DIRECTV Universal Remote Control Users Guide

TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Features and Functions . . . . . . . . . . . . . . . . . . .4
Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Installing Batteries . . . . . . . . . . . . . . . . . . . . . .8 Controlling DIRECTV Receiver. . . . . . . . . . . . . .9

Programming DIRECTV Remote . . . . . . . . . . . . . . . . . . .9 Setup Codes for DIRECTV Receivers . . . . . . . . . . . . . . .10 Setup Codes for DIRECTV HD Receivers . . . . . . . . . . . . .10 Setup Codes for DIRECTV DVRs . . . . . . . . . . . . . . . . . .10

Programming to Control Your TV. . . . . . . . . . . . . .11

Programming the TV Input Key . . . . . . . . . . . . . . . . . . .11 Deactivate the TV Input Select Key . . . . . . . . . . . . . . . .11

Programming Other Component Controls . . . . . .12 Manufacturer Codes . . . . . . . . . . . . . . . . . . . . . .13

Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Setup Codes for VCRs . . . . . . . . . . . . . . . . . . . . . . . . . .16 Setup Codes for DVD Players . . . . . . . . . . . . . . . . . . . .19 Setup Codes for Stereo Receivers . . . . . . . . . . . . . . . . .20 Setup Codes for Stereo Amplifiers . . . . . . . . . . . . . . . .22

Searching For Your Code in AV1 or AV2 Mode . . . .23 Verifying The Codes . . . . . . . . . . . . . . . . . . . . . . .23 Changing Volume Lock . . . . . . . . . . . . . . . . . . . .24 Restore Factory Default Settings . . . . . . . . . . . . .25 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .26 Repair or Replacement Policy . . . . . . . . . . . . . . .27 Additional Information . . . . . . . . . . . . . . . . . . . .28

INTRODUCTION
Congratulations! You now have an exclusive DIRECTV Universal Remote Control that will control four components, including a DIRECTV Receiver, TV, and two stereo or video components (e.g 2nd TV, DVD, or stereo). Moreover, its sophisticated technology allows you to consolidate the clutter of your original remote controls into one easy-to-use unit that's packed with features such as: Four-position slide switch for easy component selection Code library for popular video and stereo components Code search to help program control of older or discontinued components Memory protection to ensure you will not have to reprogram the remote when the batteries are replaced Before using your DIRECTV Universal Remote Control, you may need to program it to operate with your particular component. Please follow the instructions detailed in this guide to set up your DIRECTV Universal Remote Control so you can start enjoying its features.

FEATURES AND FUNCTIONS

Key Charts
Slide the 4-position switch under AV1, AV2 or TV to select the component you want to control. A green LED under the switch position will confirm the component being controlled. Press TV INPUT to select the available inputs on your TV.
(Note: Additional programming is required to activate the TV INPUT key. See instructions on page 11).

Press FORMAT to cycle through the resolution and screen formats. Each press of the key cycles to the next available format and /or resolution.
(Not available on all DIRECTV Receivers)

Press PWR to turn on or off the selected component. Press TV POWER ON/OFF to turn the TV and DIRECTV Receiver on or off.
(Note: These keys are only active after the TV has been programmed, see page 11).

continued on next page...

FEATURES AND FUNCTIONS

Key Charts (continued)
Use these keys to control your DVR, VCR, DVD, or CD/DVD player. To record a program, press the record key twice.

Use GUIDE to display the DIRECTV program guide.

Press ACTIVE to access special features, services, DIRECTV NEWS and info. Press LIST to display your TO DO list of programs.
(Not available on all DIRECTV Receivers)

Press EXIT to exit menu screens and the program guide. Use the arrow keys to move around in the program guide and menu screens.

Press SELECT to choose highlighted items in the menu screens or in the program guide.

continued on next page...

FEATURES AND FUNCTIONS

Key Charts (Continued)
Press BACK to return to the previously displayed screen. Press MENU to display the menu.

Use INFO to display the current channel and program information when watching live TV or in the guide. Press the YELLOW key to cycle through the available alternate audio tracks. These colored keys may give you more functionality. Refer to your DIRECTV Receivers user guide.
(Not available on all DIRECTV Receivers)

Use VOL to raise (or lower) the sound volume. The Volume keys are only active when programmed.

While watching TV, use CHAN (or ) to select the next higher (or lower) channel. While in the DIRECTV program guide or menu, use PAGE (or ) to page up (or down) through available channels in the program guide.
continued on next page...

