PIPING MATERIAL SPECIFICATION Client : Engineers India Ltd. Std. Specification New Delhi Pipe Class : Dept./Sect.

STANDARD SPECIFICATION No.

6-44-0005 Rev. 4
Page 110 of 431

16/43

Project : Location :

A3A

Sheet 1

of

PIPE CLASS : RATING : BASE MATERIAL : CORROSION ALLOWANCE : SPECIAL REQUIREMENT :

0 10.55 38 10.55 50 10.55 65

A3A
150 CARBON STEEL 1.5 MM NON IBR

TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS

TEMP PRESS 100 10.55 150 10.55 186 10.55 10.55

SERVICE
NON CORROSIVE UTILITIES (ABOVE GROUND) CATEGORY "D" FLUID - COOLING WATER, INSTRUMENT AIR(2" & ABOVE), PLANT AIR, INERT GAS, CARBON DI OXIDE (DRY), NITROGEN, CONDENSATE & BOILER FEED SUCTION (NON IBR). THIS CLASS DOES NOT COVER UNDERGROUND PIPING AND THE FIRE WATER SERVICE.

NOTES
1 6 10 31 64 65 76 77 78 86 NDT REQUIREMENTS AS PER EIL STANDARD 6-44-0016. FOR FABRICATED REDUCERS,REFER EIL'STD 7-44-0485 & 7-44-0487. FOR MITRES, REFER EIL'STD 7-44-0033. USE 4-PIECE 90 DEG. MITRE FOR 8" & 10", 5-PIECE 90 DEG. MITRE FOR SIZES FROM 12" TO 54" AND 6-PIECE 90 DEG. MITRE FOR SIZES 56" TO 80".(45 DEG. MITRE SHALL REQUIRE ONE PIECE LESS.) USE BUTTERFLY VALVES INSTEAD OF GATE VALVES FROM 10" ONWARDS IN WATER SERVICE AND UPTO 70 DEG C. DESIGN PRESSURE FOR BUTTERFLY VALVES IS LIMITED UPTO 10 BAR. AWWA C207 CL.D FLANGES SHALL BE OF HUB TYPE. FORGINGS ARE ACCEPTABLE IN LIEU OF PLATE MATERIAL FOR BLIND FLANGES AND SPACER & BLINDS. FOR PERMANENT BW STRAINERS,REFER EIL'STD 7-44-0303 & 7-44-0304; AND FOR TEMPORARY STRAINERS,REFER EIL'STD 7-44-0300. FOR SIZES > 24", SPACER & BLIND SHALL BE DESIGNED BY THE MANUFACTURER AS PER ASME B31.3. FOR SIZES ABOVE 30", TEMPERATURE AND PRESSURE RATINGS SHALL BE 70 DEG.C & 6.6 KG/CM2G RESPECTIVELY. BUTTERFLY VALVES FOR THE SPEC ARE PN10 RATED WITH A MAXIMUM PRESSURE OF 10.2 KG/CM2G.

SPECIAL NOTES ITEM

MAINTAINENCE JOINTS PIPE JOINTS ALL 1.5" & BELOW 2.0" & ABOVE DRAINS ON LINES <= 1.5" ON LINES >= 2.0" VENTS ON LINES <= 1.5" ON LINES >= 2.0" TEMP.CONN PRESS.CONN 1.5" 0.75"

SIZE

DESCRIPTION
FLANGED, TO BE KEPT MINIMUM SW COUPLING 3000 LBS. BUTTWELDED REFER EILSTD 7-44-350, DF3 0.75" OR AS PER P&ID. REFER EIL STD. 7-44-351, D4 REFER EIL STD. 7-44-350, VC1 0.75" OR AS PER P&ID. REFER EIL STD 7-44-351, V1 FLANGED. REFER EIL STD 7-44-353 SW, SH HVY NIPPLE WITH GATE VALVE TO SPEC AS PER EIL STD 7-44-354

A.CODE

Package

: IPMCS

Report No. : 50 Format No. 8-00-0001-F1 Rev. 0

A3A
Copyright EIL- All rights reserved

PIPING MATERIAL SPECIFICATION Client : Engineers India Ltd. Std. Specification New Delhi Pipe Class : Dept./Sect. :

STANDARD SPECIFICATION No.

