Scribd
Upload
35 views1 page

Hand Wheel

The document describes a lathe setup for cutting a ball, showing the orientation of the lathe headstock and carriage, with a ball turner tool mounted in the toolpost making an arc cut on a workpiece to form a spherical shape with a 7/16" radius.

Uploaded by

António Oliveira
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views1 page

Hand Wheel

The document describes a lathe setup for cutting a ball, showing the orientation of the lathe headstock and carriage, with a ball turner tool mounted in the toolpost making an arc cut on a workpiece to form a spherical shape with a 7/16" radius.

Uploaded by

António Oliveira
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

View is looking down. Headstock to the left.

Rim faced square

Disc Blank

Handwheel with torroidal rim

Reverse in chuck For final cut Lathe Axis

Ball turner radius Tool point arc.

7/16"

Direction of carriage feed.

Ball turner pivot point

You might also like