FEATURES AND FUNCTIONS

Key Charts (Continued)
Press MUTE to turn the sound off or back on.

Press PREV to return to the last channel viewed.

Press the number keys to directly select a channel (e.g. 207). Press DASH to separate the main and sub-channel numbers.

INSTALLING BATTERIES

1.

On the back of the remote control, push down on the door (as shown), slide the battery cover off, and remove the used batteries. Obtain two (2) new AA alkaline batteries. Match their + and - marks to the + and - marks in the battery case, then insert them. Slide the cover back on until battery door clicks into place.

2.

3.

CONTROLLING DIRECTV RECEIVER

The DIRECTV Universal Remote Control is designed to give you access to features and functions found on your original remote control. To use it with your brand of DIRECTV Receiver, you will need to program the remote control by performing the following steps.

Programming DIRECTV Remote

1. Locate the DIRECTV Receiver's brand and model number (on the back or bottom panel) and write it in the spaces below. Locate the 5-digit code for your DIRECTV Receiver (see page 10). Power on the DIRECTV Receiver. Move the slide switch to DIRECTV icon. Press and hold in the MUTE and SELECT keys until the green light under the DIRECTV icon flashes twice and then release both keys. Using the number keys enter the 5-digit code. If performed correctly the green light under the DIRECTV icon will flash twice. Aim the remote at your DIRECTV Receiver and press that the power key once. The DIRECTV Receiver should turn off. If it does not turn off, repeat steps 3 and 4, trying each code for your brand until you find the correct code. For future reference write down the working code for your DIRECTV Receiver in the blocks below:

2. 3. 4. 5.

6.

7.

8.

DIRECTV CODE:

BRAND:

MODEL:

ABOUT DIRECTV CONTROL

Setup Codes for DIRECTV Receivers
DIRECTV Model D-10 00001, 00002 Hughes Network Systems (most models) 00749 Hughes Network Systems models GAEB0, GAEB0A, GCEB0, GCEB0A, HBH-SA, and HAH-SA 01749 GE models GRD33G2A and GRD33G3A, GRD122GW 00566 Hitachi model HDS210R 00819 Mitsubishi HD models SRHD400 and SRHD500 00749 Panasonic models TZ-DBS01 and TZ-DRD100 00247 Panasonic models TUIRD10 and TUIRD20 00701 Philips models DSX5150R,DSX525R/I, DSX5350R, DSX5353R, DSX5353X, and DSX5375R 01076 Philips models DSX5500 and DSX5400 00099 Proscan models PRD8630A and PRD8650B 00566 RCA models DRD102RW, DRD203RW, DRD301RA, DRD302RA, DRD303RA, DRD403RA, DRD703RA, DRD502RB, DRD 503RB, DRD505RB, DRD515RB, DRD523RB, and DRD705RB 00566 RCA models DRD202RD, DRD221RD, DRD222RD, DRD223RD DRD225RD, DRD420RE, DRD440RE, DRD460RE, DRD480RE, DRD430RG, DRD431RG, DRD450RG, DRD451RG, DRD485RG, DRD486RG, DRD430RGA, DRD450RGA, DRD485RGA, DRD435RH, DRD455RH, and DRD486RH 00392 Samsung model SIR-S60W 01109 Samsung models SIR-S70, SIR-S75, SIR-S300W, and SIR-S310W 01108 Sony models (All models except TiVo and Ultimate TV) 01639 Toshiba model TSR101DSS 00790 Uniden model UDS100 00724

Setup Codes for DIRECTV HD Receivers

DIRECTV Model H-10 Hitachi model 61HDX98B HNS models HIRD-E8, HTL-HD LG model LSS-3200A, HTL-HD Mitsubishi model SR-HD5 Philips model DSHD800R Proscan model PSHD105 RCA models DTC-100, DTC-210 Samsung model SIR-TS160 Samsung models SIR-TS360 Sony models SAT-HD100, 200,300 Toshiba models DST-3000, DST-3100, DW65X91 Zenith models DTV1080, HD-SAT520 00001, 00002 00819 01750 01750 01749, 00749 01749 00392 00392 01276 01609 01639 01749, 01285 01856

Setup Codes for DIRECTV DVRs

HNS models SD-DVR80, SD-DV40, SD-DVR120, HDVR2, GXCEBOT, GXCEBOTD Philips models DSR704, DSR708, DSR6000, DSR600R, DRS700/17 RCA models DWD490RE, DWD496RG RCA models DVR39, 40, 80, 120 Sony model SAT-T60 Sony model SAT-W60 Samsung models SIR-S4040R, SIR-S4080R, SIR-S4120R 01442 01142, 01442 01392 01442 00639 01640 01442

10

PROGRAMMING TO CONTROL YOUR TV

Now that you have successfully programmed the new DIRECTV remote to operate your DIRECTV Receiver, you will want to program this remote to control your TV. 1. Turn the TV on.
NOTE: Please read steps 2-5 completely before proceeding. Highlight or write down the codes and component you wish to program before moving on to step 2.

