Scribd
Upload
149 views

Engineering Design

The document is an activity sheet from a Mechanical Engineering course at De La Salle University in the Philippines from 2012-2013. It provides instructions for an assignment on bearing layout, where students are asked to make detail drawings of mounting different bearing types between 35-140mm in diameter, including deep groove ball bearings, self-aligning ball bearings, taper roller bearings, and spherical roller bearings. The intended learning outcome is for students to learn how to make bearing mounting layouts.

Uploaded by

Rodge Bal
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
149 views

Engineering Design

The document is an activity sheet from a Mechanical Engineering course at De La Salle University in the Philippines from 2012-2013. It provides instructions for an assignment on bearing layout, where students are asked to make detail drawings of mounting different bearing types between 35-140mm in diameter, including deep groove ball bearings, self-aligning ball bearings, taper roller bearings, and spherical roller bearings. The intended learning outcome is for students to learn how to make bearing mounting layouts.

Uploaded by

Rodge Bal
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

DE LA SALLE UNIVERSITY DASMARINAS

Mechanical Engineering Department Machi Machine Design 2 - Lab 2nd Semester : SY2012 - 2013

Fundamentals of Pure Rolling Bearing Layout 2.11.1 Activity Sheet

INTENDED LEARNING OUTCOME : 1. To learn how to make bearing mounting layout. REQD : Bearing Mounting a. Make detail drawing of mounting of the following bearing. b. Submit soft (Autocad) and hard copy. c. Select your bearing size from bore size 35 mm dia. To 140 mm dia. d. Use A2 sheet

1.0.

Deep Groove Ball Bearing.

1.1.

Self-aligning Ball Bearings

Giesecke, FE. Mitchell, A. Spencer, HC. et al. (2000). ENGINEERING GRAPHICS 7th ed. Prenctice Hall. USA

Page 1 of 6

DE LA SALLE UNIVERSITY DASMARINAS

Mechanical Engineering Department Machi Machine Design 2 - Lab 2nd Semester : SY2012 - 2013

Fundamentals of Pure Rolling Bearing Layout 2.11.1 Activity Sheet

1.2.

Taper Roller Bearing

1.3.

Spherical Roller Bearings

Giesecke, FE. Mitchell, A. Spencer, HC. et al. (2000). ENGINEERING GRAPHICS 7th ed. Prenctice Hall. USA

Page 2 of 6

DE LA SALLE UNIVERSITY DASMARINAS

Mechanical Engineering Department Machi Machine Design 2 - Lab 2nd Semester : SY2012 - 2013

Fundamentals of Pure Rolling Bearing Layout 2.11.1 Activity Sheet

Giesecke, FE. Mitchell, A. Spencer, HC. et al. (2000). ENGINEERING GRAPHICS 7th ed. Prenctice Hall. USA

Page 3 of 6

DE LA SALLE UNIVERSITY DASMARINAS

Mechanical Engineering Department Machi Machine Design 2 - Lab 2nd Semester : SY2012 - 2013

Fundamentals of Pure Rolling Bearing Layout 2.11.1 Activity Sheet

Giesecke, FE. Mitchell, A. Spencer, HC. et al. (2000). ENGINEERING GRAPHICS 7th ed. Prenctice Hall. USA

Page 4 of 6

DE LA SALLE UNIVERSITY DASMARINAS

Mechanical Engineering Department Machi Machine Design 2 - Lab 2nd Semester : SY2012 - 2013

Fundamentals of Pure Rolling Bearing Layout 2.11.1 Activity Sheet

Giesecke, FE. Mitchell, A. Spencer, HC. et al. (2000). ENGINEERING GRAPHICS 7th ed. Prenctice Hall. USA

Page 5 of 6

DE LA SALLE UNIVERSITY DASMARINAS

Mechanical Engineering Department Machi Machine Design 2 - Lab 2nd Semester : SY2012 - 2013

Fundamentals of Pure Rolling Bearing Layout 2.11.1 Activity Sheet

Giesecke, FE. Mitchell, A. Spencer, HC. et al. (2000). ENGINEERING GRAPHICS 7th ed. Prenctice Hall. USA

Page 6 of 6

You might also like