-67-30
B-25-67-30
B-25-53-30
B-25-53-30
B-16-53-30
B-16-53-30
B-16-40-24
B-16-40-24
B-13-32-24
B-10-32-18
B-6.4-32-16
B-6.4-28-12

Base
GPB
EPB
GPB
EPB
GPB
EPB
GPB
EPB
GPB
EPB
EPB
EPB
EPB
EPB

Length
167
132
167
132
167
132
143
119
143
119
96
88
82
75

Width
40.5
40.5
40.5
40.5
40.5
40.5
39.8
39.8
37.3
37.3
36.5
33.5
33.5
27.1

EPB = Electric Portable Base

GPB = Gas Portable Base

Churchill has been the industrys

preferred brand of beam balanced
units since 1954, and is now a
proud part of the Lufkin family.

33

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

CHURCHILL BEAM
BALANCED PUMPING UNITS

OILFIELD PRODUCTS GROUP

Counterbalance Data
Unit
Stroke
Structural Unbalance

1 set-std. wts.
2 sets-std. or 1 set-HD wts.
3 sets-std. wts. or
1 set-std. & 1 set-HD wts.
4 sets-std. or 2 sets-HD. Wts.
5 sets-std. wts or
1 set-std. & 2 sets-HD wts.
6 sets-std. or 3 sets-HD wts.
7 sets-std. wts. or
1 set-std. & 3 sets-HD wts.
8 sets-std. or 4 sets-HD wts.
9 sets-std. wts or
1 set-std. & 4 sets-HD wts.
10 sets-std. or 5 sets-HD wts.
1 set-std. & 5 sets-HD wts
6 sets-HD wts.
1 set-std. & 6 sets-HD wts
7 sets-HD wts.
1 set-std. & 7 sets-HD wts
8 sets-HD wts.
1 set-std. & 8 sets-HD wts
9 sets-HD wts.
1 set-std. & 9 sets-HD wts
10 sets-HD wts.
1 set-std. & 10 sets-HD wts
11 sets-HD wts.
1 set-std. & 11 sets-HD wts
12 sets-HD wts.
Unit
Stroke
Structural Unbalance

1 set-std. wts.
2 sets-std. wts.
3 sets-std. wts.
4 sets-std. wts.
5 sets-std. wts
6 sets-std. wts.
7 sets-std. wts.
8 sets-std. wts.
1 set-std. wts
2 sets-std. or 1 sets-HD wts.
3 sets-std. wts. or
1 set-std. & 1 sets-HD wts
4 sets-std. or 2 sets-HD wts.
5 sets-std. wts. or
1 set-std. & 2 sets-HD wts
6 sets-std. or 3 sets-HD wts.
7 sets-std. wts. or
1 set-std. & 3 sets-HD wts
8 sets-std. or 4 sets-HD wts.
9 sets-std. wts. or
1 set-std. & 4 sets-HD wts
10 sets-std. or 5 sets-HD wts.
1 set-std. & 5 sets-HD wts
6 sets-HD wts.
1 set-std. & 6 sets-HD wts
7 sets-HD wts.
1 set-std. & 7 sets-HD wts
NOTE: HD = heavy duty

34

(shown in lbs., effective at polished rod with weights at maximum position, including structural unbalance.)

80-76-64

80-76-54
57-76-54

80-109-48
57-109-48

80-109-42
57-109-42

50-89-54

50-89-48

50-89-42
40-89-42

40-76-48

40-76-42

40-89-36

64
210 lbs.
570
1135

54
240 lbs.
675
1095

48
335 lbs.
770
1190

42
330 lbs.
800
1260

54
220 lbs.
655
1075

48
270 lbs.
705
1130

42
330 lbs.
795
1245

48
310 lbs.
775
1230

42
285 lbs.
750
1200

36
295lbs.
760
1215

1580
2010

1505
1905

1605
2005

1700
2125

1485
1885

1540
1940

1685
2105

1665
2095

1640
2060

1650
2070

2430
2840

2290
2665

2390
2765

2535
2935

2270
2645

2325
2700

2515
2915

2510
2910

2470
2860

2480
2870

3235
3620

3030
3380

3130
3485

3315
3680

3010
3360

3065
3420

3285
3645

3300
3675

3240
3600

3250
3610

3995
4355
4810
5175
5570
5915
6310
6655

3720
4045
4490
4825
5285
5510
5860
6175
6515

3825
4155
4595
4930
5295
5615
5970
6280
6625
6925
7255
7545
7870
8145
8450
8725

4035
4370
4895
5245
5630
5970
6335
6660
7015
7325
7665
7965
8285
8575
8880
9155

3700
4025
4470
4800
5165
5485
5840
6150
6490
6795
7120
7415

3760
4090
4530
4865
5230
5550
5905
6215
6590
6860
7190
7480

3995
4330
4845
5195
5570
5910
6270
6595
6945
7250
7585

4040
4390
4865
5220
5610
5955
6330
6665

3950
4285
4800
5150
5526
5865
6225
6550
6900
7205
7540

3960
4295
4810
5160
5540
5875
6235
5560
6910
7220
7550

25-67-36

25-56-36

25-67-30

25-53-30

16-53-30

16-40-24

13-32-24

10-32-18

6.4-32-16

6.4-28-12

36
170 lbs.

625
1060

36
135 lbs.

590
1025

30
190 lbs.

645
1080

30
160 lbs.

615
1050

30
130 lbs.

285
1020

1445
1845

1500
1900

1470
1870

1440
1835

2260
2620

2225
2585

2280
2640

2250
2610

2215
2580

2965
3290

2930
3255

2985
3310

2950
3280

2925
3250

3395
2885
4475
4800
5140
5445
5770

3555
3850
4440
4770

3615
3905
4495
4820
5160
5465
5790

3585
3875
4465
4790

3555
3845
4435
4755

24
80 lbs.
535
1005
1455
1885
2295
2685

18
105 lbs.
565
1000
1405
1780
2130
2450

16
80 lbs.
540
975
1380
1755
2105
2425

12
105 lbs.
665
1190
1670
2120
2525

1580
1880

24
110 lbs.
565
1005
1425
1825
2205
2570
2915
3240

SPECIAL APPLICATION
PUMPING UNITS

Lufkin manufactures sucker rod pumping units for numerous special

applications including:
Power Lift Folding Beam Pumping Units. This unit is designed for use in
overhead irrigated fields where a large gearbox and longer stroke are
needed. The unit folds up to allow the sprinkler system to travel over it, then
stands back up to continue pumping oil.
Low Profile Pumping Units. A compact unit designed for installation in fields
irrigated by traveling sprinkler systems or in urban areas where the low profile
feature may be desirable. Several sizes of the unit can be shipped from the
factory completely assembled.
Portable/Trailer Mount Pumping Units. The Lufkin Roadrunner is a trailermounted, self-contained conventional pumping unit that lowers for legal
highway transport. It can be erected and fully functional in a few minutes
at the well site. These units are available for sale, rental or lease.
Slant Hole Pumping Units. The Slant Hole Unit is designed to pump wells
deviated up to 45 at the surface. Many standard conventional unit components are used to manufacture these units.

OILFIELD PRODUCTS GROUP

SPECIAL APPLICATION
PUMPING UNITS

Special Application Pumping Units

The need to efficiently increase production of hydrocarbons has stimulated the development of a complex industry driven by technology. And today, with
demand for energy supplies growing in countries
around the world, companies like Lufkin Industries
must continue to expand their capabilities in broader and more efficient ways than ever before. This
requires extensive and costly research, enormous
capital investments and the hard-devoted work of
many skilled and experienced people.
Founded in 1902, Lufkin Industries has manufactured and supplied the worldwide petroleum industry with more sucker rod pumping units than any
other industry manufacturer. Lufkin pumping units
are designed to help producers lower their production costs and optimize well efficiency. The company
has earned a reputation throughout the industry for
quality design, construction, dependability, innovation
and service.

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

The four pages that follow detail the specifications

of several Lufkin units that have been designed and
manufactured to meet special requests:
Power Lift folding beam units designed for use in
overhead irrigated fields where a large gearbox
and longer stroke are needed.
Low Profile pumping units designed for installation in fields irrigated by traveling sprinkler systems or in urban areas where the low profile feature may be more aesthetic.
Portable/Trailer Mount pumping units designed as
a self-contained conventional unit that lowers for
legal highway transport.
Slant Hole pumping units designed to pump
deviated wells.
Regardless of your pumping requirements, Lufkin
Industries has the experience and capability to help
you profitably produce your wells.

Over the years, Lufkin has introduced many different

pumping unit designs. Designs like the Mark II with its
unique geometry and phased counterbalance feature
lowers peak torque and horsepower requirements.
The Lufkin Air Balanced units use compressed air
instead of heavy cast iron counterweights for accurate, fingertip control of counterbalance.
Customers frequently ask Lufkin engineers to design
pumping units for special, and sometimes, unusual
applications. Lufkin does not shy away from unusual
requests. If an alternative means of providing the
reciprocating motion to activate a downhole rod pump
can be employed, Lufkin engineers can design it. If it
will help operators to efficiently increase production of
their wells, Lufkin will build it.

36

Lufkin has always been the industry innovator in the design and manufacture of special application pumping units.