6-44-0005 Rev. 4
Page 111 of 431

16/43

Project : Location :

A3A

Sheet 2

of

72. 70. 68. 66. 64. 62. 60. 58. 56. 54. 52. 50. 48. 46. 44. 42. 40. 38. 36. 34. 32. 30. 28. 26. 24. 22. 20. 18. 16. 14. 12. 10. 8.0 6.0 5.0 4.0 3.5 3.0 2.5 2.0 1.5 1.25 1.0 T 0.75 T T 0.5 T T T
.500 .750 1.000 1.250

BRANCH PIPE ( SIZE IN INCHES)

T T R T R R T R R R T T R T P R T P P R T R P P R T P R P P R T P P R P P R T T T T T T H T H T H
1.500 2.000 2.500

T R R R R R R R R R R R R

T R R R R R R R R R R R R R

T R R R R R R R R R R R R R R

T R R R R R R R R R R R R R R R

T R R R R R R R R R R R R R R R R

T R R R R R R R R R R R R R R R R R

T R R R R R R R R R R R R R R R R R R

T R R R R R R R R R R R R R R R R R R R

T R R R R R R R R R R R R R R R R R R R R

R R R R R R R R R R R R R R R R R R R R R R

R R R R R R R R R R R R R R R R R R R R R R R

R R R R R R R R R R R R R R R R R R R R R R R R

R R R R R R R R R R R R R R R R R R R R R R R R R

R R R R R R R R R R R R R R R R R R R R R R R R R R

R R R R R R R R R R R R R R R R R R R R R R R R R R R

R R R R R R R R R R R R R R R R R R R R R R R R R R R R

R R R R R R R R R R R R R R R R R R R R R R R R R R R R R

R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R

T P P P P P P P

R R R R R R R R

R R R R R R R R

R R R R R R R R

R R R R R R R R

P P P P P P P P P P P P P P P P P P P P P P P P H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H
5.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000 22.000

R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R P R R R R R R R R R R R R R R R R R R R R R H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H
24.000 26.000 28.000 30.000 32.000 34.000 36.000 38.000 40.000 42.000 44.000 46.000 48.000 50.000 52.000 54.000 56.000 58.000 60.000 62.000 64.000 66.000

P P H H H H
3.500 4.000

P H H H H
3.000

RUN PIPE (SIZE IN INCHES) CODE DESCRIPTION

F H P R S SADDLE FUSED JT H. COUPLING PIPE TO PIPE REINFORCED SOCKOLETS T W I X L TEES WELDOLETS INSTRUMENT TEE Refer Notes SWEEPOLET

Package

: IPMCS

Report No. : 50 Format No. 8-00-0001-F1 Rev. 0

A3A
Copyright EIL- All rights reserved

PIPING MATERIAL SPECIFICATION Client : Engineers India Ltd. Std. Specification New Delhi Pipe Class : Dept./Sect. :

STANDARD SPECIFICATION No.

6-44-0005 Rev. 4
Page 112 of 431

16/43

Project : Location :

A3A

Sheet 3

of

R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R

R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R

R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R

R R R R R R R R R H H H H H H H H H H H H
68.000 70.000 72.000

72. 70. 68. 66. 64. 62. 60. 58. 56. 54. 52. 50. 48. 46. 44. 42. 40. 38. 36. 34. 32. 30. 28. 26. 24. 22. 20. 18. 16. 14. 12. 10. 8.0 6.0 5.0 4.0 3.5 3.0 2.5 2.0 1.5 1.25 1.0 0.75 0.5

BRANCH PIPE (SIZE IN INCHES)

Package

: IPMCS

Report No. : 50 Format No. 8-00-0001-F1 Rev. 0

A3A
Copyright EIL- All rights reserved

PIPING MATERIAL SPECIFICATION Client : Engineers India Ltd. Std. Specification New Delhi Pipe Class : Dept./Sect. :

STANDARD SPECIFICATION No.

