Scribd
Upload
89 views1 page

Comparison Between Analog and Digital Transmission

Digital transmission has several advantages over analog transmission. Digital uses discrete signals of either voltage changes or light levels, allowing it to support high-speed data transmission. It also enables multiple conversations to share a channel via multiplexing, improving transmission efficiency. Digital requires less bandwidth and power than analog, and provides greater security and lower error rates through encryption.

Uploaded by

Shazib Shabir
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
89 views1 page

Comparison Between Analog and Digital Transmission

Digital transmission has several advantages over analog transmission. Digital uses discrete signals of either voltage changes or light levels, allowing it to support high-speed data transmission. It also enables multiple conversations to share a channel via multiplexing, improving transmission efficiency. Digital requires less bandwidth and power than analog, and provides greater security and lower error rates through encryption.

Uploaded by

Shazib Shabir
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Comparison between Analog and Digital transmission: Feature Signal Analog Characteristics Continuously variable, in both amplitude and

frequency Digital Characteristics Discrete signal, represented as either changes in voltage or changes in light levels Bits per second (for example, a T-1 line carries 1.544Mbps, and an E-1 line transports 2.048Mbps) High bandwidth that can support high-speed data and emerging applications that involve video and multimedia High; multiplexers enable multiple conversations to share a communications channel and hence to achieve greater transmission efficiencies Low because only two discrete signalsthe one and the zeroneed to be transmitted

Traffic Hz (for example, a measurement telephone channel is 4KHz) Bandwidth Low bandwidth (4KHz), which means low data transmission rates (up to 33.6Kbps) because of limited channel bandwidth Low; one conversation per telephone channel

Network capacity

Power requirement

High because the signal contains a wide range of frequencies and amplitudes

Security

Poor; when you tap into Good; encryption can be an analog circuit, you used hear the voice stream in its native form, and it is difficult to detect an intrusion High; 105 bits (that is, 1 in 100,000 bits) is guaranteed to have an error Low; with twisted-pair, 107 (that, is 1 in 10 million bits per second) will have an error, with satellite, 109 (that is, 1 in 1 billion per second) will have an error, and with fiber, 1011 (that is only 1 in 10 trillion bits per second) will have an error

Error rates

You might also like