2. 3. 4.

Locate the 5-digit code for your TV (see pages 13-16). Move the slide switch to TV. Press and hold in the MUTE and SELECT keys at the same time until the green light under the TV icon flashes twice and then release both keys. Using the number keys enter the 5-digit code for your brand of TV. If performed correctly the green light under TV will flash twice. Aim the remote at your TV and press the power key once. The DIRECTV Receiver should turn off. If it does not turn off, repeat steps 3 and 4, trying each code for your brand until you find the correct code. For future reference write down the working code for your TV in the blocks below:

5.

6.

7.

PROGRAMMING THE TV INPUT KEY

Once you have programmed the DIRECTV remote control for your TV, you may want to activate the TV Input button. 1. 2. Move the slide switch to the position under TV icon. Press and hold the MUTE and SELECT keys until the green light under the TV icon flashes twice and then release both keys. Using the number keys enter in 9-6-0 (The green light under the TV icon will flash twice)

3.

You now have the ability to control the Input select feature for your TV.

DEACTIVATE THE TV INPUT SELECT KEY

If you want to hide the TV INPUT button, follow steps 1 through 3 from the previous section. Afterwards, the green light will blink 4 times. Pressing the TV INPUT key will now do nothing.

11

PROGRAMMING OTHER COMPONENT CONTROLS

The AV1 and AV2 switch position can be used to program a VCR, DVD, STEREO, 2nd DIRECTV Receiver or 2nd TV with the following instructions. 1. 2. 3. 4. Turn on the component (e.g. DVD Player) you wish to program. Locate the 5-digit code for your component (see pages 13-22). Move the slide switch under the AV1 (or AV2) icon. Press and hold the MUTE and SELECT keys at the same time until the green light under AV1 (or AV2) flashes twice and then release both keys. Using the number keys enter the 5-digit code for your brand of component being programmed. If performed correctly the green light under TV will flash twice. Aim the remote at your component and press the power key once. The component should turn off. If it does not turn off, repeat steps 3 and 4 trying each code for your brand until you find the correct code. Repeat steps 1 through 6 to program a new component under AV2 (or AV1). For future reference write down the working code for the component(s) programmed under AV1 and AV2 in the blocks below:

5.

6.

7. 8.

AV1:

COMPONENT:

AV2:

COMPONENT:

12

MANUFACTURER CODES
Setup Codes for TVs
Admiral Advent Aiko Akai Alaron Albatron Ambassador America Action Ampro Anam AOC Apex Digital Audiovox Belcor Bell & Howell Bradford Brockwood Broksonic Candle Carnivale Carver Celebrity Celera Changhong Citizen Clarion Concerto Contec Craig Crosley Crown Curtis Mathes 10093, 10463 10761, 10817, 10815, 10783, 10842 10092 10812, 10702, 10030, 10672 10179 10843, 10700 10177 10180 10751 10180 10030, 10019 10748, 10765, 10767 10451, 10180, 10092, 10623 10019 10154, 10016 10180 10019 10236, 10463 10030, 10056 10030 10054 10000 10765 10765 10060, 10030, 10056, 10092 10180 10056 10180 10180 10054 10180 10047, 10054, 10154, 10451, 10093, 10060, 10702, 10030, 10145, 10166, 10056, 11147, 10016, 10466, 11347 10180 10451, 11661, 10092, 10672, 10019, 10623 10019 10145 10017, 10019 10463, 10180, 10178, 10171 10774, 10720 10000 10017, 11661 10154, 10236, 10463, 10180, 10178, 10171, 10019, 10177, 10623, 10179 10030 10154 10809, 10683, 10179, 10853 10180, 10171, 10179 10180 11755, 11756 11447, 10047, 10051, 10451, 10178, 10021, 11347, 11147 10017, 10030, 10019 10030, 10178, 10019 10180, 10179
continued on the next page