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

POWER LIFT FOLDING BEAM

PUMPING UNITS

OILFIELD PRODUCTS GROUP

Power Lift Folding Beam Pumping Units

The low clearance Power Lift Unit is an API size 640D-305-144 pumping unit that can hydraulically fold
up to a height of 15 ft. Lowering the unit approximately 3 ft. below the ground surface will allow a 12 ft.
center pivot irrigation system to travel over the unit

Dimensional Data

(inches)
Height
351

Folded
Height
179

Polished Rod
Capacity (lbs.)
30,500

Stroke Length
(inches)
144, 123, 103

Unit Size
LC-640D-305-144

Base Length
(w/Hi-Prime)
353

Set
Back
47.63

Overall
Length
401

Min. Carrier Bar

Ground Clearance
42

Structural Data
Unit Size
LC-640D-305-144

Walking
Beam
W33 x 221

Wireline Hanger
(inches)
1-3/8 x 16 CTRS.

Crank Pin,
Equalizer Bearing
1SE

Samson Post
Bearing
OTGB

Counterbalance Data
Unit Size
Structural Unbalance
Cranks
C'Bal., Cranks Only
4 No. OORO Counterweights
4 No. OOS Aux. Weights
8 No. OOS Aux. Weights
4 No. ORO Counterweights
4 No. OS Aux. Weights
8 No. OS Aux. Weights
4 No. OARO Counterweights
4 No. OAS Aux. Weights
8 No. OAS Aux. Weights
4 No. 1RO Counterweights
4 No. 1S Aux. Weights
8 No. 1S Aux. Weights
4 No. 2RO Counterweights
4 No. 2S Aux. Weights
8 No. 2S Aux. Weights
4 No. 3CRO Counterweights
4 No. 3BS Aux. Weights
8 No. 3BS Aux. Weights
4 No. 5ARO Counterweights
4 No. 5AS Aux. Weights
8 No. 5AS Aux. Weights
4 No. 5CRO Counterweights
4 No. 5C Aux. Weights
8 No. 5C Aux. Weights
4 No. 6RO Counterweights
4 No. 6 Aux. Weights
8 No. 6 Aux. Weights
4 No. 7RO Counterweights
4 No. 7 Aux. Weights
8 No. 7 Aux. Weights

LC-640D-305-144
505 lbs.
94110CA
6,770 lbs
25,400
31,020
36,640
23,020
28,415
33,810
20,520
24,780
29,040
17,465
20,755
24,045
15,675
18,865
22,055
13,940
17,030
20,120
11,955
14,035
16,115
10,580
12,460
14,340
9,720
10,830
11,940
8,645
9,480
10,315

The Power Lift Unit design is conventional except for the addition of a
"knee joint" in the rear Samson post leg which allows the post to fold,
thus, lowering the beam and horsehead.

It can be shipped partially assembled to minimize equipment and

personnel during installation.

37

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

LOW PROFILE
PUMPING UNITS

OILFIELD PRODUCTS GROUP

MAX.

MIN.

P
I

AA

N
MIN.

K
H

Dimensional Data
Unit Size
LP-320D-246-86
LP-228D-173-64
LP-160D-173-64
LP-114D-133-54

W
M

A
109.00
94.00
94.00
84.00

X
B

(inches)

B
55.50
41.50
41.50
31.13

C
88.00
72.00
72.00
66.00

E
157.50
142.50
138.00
122.25

F
G
H
I
52.75 105.50 52.00 9.75
52.75 97.50 45.00 12.00
40.38 97.50 40.50 12.00
40.38 87.25 35.00 17.00

J
64.00
56.00
56.00
50.00

K
24.00
19.00
19.00
19.00

L
7.50
6.38
6.38
6.44

M
51.75
51.75
51.75
48.25

N
16.38
16.38
16.38
12.25

P
141.50
119.00
119.00
102.00

T
34.00
30.00
26.00
24.00

U
31.38
29.50
17.13
13.63

V
31.25
30.00
30.25
29.25

W
43.00
37.00
32.00
25.00

X
86.00
78.50
70.13
66.75

AA
40.88
24.13
28.56
22.56

NOTE: Do not use above dimensions for foundation. Request foundation plan.

Structural Data
Unit Size
LP-320D-246-86
LP-228D-173-64
LP-160D-173-64
LP-114D-133-54

Polished Rod
Capacity (lbs.)

Stroke Lengths
(inches)

Crank Pin
Bearing

Samson Post
Bearing

Equalizer
Bearing

Wireline Hanger
(inches)

Cranks

24,600
17,300
17,300
13,300

86, 74, 64
64, 54, 44
64, 54, 44
54, 42, 36

2SE
3SF
3SF
4SF

2LPTGB
2LPTGB
2LPTGB
P19

1RA
2RB
2RB
3RA

1.13 x 12 CTRS
1.00 x 9 CTRS.
1.00 x 9 CTRS.
.88 x 9 CTRS

LP8664A
LP6456A
LP6456A
LP5450A

Counterbalance Data

(shown in lbs., effective at polished rod with weights at maximum position, including structural unbalance.)

Unit
Stroke
Structural Unbalance
C'Bal., Cranks only

86"
240 lbs.
4,835

4 No. 2RO Counterweights

4 No. 2S Aux. weights
8 No. 2S Aux. weights
4 No. 3CRO Counterweights
4 No. 3BS Aux. weights
8 No. 3BS Aux. weights
4 No. 5ARO Counterweights
4 No. 5A Aux. weights
8 No. 5A Aux. weights
4 No. 5CRO Counterweights
4 No. 5C Aux. weights
8 No. 5C Aux. weights
4 No. 6RO Counterweights
4 No. 6 Aux. weights
8 No. 6 Aux. weights
4 No. 7RO Counterweights
4 No. 7 Aux. weights
8 No. 7 Aux. weights

12,130
14,745
17,360
10,940
13,570
16,200
9,455
11,305
13,155
8,270
9,965
11,660

38

LP-228D-173-64
LP-160D-173-64

LP-320D-246-86

74"
240 lbs.

LP-114D-133-54

64"
240 lbs.

64"
100 lbs.

54"
100 lbs.

44"
100 lbs.

54"
305 lbs.

42"
305 lbs.

36"
306 lbs.

5,415

6,040

3,700

4,100

4,985

2,940

3,585

4,080

13,635
16,580
19,525
12,290
15,255
18,220
10,615
12,700
14,785
9,285
11,195
13,105

15,245
18,545
21,845
13,740
17,060
20,380
11,865
14,200
16,535
10,375
12,515
14,655

8,850
10,915
12,980
7,550
9,450
11,350
6,755
7,905
9,055
5,685
6,570
7,455

9,820
12,115
14,410
8,375
10,485
12,595
7,495
8,775
10,055
6,305
7,285
8,265

11,970
14,770

10,205
12,785
15,365
9,130
10,690
12,250
7,680
8,875
10,070

7,945
9,950
11,955
6,700
8,560
10,420
5,945
7,080
8,215
4,905
5,775
6,645

9,820
12,320

8,270
10,585
12,900
7,325
8,735
10,145
6,030
7,115
8,200

11,260

9,475
12,140

8,390
10,015
11,640
6,895
8,145
9,395

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

Dimensional Data

PORTABLE/TRAILER MOUNT
PUMPING UNITS

OILFIELD PRODUCTS GROUP

(inches)

Unit Size
CM-456D-305-120
CM-320D-305-100
CM-228D-246-86
CM-160D-173-74

A
124.00
124.00
118.00
118.00

B
159.38
133.50
113.50
115.13

C
159.75
157.75
151.18
151.06

D
115.00
115.00
114.06
114.06

E
113.00
113.00
121.00
107.00

F
417.50
417.50
354.00
372.00

G
52.50
44.75
38.63
33.13

H
326.44
308.69
283.75
277.38

I
17.94
32.88
20.75
43.13

J
92.00
92.00
78.00
78.00

K
61.00
61.00
37.00
37.00

L
66.00
71.31
67.06
69.25

M
96.00
96.00
96.00
96.00

N
51.88
51.88
46.63
47.00

P
59.00
47.00
48.00
48.00

Q
48.00
48.00
48.00
48.00

Unit Size
CM-456D-305-120
CM-320D-305-100
CM-228D-246-86
CM-160D-173-74

R
93.81
68.00
73.00
73.63

S
57.38
43.44
48.50
50.13

T
33.38
34.00
30.00
26.00

U
83.13
87.25
72.75
70.00

V
26.00
26.00
26.00
26.00

W
36.00
36.00
26.13
26.13

X
97.38
86.38
78.50
70.50

Y
23.75
23.75
23.63
23.75

Z
28.13
28.13
23.00
23.25

AA
26.00
26.00
20.50
14.38

BB
89.75
89.75
90.00
90.00

CC
18.00
18.00
24.00
24.00

DD
323.00
323.00
292.50
295.50

EE
127.50
127.50
117.25
128.50

FF
97.00
97.00
95.00
95.00

GG
131.00
131.00
111.50
109.00

Structural Data
Unit Size
CM-456D-305-120
CM-320D-305-100
CM-228D-246-86
CM-160D-173-74

Polished Rod
Capacity (lbs.)
30,500
30,500
24,600
17,300

Counterbalance Data

Stroke Lengths
(inches)
120, 101, 84, 66
100, 84, 70, 55
83, 73, 60, 48
74, 61, 48, 36

Walking
Beam
W27 x 161
W27 x 146
W27 x 117
W24 x 84

Wireline Hanger
(inches)
1.25 x 12 CTRS.
1.25 x 12 CTRS.
1.13 x 12 CTRS.
1.00 X 9 CTRS.

