Scribd
Upload
34 views4 pages

Important: Check To Have Copied All Beams - Zip Files in The Active Folder!

This program allows users to analyze beams and calculate support pressures, stresses, and force diagrams. It supports a variety of beam materials, cross sections, and load combinations. The interface provides options to define beam properties, apply loads, view results, and save output files. Users can analyze ideal or real beams, specify supports and loads, and generate diagrams of bending moment, shear force, and normal stress.

Uploaded by

apache2
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
34 views4 pages

Important: Check To Have Copied All Beams - Zip Files in The Active Folder!

This program allows users to analyze beams and calculate support pressures, stresses, and force diagrams. It supports a variety of beam materials, cross sections, and load combinations. The interface provides options to define beam properties, apply loads, view results, and save output files. Users can analyze ideal or real beams, specify supports and loads, and generate diagrams of bending moment, shear force, and normal stress.

Uploaded by

apache2
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 4

The first program that helps any kind of engineer in studying beams and Saint-Venant problems.

The programs calculates support pressures and stress graphics of many isostatic support solutions
and any kind and combination of loads. There is moreover the opportunity to chose ideal or real
beams and, for the last one, to chose material and section with their characteristics. A very easy
interface will help you everywhere and will give you the chance to choice your solution and also to
compare graphics with double display option and to save them.

Important: check to have copied all beams.zip files in the active folder!

Example:
Analyse a 20m iron fixed beams with a “double T” geometry and a concentrated load of 1000 N
with an angle of 45° positioned at 15m from the left side (5 from the right side).
Enter Beams() and, when ready, press F1.
Enter 20 in length space and chose help both for metal and geometry:

Enter
Select your metal (iron): the program automatically take the correct density value (you van modify
it in a second time).

Enter
Now chose the geometry of the section your beam and enter its dimensions:

Enter
Now program data has automatically updated:

If you want to analyse an ideal beam just type 0 for Density and Section Area.
Enter
Press F2 to chose your supports:

Enter
Chose fixed side (for example the left side) and press Enter
Press F3 to chose your load, select the lower window (concentrated loads) and enter load’s data:

Remember that xl is from left side to right side of the beam. Press Enter
If you want you can use F3 another time to add how many loads you want.

Now your problem is completely defined: you can see the picture of the beam with supports and
requested loads (remember that there is also the hided beams weight).

Press F4 to run the program.


The program shows first the forces in the supports and second their absolute values:

Press Enter to display the analysis home screen:

You can select:


F1: Redraw beam and forces after a graphic trace.
F2: Shows support absolute values.
F3: Trace Bending Moment, Shear and Normal Force on the beam
F4: Allows to compare two graphics: Bending Moment & Shear, Shear & Normal Force etc.
Esc: Quit the program. You can chose if you want to save data or not.

Example: try to trace Bending Moment, Shear and Normal Force.


Press F3 and chose alternately 1, 2 and 3
This program has been already used many times without problems. If you find any bug first assure
you to have selected the English language in the Mode and not to have translated the code with any
program. If the problem persists, please, let me know.
For a better and faster answer, please, enclose some screenshot of the bug: entered inputs, expected
outputs, error messages, erroneous code line, Mode setting… it will help me very much!
My address is [email protected]; write TI-Program as Object of e- mail!

IN ORDER TO PREVENT SPAMMING, E-MAIL WITHOUT THE CORRECT OBJECT


WILL BE AUTOMATICALLY DELETED!

You can find all my programs at this address:


http://www.ticalc.org/archives/files/authors/44/4458.html.

Remember to vote this program in the site!

Paolo Silingardi

You might also like