6-44-0005 Rev. 4
Page 113 of 431

16/43

Project : Location :

A3A

Sheet 4

of

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Id.

Item Type

Lower Upper Size Size

(Inch) (Inch)

Sch/ Thk

Dmn. STD Material

Description

Commodity Code

Note No

Pipe Group
PIP PIP PIP PIP PIP PIP PIP PIP PIP NIP PIPE PIPE PIPE PIPE PIPE PIPE PIPE PIPE PIPE NIPPLE 00.500 02.000 08.000 14.000 20.000 26.000 50.000 64.000 76.000 00.500 01.500 06.000 12.000 18.000 24.000 48.000 60.000 72.000 80.000 01.500 HVY HVY 6.0 8.0 10.0 12.0 14.0 16.0 18.0 HVY IS-1239-I IS-1239-I IS-3589 IS-3589 IS-3589 IS-3589 IS-3589 IS-3589 IS-3589 IS-1239-I IS-1239 (BLACK) IS-1239 (BLACK) IS-3589 GR.330 IS-3589 GR.330 IS-3589 GR.330 IS-3589 GR.330 IS-3589 GR.330 IS-3589 GR.330 IS-3589 GR.330 IS-1239 (BLACK) PE, C.WELDED BE, C.WELDED BE, WELDED BE, WELDED BE, WELDED BE, WELDED BE, WELDED BE, WELDED BE, WELDED PBE, C.WELDED PI6D471Z0 PI6D411Z0 PI7D919Z0 PI7D919Z0 PI7D919Z0 PI7D919Z0 PI7D919Z0 PI7D919Z0 PI7D919Z0 PN6D461Z0

Flange Group
FLG FLG FLG FLB FLB FEF FEF FEF FLNG.SW FLNG.SO FLNG.SO FLNG.BLIND FLNG.BLIND FLNG.FIG.8 SPCR&BLND SPCR&BLND 00.500 02.000 26.000 00.500 26.000 00.500 10.000 26.000 01.500 24.000 80.000 24.000 48.000 08.000 24.000 80.000 M B-16.5 B-16.5 ASTM A 105 ASTM A 105 150, RF/125AARH 150, RF/125AARH 150, FF/125AARH 150, RF/125AARH 150, FF/125AARH 150, FF/125AARH 150, FF/125AARH 150, FF/125AARH FSC0127Z0 FNC0127Z0 FN40121Z0 FBC0127Z0 FB45321Z0 FGK0121Z0 FCK0121Z0 FCG5321Z0

AWWA-C207 ASTM A 105 CL.D B-16.5 ASTM A 105

AWWA-C207 ASTM A 285 GR.C CL.D ASMEB16.48 ASMEB16.48 MNF'STD ASTM A 105 ASTM A 105 ASTM A 285 GR.C

Fitting Group
ELB90 ELB90 ELB45 ELB45 ELBOW.90 ELBOW.90 ELBOW.45 ELBOW.45 00.500 02.000 00.500 02.000 01.500 06.000 01.500 06.000 STD STD B-16.11 B-16.9 B-16.11 B-16.9 ASTM A 105 ASTM A 234 GR.WPB ASTM A 105 ASTM A 234 GR.WPB SW, 3000 BW, 1.5D SW, 3000 BW, 1.5D WA602D2Z0 WAG684Z10 WB602D2Z0 WBG684Z10

Package

: IPMCS

Report No. : 50 Format No. 8-00-0001-F1 Rev. 0

A3A
Copyright EIL- All rights reserved

PIPING MATERIAL SPECIFICATION Client : Engineers India Ltd. Std. Specification New Delhi Pipe Class : Dept./Sect. :

STANDARD SPECIFICATION No.

6-44-0005 Rev. 4
Page 114 of 431

16/43

Project : Location :

A3A

Sheet 5

of

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Id.