Cranks
(type)
8492RX
8492RX
8478RX
7278RX

Crank Pin
Bearing
2SE
2SE
3SF
3SF

Equalizer
Bearing
2SE
2SE
3SF
3SF

Center
Bearing
1MTG
2MTG
2MTG
2MTG

Engine
Engine HP
Type
@ 1800 RPM
CAT3304G
83
WAUESHA 330G
63
WAUESHA 220G
41
WAUESHA 220G
41

(shown in lbs., effective at polished rod with weights at maximum position, including structural unbalance.
Minimum counterbalance shown is with weights moved all the way in on the crank.)

Unit
Stroke
Structural Unbalance
Cranks
C'Bal., Cranks only

CM-456D-305-120
120"
125 LBS.
8492RX
6,495

CM-320D-305-100
100"
400 LBS.
8492RX
8,015

4 No. 0RO Counterweights

4 No. 0R00 Counterweights
4 No. OAS Aux. weights
4 No. 1R0 Counterweights
4 No. 1S Aux. weights
8 No. 1S Aux. weights
4 No. 2RO Counterweights
4 No.2S Aux. weights
8 No. 2S Aux. weights
4 No. 3CRO Counterweights
4 No. 3BS Aux. weights
8 No. 3BS Aux. weights
4 No. 5ARO Counterweights
4 No. 5A Aux. weights
8 No. 5A Aux. weights
4 No. 5CRO Counterweights
4 No. 5C Aux. weights
8 No. 5C Aux. weights
4 No. 6RO Counterweights
4 No. 6 Aux. weights
8 No. 6 Aux. weights
4 No. 7RO Counterweights
4 No. 7 Aux. weights
8 No. 7 Aux. weights

MAX.
21,145
19,075
22,970
16,265
19,270
22,275
14,770
17,735
20,700
13,195
16,085
18,975
11,430
13,410
15,390

MAX.

19,695
23,285

17,910
21,455
25,000
16,025
19,480
22,935*
13,915
16,280
18,645*

* Use only one Aux. weight per counterweight on belt cover side.

MIN.
8,105
6,875
6,990
6,605
6,640
6,675
6,500
6,505
6,510
6,205
6,080
5,955
5,820
5,550
5,280

MIN.

8,150
8,190

8,025
8,030
8,035
7,665
7,515
7,365
7,210
6,885
6,560

CM-228D-246-86
86"
630 LBS.
8478RX
5,960

MAX.

13,540
16,810

11,630
13,905
16,180
10,140
12,205
14,270
9,220
10,450
11,680
8,045
8,970
9,895

MIN.

5,430
5,200

4,885
4,455
4,025
5,155
4,755
4,355
5,285
5,030
4,775
5,495
5,290
5,085

CM-160D-173-74
74"
700 LBS.
7278RX
6,770

MAX.

13,225
15,815
17,110
11,530
13,880
15,055*
10,480
11,880
13,280
9,140
10,195
11,250

MIN.

5,550
5,060
4,815
5,850
5,395
5,170
6,000
5,710
5,420
6,240
6,005
5,770

39

OILFIELD PRODUCTS GROUP

SLANT HOLE
PUMPING UNITS

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

Slant Hole Pumping Units

These units are one of the latest examples of
Lufkin's capability to design and manufacture
rod pumping units that meet new or unusual
well specifications.
Developments in extended-reach, horizontal and
deviated drilling technologies have proven successful in helping operators tap into previously
hard to reach reserves. In order to efficiently produce oil from these unconventional deviated well
bores, a new generation of production equipment
has been required. As it has so often in response
to other special industry needs, Lufkin delivered an
effective rod pumping solution . . . the Lufkin Slant
Hole pumping unit. Each of these units can be
custom-built to meet individual well specifications.

40

The Slant Hole Unit is an example of Lufkin's ability to design and manufacture pumping units for special applications.

GEAR REDUCER AND LUBRICATION DATA

Lufkin designed and manufactured herringbone gears (double helical) have proven to be the
standard of excellence for pumping unit gear reducers. Herringbone gears are less sensitive to
mis-alignment and resist torque reversals better than other types of gears. Heavy-duty sleeve
bushings on the crankshaft and straight roller bearings on the high speed and intermediate shafts
need no adjustment at assembly or when field service is required. The nodular iron gears with
high strength alloy pinion used by most manufacturers of pumping units were pioneered by Lufkin
over thirty-two years ago. The rugged two-piece housing is manufactured specifically for oilfield
pumping applications.
Churchills precision-cut helical gears are encased in a strong, heavy-walled, cast-iron gear
reducer housing. For smaller, beam balanced pumping units, these gear reducers are the most
economical and reliable available. Incorporated into the high speed end of the gear reducer is
Churchills unique StepDown design, which minimizes shaft deflection and improves proper
gear meshing. Positive lubrication of the heat treated, nodular gears and steel alloy pinions is
ensured by a wiper-type system. A built-in sight gauge allows immediate visual inspection of the
oil level in the gear reducer housing. All tapered roller bearing cups are mounted in bearing carriers, a unique configuration which minimizes field replacement time and also prevents damage to
the housing should a bearing fail.

OILFIELD PRODUCTS GROUP

GEAR REDUCER
AND LUBRICATION DATA

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

Lufkin Gear Reducer Data

Gear
Reducer
Size
2560D
1824D
1280D
912D
640D
456D
320D
228D
160D
114D
80D
57D
40D
25D
16D

Peak Torque
Rating
(in. lbs.)
2,560,000
1,824,000
1,280,000
912,000
640,000
456,000
320,000
228,000
160,000
114,000
80,000
57,000
40,000
25,000
16,000

Gear
Ratio
34.53:1
28.33:1
28.05:1
28.72:1
28.60:1
29.04:1
30.12:1
28.45:1
28.67:1
29.40:1
29.15:1
29.32:1
29.20:1
28.90:1
35.7:1

Crankshaft Diameter
Sheave Pitch
Sheave
Conventional/Mark II
Diameter
Belt
(inches)
(inches)
Section
11.75
55, 68
12D
9/10.5
55, 68
10D
8.5/10.5
36, 68 / 35, 68
10C/8D
7/9*
33, 40, 48, 55.2 / 50, 55.2
6D/8C
7/9
22, 27, 33, 48, 55.4 / 24, 36, 44, 50, 55.6 5D/6C
7/9
22, 27, 33, 48 / 24, 36, 44, 50
4D/6C
6.44/8.5
24, 30, 36, 44, 47
5C
6/7
24, 30, 36, 41
4C
5.44/7
20, 24, 30, 36, 38
3C
4.44/6.44
20, 24, 30, 33.6
2C
4.44
20, 24, 30,
2C
4
20, 24, 27 / 20, 25, 27.6
2C/3B
4
20, 24 / 20, 23.3
2C/3B
3
18.4
2B
2.5
15.3
3A or 2B

* 10.5 for 912DS Mark II

Lufkin Double Reduction Gear Reducers

All Lufkin gear reducers have been designed to
exceed API and AGMA specifications. Lufkin is
authorized to display the API monogram and is
licensed under specification 11E. Lufkin precision-cut,
herringbone gears are encased in a strong, heavywalled, cast-iron gear reducer housing. Operating in
an oil bath ensures positive lubrication of the heattreated, nodular gears and steel alloy pinions. An oil
wiper system continuously supplies oil to the bearings. An oil gage dip stick allows easy inspection of
the oil level in the gear reducer housing. Special
features of these rugged oilfield reducers include:
Horizontally split gear housing designed for easy
field maintenance
Precision-cut Lufkin herringbone gears
All shafts forged from alloy steel, heat treated and
precision turned to tight tolerances
Oversized bronze bushings on crankshafts which
seldom require replacement
Positive lubrication system (no oil pumps required)

42

Sheave
Bore Dia.
(inches)
6.50
4.94
4.94
4.19
3.44
3.44
2.94
2.44
2.19
1.94
1.94
1.94
1.69
1.38
1.19

Gear Reducer
Oil Capacity
(gallons)
235
165
120
107
70
55
50
34
22
17
17
13
7
5
5

Gear
Design
Herringbone
Herringbone
Herringbone
Herringbone
Herringbone
Herringbone
Herringbone
Herringbone
Herringbone
Herringbone
Herringbone
Herringbone
Herringbone
Herringbone
Herringbone

Crankshaft
Bearings
Sleeve Bushings
Sleeve Bushings
Sleeve Bushings
Sleeve Bushings
Sleeve Bushings
Sleeve Bushings
Sleeve Bushings
Sleeve Bushings
Sleeve Bushings
Sleeve Bushings
Sleeve Bushings
Sleeve Bushings
Sleeve Bushings
Sleeve Bushings
Sleeve Bushings

Intermediate
& High Speed
Bearings
Straight Roller
Straight Roller
Straight Roller
Straight Roller
Straight Roller
Straight Roller
Straight Roller
Straight Roller
Straight Roller
Straight Roller
Straight Roller
Straight Roller
Straight Roller
Straight Roller
Straight Roller

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

GEAR REDUCER
AND LUBRICATION DATA

Lubrication Instructions
Gear Reducer. For temperatures down to 0F, use an
AGMA No. 5EP (ISO VG 220) premium mild extreme
pressure lubricant (preferably a sulphur-phosphorous
type) with rust and oxidation inhibitors and an antifoam agent. Pour point of the oil should be 5F or
lower. For temperatures down to -30F, use an AGMA
No. 4 EP (ISO VG 150) premium mild extreme pressure lubricant (preferably sulphur-phosphorous type)
with rust and oxidation inhibitors and an anti-foam
agent. Pour point of the oil should be -15F or less.
Do not use multi-viscosity oils.

