Scribd
Upload
52 views

A Design For Fin Plate & Connection 1

This document discusses the design of several fin plate and base plate connections using various anchor bolts and welds. It provides the key parameters considered for each connection such as bolt spacing and size, required bolt and weld capacities, plate dimensions, and moments and tensions calculated. Each connection design is checked and confirmed to be satisfactory.

Uploaded by

Sipil Inten
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
52 views

A Design For Fin Plate & Connection 1

This document discusses the design of several fin plate and base plate connections using various anchor bolts and welds. It provides the key parameters considered for each connection such as bolt spacing and size, required bolt and weld capacities, plate dimensions, and moments and tensions calculated. Each connection design is checked and confirmed to be satisfactory.

Uploaded by

Sipil Inten
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

a

DesignforFinPlate&connection1 Spacingofbolt Momentatconnection Tensionatanchorbolt Using3M16Bolt DesignresistanceforTensileforceofoneanchorbolt Design resistance for Tensile force of one anchor bolt DesignTensilestrength Spacingofbolt Tensilestrengthofbolt Tensionatanchorbolt

= = =

25 5.09 203.8

mm kNm kN

= = = =

70.7 25 212.1 203.8

kN mm kN kN

OK

CheckforFinPlate Momentatfinplate YeildstrengthofMildsteel Platewidth RequiredPlasticModulus bd2/6 Requiredthicknessofplate Usethicknessofstainlesssteel Welds Shearatconnection Lengthofweld,l Filletwelds,s Effectivelengthofweld,lwe=2(l2s) For6mmfilletweldsgrade43,Pw Throatsize,a=0.7s Capacityoffilletweld,Pweld=Pw.lwe.a

= = =

0.509 460 125.000

kNm N/mm2 mm

= = =

1.107 7.291 9

cm3 mm mm

OK

= = = = = = =

5.09 75 4.5 132 215 3.15 89.4

kN mm mm mm N/mm2 mm kN OK

D i f Designforconnection2 i 2 CapacityofM10Grade8.8 TensileCapacity FactoredMoment Welds Shearatconnection Lengthofweld,l Filletwelds,s Effectivelengthofweld,l = 2(l2s) Effective length of weld lwe=2(l2s) For6mmfilletweldsgrade43,Pw Throatsize,a=0.7s Capacityoffilletweld,Pweld=Pw.lwe.a

= =

10.7 1.40

kN kNm

OK

= = = = = = =

1.40 50 5 80 215 3.5 60.2

kN mm mm mm N/mm2 mm kN OK

DesignforFinPlate&connection3 Spacingofbolt Momentatconnection Tensionatanchorbolt Using2M12AnchorBolt DesignresistanceforTensileforceofoneanchorbolt DesignTensilestrength Spacingofbolt Tensilestrengthofbolt Tensionatanchorbolt CheckforFinPlate Ch k f i l Momentatfinplate YeildstrengthofMildsteel Platewidth RequiredPlasticModulus bd2/6 Requiredthicknessofplate Usethicknessofstainlesssteel U thi k f t i l t l

= = =

60 0.21 3.5

mm kNm kN

= = = = = = =

37.9 120 113.7 3.5 0.070 460 100.000

kN mm kN kN kNm N/mm2 mm

OK

= = =

0.153 3.029 9

cm3 mm mm

OK

Welds Shearatconnection Lengthofweld,l Filletwelds,s Effectivelengthofweld,lwe=2(l2s) For6mmfilletweldsgrade43,Pw Throatsize,a=0.7s Capacityoffilletweld,Pweld=Pw.lwe.a

= = = = = = =

0.21 100 6 176 215 4.2 158.9

kN mm mm mm N/mm2 mm kN OK

DesignforFinPlate&connection4 f Spacingofbolt Momentatconnection Tensionatanchorbolt Using2M12AnchorBolt DesignresistanceforTensileforceofoneanchorbolt DesignTensilestrength Spacingofbolt Tensilestrengthofbolt Tensile strength of bolt Tensionatanchorbolt CheckforBasePlate Momentatbaseplate YeildstrengthofMildsteel Platewidth RequiredPlasticModulus bd2/6 Requiredthicknessofplate Usethicknessofstainlesssteel Welds Shearatconnection Lengthofweld,l Filletwelds,s g , ( ) Effectivelengthofweld,lwe=2(l2s) For6mmfilletweldsgrade43,Pw Throatsize,a=0.7s Capacityoffilletweld,Pweld=Pw.lwe.a

= = =

70 2.80 40.0

mm kNm kN

= = = =

37.9 70 113.7 113 7 40.0

kN mm kN kN

OK

= = =

1.000 460 150.0

kNm N/mm2 mm

= = =

2.174 2 174 9.325 10

cm3 mm mm

OK

= = = = = = =

2.80 200 6 376 215 4.2 339.5

kN mm mm mm N/mm2 mm kN OK

You might also like