Scribd
Upload
96 views6 pages

DVBNM, V BN

This document provides inputs and calculations for analyzing the structural integrity of a horizontal cylindrical vessel under various loading conditions. It includes the design pressure, material properties, vessel dimensions, loads, and calculations of stresses at different points on the vessel to check if stresses exceed allowable values. Primary membrane stresses are calculated at the mid-span and supports of the vessel under different loading conditions. Flow properties and calculations for microfluidic systems such as pressure drop, flow rate, and mean velocity are also provided.

Uploaded by

brintopv
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
96 views6 pages

DVBNM, V BN

This document provides inputs and calculations for analyzing the structural integrity of a horizontal cylindrical vessel under various loading conditions. It includes the design pressure, material properties, vessel dimensions, loads, and calculations of stresses at different points on the vessel to check if stresses exceed allowable values. Primary membrane stresses are calculated at the mid-span and supports of the vessel under different loading conditions. Flow properties and calculations for microfluidic systems such as pressure drop, flow rate, and mean velocity are also provided.

Uploaded by

brintopv
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 6

Support for horizontal vessels :

Inputs
Design Pressure Allowable Stress of Materials Density of the material Outside Diameter of the drum Thickness of the Shell(t) Distance from Saddle to end of cyllinder (A) Depth of the head (b) Total weight of drum & its content Total length of Cylindrical vessel(L) Angle of the saddle 0.2 120 1400 2596 1 732 499 286855 7055 150

Inside Radius r Mean Radius ri Longitudinal bending moment : M3 (At Mid Span) = M4 (At Supports) = Longitudinal Stresses at midspan : Stress at the highest point of crosssection f1= Check the condition vessel full of product with zero pressure f1= Stress at the lowest point of crosssection f2= Longitudinal Stresses at Supports : Stress near the equator f3= Stress at the lowest point of crosssection f4= Primary membrane circumferential Stress Highest point of the crosssection Lowest point of the crosssection

1297 1297.5

279011100.75 64654794.45 88.55 -41.20 194.06 65.38 #REF! 259.50 305.72

Primary membrane stress intensities : (At mid span) Highest point of the cross-section sq-sZ sZ+0.5p Lowest point of the crosssection sq-sZ sZ+0.5p Primary membrane stress intensities : (At Support) Equator sq-sZ sZ+0.5p Lowest point of the crosssection sq-sZ sZ+0.5p #REF!

170.95 88.65 111.66 194.16

194.12 65.48 #REF! #REF!

N/mm2 N/mm2 Kg/m3 mm mm mm mm n mm


O

a 0 1

120 1 0.107

4 K1= 0.161

mm mm

N.mm N.mm N/mm2 N/mm2 N/mm2 N/mm2 N/mm2 N/mm2 N/mm2

N/mm N/mm2 N/mm N/mm2


2

1 0 0 1

N/mm N/mm2 N/mm N/mm2


2

1 0 #REF! #REF!

135 1 0.132

150 1 0.161

a 0 1

120 1 0.192

135 1 0.234

#N/A K1= #REF!

150 1 0.279

Tube Diameter Length Dynamic Viscosity Hydraulic resistance Section Volume Pressure drop for a flow rate Flow rate Mean velocity Pressure drop Pressure drop for a mean velocity Mean velocity Flow rate Pressure drop Flow rate for a pressure drop Pressure drop Flow rate Mean velocity

Metric System 3.00E-04 1.00E-01 1.00E-03 5.03E+11 7.07E-08 7.07E-09 m m Pa.s Pa.s/m^3 m^2 m^3

Microfluidic unity 300 m 10 cm 1 centiPoise

7.069 L

1.17E-10 m^3/s 1.65E-03 m/s 59 Pa

7 L/min 1650.49 m/s 0.59 mBar

2.12E-03 m/s 1.50E-10 m^3/s 7.54E+01 Pa

2122.00 m/s 9.00 L/min 0.75 mBar

68 Pa 1.35E-10 m^3/s 1.91E-03 m/s

0.68 mBar 8.11 L/min 1912.50 m/s

You might also like