OILFIELD PRODUCTS GROUP

In cold climates (lowest annual temperature down to

-30F), roller bearings (except tapered roller crank pin
bearings) should be lubricated every six months. Use
a premium NLGI No. 0 lithium soap base grease with
an extreme pressure additive and a base oil viscocity
equivalent to AGMA No. 5 (198-242 cst. at 40C). Do
not use soda soap grease.
Bronze bearings and tapered roller crank pin bearings should be lubricated as required to maintain oil
level by removing the fill plug and adding oil until the
reservoir is full. Use EP80 or EP90 extreme pressure
oil with an extreme pressure additive and a pour
point of -10F or lower.

If desired, units can be shipped with the gear

reducer filled with oil that complies with the above
specifications.
To obtain long life from a pumping unit reducer, it is
necessary that the oil be of suitable viscosity and
free from foreign material, sludge and water. Check
for possible dirt, sludge, water emulsion or other
forms of contamination every six months, or when
the reducer has been exposed to flooding. If the
lubricant has an abnormal appearance or smell,
consider replacement.
Structural Bearings. All structural bearings are
lubricated at the factory. However, structural bearings do require periodic relubrication.
In warm climates (lowest annual temperature above
0F), roller bearings (except tapered roller crank pin
bearings) should be lubricated every six months. Use
a premium NLGI No. 1 lithium soap base grease with
an extreme pressure additive and a base oil viscosity
equivalent to AGMA No. 7 (414-506 cst. at 40C). Do
not use soda soap grease.

As long as the oil is maintained at the proper level, the slow speed and high
speed gears dip in oil and provide continuous lubrication to the gear mesh.
Large oil wipers direct a flood of oil into oversized oil troughs which in turn
provide each individual bearing with more than adequate lubrication above
five SPM. Add high speed wipers below five SPM.

Bronze bearings and tapered roller crank pin bearings should be lubricated as required to maintain oil
level. Use an EP140 extreme pressure oil with an
extreme pressure additive and a pour point of +15F
or lower. If available, the use of a heavier oil (viscosity up to 6600 SUS at 100F) is recommended.

43

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

GEAR REDUCER
AND LUBRICATION DATA

OILFIELD PRODUCTS GROUP

Churchill Gear Reducer Data

Gear Reducer
Size
B-80
B-57
B-50
B-40
B-25
B-16
B-13
B-10
B-6.4

Peak Torque
Rating (in. lbs.)
80,000
57,000
50,000
40,000
25,000
16,000
13,000
10,000
6,400

Gear
Ratio
30.06:1
31.57:1
31.11:1
31.11:1
31.14:1
31.36:1
31.36:1
33.24:1
33.64:1

Sheave Pitch
Dia. (inches)
24
24
18.4
18.4
18.4
18.4
18.4
18.4
18.4

Sheave Belt
Section
4-B, 3-C
4-B, 3-C
3-B
3-B
2-B
2-B
1-B
1-B
1-B

Churchill Helical Gear Reducers

Lufkins Churchill brand gear reducers are also
designed to exceed API and AGMA specifications.
The precision-cut helical gears are encased in a
heavy-walled cast-iron housing built to the same
rugged standards as the larger Lufkin units. All
tapered roller bearing cups are mounted in bearing
carriers. This unique configuration minimizes field
replacement time and prevents damage to the housing should a bearing fail. Special features include:
Unique StepDown housing design, which minimizes shaft deflection and improves proper gear
meshing.
Positive lubrication by integral wiper system
Built-in oil level sight gauge
Precision-cut Lufkin helical gears
All shafts forged from high grade steel, heat treated
and precision turned to tight tolerances

Lubrication Instructions
The proper care and lubrication of your Churchill
brand pumping unit will assure many trouble-free
years of operation.
Gear Reducer. For temperatures down to 0F, use an
AGMA No. 5EP (ISO VG 220) premium mild extreme
pressure lubricant (preferably a sulphur-phosphorous
type) with rust and oxidation inhibitors and an antifoam agent. Pour point of the oil should be 5F or
lower. For temperatures down to -30F use an AGMA
No. 4 EP (ISO VG 150) premium mild extreme pressure lubricant (preferrably a sulphur-phosphorous
type) with rust and oxidation inhibitors and an antifoam agent. Pour point of the oil should be -15F or
less. Do not use multi-viscosity oils.

44

Gear Reducer Oil

Capacity (gallons)
13
13
4
4
2
1.5
1.5
1.25
1

Gear
Design
Helical
Helical
Helical
Helical
Helical
Helical
Helical
Helical
Helical

Crankshaft
Bearings
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller

Intermediate &
High Speed Bearings
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller

If desired, units can be shipped with the gear

reducer filled with oil that complies with the above
specifications.
To obtain long life from a pumping unit reducer, it is
necessary that the oil be of suitable viscosity and
free from foreign material, sludge and water. Check
for possible dirt, sludge, water emulsion or other
forms of contamination every six months, or when
the reducer has been exposed to flooding. If the
lubricant has an abnormal appearance or smell,
consider replacement.
Structural Bearings. All structural bearings are
lubricated at the factory prior to shipment. However,
structural bearings do require periodic relubrication.
The saddle, equalizer and crank pin bearings, in
warm climates (lowest annual temperature above
0F), should be lubricated with a premium NLGI
No. 1 lithium soap base grease with an extreme
pressure additive and a base oil viscocity equivalent to AGMA No. 7 (414-506 cSt. at 40C). In cold
climates (lowest annual temperature down to -30F),
use a premium NLGI No. 0 lithium soap base
grease with an extreme pressure additive and a
base oil viscosity equivalent to AGMA No. 5 (198242 cSt. at 40C). Do not use soda soap grease.
Each bearing assembly has a ground level grease
fitting for easy lubrication with a grease gun. The
bearing assemblies should be lubricated at six
month intervals. In some environments, more frequent lubrication may be required.

OPTIONAL EQUIPMENT
AND SPECIAL FEATURES

Pumping units contain a number of heavy rotating and

moving parts which constitute a safety hazard if not
properly installed and guarded. As a service to the
users of our pumping units, we offer several types of
ladders, safety guarding and various optional equipment which provide ease of operation and safety for
people, animals or assets.

OILFIELD PRODUCTS GROUP

OPTIONAL EQUIPMENT
AND SPECIAL FEATURES

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

Special Features
All Lufkin manufactured pumping units are widely
known for extra-heavy structural frames. Wide
flange beams provide a rugged structure that is
capable of withstanding extreme well loads. Heavy
steel risers and easy access bolting are standard
features on all units. Ladders are standard on all
larger structures. A wide variety of bases, prime
mover base extensions and elevated motor brackets
adapt easily to all well site conditions, engines and
electric motors.
The following pages highlight some of the special
features of Lufkin pumping units and a sampling
of optional equipment that can be provided per
customer requests.
Crank Balanced Unit Equalizer Bearing Assembly. Furnished with roller
bearings on all sizes. Cross-pin type connection to walking beam is utilized.

Center Bearing Assembly. Furnished with roller bearings on some C-114D

and all larger sizes.

Crank Pin Assembly. Furnished with roller bearings on some C-114D and all
larger sizes.

46

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

OPTIONAL EQUIPMENT
AND SPECIAL FEATURES

OILFIELD PRODUCTS GROUP

Foundation Anchor Nuts are suspended in
concrete forms before foundation is poured.
Provides flush foundation. Wide foot at base
of nut insures more than adequate holding
power. Available in the following sizes:
Bolt Diameter
(inches)

Length
(inches)

0.75
1.00
1.25
1.50

6
10
12
12

Flex-Shoe Brake. Provides much

greater holding capacity than the
Clam Shell type formerly used.
Smoother acting with no "grabbing." Positive stop pawl can be
engaged with notches in brake
drum to provide additional safety.
The pumping unit brake is not
intended as a safety stop but is
intended for operational stops only.
Fabricated Foundation Pads are available for use with all Mark II units
and those conventional units designed for "two point" mounting. The light
weight portable fabricated pads can be shipped with the pumping unit as
a convenience and cost saving feature. Once the pads are in place they
are filled with crushed rock or sand to add stabilizing weight.

Horsehead and Wireline

Assembly. Easily aligned with
polished rod without disconnecting well load. One-piece arc
plate is used for greater strength.
The 120 inch stroke length and
less units are furnished with rollback horseheads for ease of well
servicing.

Jackshaft Speed Reducer. In many older oil fields where hydrocarbon

recoveries are minimal, slowing down a pumping unit can lower a producer's
costs and increase his profits. With an additional speed-reduction ratio capable
of slowing the unit running speed to one or two strokes per minute, the
Jackshaft Speed Reducer helps maximize efficiencies. The Jackshaft simply
allows producers to keep their units running while lowering operating costs by
avoiding frequent starting and stopping. It reduces motor horsepower requirements. And it fights corrosion which results from downtime.

47

OILFIELD PRODUCTS GROUP

OPTIONAL EQUIPMENT
AND SPECIAL FEATURES

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

Conventional Pumping Unit and Prime Mover Bases

Wide Skid-UNISET base with Hi-Prime

bracket for Electric Motor
Wide Skid base with Hi-Prime bracket
for Electric Motor

Wide Skid base for

Slow Speed Engine

Wide Skid base for

Multi-Cylinder Engine

Jointed Base for Electric Motor

Jointed base for Slow Speed Engine

Jointed base for

Multi-Cylinder Engine
Stub Base with Hi-Prime Bracket for
Electric Motor

48

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

OPTIONAL EQUIPMENT
AND SPECIAL FEATURES

OILFIELD PRODUCTS GROUP

Mark II Pumping Unit and Prime Mover Bases

Mark II Base with Hi-Prime Bracket

for Electric Motor.

