Scribd
Upload
14 views

Experiment No. - Date

This document summarizes different types of sampling techniques used to convert analog signals to digital signals. It discusses the Nyquist sampling theorem which states the minimum sampling frequency must be greater than twice the maximum frequency of the signal. The three types of sampling techniques covered are ideal sampling, natural sampling, and flat top sampling. Ideal sampling produces samples equivalent to the instantaneous signal value. Natural sampling takes the shape of the analog signal during sampling. Flat top sampling holds the sample value constant during sampling.

Uploaded by

infinity_21
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
14 views

Experiment No. - Date

This document summarizes different types of sampling techniques used to convert analog signals to digital signals. It discusses the Nyquist sampling theorem which states the minimum sampling frequency must be greater than twice the maximum frequency of the signal. The three types of sampling techniques covered are ideal sampling, natural sampling, and flat top sampling. Ideal sampling produces samples equivalent to the instantaneous signal value. Natural sampling takes the shape of the analog signal during sampling. Flat top sampling holds the sample value constant during sampling.

Uploaded by

infinity_21
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

EXPERIMENT NO.

____

DATE: / /

AIM: To study different type of sampling technique.

APPARATUS: Sampling kit, DSO, testing probes, connecting wires.

THEORY:
The process in which analog signal is converted into the discrete valued signal, is called sampling. The Sampling Theorem states that a signal can be exactly reproduced if it is sampled at a frequency Fs, where Fs is greater than twice the maximum frequency Fmax in the signal.

Fs > 2Fmax
The frequency 2 Fmax is called the Nyquist sampling rate. Half of this value, Fmax, is sometimes called the Nyquist frequency. There are three type of sampling technique to convert analog signal to discrete signal: 1) Ideal Sampling 2) Natural Sampling 3) Flat Top Sampling

1) Ideal Sampling: The concept of instantaneous sampling is more of a mathematical abstraction as no practical sampling device can actually generate truly instantaneous samples. It produces samples equivalent to the instantaneous value of the continuous signal at the desired points. 2) Natural Sampling: In the analogue-to-digital conversion process an analogue waveform is sampled to form a series of pulses whose amplitude is the amplitude of the sampled waveform at the time the sample was taken. In natural sampling the pulse amplitude takes the shape of the analogue waveform for the period of the sampling pulse.

3) Flat Top Sampling: In flat top sampling, the amplitude of the sampled pulse is held constant at the value of the amplitude of the analogue waveform at the time the sampling period began.

Building block diagram of sampling

After sampling, message signal can be obtained by passing the sampled signal through low pass filter. This process is called reconstruction of message signal.

Message signal

carrier signal

OBSERVATION:

WAVEFORMS:

CONCLUSION:

SIGNATURE

You might also like