Scribd
Upload
18 views

Deflection Extra

A beam is loaded and supported as shown. Use the fourth-order integration method to determine the reaction at roller support A. A beam is loaded and supported as shown. Determine the reactions at supports A and B using double integration, and draw the shear and bending moment diagrams. Determine the deflection at the middle of the span. The deflection at pulley B is to be determined for a loaded steel shaft supported by a pin at A and roller at E. Determine the deflection at point B for a simply supported steel beam loaded by a uniform load w.

Uploaded by

SD0-30
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
18 views

Deflection Extra

A beam is loaded and supported as shown. Use the fourth-order integration method to determine the reaction at roller support A. A beam is loaded and supported as shown. Determine the reactions at supports A and B using double integration, and draw the shear and bending moment diagrams. Determine the deflection at the middle of the span. The deflection at pulley B is to be determined for a loaded steel shaft supported by a pin at A and roller at E. Determine the deflection at point B for a simply supported steel beam loaded by a uniform load w.

Uploaded by

SD0-30
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 16

Abeamisloadedand supportedasshown.Use thefourthorder integrationmethodto determinethereactionat rollersupportA.

Abeamisloadedandsupported asshown. (a)Usethedoubleintegration methodtodeterminethe reactionsatsupportsAandB. (b)Drawtheshearforceand bendingmomentdiagramsfor thebeam. (c)Determinethedeflectionin themiddleofthespan.

Thesolid30mmdiametersteel[E=200GPa]shaftshownsupportstwobelt pulleys.AssumethatthebearingatAcanbeidealizedasapinsupportandthatthe bearingatEcanbeidealizedasarollersupport.Fortheloadingshown,determine theshaftdeflectionatpulleyB.

ThesimplysupportedbeamshownconsistsofaW530 66structuralsteel wideflangeshape[E=200GPa;I=351 106mm4].Ifw=85kN/m, determinethebeamdeflectionatpointB.

You might also like