Scribd
Upload
697 views4 pages

Verilog: A Simple UpDown Counter Implemntation

A simple Up Down Counter implementation in verilog. If the state is Count Up the device will count up else count down.

Uploaded by

Bangon Kali
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
697 views4 pages

Verilog: A Simple UpDown Counter Implemntation

A simple Up Down Counter implementation in verilog. If the state is Count Up the device will count up else count down.

Uploaded by

Bangon Kali
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

UpDown Counter

Count to 15 then back to 0 and vice versa.


`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 11:19:04 12/19/2012
// Design Name:
// Module Name: UpDownCounter
// Project Name:
// Target Devices:
// Tool versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module UpDownCounter(
input reset,
input enable,
input clk,
output count
);
wire clk;
wire reset;
wire enable;
reg [4:0]count;
reg count_state; // 1 => Up; 0 => Down
always @(posedge clk) begin
if (enable && !reset) begin
if (count_state) begin
count = count + 1;
if (count == 15) begin
count_state = 0;
end

end else begin


count = count - 1;
if (count == 0) begin
count_state = 1;
end
end
end else begin
count = 0;
count_state = 1;
end
end
endmodule
`timescale 1ns / 1ps
////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 11:31:31 12/19/2012
// Design Name: UpDownCounter
// Module Name: D:/ACADS/ECE 195/UpDownCounter/UpDownCounter_tb.v
// Project Name: UpDownCounter
// Target Device:
// Tool versions:
// Description:
//
// Verilog Test Fixture created by ISE for module: UpDownCounter
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
////////////////////////////////////////////////////////////////////////////////
module UpDownCounter_tb;
// Inputs
reg reset;
reg enable;
reg clk;
// Outputs
wire [4:0]count;

// Instantiate the Unit Under Test (UUT)


UpDownCounter uut (
.reset(reset),
.enable(enable),
.clk(clk),
.count(count)
);
initial begin
// Initialize Inputs
reset = 0;
enable = 0;
clk = 0;
// Initialize Inputs
clk = 0;
reset = 0;
enable = 0;
// Wait 100 ns for global reset to finish
#10;
reset = 1;
enable = 0;
#10;
reset = 0;
enable = 1;

#50
reset = 1;
#10
enable = 0;
#30
enable = 1;
#50
reset = 0;
#1000; $finish;
end
// Provide clock
always begin
#10 clk = !clk;
end
endmodule

You might also like