Mark II Jointed Base for Electric Motor.

Mark II Jointed Base for

Multi-Cylinder Engine.

Mark II Base with Stationary Rail for

Slow Speed Engine.

49

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

OPTIONAL EQUIPMENT
AND SPECIAL FEATURES

OILFIELD PRODUCTS GROUP

Guarding of Pumping Units

61" & 83" Type "W"
Crank Guards

61" & 83"

1" above
bottom
of base
Gate optional
at extra cost

Platform
Ladder

Plain
Ladder

48" Open Rail

Crank Guard

Caged
Ladder
Open
Rail

Lufkin ladders are designed to facilitate safe access to key parts of the
pumping unit structure. Our standard ladders conform to Lufkins interpretation of API RP11ER. Special application ladders can be manufactured to
your specifications.

Gate optional
at extra cost

24"

48"

Crank Guards are available for all Lufkin units. In most operating environments,
the 48" open-rail guards are considered minimum guarding for people who are
familiar with pumping units and are accustomed to servicing them. This type of
guard is intended to keep workers from accidentally wandering, or falling, into
the crank arm sweeps. The 61" and 83" wire-mesh guards should be specified
where more stringent safety considerations are preferred. Custom guards are
available to meet customer's individual requirements.
Belt Guards are furnished with each unit. They are designed to cover exposed
sheaves and belts and to provide a barrier between these items and people who
are familiar with the operation of pumping units. Replacement belt guards are
available from Lufkin.
Prime Mover Guards are designed to keep people who are familiar with the
operation of pumping units and engines from accidentally walking or fallng into
the flywheel. Guards are available from Lufkin.

Horsehead Guards are available from Lufkin. This guard is designed to

keep people who are familiar with the operation of pumping units from
accidentally wandering into the area below the horsehead and carrier bar.
This type guard is required where the horsehead or carrier bar descends to
7ft. or less from grade or work platform (refer to API11ER).

50

OILFIELD SERVICE CENTERS

Lufkin's Oilfield Service Group refurbishes and sells used pumping units, and provides
installation, field services, machine shop repair and new OEM parts. We guarantee the best
quality parts, the industrys most comprehensive service and the fastest turnaround available at competitive pricing.

OILFIELD PRODUCTS GROUP

OILFIELD
SERVICE CENTERS

Lufkins Oilfield Service Group refurbishes and sells

used pumping units, and provides installation, repair
and field maintenance services from a network of
pumping unit service facilities in the following locations:

Bakersfield, California
Glendive, Montana
Lovington, New Mexico
Oklahoma City, Oklahoma
Andrews, Texas
Denver City, Texas
Kilgore, Texas
Levelland, Texas
Snyder, Texas
Odessa, Texas
Casper, Wyoming
Duri, Indonesia
Salawa, Kuwait

Experienced manufacturing and field service personnel

provide a wide-variety of pumping unit services for oil
producers around the world including:

OEM replacement parts for Lufkin, Churchill and

American pumping units
Replacement parts for all brands of pumping units
Repair or rebuilding of damaged pumping units
Transportation of pumping units to and from
field locations
Inspection and preventive maintenance services
Manufacturing/supply of portable concrete bases

OEM Parts. Lufkin Industries is well stocked with a complete inventory of Lufkin, Churchill and American OEM
parts. All parts have been manufactured to the OEM
design requirements under the API-Q-1 quality program
for which few, if any, local machine shops qualify.

Repair Facilities. Lufkins Oilfield Service Group works

on all brands of units. Operating from well-equipped
service vehicles, experienced personnel make many
repairs in the field. Additionally, Lufkin maintains stateof-the-art repair facilities in strategic oilfield centers
throughout the oilfield.

52

P.O. Box 1594 (West State Rd. 114)

Levelland, Texas 79336
Phone: 806/894-2889
Fax: 806/894-2364
www.lufkin.com

Service Equipment. Lufkin operates a modern fleet of

specially equipped tandem winch trucks and cranes
designed to provide safe, effective service on pumping
units. To facilitate safe, efficient transportation of
pumping units to and from the field, Lufkin maintains a
variety of heavy-duty 2, 3, and 4 axle lowboy trailers.

Service and Parts Guarantee. Lufkin guarantees its products to be free from defects, to fit correctly and to give
unmatched performance and reliability when properly
installed. Our guarantee exceeds the oilfield industrys
standard equipment guarantees.

FIELD AUTOMATION
AND WELL OPTIMIZATION

Lufkin Automation is the industry leader in oil production automation and well
optimization products and services (pump-off controllers, dynamometers, fluid
level equipment, well analysis, design/analysis software, well design consulting
and training). With the acquisition of Delta-X and Nabla and with thousands of
controllers in service, Lufkin Automation continues the Lufkin tradition of helping
producers lower their production costs and optimize well efficiency.

AUTOMATION

FIELD AUTOMATION
AND WELL OPTIMIZATION

Lufkin Automation offers a complete line of fieldproven wellhead automation products, well analysis
equipment and software designed to increase operating performance, reduce lifting costs and maximize
returns on producing assets. From software to instrumentation and controls, we continue to lead in the
development of new, integrated solutions for oil producers worldwide.

Rod Pump Systems Design and Analysis Software

Decades of experience
providing well analysis as
a service to producers
are incorporated into the
design and diagnostic
software programs that
Lufkin has developed for
commercial applications.
Each of our Windowsbased programs is backed by online technical support. Technical training classes are available at our
Midland and Houston, Texas facility or offsite. Our
outstanding software products include:
The DIAG$$ wave equation diagnostic program
ascertains surface and subsurface operating
conditions in both vertical and deviated rod
pumping wells.
PIP$$$ diagnostic software analyzes downhole
dynamometer cards to determine the potential for
additional production.
The PIVOG$ design tool models the amount of
pump capacity required to lift desired surface
volumes in relationship to varying levels of pump
leakage and gas interference.
The DYNOII diagnostic program, used in conjunction with a Lufkin digital dynamometer, is a
valuable tool for analyzing surface data, checking
valve status and measuring counterbalance.
CBAL$$ design software systemically calculates
the best weight placement for balancing crankbalanced pumping units. Time-consuming trial
and error is eliminated.
The SROD$$ wave equation design program
predicts equipment loading, pump capacity,
power consumption and other equipment behaviors for vertical and deviated wells, and suggests
ways to improve production efficiencies.

54

11375 W. Sam Houston Pkwy.

Houston, TX 77031
Phone: 281/495-1100
Fax: 281/495-6333

Fluid Level Instruments

Lufkin supplies two basic fluid level instruments: the
Ventawave Fluid Level Instrument and the Delta-X
DXT-01 Acoustical Well Sounder. Both provide operators with fast, accurate well fluid-level information.
The Ventawave Fluid Level Instrument is our
latest innovation. A transient pressure wave is sent
through a length of coiled tubing to measure external acoustic
velocity. A
second wave
is resonated
through the
casing. By
extrapolating
the time it
takes the transient wave to travel to the fluid level and back with
the known acoustic velocity, the depth-to-fluid is
accurately determined. Ideally used with a Lufkin
dynamometer, the instrument is comprised of simple, off-the-shelf components.
The DXT-01 Acoustical Well Sounder is a simple
and user-friendly fluid level instrument. Compact,
lightweight and portable, our exclusive DXT-01 is
particularly well suited for years of dependable
service in deep, small-annulus, low-pressure wells.
A unique noise suppression circuit enables shots to
be pinpointed with amazing accuracy.

Dynamometers
Lufkin also manufactures a complete line of easy-touse dynamometers featuring load, position, RPM and
current transducers that accurately, quickly and
cost-effectively analyze well conditions, troubleshoot
mechanical problems and provide onsite evaluation
of a wells production potential.
The PAII Digital Dynamometer interfaces a personal computer to load, position, RPM and current
transducers via a
RS-232 serial port.
Lightweight and
portable, the unit is
powered by 12v DC.
Optional software allows
users to perform complete wellsite analysis.

11375 W. Sam Houston Pkwy.

Houston, TX 77031
Phone: 281/495-1100
Fax: 281/495-6333

FIELD AUTOMATION
AND WELL OPTIMIZATION

The DXD-03 Dynamometer System is engineered to assess the condition of beam pumping
systems. A recorder/plotter component electronically scales charts for at-a-glance assessments.
Optional current transducers will plot motor
amperage.

Rod Pump Controls

AUTOMATION

Dynagraph cards store valuable information such

as percent run time history, counterbalance and
time on/time off plots for later retrieval and comparison. And, the controller is easily integrated
with most third-party SCADA software packages.
The PCM (Pump Card Monitor) is the only downhole card controller in the industry. Its patented

Lufkin Automation is the leading developer of

patented rod pump control technologies. We offer a
number of solutions with which to automate and
increase production, and dramatically lower lifting
and maintenance costs . . . and improve profits.
The MPC Multipurpose Rod Pump Controller is
the most flexible, accurate control product on the
market. Its patented single setpoint control pre-

cisely determines pump-off. Lufkins DX-PRO

analysis software automatically calculates optimal
run time and downtime, matching pump performance to reservoir characteristics. A unique Inferred
Production Algorithm measures fluid production
stroke-by-stroke, quantifying production daily,
regardless of meter location. And, patented
autozero circuits automatically compensate for
temperature changes and beam fluctuations,
ensuring accurate rod loads.

method calculates a downhole card from the surface card and monitors the liquid fill to determine
pump-off. A back up control method uses motor
power derived from the speed of the pumping unit
in case of a load transducer failure. In addition, a
variable speed drive can be used in conjunction
with the PCM for continuous control. The PCM
adjusts the pumping speed to maintain preset fill.
Additional features include a motor stall protection,
belt slippage and calculated production. As with
the MPC, the PCM uses a MODBUS protocol for
easy integration with SCADA software packages.
The NABLA OPTIMIZER Economy Rod Pump
Controller offers producers a third, simpler control option. This very affordable, low-maintenance
product cost-effectively maximizes the efficiency

Additionally, the MPC rod pump controller incorporates Lufkins proven dynamometer technology, providing ongoing, real-time analysis and facilitating
troubleshooting.
Plus, the MPC controller has a built-in, quantitative
dynamometer system that continuously monitors
and analyzes pumping dynamics. A unique operator interface with a user-friendly keypad graphically displays detailed, real-time well information.

