Scribd
Upload
70 views1 page

Protection and Switch Gear - 2 Marks With Answers

Protective relays detect faults and initiate circuit breaker operation to isolate defective elements, thereby protecting the system. Short circuits cause current to increase enormously, potentially damaging connected systems if not isolated. Protected zones are areas directly covered by protection schemes like relays or fuses. Unit systems only isolate faults in their zone, while non-unit systems can isolate external faults. Primary protection clears line faults using its own relay and breaker, acting as the first line of defense. Backup protection operates if primary protection fails, as the second line of defense. Overcurrent relays include induction non-directional, induction directional, and current differential types.

Uploaded by

swathi_gren
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
70 views1 page

Protection and Switch Gear - 2 Marks With Answers

Protective relays detect faults and initiate circuit breaker operation to isolate defective elements, thereby protecting the system. Short circuits cause current to increase enormously, potentially damaging connected systems if not isolated. Protected zones are areas directly covered by protection schemes like relays or fuses. Unit systems only isolate faults in their zone, while non-unit systems can isolate external faults. Primary protection clears line faults using its own relay and breaker, acting as the first line of defense. Backup protection operates if primary protection fails, as the second line of defense. Overcurrent relays include induction non-directional, induction directional, and current differential types.

Uploaded by

swathi_gren
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Protection and Switch gear - 2 marks with answers

1. What are the functions of protective relays To detect the fault and initiate the operation of the circuit breaker to isolate the defective element from the rest of the system, thereby protecting the system from damages consequent to the fault. 2. Give the consequences of short circuit. Whenever a short-circuit occurs, the current flowing through the coil increases to an enormous value. If protective relays are present , a heavy current also flows through the relay coil, causing it to operate by closing its contacts.The trip circuit is then closed , the circuit breaker opens and the fault is isolated from the rest of the system. Also, a low voltage may be created which may damage systems connected to the supply. 3. Define protected zone. Are those which are directly protected by a protective system such as relays, fuses or switchgears.If a fault occurring in a zone can be immediately detected and or isolated by a protection scheme dedicated to that particular zone. 4. What are unit system and non unit system? A unit protective system is one in which only faults occurring within its protected zone are isolated.Faults occurring elsewhere in the system have no influence on the operation of a unit system.A non unit system is a protective system which is activated even when the faults are external to its protected zone. 5. What is primary protection? Is the protection in which the fault occurring in a line will be cleared by its own relay and circuit breaker.It serves as the first line of defence. 6. What is back up protection? Is the second line of defence , which operates if the primary protection fails to activate within a definite time delay. 7. Name the different kinds of over current relays. Induction type non-directional over current relay,Induction type directional over current relay & current differential relay. 8. Define energizing quantity. It refers to the current or voltage which is used to activate the relay into operation. 9. Define operating time of a relay. It is defined as the time period extendind from the occurrence of the fault through the relay detecting the fault to the operation of the relay. 10. Define resetting time of a relay. It is defined as the time taken by the relay from the instant of isolating the fault to the moment when the fault is removed and the relay can be reset.

You might also like