CXC Daewoo Daytron Denon Dumont Durabrand Dwin Electroband Elektra Emerson Envision Fisher Fujitsu Funai Futuretech Gateway GE Gibralter GoldStar Grunpy

13

MANUFACTURER CODES
Setup Codes for TVs (continued)
Hallmark Harley Davidson Harman/Kardon Harvard Havermy Hello Kitty Himitsu Hisense Hitachi Hyundai Infinity Inteq JBL JCB Jensen JVC KEC Kenwood KLH KTV LG Logik Luxman LXI Magnavox Majestic Marantz Matsushita Megapower Megatron Memorex MGA Midland Minutz Mitsubishi Monivision Motorola MTC Multitech NAD NEC Nikko Norcent NTC Onwa Optimus Optonica Orion Panasonic Penney Philco Philips Pilot Pioneer Portland 10178 10179 10054 10180 10093 10451 10180 10748 11145, 10145, 10016, 10151, 10056 10849 10054 10017 10054 10000 10761, 10817, 10815 10053 10180 10030, 10019 10765, 10767 10180, 10030 10856 10016 10056 10047, 10054, 10154, 10156, 10178 11454, 10054, 10030, 10706, 10179, 11254 10016 10054, 10030, 10704 10250, 10650 10700 10178, 10145 10154, 10463, 10150, 10178, 10179, 10016 10150, 10030, 10178, 10019 10047, 10017, 10051 10021 10093, 11250, 10150, 10178, 10836, 10019 10700, 10843 10093 10060, 10030, 10019, 10056 10180 10156, 10178, 10866 10030, 11704, 10019, 10497, 10056 10030, 10178, 10092 10748, 10824 10092 10180 10154, 10250, 10166, 10650 10093 10236, 10463, 10179 10250, 10051, 10650 10047, 10156, 10051, 10060, 10030, 10178, 10021, 10019, 11347 10054, 10030, 10019 11454, 10054, 10690 10030, 10019 10166, 10866, 10679 10019, 10092
continued on next page

14

MANUFACTURER CODES
Setup Codes for TVs (continued)
Prima Princeton Prism Proscan Proton Pulsar Quasar RadioShack RCA Realistic Runco Sampo Samsung Sansui Sanyo Scimitsu Scotch Scott Sears Sharp Sheng Chia Shogun Signature Sony Soundesign Squareview SSS Starlite Studio Experience Supreme SVA Sylvania Symphonic Tandy Tatung Technics Technol Ace Techwood Teknika Telefunken TMK TNCi Toshiba TVS V Inc. Vector Research Victor Vidikron Vidtech Viewsonic 10761, 10783, 10817, 10815 10700, 10717 10051 11447, 10047, 11347 10178, 10466 10017, 10019 10250, 10051, 10650 10047, 10154, 10180, 10030, 10178, 10019, 10056 11447, 10047, 10019, 10679, 11247, 11547, 10090, 11147, 11047, 11347 10154, 10180, 10030, 10178, 10056, 10019 10017, 10030, 10603, 10497 10030, 11755 10060, 10812, 10702, 10030, 10178, 10019, 10766, 11060, 10056, 10814 10463 10154 10019 10178 10236, 10180, 10178, 10179, 10019 10047, 10054, 10154, 10156, 10178, 10171, 10179, 10056 10093, 10689, 10688, 10851, 10818 10093 10019 10016 11100, 10000, 10834 10180, 10178, 10179 10171 10180, 10019 10180 10843 10000 10748 10054, 10030, 10171 10180, 10171 10093 11756 10250, 10051 10179 10051, 10056 10054, 10180, 10150, 10060, 10019, 10179, 10016, 10056, 10092 10702, 10056 10178, 10177, 10056 10017 10154, 11256, 10156, 10060, 11704, 10845, 11656, 10650, 11356 10463 11756 10030 10053 10054 10178, 10019 11755
continued on the next page...