55

AUTOMATION

FIELD AUTOMATION
AND WELL OPTIMIZATION

of marginal wells by turning the pumping unit on

only when the pump is filling. Power requirements
and the adverse effects of fluid pound are significantly minimized.
The Optimizer controller is capable of recording
and displaying runtime over the last 72-hour run
period, providing operators with the means to
detect changes in mechanical or reservoir conditions. Because the product requires no traditional
position transducers or expensive load cells,
downtime due to load-cell, cable or circuit problems is eliminated.

11375 W. Sam Houston Pkwy.

Houston, TX 77031
Phone: 281/495-1100
Fax: 281/495-6333

SCADA Remote Management Systems Software

Lufkin Automations Management Systems Software
are fully functional NT based supervisory data acquisition and control (SCADA) software packages. Our
SCADA products feature integrated modules that
provide real-time remote control and monitoring;
automatic data recording, scheduled reporting,
trending, plotting and polling; and voice callout.

Remote Terminal Units (RTUs)

To improve customers productivity, Lufkin offers
products that enable operators to remotely and reliably monitor and control producing wells.
MPC Injection Well Monitors (IWM) help prevent
reservoir damage and maintain optimum levels of
production by monitoring
the volume and pressure
of water injected into
maturing oilfields. Radiooperated, IWMs may be
specified with either a
standard power supply
or solar power panels,
and with or without a display/key pad, depending
on customer needs.
MPC Progressive Cavity Pump Controllers
(PCP) protect critical pump components from the
wear and tear associated with excessive torque,
and ensure that optimum fluid levels are maintained in the well. Production flow rates are accurately measured using turbine meter pulse input,
and pump motor speed is effectively controlled via
an analog input- and output-generated algorithm.

56

Network capabilities enable multiple users to securely

and safely access, select and view multiple servers
via modem or network on a single screen. Simple,
point-and-click graphical interface packages display
overviews of automation systems, layout schematics
and field drawings. Easy to navigate, the package
requires minimal training.

ARTIFICIAL LIFT AND OILFIELD

AUTOMATION TRAINING

In response to customers requests, Lufkin has developed and conducts

on a regular basis two industry specific training programs.
Pumping Unit Operation and Maintenance Training Schools
Oilfield Automation School

OILFIELD PRODUCTS GROUP

ARTIFICAL LIFT AND

OILFIELD AUTOMATION TRAINING

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5363
Fax: 936/633-3563
e-mail: [email protected]

Pumping Unit Operation and

Maintenance Training Schools

Lufkin Oilfield
Automation Schools

Keeping field equipment maintained and operating

efficiently is essential to the profitability of oil producers. Lufkins Pumping Unit Operation and
Maintenance Training School was first offered in 1987
in response to oil industry demand. This popular training program was developed by industry veterans to
specifically teach oilfield production personnel how to
keep pumping units properly maintained and operating efficiently. During all instructional sessions, proper
safety procedures are stressed.

Lufkin Automation schools are conducted by professional well analysts who also enjoy teaching.

This 4-day school is conducted at Lufkin Industries

Factory Training Center in Lufkin, Texas. Class sizes are
no larger than 16 to 18 people in order to permit personalized instruction. Veteran Lufkin employees, who have
first-hand experience with the operation and maintenance of oilfield pumping units, conduct all classroom
and hands-on sessions which include:

Setup and operation of a pumping unit

Counterbalance adjustments
Lubrication procedures and requirements
Stroke changes
Structural bearing assembly and disassembly
Preventive maintenance procedures
Safety procedures
Tour of manufacturing facilities

Technical calculations for equipment selection are not a

regular part of this course, but are available on request.

Courses are offered on many subjects including:

Rod pumping systems

Submersible electric pumping systems
Subsurface hydraulic pumping systems
Computer analysis of rod pumped wells
Pump-off control technology
Principles of well weighing

Instructors. Mr. Ken Nolen, co-founder of Nabla and

formally with Shell Oil Company, has worked as
a production engineer, production foreman and engineering section leader. Ken has authored numerous
technical papers on artificial lift technology and has
taught classes on these subjects throughout the world.
Ken received a B.S. in Mechanical Engineering from
Texas A&M University, is a member of SPE and Tau
Bata Pi and is a Registered Engineer.
Mr. Fred Morrow served as engineering manager and
research associate for Fiberflex. Fred developed production and optimization methods used by Fiberflex
and others relating to rod-pumped completions. Fred
received a B.S. in Industrial Engineering from Texas
A&M University and is a member of SPE. He has
authored numerous papers on artificial lift technology
and has taught related courses throughout the world.
Fred is a Registered Engineer.

The course is offered several times during the spring

and autumn months of each year. Cost is $600 per
person and includes all training materials, local transportation, noon meals, a banquet dinner and a certificate of completion. Contact Lufkin Industries for local
hotel recommendations.

In addition to our scheduled schools, Lufkin Automation

offers schools tailored to meet the specific needs of the
customer. These special schools can be taught at the
Lufkin Automation training facilities in Midland or at the
customer's preferred location.

For additional information regarding schedules or

registration, contact:

Several courses are offered each year in our facilities

or at customer locations. For more information, contact:

Ms. Linda Coulter

Lufkin Industries, Inc.
P.O. Box 849
Lufkin, TX 75902-0849
Telephone: 936/637-5363
Fax: 936/633-3563
E-mail: [email protected]

Mr. Andy Cordova

Lufkin Automation
P.O. Box 1485
Houston, TX 77251-1485
Telephone: 281/495-1100
Fax: 281/495-6333
E-mail: [email protected]

58

ARTIFICIAL LIFT NOMENCLATURE

AND APPLICATION FORMULAS

OILFIELD PRODUCTS GROUP

ARTIFICIAL LIFT NOMENCLATURE

AND APPLICATION FORMULAS

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

Conventional Pumping Unit

& Reverse Mark Nomenclature
HORSEHEAD
WALKING BEAM
CENTER BEARING
EQUALIZER BEARING
CAGED LADDER

EQUALIZER
PITMAN ARM
WIRELINE
CARRIER BAR
CRANK
CRANK PIN BEARING
BRAKE
COUNTERWEIGHT
PRIME MOVER
SAMSON POST
BRAKE LEVER

BASE
GEAR REDUCER (not visible)

Mark II Pumping Unit Nomenclature

HORSEHEAD
CROSS YOKE
CROSS YOKE BEARING (not visible)
WALKING BEAM
SAMSON POST BEARING ASSEMBLY
PITMAN ARM
ANGLE BRACE

COUNTERWEIGHT

SAMSON POST
WIRELINE
CRANK
CARRIER BAR
BRAKE
GEAR REDUCER
PRIME MOVER
CRANK PIN BEARING
BRAKE LEVER
PLATFORM LADDER
BASE

60

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

ARTIFICIAL LIFT NOMENCLATURE

AND APPLICATION FORMULAS

OILFIELD PRODUCTS GROUP

Air BalancedI Pumping Unit Nomenclature

HORSEHEAD
AIR TANK BEARING
EQUALIZER BEARING
EQUALIZER
WALKING BEAM

SAMSON POST BEARING ASSEMBLY

AIR TANK
WIRELINE
CARRIER BAR
LADDER
PITMAN ARM
ANGLE BRACE
PISTON ROD
SAMSON POST
CRANK PIN BEARING
BRAKE
CRANK
BASE
GEAR REDUCER (not visible)
AIR COMPRESSOR ASSEMBLY (not visible)
PISTON ROD SEAT HOUSING (not visible)

Pumping Unit Model Number Designations

C-228D-246-86
*Type of Pumping Unit
Gear Reducer Peak Torque Rating (thousands of inch lbs.)
Double Reduction Gear Reducer
Polished Rod/Structure Load Rating (hundred lbs.)
Maximum Stroke Length (inches)
Pum
*Key
for Type of Pumping Unit
A
B
C
CM

=
=
=
=

Air Balanced
Beam Balanced
Conventional (standard)
Conventional (portable)

M
LP
RM
LC

=
=
=
=

Mark II Unitorque
Low Profile
Reverse Mark
Power Lift

WARNING: Using repair or replacement parts on any Lufkin Pumping

Unit that do not meet Lufkin specifications could result in equipment
damage and/or serious injury to personnel near the unit. Before performing maintenance or inspection on any pumping unit, be certain the
prime mover is turned-off, locked and tagged in the off position; and
be certain the cranks are secured against rotation. Any movement of
the equipment during maintenance or inspection procedures can cause
serious personal injury.