Item Type

Lower Upper Size Size

(Inch) (Inch)

Sch/ Thk

Dmn. STD Material

Description

Commodity Code

Note No

Fitting Group
MIT90 MIT45 TEQ TEQ TEQ TRED TRED TRED REDC REDC REDE REDE SWGC SWGE CAP CAP CAP CAP CPLF CPLH CPLL CPLR UNN MITRE.90 MITRE.45 T.EQUAL T.EQUAL T.EQUAL T.RED T.RED T.RED REDUC.CONC REDUC.CONC REDUC.ECC REDUC.ECC SWAGE.CONC SWAGE.ECC CAP CAP CAP CAP CPLNG.FULL CPLNG.HALF CPLNG.LH CPLNG.RED UNION 08.000 08.000 00.500 02.000 08.000 00.500 02.000 08.000 02.000 08.000 02.000 08.000 00.500 00.500 00.500 02.000 08.000 50.000 00.500 00.500 00.500 00.500 00.500 80.000 80.000 01.500 06.000 48.000 01.500 06.000 48.000 06.000 80.000 06.000 80.000 03.000 03.000 01.500 06.000 48.000 80.000 01.500 01.500 01.500 01.500 01.500 STD M STD, STD M, M STD, STD M, M STD, STD M, M STD, STD STD, STD STD M M M EIL'STD EIL'STD B-16.11 B-16.9 B-16.9 B-16.11 B-16.9 B-16.9 B-16.9 EIL'STD B-16.9 EIL'STD BS-3799 BS-3799 B-16.11 B-16.9 B-16.9 IS-3589 GR.330 IS-3589 GR.330 ASTM A 105 ASTM A 234 GR.WPB ASTM A 234 GR.WPB-W ASTM A 105 ASTM A 234 GR.WPB ASTM A 234 GR.WPB-W ASTM A 234 GR.WPB IS-3589 GR.330 ASTM A 234 GR.WPB IS-3589 GR.330 ASTM A 105 ASTM A 105 ASTM A 105 ASTM A 234 GR.WPB ASTM A 234 GR.WPB ASTM A 285 GR.C ASTM A 105 ASTM A 105 ASTM A 105 ASTM A 105 ASTM A 105 BW, 1.5D BW, 1.5D SW, 3000 BW BW SW, 3000 BW BW BW BW BW BW PBE PBE SCRF, 3000 BW BW BW SW, 3000 SW, 3000 SW, 3000 SW, 3000 SW, 3000 WDKF141Z0 WGKF141Z0 WE602D2Z0 WEG684ZZ0 WEG754ZZ0 WR602D2Z0 WRG684ZZ0 WRG754ZZ0 WUG684ZZ0 WUKF14ZZ0 WVG684ZZ0 WVKF14ZZ0 WNH026ZZ0 WPH026ZZ0 WF60282Z0 WFG684ZZ0 WFG684ZZ0 WF3J54ZZ0 WJ602D2Z0 WK602D2Z0 WL602D2Z0 WM602D2Z0 WQH02D2Z0

CALC ASME-VIII B-16.11 B-16.11 B-16.11 B-16.11 BS-3799

Package

: IPMCS

Report No. : 50 Format No. 8-00-0001-F1 Rev. 0

A3A
Copyright EIL- All rights reserved

PIPING MATERIAL SPECIFICATION Client : Engineers India Ltd. Std. Specification New Delhi Pipe Class : Dept./Sect. :

STANDARD SPECIFICATION No.

6-44-0005 Rev. 4
Page 115 of 431

16/43

Project : Location :

A3A

Sheet 6

of

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Id.

Item Type

Lower Upper Size Size

(Inch) (Inch)

Sch/ Thk

Dmn. STD Material

Description

Commodity Code

Note No

Valves Group
GAV VLV.GATE 00.500 01.500 API-602 BODY-ASTM A 105,TRIMSTELLITED,STEM13%CR.STEEL SW, 800, 3000, B16.11, SHT NO.- 51001 51001ZZZ0

GAV

VLV.GATE

02.000

24.000

API-600

BODY-ASTM A 216 FLGD, 150, B-16.5, RF/125AARH, SHT GR.WCB,TRIMNO.- 51321 13% CR.STEEL BODY-ASTM A 105,TRIMSTELLITED,STEM13%CR STEEL SW, 800, 3000, B16.11, SHT NO.- 52001