15

MANUFACTURER CODES
Setup Codes for TVs (continued)
Wards Waycon White Westinghouse Yamaha Zenith 10054, 10030, 10178, 10019, 10179, 10016, 10021, 10056, 10866 10156 10463, 10623 10030, 10019 10017, 10463, 10178, 10016, 10092

Setup Codes for VCRs:

ABS Admiral Adventura Aiko Aiwa Akai Alienware America Action American High Asha Audiovox Beaumark Bell & Howell Broksonic Calix Canon Carver CCE Citizen Colt Craig Curtis Mathes Cybernex CyberPower Daewoo Dell Denon Durabrand Dynatech Electrohome Electrophonic Emerex Emerson Fisher Fuji Funai Garrard Gateway GE Go Video GoldStar Gradiente Harley Davidson Harman/Kardon Harwood 21972 20048, 20209 20000 20278 20037, 20000 20041 21972 20278 20035 20240 20037, 20278 20240 20104 20184, 20121, 20209, 20002, 21479, 20479 20037 20035 20081 20072, 20278 20037, 20278, 21278 20072 20037, 20047, 20240, 20072 20060, 20035, 20162, 20041, 21035 20240 21972 20045, 20278, 21278 21972 20042 20039, 20038 20000 20037 20037 20032 20037, 20184, 20000, 20121, 20043, 20209, 20002, 20278, 21278, 20479, 21479 20047, 20104 20035, 20033 20000 20000 21972 20060, 20035, 20240, 21035, 20807, 21060 20432 20037, 20038, 21237 20000 20000 20081, 20038 20072
continued on the next page...

16

MANUFACTURER CODES
Setup Codes for VCRs (continued)
Hewlett Packard HI-Q Hitachi Howard Computers HP Hughes Network Systems iBUYPOWER Jensen JVC KEC Kenwood KLH Kodak Lloyd's Logik LXI Magnasonic Magnavox Magnin Marantz Marta Matsushita Media Center PC MEI Memorex MGA MGN Technology Microsoft Mind Minolta Mitsubishi Motorola MTC Multitech NEC Nikko Noblex Northgate Olympus Optimus Orion Panasonic Penney Pentax Philco Philips Pilot Pioneer Polk Audio Profitronic Proscan Protec Pulsar 21972 20047 20000, 20042, 20041 21972 21972 20042 21972 20041 20067, 20041 20037, 20278 20067, 20041, 20038 20072 20035, 20037 20000 20072 20037 1278 20035, 20039, 20081, 20000, 20149, 21781 20240 20035, 20081 20037 20035, 20162 21972 20035 20035, 20162, 20037, 20048, 20039, 20047, 20240, 20000, 20104, 20209, 21237, 20479 20240, 20043 20240 21972 21972 20042 20067, 20043, 20807 20035, 20048 20240, 20000 20000, 20072 20104, 20067, 20041, 20038 20037 20240 21972 20035 21062, 20162, 20037, 20048, 20104, 20432 20184, 20209, 20002, 20479, 21479 21062, 20035, 20162, 21035, 20616, 20225 20035, 20037, 20240, 20042, 20038, 21035, 21237 20042 20035, 20479 20035, 20081, 20618 20037 20067 20081 20240 20060, 21060 20072 20039
continued on the next page...

17

MANUFACTURER CODES
Setup Codes for VCRs (continued)
Quasar RadioShack Radix Randex RCA Realistic ReplayTV Runco Samsung Sanky Sansui Sanyo Scott Sears Sharp Shogun Singer Sonic Blue Sony STS Sylvania Symphonic Systemax Tagar Systems Tatung Teac Technics Teknika Thomas Tivo TMK Toshiba Totevision Touch Unitech Vector Vector Research Video Concepts Videomagic Videosonic Viewsonic Villain Wards 20000, 20042, White Westinghouse XR-1000 Yamaha Zenith ZT Group 20035, 20162, 21035 20000 20037 20037 20060, 20240, 20042, 20149, 21035, 20880, 20807, 21060 20035, 20037, 20048, 20047, 20000, 20104 20616, 20614 20039 20240, 20045, 21014 20048, 20039 20000, 20067, 20209, 20041, 20479, 21479 20047, 20240, 20104 20184, 20045, 20121, 20043 20035, 20037, 20047, 20000, 20042, 20104, 21237 20048, 20807 20240 20072 20616, 20614 20035, 20032, 20033, 20000, 21232, 20636, 21972 20042 20035, 20081, 20000, 20043, 21781 20000 21972 21972 20041 20000, 20041 20035, 20162 20035, 20037, 20000 20000 20618, 20636 20240 20045, 20043, 21145, 20845, 21972 20037, 20240 21972 20240 20045 20038 20045 20037 20240 21972 20000 20060, 20035, 20048, 20047, 20081, 20240, 20072, 20149 20209, 20072 20035, 20000, 20072 20038 20039, 20033, 20000, 20209, 21479, 20479 21972