61

OILFIELD PRODUCTS GROUP

Useful Formulas

Belt Length
Formula:

Strokes per Minute

PL = 2CD + 1.57(D + d) +

Formula:

Example:

RPM d
SPM =

R
D

1170 12
SPM =

= 9.9
30.12 47

Where:

RPM
R
d
D

=
=
=
=

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

ARTIFICIAL LIFT NOMENCLATURE

AND APPLICATION FORMULAS

1170 Revolutions per minute of prime mover

30.12 (320D Gear Reducer)
12" Pitch Diameter of Prime Mover Sheave
47" Pitch Diameter of Gear Reducer Sheave

(D - d)

4 CD

Example:

PL = 2 66.21 + 1.57(47 + 14.5) +

Where:

(47 - 14.5)

4 66.21

= 232.96 inches

CD = 66.21 inch Center Distance of Shafts

D = 47 inch Pitch Diameter of Gear Reducer Sheave
d = 14.5 inch Pitch Diameter of Prime Mover Sheave

Use nearest belt size available depending on type of sheaves selected.

Prime Mover Sheave Diameter
Formula:

d=

Example:

SPM R D
RPM

Where:

SPM
R
D
RPM

=
=
=
=

d=

12 30.12 47
= 14.5 inches
1170

12 Strokes per Minute

30.12 Ratio (320D Gear Reducer)
47" Pitch Diameter of Gear Reducer Sheave
1170 Revolutions per Minute of Prime Mover

Use nearest size available depending upon belt section and number of
grooves in sheave.

Horsepower of Prime Mover (these values are approximate)

Formula A:

Formula B:

BPD Depth
HP =
56000

HP =

Example: Assumes high slip (Nema D) motor.

HP =

217 5600
= 21.7 (use 25 HP motor)
56000

Where:
Belt Velocity
Formula:

v=

p d RPM
12

Where:

v=

BPD Depth
45000

BPD = 217 @ 100% pump efficiency

Depth = 5600 feet, pump setting

Example:

Formula A: for high slip (Nema D) electric motors and slow speed engines.
Formula B: for normal slip electric motors and multi-cylinder engines.

3.1416 14.5 1170

= 4441 FPM
12

Multiply HP by 0.8 for Mark II units.

d = 14.5 inch Pitch Diameter

RPM = 1170 Revolutions per minute of Prime Mover

Maximum Strokes per Minute (based on the free fall speed of the rod)

Limit between 2000 and 5000 feet per min. (FPM)

Formula:

Belt Velocity less than 2000 FPM results in poor belt life. Belt Velocity
greater than 5000 FPM requires dynamically balanced sheaves.

Conventional Units:

Center Distance
Formula:

Air Balanced Units:

Mark II Units:

Example: Assumes a C-320D-256-100 Conventional Unit.

SPM = .7

60000
L

SPM = .7

60000
= 17.15 SPM Maximum
100

SPM = .63

60000
L

SPM = .56

60000
L

Also:
2

V
CD = U + + ( AB - b)

VV
UU +
+ ( AA - b)

Example: Assumes Hi-Prime Electric Motor Driven C-320D-256-100 Conventional Unit

2

33.25
CD = 31 +
+ ( 54 - 8)

Where:

62

UU
VV
AA
b

=
=
=
=

= 66.21 inches

31 (see General Dimensions)

33.25 (see General Dimensions)
54 (see General Dimensions)
8 (assume 25 HP, Frame 324T Motor)

Definition of Symbols Used

SPM = Strokes per Minute
RPM = Revolutions per Minute of
Prime Mover
FPM = Feet per Minute
R = Gear Reducer Ratio
D = Gear Reducer Sheave Pitch
Diameter, inches
d = Prime Mover Sheave Pitch
Diameter, inches
v = Belt Velocity, Feet per Minute
= 3.1416 (Pi)
PL = Belt Pitch Length, inches
CD = Shaft Center Distance, inches
U = see General Dimensions

V
AB
UU
VV
AA
b

=
=
=
=
=
=

HP =
BPD =
Depth =
L =

see General Dimensions

see General Dimensions
see General Dimensions
see General Dimensions
see General Dimensions
Prime Mover Backing (vertical
distance from mounting feet to
center of shaft), inches
Horsepower
Barrels per Day at 100% Pump
Efficiency
Pump Setting, feet
Stroke Length, inches

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com

ORDERING INSTRUCTIONS
AND WARRANTIES

OILFIELD PRODUCTS GROUP

ORDERING INSTRUCTIONS
To size and/or order a Lufkin pumping unit, contact the nearest Lufkin representative or sales office. When ordering replacement
parts, be sure to include the unit model number, unit serial and order number, a complete part description and, if known, the
casting number or part number.
LIMITED WARRANTY
ALL NEW LUFKIN INDUSTRIES, INC. (LUFKIN) oilfield machinery and equipment (products) are sold by LUFKIN or its dealer upon the following warranty
and agreement given by LUFKIN or its authorized dealer. THE WARRANTIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES
AND CONDITIONS WHETHER STATUTORY, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, AND WARRANTIES ARISING FROM COURSE OF DEALING, USAGE, OR TRADE and are exclusive and in lieu of any other obligation on the part
of LUFKIN or its authorized dealer. LUFKIN neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of such
products. The obligation of LUFKIN or its authorized dealer under this warranty, is limited to the following:
LUFKIN warrants to the ORIGINAL PURCHASER (PURCHASER) of the pumping unit, subject to the conditions herein stated, that the pumping unit shall be,
upon delivery, free from manufacturing defects. This Warranty shall run for a period of three (3) years from the date of shipment from LUFKINs plant. In the
event the pumping unit fails to operate properly due to a manufacturing defect (or) a manufacturing defect is discovered during the warranty period, LUFKIN
shall only be obligated to repair or replace the pumping unit, at LUFKINs option, free of charge, F.O.B. LUFKINs plant, or other designated place of repair or
replacement. Repair or replacement by LUFKIN shall not extend the warranty period. LUFKIN will have no liability under this Warranty unless LUFKIN receives
written notice from PURCHASER of the defect within thirty (30) days after discovery of the defect. LUFKIN may waive the requirement of written notice and
accept oral notice of a timely reported defect. LUFKIN shall not be liable under this Warranty and this Warranty will be null and void if the pumping unit, or any
part thereof, was damaged, subjected to abuse, altered, misused or if the pumping unit, or any part thereof was improperly stored, installed, maintained, repaired
or operated. Repair or replacement of the pumping unit, or any part thereof, shall fulfill all obligations of LUFKIN. The Warranty provided in this paragraph is
subject to the following exceptions.
LUFKINs warranty is limited to one (1) year (subject to the terms and conditions stated above) with respect to parts that are subject to wear under normal operating conditions (including, but not limited to contact type oil or grease seals, hoses, belts, elastomeric parts, wireline, brake lining, brake cables, gears, etc.).
LUFKIN extends no warranties with respect to the design of the pumping unit or the component parts, materials or accessories manufactured, furnished or supplied by individuals or entities other than LUFKIN (including, but not limited to prime movers, compressors, valves, electrical components, etc.). LUFKIN agrees
that any warranty which is given to LUFKIN on such components by the manufacturer thereof shall be extended to the PURCHASER but only to the extent permitted by the terms of such warranties.
The remedies provided above are the exclusive remedies of PURCHASER for failure of LUFKIN to meet its warranty obligations, whether claims of PURCHASER
are based on contract, in tort (including negligence) or otherwise. Upon expiration of the applicable warranty period, all obligations of LUFKIN for breach of warranty will terminate. The provisions of this Warranty shall be governed in accordance with the laws of the State of Texas.
Subject to and without waiving the foregoing, Purchaser agrees that neither LUFKIN, nor its affiliates, vendors, suppliers, agents, or subcontractors, either individually or jointly, shall be liable to PURCHASER, its affiliates, or any other person or entity whether due to LUFKINs negligence or otherwise, and will not be
responsible to PURCHASER in contract, in tort (including negligence) or otherwise for loss of use of equipment or plant, loss of profits or revenues, claims of
any customers of PURCHASER, or any special, indirect, incidental or consequential loss of damage whatsoever. The obligation of LUFKIN arising out of the
work performed hereunder, will be limited to remedies under the limited warranty set forth above. IN NO EVENT SHALL THE PURCHASER OR ANY OTHER
PERSON OR ENTITY BE ENTITLED TO RECOVER FOR INDIRECT, SPECIAL, EXEMPLARY, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING
BUT NOT LIMITED TO INCONVENIENCE, RENTAL OF REPLACEMENT EQUIPMENT, LOSS OF PROFITS OR OTHER COMMERCIAL OR ECONOMIC
LOSS.
PURCHASER agrees to protect, defend, indemnify and save LUFKIN, its subcontractors and affiliates and their employees performing services under this
Agreement harmless from and against all liabilities, loss, expense, claims, demands, and causes of action of every kind and character arising out of or in connection with this Agreement, or the work to be performed hereunder, without limit and without regard to the cause or causes of action thereof OR THE NEGLIGENCE OF ANY PARTY OR PARTIES, INCLUDING LOSSES ATTRIBUTABLE TO LUFKINs NEGLIGENCE, arising in connection herewith in favor of PURCHASER or third parties on account of bodily injury, death or damage to property.
PURCHASER agrees that whenever any representative of LUFKIN shall be on the premises of PURCHAER or at any place other than LUFKINs facility, for the
purpose of inspecting, repairing or servicing of the equipment sold herewith, the PURCHASER shall indemnify and hold LUFKIN harmless from all claims, suits
or actions arising from or growing out of the inspecting, repairing or servicing of such equipment and from all expenses of defending against such claims, suits
or actions.
PURCHASER acknowledges and agrees, on its own behalf and on the behalf of its assigns and successors, that the Texas Deceptive Trade Practices
Consumer Protection Act, Subchapter E of Chapter 17 of the Texas Business and Commerce Code (the DTPA), is not applicable to this transaction. As such,
PURCHASERs and LUFKINs rights and remedies with respect to this transaction, and with respect to all acts or practices of the other, past, present or future,
in connection with this transaction, shall be governed by legal principles other than the DTPA. Accordingly, PURCHASER acknowledges and agrees as follows:
PURCHASER HEREBY IRREVOCABLY WAIVES, TO THE FULL EXTENT PERMITTED BY LAW, ANY AND ALL RIGHTS AND CLAIMS THAT PURCHASER
MAY NOW HAVE, OR TO WHICH IT MAY OTHERWISE IN THE FUTURE HAVE BEEN ENTITLED, UNDER THE TEXAS DECEPTIVE TRADE PRACTICES
CONSUMER PROTECTION ACT, TEX. BUS. AND COM. CODE 17.41 ET SEO., (DTPA), ARISING OUT OF ANY ACT, CONDUCT, REPRESENTATION
OR OMISSION OF LUFKIN, ITS EMPLOYEES OR AGENTS, HERETOFORE OR HEREAFTER TAKEN, DONE OR OMITTED TO BE DONE IN CONNECTION
WITH THIS TRANSACTION OR SUBSEQUENT RELATED TRANSACTIONS.