51321ZZZ0

GLV

VLV.GLOBE

00.500

01.500

BS-5352

52001ZZZ0

GLV

VLV.GLOBE

02.000

16.000

BS-1873

BODY-ASTM A 216 FLGD, 150, B-16.5, GR.WCB,TRIMRF/125AARH, SHT 13% CR.STEEL NO.- 52321 BODY-ASTM A 105,TRIMSTELLITED SW, 800, 3000, B16.11, SHT NO.- 53001

52321ZZZ0

CHV

VLV.CHECK

00.500

01.500

BS-5352

53001ZZZ0

CHV

VLV.CHECK

02.000

24.000

BS 1868

BODY-ASTM A 216 FLGD, 150, B-16.5, GR.WCB,TRIMRF/125AARH, SHT 13% CR.STEEL NO.- 53321 BODY-ASTM A 216 FLGD, 150, GR.WCB,TRIMAWWAC207, 13% CR.STEEL FF/125AARH, SHT NO.- 53316 BODY-ASTM A 105 FLGD, 150, B-16.5, /A RF/125AARH, SHT 216GR.WCB,TRIM- NO.- 54321 BODY SEATRPTFE BODY-ASTM A 216 WAFL, 150, B-16.5, GR.WCB,TRIMWAF/125AARH, SHT 13% CR.STEEL NO.- 56321 BODY-ASTM A 216 FLGD, 150, GR.WCB,TRIMAWWAC207, 13% CR.STEEL FF/125AARH, SHT NO.- 56316

53321ZZZ0

CHV

VLV.CHECK

26.000

48.000

API-594

53316ZZZ0

BLV

VLV.BALL

00.500

16.000

BS-5351

54321ZZZ0

BFV

VLV.BTRFLY

03.000

24.000

BS-5155

56321ZZZ0

BFV

VLV.BTRFLY

26.000

48.000

BS-5155

56316ZZZ0

Bolt Group
BOS BOM BOLT.STUD BOLT.M/C 18.000 00.500 80.000 16.000 B-18.2 B-18.2 BOLT:A193 GR.B7, NUT:A194 GR.2H BOLT:A307 GR.B, NUT:A563 GR.B BS40404Z0 BM41418Z0

Gasket Group
GAS GAS GASKET GASKET 00.500 26.000 24.000 80.000 B-16.21ANSI B16.5 IS-2712-GR.W/3 RING, 150, 2 MM GKB1052Z0

AWWA-C207 IS-2712-GR.W/3 CL.D

FULLFACE, 150, 2 MM GK21022Z0

Trap/Strainer Group
TRP TRAP.STEAM 00.500 01.500 MNF'STD B:A105;T:13%CR;S: FLGD, THRMDNMC, SS304 150,RF/125AARH TR3065530

Package

: IPMCS

Report No. : 50 Format No. 8-00-0001-F1 Rev. 0

A3A
Copyright EIL- All rights reserved

PIPING MATERIAL SPECIFICATION Client : Engineers India Ltd. Std. Specification New Delhi Pipe Class : Dept./Sect. :

STANDARD SPECIFICATION No.

6-44-0005 Rev. 4
Page 116 of 431

16/43

Project : Location :

A3A

Sheet 7

of

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Id.

Item Type

Lower Upper Size Size

(Inch) (Inch)

Sch/ Thk

Dmn. STD Material

Description

Commodity Code

Note No

Trap/Strainer Group
TSR PSR PSR PSR STRNR.TEMP STRNR.PERM STRNR.PERM STRNR.PERM 01.500 00.500 02.000 08.000 24.000 01.500 06.000 24.000 M M EIL'STD MNF'STD EIL'STD EIL'STD B:A285GR.C;INT:S S304 B:A105;INT:SS304 B:A234GR.WPB;IN T:SS304 B:A234GR.WPBW;I NT:SS304 CONETYPE, 150,FF/125AARH SW, Y-TYPE, 800 BW, T-TYPE BW, T-TYPE ST14431Z0 SP303D510 SP13344Z0 SP13644Z0

Package

: IPMCS

Report No. : 50 Format No. 8-00-0001-F1 Rev. 0

A3A
Copyright EIL- All rights reserved