18

MANUFACTURER CODES
Setup Codes for DVD Players
Advent Akai Allegro Apex Digital Audiovox Axion Blaupunkt Blue Parade Broksonic CineVision Coby Curtis Mathes CyberHome Daewoo Denon Dual DVD2000 Emerson Enterprise Fisher Funai GE Go Video GPX Greenhill Hitachi Hiteker Initial Jensen JVC Kenwood KLH Koss Lasonic Magnavox Marantz Memorex Microsoft Mintek Mitsubishi Nesa Norcent Onkyo Oritron Panasonic Philips Pioneer Polaroid Polk Audio Prima Proscan Qwestar RCA Rio 21016 20899 20869 20672, 20717, 20794, 20830, 21061, 20755, 20797, 21056, 20796, 21020, 21100 21072, 21071 21072, 21071 20717 20571 20868, 20695 20876, 20869 21086 21087 21024, 21023, 20816 20784, 20869, 20833 20490 21085, 21068 20521 20591, 20821, 20675 20591 20670 20675 20522, 20815, 20717 20744, 20783, 21075, 20869, 20715, 20833 20699 20717 20573, 20664 20672 20717 21016 20558, 20623, 20867 20490, 20534 20717, 21020 20651 20798 20503, 20821, 20675 20539 20695 20522 20839, 20717 21521, 20521 20717 21003 20503 20651 20490, 21762, 20632, 21490, 21462, 21362 20503, 20539, 20646, 20885, 20854 20525, 20571, 20632 21061, 21086 20539 21016 20522 20651 20522, 20571, 20717, 21022, 20822 20869
continued on next page...

19

MANUFACTURER CODES
Setup Codes for DVD Players (continued)
Rotel Rowa Samsung Sansui Sanyo Sharp Shinsonic Sonic Blue Sony Superscan Sylvania Symphonic Technics Theta Digital Toshiba Tredex Urban Concepts US Logic Xbox Yamaha Zenith 20623 20823 20490, 20573, 20820, 21075, 20899 20695 20873, 20695, 20670 20630 20533, 20839 20869 20533, 20864, 21033, 22043, 22020 20821 20821, 20675 20675 20490 20571 20503, 20695, 21045 20799 20503 20839 20522 20490, 20539, 20545 20503, 20591, 20869

Setup Codes for Stereo Receivers:

ADC Aiwa Akai Alco Amphion Media Works AMW Anam Apex Digital Arcam Audiotronic Audiovox Bose Brix Cambridge Soundworks Capetronic Carver Casio Clarinette Classic Coby Criterion Curtis Mathes Daewoo Dell Denon Fisher Garrard Gateway Go Video 30531 31405, 30158, 30189, 31388, 30121, 30405, 31641 31512 31390 31615, 31563 31615, 31563 31609, 31074 31430, 31257 31120 31189 31390 31229, 30639 31602 31370 30531 31189, 30189, 30042 30195 30195 31352 31389 31420 30080 31250 31383 31360, 30004 31801, 30042 30463 31517 31532
continued on next page...

20

MANUFACTURER CODES
Setup Codes for Stereo Receivers (continued)
Harman/Kardon Hewlett Packard Hitachi Initial Integra JBL JVC Kenwood KLH Koss Lasonic Lenoxx Linn Liquid Video Lloyd's LXI Magnavox Marantz MCS Mitsubishi Modulaire Nakamichi Norcent Onkyo Optimus Oritron Panasonic Penney Philco Philips Pioneer Polaroid Polk Audio Proscan Quasar RCA Realistic Regent Rio Saba Samsung Sansui Sanyo Sharp Sharper Image Sherwood Shinsonic Sonic Blue Sony 30110, 30189, 30891 31181 31801 31426 31298, 30135 30110, 31306 30074, 31495, 31374 31313, 31570, 31569, 30027, 30186, 30042, 30239 31412, 31390, 31428 31366 31798 31437 30189 31497 30195 30181 31189, 31269, 30189, 30195, 30531, 31514, 30391 31189, 31269, 30039, 30189, 31289 30039 31393 30195 30097 31389 30135, 31531, 31298, 30842 31023, 30738, 31074, 30181, 30670, 30080, 30531, 30801, 30042, 30186 31497, 31366 31518, 30039, 31288, 31763, 30367, 30309, 31316, 31764 30195 31390 31189, 31269, 30189, 31120, 30391, 31266 31023, 30014, 30244, 30150, 30630, 30080, 30531, 31384 31508 30189, 31289 31254 30039 31023, 31609, 31254, 30080, 31074, 31511, 31390, 30531 30195, 30181 31437 31869, 31383 31519 31500, 31295 30189 31469, 31251, 30801 31286, 30186 31556 31653, 30502, 30491 31426 31869, 31532, 31383 31058, 31441, 31258, 31759, 30158, 31658, 31858, 30474, 31349, 31558, 31442, 31758
continued on next page...