63

OILFIELD PRODUCTS GROUP

CORPORATE OFFICES
P.O. Box 849
Lufkin, TX 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
e-mail: [email protected]
www.lufkin.com
DOMESTIC SALES & SERVICE
Andrews, TX 79714
P. O. Box 12
2340 North US 385
Phone: 915/523-3836
Fax: 915/523-3972
Bakersfield, CA 93308
2500 Parker Lane
Phone: 661/327-3563
Fax: 661/327-0690
Casper,WY 82601
610 N. Warehouse Road
Phone: 307/234-5346
Fax: 307/472-0723
Denver City, TX 79323
P.O. Box 1350, Hwy 214
Phone: 806/592-2586
Fax: 806/592-3425
Glendive, MT 59330
173 Drycreek Road
Phone: 406/687-3672
Fax: 406/687-3772
Houston, TX 77024
9821 Katy Frwy, Ste. 900
Phone: 713/468-7804
Fax: 713/468-6880
Kilgore, TX 75662
P. O. Box 3095
1-20 & Hwy 42
Phone: 903/984-3875
Fax: 903/984-2449
Levelland, TX 79336
P. O. Box 1594
West State Road 114
Phone: 806/894-2889
Fax: 806/894-2364
Lovington, NM 88260
P. O. Box 40, Artesia Hwy
Phone: 505/396-2620
Fax: 505/396-5298
Odessa, TX 79766
P. O. Box 1632 (79760)
13400 W. Hwy 80
Phone: 915/563-0363
Fax: 915/561-8203
Oklahoma City, OK 73143*
P. O. Box 95205
2300 South Prospect
Phone: 405/677-0567
Fax: 405/677-7045
2000 Lufkin Industries, Inc.

SALES AND SERVICE

LOCATIONS
LUFKIN AUTOMATION
Bakersfield, CA 93308
2500 Parker Lane
Phone: 661/322-6944
Fax: 661/327-0690
Houston, TX 77251 (Plant)
P.O. Box 1485
11375 West Sam Houston Pkwy.
Ste. 800 (77031)
Phone: 281/495-1100
Fax: 281/495-6333
Midland, TX 79703
2064 Market Street
Phone: 915/697-2228
Fax: 915/697-0192

Venezuela (Sales)
LUKIVEN, S.A.
Circunvlacion #2, #111A-250
Frente Al Hotel Maruma
Maracaibo, Venezuela
Phone: 58-61-360289
Fax: 58-61-360087
Venezuela (Plant)
LUFKIN de Venezuela, S.A.
(LUFSA)
Carretera a Perija Km. 15
Apartado 10392
Maracaibo, Venezuela
Phone: 58-61-360784
Fax: 58-61-592241

REPRESENTATIVES/DISTRIBUTORS
INTERNATIONAL LOCATIONS
Argentina (Sales)
LUFKIN Argentina S.A. (LASA)
Reconguista 656 6th Floor A.
(1003) Buenos Aires, Argentina
Phone: 54-11-4315-1641
Fax: 54-11-4311-8181
Argentina (Plant)
Parque Ind. Comodoro Rivadavia
Maclzo 3, Casilla de Correo 104
(9000) Comodoro Rivadavia
Chubut, Argentina
Phone: 54-11-967-481-30750
Fax: 54-11-967-482-32735
Canada (Sales)*
Lufkin Industries Canada Ltd.
225 McDougall Place #1050
808-4th Avenue S.W.
Calgary, Alberta T2P 3E8
Phone: 403/234-7692
Fax: 403/265-6913
Canada (Plant)
1107-8th A Street
Nisku Industrial Park
Nisku, Alberta T9E 7R3
Phone: 403/955-7566
Fax: 403/955-3359
Indonesia (Plant)
PT LUFKIN Indonesia
Jl. Tenggiri Kav. 21
Batu Ampar
Pulau Batam, Indonesia
Phone: 62-778-412242
Fax: 62-778-412283
Kuwait
Flat B1, Bldg. 147
Street, Block 4
Salawa, Kuwait
Phone: 965-562-0541
Fax: 965-562-0541
Russia
UI. Mikluho-Maklaya,
House 38, Apt. 112
Moscow, Russia 117279
Phone: 70-95-429-1228
Fax: 70-95-429-1228

Africa (North & Central) and France

D.I.M.A.P.E.
42, bis rue de lEst
92100 Boulogne, Billancourt, France
Phone: 33-14-605-8200
Fax: 33-14-603-4799
Z.I. Iduspal B.P.118
64143 Lons Cedex, Pau, France
Phone: 33-55-962-0162
Fax: 33-55-962-0730
Africa (for water wells)
ICWACO Ltd.
Eryl Mor House4
Beach Rod Penmarnmawr
Conway LL346AY Wales
Phone: 44-1492-622-307
Fax: 44-1492-623-464

P.O. Box 849 (Hwy 69S & FM 326)

Lufkin, Texas 75902-0849
Phone: 936/637-5437
Fax: 936/633-3563
www.lufkin.com
Indonesia
PT. IMECO
Jl. Ampera Raya no. 9-10
Jakarta 12550 Indonesia
Phone: 62-21-780-8068
Fax: 62-21-780-8055
Kuwait
Safwan Trading & Contracting
3rd Industrial Estate
Parcel 101, Block D Street 67
Shuwaihk, Kuwait
Phone: 965-481-1606
Fax: 965-484-2454
Mexico
Cables Y Accesorios Del Sureste,
S.A.De C.V.(CABSA)
Francisco Marquez No. 143
Col. Condesa, 06140, Mexico
Phone: 525-211-2666
Fax: 525-211-6097
Oman
Oman Oilfields Supply Centre L.L.C.
P. O. Box 1160, Ruwi, Postal Code 112
Sultanate of Oman
Phone: 968-602-044
Fax: 968-699-730
Trinidad
Industrial Agencies Limited
18 Lady Hailes Ave.
San Fernando, Trinidad W.I.
Phone: 868-657-8561
Fax: 868-652-0884
Terran Persad Industrial Estate
La Romain, Trinidad, W.I.
Phone: 868-653-4264
Fax: 868-653-4320

Australia and New Zealand

Bayliss Energy Services
163 Park Road, Yeerongpilly,
Queensland, 4105, Australia
Phone: 61-73892-5270
Fax: 61-73892-2240

Turkey
Agrimpex, Inc.
10600 Fallstone Road
Houston, TX 77099 U.S.A.
Phone: 281/530-9858
Fax: 281/530-9613

Austria, Hungary and Czechoslovakia

Premaberg Industrieanlagen Gesellschaft
M.B.H.
A-2362 Biedermannsdorf
Josef Madeersperger Str. 3, Austria
Phone: 43-2236-76265-33
Fax: 43-2236-76265-6

Sub-Agent: Insmak
1570 Sokak No. 17/301
35110 Cinarli
Izmir, Turkey
Phone: 90-232-486-2813
Fax: 90-232-461-0130

Brazil
Cotema Equipamentos Eqecas Ltda.
Rua Carlos Vicari, 317 Ague Branca
05033-070 Sao Paulo/SP Brasil
Phone: 55-11-3872-3922
Fax: 55-11-3862-0697

United Kingdom
Edward H. Mills Associates
2, Fernhill, Oxshott,
Surrey, KT22 OJK, England
Phone: 441-37-284-3067
Fax: 441-37-284-3067
Venezuela

Colombia
Lukiven Columbia Ltd.
Avenida 15, No. 129-52, Casa 1
Bogota, Colombia, S.A.
Phone: 57-1-626-2549
Fax: 57-1-259-4866

Venezuela
Lukiven, S.A.
Carretera Negra KM 1000
Anaco, Venezuela
Phone: 58-82-23989
Fax: 58-82-23062

Egypt
Tawakol Enterprises
70, El Thawra Street
Heliopolis, Cairo, Egypt 11341
Phone: 20-2-291-6482
Fax: 20-2-291-7985

* Also includes Lufkin Automation

Printed in U.S.A.
CC2-2000 3M