21

MANUFACTURER CODES
Setup Codes for Stereo Receivers (continued)
Soundesign Stereophonics Sunfire Teac Technics Thorens Venturer Victor Wards Yamaha Yorx Zenith 30670 31023 31313 30463, 31528, 31390, 31074 31308, 31518, 30039, 30309 31189 31390 30074 30158, 30189, 30080, 30014 30176, 30186, 31375, 31331, 31176 30195 31293, 30857, 31869

Setup Codes for Stereo Amplifiers

Aiwa Bose Carver Curtis Mathes Denon Durabrand GE Harman/Kardon JVC Left Coast Lenoxx Linn Luxman Magnavox Marantz Nakamichi NEC Optimus Panasonic Parasound Philips Pioneer Polk Audio RCA Realistic Sansui Shure Sony Soundesign Technics Victor Wards Yamaha 30406 30674 30269 30300 30160 31561 30078 30892 30331 30892 31561 30269 30165 30269 30892, 30321, 30269 30321 30264 30395, 30300 30308, 30521 30246 30892, 30269 30300, 30013 30892, 30269 30300 30395 30321 30264 30689, 30815, 30220 30078, 30211 30521, 30308 30331 30078, 30013, 30211 30354, 30143, 30133

22

SEARCHING FOR YOUR CODE IN AV1 OR AV2 MODE

If you were unable to find the code for your brand of TV or component, then you can try a code search. This process may take up to 30 minutes. 1. 2. 3. Turn on the TV or component. Move the slide switch to the AV1, AV2 or TV position. Press and hold the MUTE and SELECT keys at the same time until the green light under the selected switch position flashes twice and then release both keys. Enter in 9-9-1 followed by one of the following 4-digits: COMPONENT TYPE Satellite TV VCR/DVD/PVR STEREO 6. COMPONENT ID # 0 1 2 3

4.

Point the remote at the TV or component and press CHAN . Repeatedly press the CHAN until the TV or component turns off. Note: Every time CHAN is pressed the remote advances to the
next code and power is transmitted to the component

7.

When the TV or component turns off, stop pressing the CHAN key. Then, press and release the SELECT key.
NOTE: If the light flashes 3 times before the TV or component responds, then you've cycled through all codes and unfortunately the code you need is not available. You must use the remote that came with your TV or component.

VERIFYING THE CODES

If you have setup the DIRECTV Universal Remote Control using the SEARCHING FOR YOUR CODE PROCEDURE, you can find out the 5-digit code your component responded to with the following instructions: 1. 2. Move the slide switch to appropriate position. Press and hold the MUTE and SELECT keys at the same time until the green light under the selected switch flashes twice and then release both keys. Enter in 9-9-0 (The green light under the selected switch position will flash twice) To view the first digit in the code, Press and release the number 1 key. Wait three seconds, and count the number of times the green light flashes. Write this number down in the leftmost TV, AV1 or AV2 code box found on pages 11 or 12.
Note: If this part of the code is "0" the light will not flash

3. 4.

23

5.

Repeat step 4 four more times for the remaining digits. Press number 2 for the second digit, 3 for the third digit, 4 for the fourth digit and 5 for the final digit.

CHANGING VOLUME LOCK

Depending on how you set up your remote, the VOL and MUTE may control the volume only on your TV or other components, regardless of which position the switch is under. This remote can be programmed so that the VOL and MUTE keys work ONLY with the component selected above the slide switch. To select this feature, perform the following steps: 1. Press and hold the MUTE and SELECT keys until the green light under the DIRECTV icon flashes twice and release both keys. Using the number keys, enter in 9-9-3 (the green light will flash twice after the 3). Press and release the VOL flash 4 times). key (the green light will

2. 3.

Now the VOL and MUTE keys will work ONLY for the component selected by the slide switch position.

To Lock Volume to AV1, AV2 or TV

1. 2. Move the slide switch to the AV1, AV2 or TV position to lock the volume. Press and hold the MUTE and SELECT keys until the green light under the selected switch flashes twice and release both keys. Using the number keys, enter 9-9-3 (the green light will flash twice). Press and release the SELECT key (the green light will flash twice).

3. 4.

24

RESTORE FACTORY DEFAULT SETTINGS

To reset all the functions of the remote control to the factory defaults (the original, out of the box setting), follow these steps. 1. Press and hold the MUTE and SELECT keys at the same time until the green light flashes twice and then release both keys Using the number keys, enter in 9-8-1 (the green light will flash 4 times).

2.

25

TROUBLESHOOTING
PROBLEM: Light at top of remote does not blink when you press a key. SOLUTION: Try replacing the batteries (see page 8). PROBLEM: Light at the top of the remote blinks when you press a key, but the home entertainment component does not respond. SOLUTION: Make sure you are aiming the DIRECTV Universal Remote Control at your home entertainment component and that you are within 15 feet of the component you are trying to control. PROBLEM: The DIRECTV Universal Remote Control does not control home entertainment component or commands are not recognized properly. SOLUTION: Try all listed codes for the device brand being set up. Make sure all home entertainment components can be operated with an infrared remote control. PROBLEM: TV/VCR combo does not respond properly. SOLUTION: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation (see page 12). PROBLEM: CHAN , CHAN your RCA TV. , and PREV do not work for

SOLUTION: Due to RCA design (1983-1987), only the original remote control will operate these functions. PROBLEM: Changing channels does not work properly. SOLUTION: If original remote control required pressing ENTER to change channels, press ENTER on the DIRECTV Universal remote control after entering a channel number. PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo. SOLUTION: For power on, these products require programming TV codes on the remote control. For Sony, use TV code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048.

26

REPAIR OR REPLACEMENT POLICY

If the DIRECTV Universal Remote Control does not function properly, DIRECTV will, at our sole discretion, repair or replace the DIRECTV Universal Remote Control, provided that: a. b. You are a customer of DIRECTV and your account is in good standing; and The problem with the DIRECTV Universal Remote Control was not caused by abuse, mishandling, alteration, accident, failure to follow operating, maintenance or environmental instructions set forth in this User Guide, or service performed by someone other than DIRECTV.

THE DIRECTV UNIVERSAL REMOTE CONTROL IS PROVIDED ON AN AS IS, AS AVAILABLE BASIS, SOLELY FOR YOUR NON-COMMERCIAL, RESIDENTIAL USE. DIRECTV DOES NOT MAKE ANY REPRESENTATIONS OR WARRANTIES OF ANY KIND, WHETHER STATUTORY, EXPRESS OR IMPLIED, REGARDING THE DIRECTV UNIVERSAL REMOTE CONTROL, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE OR IMPLIED WARRANTIES ARISING FROM A COURSE OF DEALING OR COURSE OF PERFORMANCE. DIRECTV EXPRESSLY DISCLAIMS ANY REPRESENTATION OR WARRANTY THAT THE DIRECTV UNIVERSAL REMOTE CONTROL WILL BE ERROR FREE. NO ORAL ADVICE OR WRITTEN INFORMATION GIVEN BY DIRECTV, ITS EMPLOYEES, AND LICENSORS OR THE LIKE SHALL CREATE A WARRANTY; NOR SHALL CUSTOMER RELY ON ANY SUCH INFORMATION OR ADVICE. UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL DIRECTV OR ANYONE ELSE INVOLVED IN ADMINISTERING, DISTRIBUTING, OR PROVIDING THE DIRECTV UNIVERSAL REMOTE CONTROL BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOSS OF REVENUES OR INABILITY TO USE THE DIRECTV UNIVERSAL REMOTE CONTROL, MISTAKES, OMISSIONS, INTERRUPTIONS, DEFECTS, FAILURE OF PERFORMANCE, EVEN IF DIRECTV HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES. Because some states do not allow the exclusion or limitation of liability for consequential or incidental damages, in such states, DIRECTVs liability is limited to the greatest extent permitted by law.

27

ADDITIONAL INFORMATION
This product does not have any user-serviceable parts. Opening the case, except for the battery cover, may cause permanent damage to your DIRECTV Universal Remote Control. For help via the Internet, visit us at: DIRECTV.com Or ask for technical support at: 1-800-531-5000 Copyright 2004 by DIRECTV, Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without prior written permission of DIRECTV, Inc. DIRECTV, the Cyclone Design logo and DIRECTV NEWS are registered trademarks of DIRECTV, Inc.. M2081A for use with the URC2081, DIRECTV Universal Remote Control. 12/04

COMPLIANCE WITH FCC RULES AND REGULATIONS

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

28

This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment. FCC Authorization Label This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC ID #: MG32081

29